Spotlight on menu bar working on one mac but not on other...

On my father's Mac mini, I can put a file in his home folder and Spotlight on the menu bar will find it. This is not the case for my iBook however, as I have to either re-index my whole drive or search within my home folder using Finder to find my file. I can, however, find any other file outside my drive using the blue icon.
What have I done wrong?
Regards,
Adam

I've fixed it now. I realised that I had changed my home folder so Spotlight got confused. I changed the path in the NetInfo manager and everything's fine, for now...
Regards,
Adam

Similar Messages

  • IPhone 5 wifi works in one room but not the other.

    I have an iPhone 5 and the wifi is unreliable. It works in the room with the router but when I walk down the hall it doesn't work. I'm talking 20 feet away. So frustrating because the phone is almost worthless. Why would it connect but only in such close range? No other devices have this problem. Yes, I've turned the wifi on and off. Yes, I've restarted the router. Yes, I've checked the WEP. It just makes no sense that it would work in one room but not the next room. Help!

    Hello Gnpco,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/HT1365
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Best of luck,
    Mario

  • Encrypted message on one Mac, but not the other, from same server

    I run Mail.app on two Macs, both getting mail off the same Exchange server. Multiple times in the last few weeks, a message will download to one Mac and be fine, and then the other Mac will retrieve the message, and it will suddenly be encrypted. Before a bunch of garbled text, something like the following always appears:
    --000_25539419161D7744ABC322B480ED5DA507650F7Acmhprdexc04netj
    Content-Type: text/plain; charset="utf-8"
    Content-Transfer-Encoding: base64
    If you go to Webmail on the server, the message reads fine. And it is readable on the other Mac. I tried going to View/Message and choosing "next best alternative" but those options are grayed out. Could there be anything else set locally that is making the email unreadable on one machine but not the other? The unreadable version is always on this Mac (a Mac Mini) and not the other one (a MacBook), even though both are running the same OS version and Mail.app version.

    Navigate to your Applications folder.
    Right Click on iTunes and select Show Package Contents.
    Navigate to Contents/MacOS/
    Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
    Open System Preferences and go to Users & Groups.
    Select the Login Items tab to view the list.
    Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
    Delete it from Login Items on the Mac you don't want it to start iTunes on.

  • Classic - text ringtones work for one contact but not for others

    Just got the new Blackberry classic.  I'm having trouble with the ringtones for the text messages.  The custom ringtone works for one contact but not for the others.  I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A.  B sounds the default ringtone from the default profile instead of the custom ringtone.
    I have deleted all contacts and done a re-sync thinking something was corrupt.  That didn't work. 
    None of the contacts have a link. 
    I have changed the notification profile and it still doesn't work. 
    I have deleted a contact and recreated it manually.  It still doesn't work. 
    I finally deleted my dad's  contact and from the phone app created a new contact.  I set a custom ringtone for him and it worked.  I of course had to recreate all his other information manually.  Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
    I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone.  Also contact A has no hypen in the phone number and it rings the custom ringtone.  So that didn't seem to matter. 
    I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution. 
    Surely someone has found a fix for this issue.

    Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
    Note that the iPad cannot send SMS messages.

  • USB disk connected to TC shows on one Mac, but not the other

    Hi guys!
    The Time Capsule works just great! I'm running it bridged in my existing network, with WiFi turned off.
    And the USB disk shows fine on my Mac, but not on my colleagues' Mac. TC shows on both. What am I missing here?
    The USB disk will serve as "file server" and will be backed up onto TC together with the macs.
    Update: Whoa - now it suddenly shows up on both machines. Go figure.
    Message was edited by: Niklas Wikman

    Navigate to your Applications folder.
    Right Click on iTunes and select Show Package Contents.
    Navigate to Contents/MacOS/
    Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
    Open System Preferences and go to Users & Groups.
    Select the Login Items tab to view the list.
    Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
    Delete it from Login Items on the Mac you don't want it to start iTunes on.

  • Magic Mouse One-Finger Swipe Works for one user but not the other

    For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?

    my /etc/group:
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:
    disk::6:root
    lp::7:daemon
    mem::8:
    kmem::9:
    wheel::10:root,hans,ibm,gast
    ftp::11:
    mail::12:
    uucp:x:14:
    log::19:root
    locate:x:21:
    smmsp::25:
    http::33:
    games::50:
    network:x:90:
    video:x:91:
    audio::92:ibm,gast
    optical::93:hal
    floppy:x:94:hal
    storage:x:95:hal
    scanner:x:96:
    power:x:98:
    nobody::99:
    users::100:gast
    dbus:x:81:
    hans:x:1001:
    vboxusers:x:108:hans
    policykit:x:1002:
    hal:x:82:
    kvm:x:78:
    nx:x:85:nx
    avahi:x:84:
    camera:x:97:
    gdm:x:1003:
    gast:x:1004:

  • Enterprise Mgr works with one db but not the other

    Hi
    We have two Oracle 10g databases installed. Enterprise Manager works with the second, but not the first. I believe the problem started when we migrated the host server to another network domain. Everything else works fine, but I'm getting a page load failure when attempting to access enterprise mgr.
    The second db was installed after the migration and EM works fine.
    Can anyone tell me how to reconfigure this?
    Thank you

    by any change hostname or ip was changed during migration
    also can u paste the emoms.trc ?

  • Ipod works on one computer but not the other?

    Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Patrick

  • Font works in one Document but not the other

    OK so we have been having trouble with this one font for a while now. For some strange reason it will download onto my bosses computer but it won't load onto mine. I have had some help to try to download it on my computer, which we thought was successful. We have one document that will open in InDesign correctly with out me needing to change the font so it will work. But I tried to create a new document with it today but it can't find it. I have tried to making paragraph styles for each one and then adding them to the library I use, but that did not work.
    I am running a Mac with OS 10.8.3 and I am using CS6. Also this font file kept telling me there was serious problems with them when I try to install them into Font Book.

    InDesign has a feature called Document Installed Fonts which allows a file to use fonts not installed on your system if they are contained in a folder named Document Fonts appearing in the same folder as the .indd file. That might explain why you can open an older file, but not use the font in a new file.
    What is the name, and type, of the font?

  • Keyboard works on one computer but not the other

    I have an aluminum wireless keyboard that came with my Mac Pro (Early 2008). Some time ago, it just stopped working. I tested the bluetooth mouse and a few other bluetooth peripherals to check that it wasn't the Mac Pro's bluetooth that was malfunctioning. I was convinced that the keyboard was broken, and was about to take it to the Apple Store to get it fixed when I thought that maybe I should test the keyboard on another computer. When I did that, it worked perfectly, but it still does not work with my Mac Pro. I've tried changing the batteries and removing the pairing from my Mac Pro. When I try to re-pair it, the Mac Pro is unable to discover it. Thank you in advance for your help.

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Patrick

  • ICal Subscription Works On One Computer But Not The Other

    I subscribed to a web based iCal subscription. The subscription refreshes on my Mac Mini but not on my desktop, which is connected to my iPhone. The iPhone therefore doesn't get the subscription contents either. I've tried deleting and resubscribing but nothing works.

    Hey Valenz0711,
    That definitely sounds frustrating. There are a few different reasons it may not be working on the iMac (iTunes is not up-to-date, Firewall Settings). The following article may provide more information on a resolution:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Thanks,
    Matt M.

  • Smart form PRINT PREVIEW working on one box but not on other box

    Hi Guys,
    I have one program which works on DV1 box but is not working on DV2 box. It is NOT giving short dump. In this program there is PRINT PREVIEW button. This print preview button is work in DV1 but not in DV2. DV1 & DV2 are ECC 6 and we installed SAP service pack.
    I will really appreciate if somebody can give me some direction.
    Thanks,
    mini

    Program is save in both the boxes. DV2 has SAP service pack, but DV1 not. I think this problem is related to FONTS not being supported by service pack.
    How can I fix this?
    Thanks,
    mini

  • Wireless internet access works on one Mac, but not another

    I have a Time Capsule connected via Ethernet to a Linksys ADSL2 gateway.
    I have set up a wireless network on the TC, which both Macs (MBP and MB) can see and log on to.
    The MacBook can get an internet connection wirelessly, the MBP can't.
    The MBP does get an internet connection if connected to the TC via an ethernet cable
    I have the connection assistant, but it get as far as asking for my airport password before giving up - I have entered the password correctly.
    Any suggestions?
    The MBP is running 10.5, the MB 10.4

    I have fixed the problem with a reinstall of OS X. Before that, i had tried trashing the keychain, repairing it an also deleting the wireless networks plist. No luck.
    Anyway, all OK now...

  • WiFi on my MacBook Pro works in one room but not in others

    If I bring my MacBook Pro next to an iMac in one room it will connect (albeit slowly) to the internet. When I walk 2 metres into my own bedroom it simply disconnects and stops working, while my phone stays connected and at a similar speed.
    The MacBook will recognise my WiFi, and will ask me for the password, even though it's been entered dozens of times. When  I enter this password it says it's incorrect. If I then walk back into the other room WiFi rrconnects.
    What's wrong here?
    My MacBook Pro is a late 2011 13" model.

    Wireless interference, probably, but Apple's Wireless Diagnostics may supply some additional helpful information.
    To use it, hold an option key while you click your Mac's Wi-Fi icon, and choose Open Wireless Diagnostics...
    The following authentication dialog will appear:
    Authenticate with your Admin password, then click the Continue button in the following:
    The network analysis and diagnostic tests will take several minutes to complete:
    When it completes, if your wireless network is functioning properly the following will result:
    If something is amiss, supposedly the results will be different and you will be presented with helpful information.
    Assuming your connection is "working as expected" select Continue to summary and click Continue:
    Ignore the pre-populated text field, which is provided as a place for you to type in additional information should Apple ask for it in the course of obtaining technical assistance from them. Apple has no way of knowing where your router is located in your home, and certainly doesn't know if you even have an upstairs bedroom closet.
    Click Continue.
    The next step will also take a few minutes:
    When it finishes, you will be presented with a summary that may or may not be useful to you:
    The above result is uninteresting, but if there are additional actions for you to consider they would be included in the screenshot above.
    The WirelessDiagnostics-xxx.tar.gz file deposited on your Desktop can be dragged to the Trash, or you may wish to expand it and examine its contents. It's up to you.

  • Mail / iCloud rejects password on one mac but not the other

    I have just upgraded my MacbookPro and my MacPro from 10.6 to 10.7.
    For whatever reason - the MBP works fine and can access all my email accounts, whilst the MP is constantly rejecting the password for iCloud.
    My Mobileme account was upgraded to iCloud several months ago and has been in daily use on both macs ever since.
    The only difference in the upgrades is that the MBP upgrade was not a clean install, whereas the MP was installed with a clean hard drive and then all apps/data was transfered over.
    Disk permissions have been repaired and that has made no difference.
    Both macs are on the same network, with the same passwords and same account settings. Any suggestion how i can resolve this problem?
    adam

    i solved the problem by adding a new mail account to Mail, re-inputting the email address and password, then deleting the old problematic one.
    works a treat!

Maybe you are looking for

  • Missing fonts in a new computer reinstall of illustrator 10

    I recently purchased a new Dell computer with Windows 8 operating system.  The Illustrator program is working yet a lot of my fonts are missing and have been replaced with generic fonts.  Am I missing something?

  • What is best way to do file i/o in ejbs?

    We have a text file with messages that the EJB tier needs access to. Currently we do file streaming but I know that doesn't allow the container to handle that activity properly in the advent of problems. What is the recommended way of dealing with fi

  • Populate existing excel file in presentation server

    Hi, My requirement is to populate an existing excel file in the presentation server. After the data has been uploaded the file needs to be saved in another name . Could someone help me out on this. thanks

  • Placing an anchor with respective character style

    Hi all, Write now i am going to start one new book. In that book, lot of marginal elements are coming in the end of each chapter. That Marginal Notes Paragraph style (Green color") fix with their respective Key Terms (KT or Magenta color) with the ob

  • Viewing G1 RAWs as thumbnails in Organiser 9

    Hi, I think I'm correct in stating that I cannot view my Panasonic G1 RAWs as thumbnails in Organiser 9, as I can in SilkyPix which was supplied with my G1. I'm very impressed with Elements 9, but my G1 RAWs just show up as RAW icons. They open fine