Spry Widget Slideshow Basic works on local but not on remote server

I have tried everything imaginable and I can't make this slideshow work from the remote server. I get the massages:
SpryPanelSet.js requires SpryWidget.js!
SpryFadingPanels.js requires SpryPanelSet.js!
SpryImageSlideShow.js requires SpryWidget.js!
SpryPanAndZoomPlugin.js requires SpryImageSlideShow.js!
Also the opening page has a preloader image that doesn't show up until the page is saved to my cache.
Here is the link to my website:
www.warpd.ca
Sylvie

When I compare your:
http://www.warpd.ca/SpryAssets/SpryWidget.js
to this one:
http://labs.adobe.com/technologies/spry/ui/includes/SpryWidget.js
I do not see the same file. Try uploading the correct file and check again.
Xav

Similar Messages

Slideshow works on local but not remote server?

Slideshow works on local but not remote server? The site is patriceclarkson.com.

When I compare your:
http://www.warpd.ca/SpryAssets/SpryWidget.js
to this one:
http://labs.adobe.com/technologies/spry/ui/includes/SpryWidget.js
I do not see the same file. Try uploading the correct file and check again.
Xav

Spry Widget SlideShow Basic (IE8 not showing all images)

Hi everyone:
I've read through the past posts, trying to find the solution so I wouldn't have to bother everyone if the solution to my problem was already here. I couldn't find it, although I did find similar posts about this problem but no out and out solution.
My problem:
I have added the Spry Image Slideshow-Basic into an .html page. The widget works well in Firefox, Chrome, Safari and IE7!! It does not work properly in IE8 as IE8 skips every second images...the even numbers. It does not work on my local computer and it also doesn't work on the server. I have uploaded all the files to the server and it still doesn't work properly.
I cannot seem to find the solution and I am reaching out to the great Adobe supporters for help.
You can see the test web page here:
http://www.fernweb.com/test/
There are six images in this group but it only shows numbers 1, 3 and 5.
Could someone please have a look and give me direction as to where the problem is?
Thanks so much everyone.
Daryl

The problem is with the Spry.Widget.ImageSlideShow.PanAndZoomPlugin
If you leave that out, then all is well
A dirty fix is to add the following to the HEAD section of your document
<meta http-equiv="X-UA-Compatible" content="IE=7" />

Spry Image Slideshow - Only see play button but not slideshow

Hi,
I am having trouble getting Spry Image Slideshow to work on my test site. Can somebody help me?
Problem:     I only see the "play" button spinning after it went live but cannot get the slideshow to appear.
Details:
     Dreamweaver CS5.5
     Widget :     Spry image Slideshow Basic 1.0 - (widget wid = "2141542")
     Mac OS 10.6.3
     Mozilla Firefox 8.0.1
               1. Inserted Spry Image Slideshow 1.0 widget into my page "ACS_shipping.html"
               2. Replaced sample pictures and thumbnail pictures with some of my test pictures.
               3. A list of thumbnails appears on my design page.
               3. Click on "Live View" button; only see the frame and the black background with the "play" button spinning on the screen.
               4. Uploaded files on server and found same result.
    Webpage Link:            locicompany.ca/ACS/ACS_shipping.html
Loci

I don't know what to say....I tried all night it didn't work. As soon as I posted my question on the forum the slideshow starts running....wow....I'm speechless. Thanks all who's looked at my post.
Loci

Applet working on local but not online

my applet working on local machine fine
but when i upload applet on my website
and access by my machine only interface
show and when i click the button of applet
no result produce....
thankx

It is only possible if you missed something for code or codebase attribute of Applet tag, I mean values for these attributes are fine for your local machine but not with the server you are using.

FLVplayback skin works in HTML locally, but not on a server.

I am developing a Flash based website that plays a video file using the FLVplayback component. Everything works fine locally, the paths are all relative and everything (index.html, the SWF with the FLVplayback and the skin SWF) is all in the same place. I have checked my paths and am certain they are correct.
once I upload everything to a server, my skin goes missing. Even though the video plays.
unusual? yes.
frusterating? yes.
solution? none in sight.
(sigh) I hope someone can help me here.
- Jeremy

Hi Linda,
As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
HTH,
Ram
Please vote as helpful or mark as answer, if it helps

Linked server problem, its works locally but not from remote machine

Hi,
i am using the application NAV and have written the query in the application. am using automation variable to link to the SQL Server.
The problem is that , the query which i have written executes only when i am working on local machine .
I mean when i want to execute the same query from remote machine through my app Dynamics NAV then its not getting executed.
Thanks in advance

Depends on what you are trying to do and what security you are using.
What error did you get?
If you are using windows authentication then take a look at delegation
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

X11 works locally but not from remote clients because DISPLAY is /tmp/...

I've used X11 plenty of times before, but not in a little while. Now, when I start X11 on two different accounts, the DISPLAY variable is /tmp/launch-*/org.x:0 . When I telnet to a remote host and set the DISPLAY variable to my hostname:0 (ie. graphe:0), xterm says it can't connect to the display.
If I set DISPLAY to localhost:0 and start a local xterm it complains too:
xterm Xt error: Can't open display: localhost:0
From scanning this forum, I believe this may have something to do with ssh, but on one of the accounts where I have this problem I don't even have ssh configured.
What's the deal?

ssh -X (or -Y) exports your local host DISPLAY environment over a secure ssh tunnel to the remote system, where it creates a local X11 port pointing at the remote end of the secure ssh tunnel, and it creates the DISPLAY environment variable to specify the secure tunnel port.
It is a much (MUCH) more secure way to use X11 than previous methods, speaking as someone that has been using X11 since the early '90s. I did it the xhosts way for years, but about 6 years ago, I switched over to ssh -X and have never looked back.
Oh yea, several of my machines are about 2,000 miles away (all inside the company network, but still a long way away).
Message was edited by: BobHarris

TSQL working in 2008 but not in SQL Server 2014

Hello,
We recently have been asked to move from SQL Server 2008 to SQL Server 2014. We are trying to run parallel tests and one of our queries that was working perfectly in 2008 is not working in 2014.
One of the filter on the our query(from 2008) is we convert a varchar field to date and compare it to anotehr calulated filed ("convert(date,Quick_Data_Start_Date) <= convert(date,(Year_ID_to_Use + '-' + Month_ID_to_Use + '-01'))").
This worked fine in 2008 but when i try to do similar operation in 2014 it returns no result.
For testing purposes, instead of converting the field to date format, i manully converted the actual value i.e. instead of using "convert(date,Quick_Data_Start_Date)" when i use "convert(date,'8/1/2014')" the code works fine.
The field "Quick_Data_Start_Date" comes from a pivot query.
When i create a temporary table for the pivot query and use the temporary table in my code and then convert the field on fly the code works fine again.
Seems like the T sql is not able to convert the field from varchar to date on the fly when coming from a different query. We have tried changing the compatbility level to 100 as well and it still would not work.
Any suggestions and comments will be really helpful. Thanks.
Regards,
GM

Hello, here is my overall review:
The query is not optimized … agreed! But that’s not the issue.
There are a number of indexes that could be created, a number of minor calculations or evaluation criteria that could be improved to make the query more efficient … again – AGREED.
The query “as is” runs in just under a minute (on SQL 2008 machine with less memory and slower hard drives). Adding the indexes would take more time to add than they would save.
NONE of that should make the query NOT WORK. These deficiencies might make it run more slowly, but should not cause the query to return no results.
“order by” shouldn’t make any difference because the query plan isn’t assuming or using any special order
The main table (~10 M rows) is using a clustered index scan (not efficient, but not the point)
The Time dimension table is using a non-clustered index seek (so the index is sorted but the data in the table is NOT physically sorted that way)
The pivot subquery is using clustered index scan (it’s only 6 rows, so who cares)
Once again, the order by might make it less efficient, but shouldn’t make it fail. We get no errors or warnings – it just returns no rows.
Because the query DOES return results when we
Either dump the Pivot query result into a #temp table(single row) and use the #temp table instead of the pivot query in the big SQL or
The “input” tables are limited to X rows but DOES NOT when the inputs have more rows
This strongly suggests a memory issue.
The server has 64 GB of RAM, but this probably isn’t enough to hold millions of rows and calculations.
Can we turn on some traces to see what’s happening to the data in the query? How and what are we looking for?
Once the memory capacity is exceeded, SQL should be pushing these results to a temporary table (either in the local database or the tempdb). Can we test to see if that is happening?
How?
Is there a permissions issue?
I have successfully done large copies outside of SQL (copied 300+ GB file from one location to another) that had to use the disk instead of just memory … means the disk write operation
isn’t restricted from my user account.
I can also confirm that the account that runs the SQL Service (“Network Service” account) has full permissions to the drives and paths where the mdf and ldf files are stored (including
master and temp).
If this doesn’t work, our upgrade is basically frozen and cannot proceed. I’m really out of ideas … anything?

[Captivate 8] HTML5 Publishing - First Slide shows locally but not on test server

Hi all,
The Question
Has anyone run into this issue of the first slide not showing on HTML5 (and/or SWF) until you open up the TOC and select the recalcitrant slide and then it shows (and operates) just fine? Not on project load, just when it is selected.
The Description
I've only been using Captivate 8 for a short period of time, and I've run face first into a little bit of a bigger hurdle than I expected. At present, I have a simple, linear Captivate project that in essence replicates a Powerpoint (client specified). Everything was working just fine until I tried a HTML 5 Preview from Captivate 8 and first slide did not show. After some research my solutions to the problems I encountered was to:
Local preview occasionally causes a glitch. Solution: Publish locally and (pre)view the result. This didn't work.
Group all objects on the first slide and then attach the action Show to that group. This fixed the problem.
Following that I published it to a host server (test server at the moment, but ultimately it will the live dev server). I encountered the same problem, so:
Tried the group trick, above. No joy.
Opened up the TOC and navigated to the other slides. None of the buttons (previous slide, next slide) worked.
Renamed the "Mouse.mp3" to remove that annoying click. Result: All project buttons worked, but the first slide was not showing (grouped or otherwise).
Removed all master slide objects from the slide. No joy.
Removed the button (action: Next Slide) and reduced the play time of the slide to 5 seconds so that the slide would play upon loading, then just move to the next slide. No joy.
Tried all of the above with SWF and HTML 5 publication.
Tried all of the above with SWF only.
Once again, when I open up the TOC and navigate to the first slide ("Title Page") the blank slide that is populated only by the lonesome borders becomes the Title slide, as it should. Also, local preview from the file (\project\index.htm) works just fine.
Obviously I'm missing something. It's probably something incredibly obvious, so I thank you for your patience.
The Technical
Captivate 8.0.0.145
OS: Maverick OSX and Windows XP Pro SP1
Other: Adobe CS (up-to-date install)

First, apologies--I didn't see the "Getting Started" sub-community so if this thread can be moved there then thank you. Second, I missed some important details.
Project Details
Captivate 8, blank project*. Content at the moment is only text captions, media resources (pictures, two web objects [to Vimeo]), and transparent buttons. The project is stripped of the play bar as it is a self-paced lesson/module.
* I don't have the lead time to make this a responsive design, though that is the ultimate goal once the one-size-fits-all version (1024x627) has been released.
Testing Hardware Details
The following are the machines and browsers I've tested the HTML5 output on.
Mac (10.9.4) -- Chrome 36.0.1985.125 (hangs; need to open the TOC and click on "Title Page"), Firefox 30 (works fine), Safari 7.0.5 (9537.77.4) (works fine)
Windows 7 Pro SP1 -- IE 11 (works straight away! *shock*), Chrome 35.0.1916.153 m (hung, but on refresh worked fine), Firefox 31.0 (throws out unsupported error [known feature] but then loads up just fine).
Chromebook -- Chrome OS 35.0.1916.155 (worked straight off).
Smartphones -- Not supported, but iPhone 4S (iOS 7.1.2) (works fine, but not designed); Galaxy S5 Chrome (broken).
Tablets -- iPad2 (iOS 7.1.2) (play button loads partial content, on refresh works fine); Galaxy Note 10.1 2014 Chrome (broken), Android Browser (works fine).
I'm more than willing to share a link to the project and the Captivate 8 file, but just thought that I would see if this gets any traction/recognition before going deeper.

Workshop App Works on Admin but Not On Managed Server

Hi all, I have a very simple test Workshop App that works fine on an Admin server
but not on a Managed Server. I have all the JMS and JDBC resources that the apps
need, the console does not complain, they deploy fine, but for some reason I get
exceptions when deployed to the Managed server but works fine on the Admin server.
What's the difference between both servers? I start one with startWebLogic.cmd
and the other one with startManageWebLogic.cmd in the same domain directory. The
only resource that I have not been able to target to the managed server is WSStoreForwardInternalJMSServercgServer
which I have no idea what it is or if it matters. Some portions of the app works
when deployed to the managed server so I know it has deployed fine and some simple
pages compile and work fine but when using certain JAR files in the lib directory
I get weird exceptions on the managed server and not on the Admin server.
I'd appreciate any help.
Thanks, Jose

Hi all, I have a very simple test Workshop App that works fine on an Admin server
but not on a Managed Server. I have all the JMS and JDBC resources that the apps
need, the console does not complain, they deploy fine, but for some reason I get
exceptions when deployed to the Managed server but works fine on the Admin server.
What's the difference between both servers? I start one with startWebLogic.cmd
and the other one with startManageWebLogic.cmd in the same domain directory. The
only resource that I have not been able to target to the managed server is WSStoreForwardInternalJMSServercgServer
which I have no idea what it is or if it matters. Some portions of the app works
when deployed to the managed server so I know it has deployed fine and some simple
pages compile and work fine but when using certain JAR files in the lib directory
I get weird exceptions on the managed server and not on the Admin server.
I'd appreciate any help.
Thanks, Jose

C# Script to copy an Excel File working locally but not on the server when I schedule a job

So I have these couple C# commands to copy an Excel File which works fine and dandy on my local client when I test and run this SSIS Package but when I tried scheduling the job on the server, it failed.
These are the couple C# commands...
// This Opens the Source .xlsx File from Emdeon ePaySmart
Workbook workbook = excelApplication.Workbooks.Open(StringSourceFile, XlUpdateLinks.xlUpdateLinksNever, true, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
// This will Save the Source .xlsx Emdeon ePaySmart File as a .xls File...note xlFileFormat.xlExcel5
workbook.SaveAs(StringDestinationFile, XlFileFormat.xlExcel8, Type.Missing, Type.Missing, Type.Missing, Type.Missing, XlSaveAsAccessMode.xlExclusive, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
Is this because I'm using xlFileFormat.xlExcel8 and locally it is running fine but when I schedule via SQL Server Management Studio as a SQL Server Agent Job it seems to be failing??
I sure hope I don't have to change this so it will run as a SQL Server Agent Job and/or run this locally every blessed week.
Can someone clear this up for me and provide a potential solution?
Thanks for your review and am hopeful for a reply.
ITBobbyP85

That is Excel automation, which requires Excel to be installed on the computer where the code runs, and is not supported on a server without an interactive user logged in.
David
David http://blogs.msdn.com/b/dbrowne/

Works perfect locally, but not on server

The page:
http://www.yale.edu/faith/rc-fwl2.htm
Haven't tested it on the Windows side, but on the Mac, this
file's accordion behaves perfectly on my Mac when testing in
Dreamweaver with both Safari and Firefox. But when I move the file
and the relevant libraries to the server, the accordion doesn't
work at all: all the sections are open and frozen in position.
It would seem as if the file on the server doesn't see the
libraries, but I don't know why it doesn't. I uploaded them in
entirety. They're in the folder 'Spry_P1_6_10-01-07', at the top
level of the root folder, just as it's located locally.
Thank you for your help.
- Gary

Thanks, Don...
I figured out that the problem occurred because of security
restrictions to file access for the Yale University server. I
corrected the problem – made the CSS and JS files accessible
– by moving them into my CSS and script folders,
respectively. No problem getting access at this directory level. I
had been worried about what would happen if these files were moved
out of the framework directory, but it all works file now.

Flash Remoting Works Locally But Not On The Server

Hello,
I have a flash file that connects to an asp.net page. The
aspx page queries a databse and returns a set of records to flash.
Flash reads in those records and processes those records. Locally,
this works fine. However, on the server, nothing happends. I spoke
with tech support at hosting company and they tell me everything is
installed for Flash Remoting.
Here is the code thats on the server:
import mx.remoting.NetServices;
import mx.remoting.NetDebug;
mx.remoting.debug.NetDebug.initialize();
//CONSTRUCTOR
var inited:Boolean = false;
if(!inited){
inited = true;
NetServices.setDefaultGatewayUrl("
http://63.134.251.243/gateway.aspx");
var gatewayConn
bject = NetServices.createGatewayConnection();
gatewayConn.setDebugID( "Gateway Connection" );
var SQLQueryToolService
bject = gatewayConn.getService("matthewlemke", this
function SQLQueryToolAction(){
SQLQueryToolService.test("SELECT * FROM flashImages");
function test_Result(result){
trace(result);
_root.abc.text = result.toString();
SQLQueryToolAction();
Here is the code locally:
import mx.remoting.NetServices;
import mx.remoting.NetDebug;
mx.remoting.debug.NetDebug.initialize();
//CONSTRUCTOR
var inited:Boolean = false;
if(!inited){
inited = true;
NetServices.setDefaultGatewayUrl("
http://localhost/matt/gateway.aspx");
var gatewayConn
bject = NetServices.createGatewayConnection();
gatewayConn.setDebugID( "Gateway Connection" );
var SQLQueryToolService
bject = gatewayConn.getService("matt", this );
function SQLQueryToolAction(){
SQLQueryToolService.test("SELECT * FROM flashImages");
function test_Result(result){
trace(result);
_root.abc.text = result.toString();
SQLQueryToolAction();
Any help is greatly appreciated.
Thanks,
Vic

I am having the exact same problem. My remoting application
works fine on my laptop as long
as the url for the gateway reads
http://localhost/remotingData/gateway.aspx,
but if I change
it to the name of my machine and attempt to run the swf I
keep getting a NetConnection.call.badversion error in the
netconnection debugger. If I attempt to connect through IE it just
sits with no reply.
Is there some kind of permission thing going on here?
Flash MX2004 Professional
Flash Remoting Components MX2004 (unlicensed)
IIS 6.0
IE 6.0

PPTP VPN works with local but not RADIUS authentication

iPhone OS v3.1
My VPN server is a Draytek 3300v. The iPhone connects OK when an account is set up locally on the server, but as soon as I switch it to use a RADIUS server (no other settings changed), authentication fails. I have tried 2 different RADIUS servers, with the same result. Immediately after successful authentication comes back from RADIUS, the VPN server log shows:
pppd: peer 'john.smith' authenticate succeed, protocol:49699
MSCHAP-v2 peer authentication succeeded for john.smith
rcvd [LCP TermReq id=0x2]
LCP terminated by peer
pptpd: EOF or bad error reading ctrl packet length
pptpd: cannot read packet header, exit
pptpd: read pptp packet failed
Clients using various versions of Windows all connect OK, but the iPhone fails authentication both over the carrier network and wireless.
Any ideas anyone?

Have you checked the Enterprise Deployment Guide for 3.1? It's at http://www.apple.com/support/iphone/enterprise

Spry Widget Slideshow Basic works on local but not on remote server

Similar Messages

Maybe you are looking for