Spyware for iPhone... Does it exist.. Is an I phone safe from hacking

Spyware for iPhone... Does it exist.. Is an I phone safe from hacking

Simple question, complicated answer. If the phone is not jailbroken there is no known spyware that can be installed remotely. However, any application can gain access to your contacts, calendar, email and location. This is either a feature if you are aware of it and want it or a risk if you don't. For example, apps like foursquare will report your current location to your "friends". But there was recently an app that would use Foursquare to report the location of any women near you (it has been withdrawn after some bad publicity). Some applications will make copies of your contact list and send to their servers. They are supposed to ask before doing so, but Apple does not enforce this rule. Why would they do this? Because knowing who your contacts are, and their interests from the Facebook sites, they can learn more about you and how to market to you. They might also reach out to your contacts to market to them directly.
With hundreds of thousands of apps available, some probably do things that they shouldn't. So be careful in the apps you choose.

Similar Messages

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • Follow-up posting flow type Credit for 870 does not exist

    Hi SAP,
    I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this:
    Diagnosis
    You have changed the data in such a way that follow-up postings have resulted.
    No follow-up posting flow type has been defined for Credit for the flow type 870. A proposed flow type for flow type 3NCH has not been defined either.
    System Response
    Processing cannot be continued without the flow type.
    Procedure
    Contact your system administrator.
    Procedure for the system administrator
    Check and correct the settings for the reference flow type for follow-up postings in Customizing as required.
    Is there any setting in configuration Txn SPRO should i do? Will give points for those who help me out this problem.
    TQ
    Regards,
    Nazrul

    Hi Nazrul,
    yes, there are reference flow types missing for follow-up postings. Follow-up postings are created if condition amounts have been changed and that affects already posted items in the cash flow. In this case follow-up postings are generated. For the follow-up postings the system uses special flow types that have to be maintained in customizing.
    SPRO - Real Estate - Conditions, Flow Types, Account Determination - Maintain Flow Types - Assign Reference Flow Types
    Relevant relationship keys are:
    2     IS-RE: Follow-up postings due to condition incr.
    32     IS-RE: Follow-up posting due to condition reduct.
    You have to assign reference flow types for these relationship keys.
    This should help.
    Regards, Franz

  • [SOLVED] database file for multilib does not exist

    Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
    Last edited by bdawg (2012-09-18 22:57:17)

    bdawg wrote:
    Ok so the whole output is as follows:
    Warning: database file for 'multilib' does not exist
    Error: failed to prepare transaction (could not find database)
    And my Pacman.conf is blank
    pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
    Are you running a 64-bit system?
    Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
    Last edited by karol (2012-09-18 22:13:59)

  • Endpoint Protection error: The source folder for content does not exist.

    I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
    I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
    I just recently started seeing that my Endpoint Deployment Package has Failed.  I click on "Content Status" and select the Endpoint package (which again shows Failed).  I click on "View Status" and I get this
    message in the "Error" tab:
    The source folder for content does not exist.
    The Asset Details point to the exact location  that does not exist:
    The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist. 
    I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
    shared and is populated with a lot of other folders. 
    Is this possibly just a bad update file?  Should I manually create that sub-folder that it says is missing?
    Any help would be great!  Thanks!

    Thanks for the quick reply, Torsten.  (I often forget which logs to check for certain things).
    There are six lines (3 errors -- in italics below) in the log around the same time frame.  They read:
    The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM  
     5920 (0x1720)
    STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    Failed to take snapshot of one or more contents in package PDC00063    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    Failed to process package PDC00063 after 33 retries, will retry 67 more times    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:47 AM    5920 (0x1720)

  • Getting 'taglib directive for "f" does not exist or TLD is not found'

    Hi,
    I'm using Eclipse 3.4 and when I open my JSF page in Eclipse, I'm getting red "x"'s next to my JSF directives. For example,
    <f:view>
    has a red "x" along the left margin and when I roll over it, it gives me the error, 'taglib directive for "f" does not exist or TLD is not found.' This is odd because I have the appropriate directives, including
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
    at the top of my page. Strangely, the "<%@" portion appears in red. Does anyone know how I can get Eclipse to recognize the listed directives?
    Thanks, - Dave

    Hi, I went to the link
    http://java.sun.com/javaee/javaserverfaces/download.html
    but following the steps only got to a place where I could download JavaServer(TM) Faces Specification Maintainance Release -- jsf-1_1-mr-spec.pdf. I did not see anywhere on here where I could download the actual jsf-api.jar or jsf-impl.jar files.
    Any further clarification you can provide is appreciated, - Dave

  • Maintenance Dialog for V_T7INDA_OFFGRP does not exist

    Hi Friends,
    I have tried to enter the values in the view V_T7INDA_OFFGRP, but I am
    getting a message, that 'Maintenance Dialog for V_T7INDA_OFFGRP does
    not exist'.
    When I went to se54 to create the Maintenance Dialog, I am not able to
    see the View V_T7INDA_OFFGRP in the funtion group HRPBSINDA_DDIC.
    Can you please help me how I can creat the Maintenance Dialog for this
    view.
    Thanks,
    Suresh Kumar Paturi

    Procedure compiles OK if I replace
    SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
    by
    pseudoRandomSeed := DBMS_UTILITY.GET_TIME;
    I still would like to understand the reason of the error as why the procedure cannot compile with SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
    Thanks

  • Idoc INVOIC error Baseline date for payment does not exist

    Dear All,
    I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
    The payment term is correctly maintained in the purchase order.
    Idoc message type INVOIC MM.
    Baseline date for payment does not exist
    Message no. M8356
    Diagnosis
    You have tried to post a document without a baseline date for payment.
    The system will not allow you to do this.
    Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
    If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
    Regards
    Arnaud

    Hello,
    Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
    In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
    I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
    Thanks anyway for your input.
    Keep in touch.
    Regards
    Arnaud

  • Jabber for iPhone & iPad too long to connect to "Phone Services"

    Hello,
    Has anybody ever experienced delay issues with Jabber for iPhone and/or iPad to connect to "Phone Services"?
    In my case, the service does connect but it can take about 1 minute. Some times it can be faster but some others it can take a while to make the service available.
    Regards,

    You've hit the nail on the head with your last sentence, though to me a month (and then another) to wait for a new line is nothing - I am on my fifth order with BT. They lost the first three, then tried charging me an arm and a leg in excess charges for the fourth. I am trying again, this time with a total package to see if they are a bit more useful when they actually know I'm not going to switch to another provider - fingers crossed.
    If they do come back with massive excess charges again though this time I've done my homework. I now know the measurements between my property and the pole as well as the BT price list they use to calculate the charges. I've also worked out a cheaper route than the one they were suggesting - Ofcom say they should offer the cheapest route and the opportunity for the customer to do some of their own work but with me they didn't do either. They also didn't consider that we don't have reliable mobile signal here. They also didn't provide me with any details of how they'd come to that figure and just demanded it. I've had lots of advice from DEFRA, the Department for Business, Innopvation and Skills, Ofcom and ex-Openreach planners and should be able to get a line under the USO. I have a horrible feeling that I've done all this homework now though and they'll just come out and do it without demanding the excess, but if they do I am at least ready this time.

  • WebPartPagesWebService.GetWebPartProperties gives The file is not available. Either the file does not exist or it cannot be edited from its current location.

    Hi,
        I am trying to get all web parts from our sharepoint site by calling web service method GetWebPartProperties of WebPartsPages service. The method works fine for the root page (Home Page) but for pages in sub site i get this in the xml
    node, Outer XML - <WebParts xmlns="http://microsoft.com/sharepoint/webpartpages"><!--The file is not available. Either the file does not exist or it cannot be edited from its current location.--></WebParts>. I am struck here.
    Please help me understand why i am getting this?
    Regards,
    Kalim

    Hi,
    We can do as follows:
    1. Mark sure the page URL is correct.
    2. Check whether current user has permission to access  the page.
    3. Use SPServices to get web part properties.
    http://spservices.codeplex.com/wikipage?title=WebPartPages
    Best Regards
    Dennis Guo
    TechNet Community Support

  • If there is no driver for iphone S4, how do I connect the phone and PC?

    If there is no driver for iphone S4, how do I connect the phone and PC?

    With the special cable that came with the phone. You must install iTunes on your PC in order to access the phone, sync it, and back it up.

  • PO/ Invoice created for supplier does not exist for particular company code

    Hi Gurus,
    We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
    As per my analysis:
    1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
    2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
    Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
    Thanks for your response.
    Best regards,
    Karun Kumar

    You can create vendor only with reference to purchase organization and withoout company code.
    for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
    So in your case, your analysis is correct.

  • Control indicators for controlling does not exist

    Hi,
    While doing g/l posting I got this error "Control indicators for controlling area----does not exist"
    Please help me with the solution.
    Regards,
    Jyoti

    your config is missing go to tcdoe OKKP, selecet your controling area and then select the tab activate components  and make sure they are active and the boxes are ticked
    Points will be appreciated
    Regards,
    Zaid Azam

  • Customizing for Employee Does Not Exist

    Whilst trying to create a Leave Request in ESS, the following warning message appears "customizing for employee 01000000 does not exist".
    Does anyone know why this is happening?
    Thanks
    MN

    Please, could you tell me how did you resolve it??
    Thank you

  • File does not exist... Unknown request from my internet network

    Mu Web server log is full of this kind of entry :
    [Wed Mar 14 22:04:31 2007] [error] [client 192.168.0.2] File does not exist: /Library/WebServer/Documents/wpad.dat
    192.168.0.2 is my PC (under Windows XP) on my local network and I tried to understand but I have no browser runing currently but I still get entry for this wpad.dat.
    My PC is trying to get this file but there is no wpad.dat on the server.
    Can someone tell me what's going on ?
    Thanks

    Check this link:
    http://www.microsoft.com/technet/isa/2004/plan/automaticdiscovery.mspx
    -Gregg

Maybe you are looking for