SQL command not properly ended

I am writting a procedure, I declare a cursor, the code like:
CREATE or replace procedure printloanbooklist(cardno in integer) as
cursor cur_loanbooklist is
select book_loans.book_id bookid,
title ,
date_due,
book_loans.branch_id branchid,
author_name
from books, book_loans, BOOK_AUTHORS
where books.book_id = book_loans.book_id and
book_authors.book_id = book_loans.book_id and
card_no = cardno
group by date_due desc;
c_rec cur_loanbooklist%rowtype;
it gave me:
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE PRINTLOANBOOKLIST:
LINE/COL ERROR
4/5 PL/SQL: SQL Statement ignored
13/23 PL/SQL: ORA-00933: SQL command not properly ended
26/27 PLS-00103: Encountered the symbol "BARCODE" when expecting one of
the following:
. ( ) , * @ % & | = - + < / > at in is mod not rem => ..
<an exponent (**)> <> or != or ~= >= <= <> and or like as
between from using ||
I can not tell the problem of cursor, please help and thanks!

You are right, Thanks. After I delete desc, it works. But the 'BORCODE' problem still there, the rest code like:
16 begin
17 if not cur_loanbooklist%isopen then
18 open cur_loanbooklist;
19 end if;
20
21 fetch cur_loanbooklist into c_rec;
22 while cur_loanbook%found loop
23 dbms_output.put_line(c_rec.branchid ||' ' ||sysdate);
24 dbms_output.put_line('Item(s) checked out to '||cardno);
25 dbms_output.put_line('TITLE: '||c_rec.title ||''/'||c_rec.author_name);
26 dbms_output.put_line('BARCODE: '||c_rec.bookid);
27 dbms_output.put_line('DUE DATE: '||c_rec.date_due);
28 fetch cur_loanbooklist into c_rec;
29 end loop;
30 close cur_loanbooklist;
31 end;
32 /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE PRINTLOANBOOKLIST:
LINE/COL ERROR
26/27 PLS-00103: Encountered the symbol "BARCODE" when expecting one of
the following:
. ( ) , * @ % & | = - + < / > at in is mod not rem => ..
<an exponent (**)> <> or != or ~= >= <= <> and or like as
between from using ||
Please help and have good thanksgiving!

Similar Messages

  • ORA-00933: SQL command not properly ended

    I am attempting to create a view in oracle 8.0.6 but get the error message ORA-00933 SQL command not properly ended, can anyone help?:
    SQL> create view AJT_SCHEDULES01 as
    2 select SCHDL_REFNO, STRAN_REFNO from SCHEDULES order by STRAN_REFNO desc;
    select SCHDL_REFNO, STRAN_REFNO from SCHEDULES order by STRAN_REFNO desc
    ERROR at line 2:
    ORA-00933: SQL command not properly ended

    ORDER BY cannot be used to create an ordered view or to insert in a certain order.
    Please refer to Section ORA-00933: SQL command not properly ended at : http://otn.oracle.com/doc/server.805/a58312/newch220.htm
    For further assistance, please post in the forum at : PL/SQL
    Hope this helps
    Regards
    Pushkala

  • CallableStatement error: SQL command not properly ended

    I am getting a strange error using CallableStatement and Oracle 7.3.4 with PL/SQL 2.3 using Classes12 JDBC driverset from Oracle. Here is the code we are using, which is almost verbatim from several Java/Oracle CallableStatement examples for Oracle 8. I am wondering what I am missing to make this work on Oracle 7 and am unable to find a reference online:
    //String query = "begin PAC.PAC_WIP_WIPHEADER_PKG.GetWipNumPartList(?,?); end;";
    String query = "{ call PAC.PAC_WIP_WIPHEADER_PKG.GETWIPNUMPARTLIST(?,?) } ";
    CallableStatement csth = Connection.prepareCall(query);
    csth.setString(1, wipNumber);
    csth.setInt(2, PacCarousel.getCarouselNumber());
    csth.execute();
    using either the Begin or the call query (Begin commented in above code snip) is returning the following error from the JDBC driver:
    java.sql.SQLException: ORA-00933: SQL command not properly ended
    This identical 'begin' query works fine in TOAD or the PL/SQL console for Oracle, but just won't work using this set of JDBC drivers.
    Has anyone run into this problem before or perhaps have some suggestions?
    Thanks in advance

    I am getting a strange error using CallableStatement and Oracle 7.3.4 with PL/SQL 2.3 using Classes12 JDBC driverset from Oracle. Here is the code we are using, which is almost verbatim from several Java/Oracle CallableStatement examples for Oracle 8. I am wondering what I am missing to make this work on Oracle 7 and am unable to find a reference online:
    //String query = "begin PAC.PAC_WIP_WIPHEADER_PKG.GetWipNumPartList(?,?); end;";
    String query = "{ call PAC.PAC_WIP_WIPHEADER_PKG.GETWIPNUMPARTLIST(?,?) } ";
    CallableStatement csth = Connection.prepareCall(query);
    csth.setString(1, wipNumber);
    csth.setInt(2, PacCarousel.getCarouselNumber());
    csth.execute();
    using either the Begin or the call query (Begin commented in above code snip) is returning the following error from the JDBC driver:
    java.sql.SQLException: ORA-00933: SQL command not properly ended
    This identical 'begin' query works fine in TOAD or the PL/SQL console for Oracle, but just won't work using this set of JDBC drivers.
    Has anyone run into this problem before or perhaps have some suggestions?
    Thanks in advance

  • Error in SQl Query - SQl Command not properly ended

    Hi All
    I have this SQL query that returns the following error when I run it in TOAD:
    SELECT
    VC.CAMPAIGN_NUMBER,VC.CAMPAIGN_TITLE,VC.CAMPAIGN_DESC,
    VCV.START_DATE, VCV.END_DATE,VC.CAMPAIGN_TYPE,VC.APPLICABILITY,
    VC.CAMPAIGN_PRIORITY
         FROM
         VM_CAMPAIGN_VIN VCV ,VM_CAMPAIGN VC
         WHERE
              VCV.VIN = 'US'
              AND
    VCV.CAMPAIGN_NUMBER = VC.CAMPAIGN_NUMBER AND VC.COUNTRY_CODE = 'E'
              AND VC.LANGUAGE_CODE = 'L' AND VC.CAMPAIGN_TYPE = null
    AND SYSDATE BETWEEN VCV.START_DATE AND VCV.END_DATE
    AND SYSDATE BETWEEN VC.START_DATE AND VC.END_DATE)
    A ORDER BY A.CAMPAIGN_PRIORITY DESC, A.END_DATE
    The error is:
    SQl Command not properly ended
    Any help is highly appreciated. Thanks

    Thanks a lot to everyone. It helped me run the query without any problem. Now I have another issue. This may not be the right place to post this question, I think.My apologies for that. The problem is, Weblogic posts an error as follows:
    java.sql.SQLException: ORA-00923: FROM keyword not found where expected
    I am wondering if this is an Java related error or an SQL related error.
    Well, I am using the SQL Statement which you helped debug, and it is inside something called "XXSQLConstants.java consisting of the following SQL statement:
    public static final String XX_ALL_CAMPS_SELECT = "SELECT * FROM" +
         "(SELECT vc.campaign_number, vc.campaign_title, vc.campaign_desc, vc.start_date," +
         "vc.end_date, vc.campaign_type, vc.applicability, vc.campaign_priority" +
    "FROM vm_campaign vc" +
    "WHERE vc.applicability = 'Y'" +
    "AND vc.country_code = ? " +
    "AND vc.language_code = ? " +
    "AND vc.campaign_type = ? "+
    "AND SYSDATE BETWEEN vc.start_date AND vc.end_date" +
    "AND NOT EXISTS (" +
    "SELECT 'X'" +
    "FROM vm_campaign_vin vcv" +
    "WHERE (vcv.vin = ? " +
    "AND vcv.campaign_number = vc.campaign_number" +
    "))" +
         "UNION" +
         "SELECT vc.campaign_number, vc.campaign_title, vc.campaign_desc," +
         "vcv.start_date, vcv.end_date, vc.campaign_type, vc.applicability," +
    "vc.campaign_priority" +
    "FROM vm_campaign_vin vcv, vm_campaign vc" +
    "WHERE vcv.vin = ? " +
    "AND vcv.campaign_number = vc.campaign_number" +
    "AND vc.country_code = ? " +
    "AND vc.language_code = ? " +
    "AND vc.campaign_type IS NULL" +
    "AND SYSDATE BETWEEN vcv.start_date AND vcv.end_date" +
    "AND SYSDATE BETWEEN vc.start_date AND vc.end_date)";
    The SQl runs fine when tested (well, it does not return any data for the rows returned, but there are no errors), but in my application server I get the following error (pointing out the same SQL code pasted above:
    java.sql.SQLException: ORA-00923: FROM keyword not found where expected
    Any suggestions? Thanks in advance. I appreciate all replies

  • SQL Error [ORA-00933: SQL command not properly ended

    I have following installed:
    7.9.6 BI Apps
    10.1.3.4 DAC
    8.6.0 Informatica
    Container JDE Enterprise 9.0
    Out of 211 tasks 69 tasks executed successfully.
    Error in workflow [SDE_JDE_PartyOrganisationDimension_Full].
    I have checked the session log file and understand that there is error with the SQL statement.
    Since it is Pre-built, the workflow should have run properly with correct SQl statement. But in this case it is not working.
    Is it because the SQL statement is too long?
    Any help will be greatly appreciated.
    Part of the log file
    RR_4035 : SQL Error [
    ORA-00933: SQL command not properly ended
    Database driver error...
    Function Name : Execute
    SQL Stmt : SELECT
    F0101.ABAN8,F0101.ABALKY,F0101.ABTAX,F0101.ABALPH,F0101.ABMCU,F0101.ABSIC,F0101.ABAT1, F0101.ABTAXC, F0101.ABATP, F0101.ABATR,F0101.ABEFTB,F0101.ABAC01,
    F0101.ABAC02, F0101.ABAC03, F0101.ABAC04, F0101.ABAC05, F0101.ABAC06, F0101.ABAC07, F0101.ABAC08, F0101.ABAC09, F0101.ABAC10, F0101.ABAC11,
    F0101.ABAC12, F0101.ABAC13, F0101.ABAC14, F0101.ABAC15, F0101.ABAC16, F0101.ABAC17, F0101.ABAC18, F0101.ABAC19, F0101.ABAC20, F0101.ABAC21, F0101.ABAC22, F0101.ABAC23,
    F0101.ABAC24, F0101.ABAC25, F0101.ABAC26, F0101.ABAC27, F0101.ABAC28, F0101.ABAC29, F0101.ABAC30,F0101.ABUSER, F0101.ABUPMJ,F0101.ABUPMT,F0101.ABTICKER, F0101.ABEXCHG, F0101.ABDUNS,
    F0101.ABNOE,F0101.ABGROWTHR,F0101.ABYEARSTAR,F0101.ABREVRNG, D.FaxPhoneArea, d.Phonearea, D.Fax AS Fax ,D.Phone As Phone,D.WPUPMJ AS WPUPMJ,R.Email AS Email,R.Internet As Internet,R.EAupmj As EAUPMJ,F0111.WWAN8,F0111.WWIDLN,
    F0111.WWSLNM,F0111.WWGNNM,F0111.WWMDNM,F0111.WWSRNM,F0111.WWUSER,F0111.WWUPMJ,F0111.WWUPMT,F0111.WWNTYP,F0111.WWNICK,F0111.WWPCM,F0116.ALAN8,
    F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4, F0116.ALADDZ, F0116.ALCTY1,F0116.ALADDS,F0116.ALCTR, F0116.ALUPMJ,F0116.ALUPMT,F03012.AIAN8, F03012.AICO,F03012.AIMCUR,F03012.AICRCD,F03012.AIACL,
    F03012.AIARPY,F03012.AIDB,F03012.AICRCA,F03012.AIASTY,F03012.AISPYE,F03012.AIOPY,F03012.AIPOPN,F03012.AIDAOJ,F03012.AIAN8R,F03012.AICPGP,F03012.AIFRTH,
    F03012.AIMAN8,F03012.AIUPMJ,F03012.AIUPMT, F03012.AICUSTS,F03012.AITERRID, F03012.AIDTEE, F0401.A6AN8, F0401.A6MCUP, F0401.A6CRRP,F0401.A6CRCA, F0401.A6AN8R,F0401.A6CPGP, F0401.A6FRTH, F0401.A6UPMJ,F0401.A6UPMT, CAST(F0101.ABAC03 AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR,
    CAST(F0101.ABAC23 AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
    CAST(F0101.ABAC05 AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
    CAST(F0101.ABAC15 AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
    CAST(F0101.ABAC09 AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
    CAST(F0101.ABAC11 AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
    CAST(F0101.ABAC19 AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
    CAST(F0101.ABAC21 AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
    CAST(F0101.ABAC27 AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
    CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,
    CAST(F0101.ABAC17 AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
    CAST(F0101.ABAC06 AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
    CAST(F0101.ABAC08 AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
    CAST(F0101.ABAC14 AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
    CAST(F0101.ABAC22 AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
    CAST(F0101.ABAC28 AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
    CAST(F0101.ABAC18 AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
    CAST(F0101.ABAC10 AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
    CAST(F0101.ABAC20 AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
    CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
    CAST(F0101.ABAC30 AS CHAR(10)) AS LINE_OF_BUSINESS,
    CAST(F0101.ABAC14 AS CHAR(10)) AS REGION,
    CAST(NULL AS CHAR(10)) AS ACCNT_AHA_NUM,
    CAST(F0101.ABAC07 AS CHAR(10)) AS ACCNT_CLASS,
    CAST(F0101.ABAC11 AS CHAR(10)) AS ACCNT_HIN_NUM,
    CAST(F0101.ABAC02 AS CHAR(10)) AS ACCNT_REGION,
    CASt(F0101.ABAC08 AS CHAR(10)) AS ACCNT_VALUE,
    CAST(F0101.ABAC16 AS CHAR(10)) AS CUST_CAT_CODE, '0' AS X_CUSTOM
    from F0101
    INNER JOIN F03012 ON F0101.ABAN8 = F03012.AIAN8
    LEFT OUTER JOIN F0401 ON F0101.ABAN8 = F0401.A6AN8
    LEFT OUTER JOIN F0116 ON F0101.ABAN8 = F0116.ALAN8 AND F0101.ABEFTB = F0116.ALEFTB
    LEFT OUTER JOIN F0111 ON F0101.ABAN8 = F0111.WWAN8 AND F0111.WWIDLN =
    LEFT OUTER JOIN (select a.WPAN8 as an8,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPAR1 end) FaxPhoneArea,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPPH1 end) Fax,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPPH1 end) Phone,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPAR1 end) Phonearea,
    max(wpupmj) as WPUPMJ
    from F0115 a,
    (select WPAN8,WPPHTP ,min(WPRCK7) MinWPRCK7 from F0115
    group by WPAN8,WPPHTP
    ) b
    where a.WPAN8=b.WPAN8 and a.wpidln =0
    group by a.WPAN8)D on f0101.aban8 = D.an8
    LEFT OUTER JOIN (SELECT P.EAAN8 as an8,
    min(case when P.EAETP= and P.EARCK7=Q.MinRCK7E then EAEMAL end) Email,
    min(case when P.EAETP= and P.EARCK7=Q.MinRCK7E then EAEMAL end) Internet,Max(eaupmj) as EAupmj
    FROM F01151 P,
    (SELECT EAAN8,EAETP,MIN(EARCK7) MinRck7E from f01151
    group by eaan8,eaemal,eaetp)Q
    where
    P.EAAN8 = Q.EAAN8 and P.EAIDLN =
    GROUP BY P.EAAN8)R on f0101.aban8 = R.an8
    union
    SELECT
    F0101.ABAN8,F0101.ABALKY,F0101.ABTAX,F0101.ABALPH,F0101.ABMCU,F0101.ABSIC,F0101.ABAT1, F0101.ABTAXC, F0101.ABATP, F0101.ABATR,F0101.ABEFTB,F0101.ABAC01,
    F0101.ABAC02, F0101.ABAC03, F0101.ABAC04, F0101.ABAC05, F0101.ABAC06, F0101.ABAC07, F0101.ABAC08, F0101.ABAC09, F0101.ABAC10, F0101.ABAC11,
    F0101.ABAC12, F0101.ABAC13, F0101.ABAC14, F0101.ABAC15, F0101.ABAC16, F0101.ABAC17, F0101.ABAC18, F0101.ABAC19, F0101.ABAC20, F0101.ABAC21, F0101.ABAC22, F0101.ABAC23,
    F0101.ABAC24, F0101.ABAC25, F0101.ABAC26, F0101.ABAC27, F0101.ABAC28, F0101.ABAC29, F0101.ABAC30,F0101.ABUSER, F0101.ABUPMJ,F0101.ABUPMT,F0101.ABTICKER, F0101.ABEXCHG, F0101.ABDUNS,
    F0101.ABNOE,F0101.ABGROWTHR,F0101.ABYEARSTAR,F0101.ABREVRNG, D.FaxPhoneArea, d.Phonearea, D.Fax AS Fax ,D.Phone As Phone,D.WPUPMJ AS WPUPMJ,R.Email AS Email,R.Internet As Internet,R.EAupmj As EAUPMJ,F0111.WWAN8,F0111.WWIDLN,
    F0111.WWSLNM,F0111.WWGNNM,F0111.WWMDNM,F0111.WWSRNM,F0111.WWUSER,F0111.WWUPMJ,F0111.WWUPMT,F0111.WWNTYP,F0111.WWNICK,F0111.WWPCM,F0116.ALAN8,
    F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4, F0116.ALADDZ, F0116.ALCTY1,F0116.ALADDS,F0116.ALCTR, F0116.ALUPMJ,F0116.ALUPMT,F03012.AIAN8, F03012.AICO,F03012.AIMCUR,F03012.AICRCD,F03012.AIACL,
    F03012.AIARPY,F03012.AIDB,F03012.AICRCA,F03012.AIASTY,F03012.AISPYE,F03012.AIOPY,F03012.AIPOPN,F03012.AIDAOJ,F03012.AIAN8R,F03012.AICPGP,F03012.AIFRTH,
    F03012.AIMAN8,F03012.AIUPMJ,F03012.AIUPMT, F03012.AICUSTS,F03012.AITERRID, F03012.AIDTEE, F0401.A6AN8, F0401.A6MCUP, F0401.A6CRRP,F0401.A6CRCA, F0401.A6AN8R,F0401.A6CPGP, F0401.A6FRTH, F0401.A6UPMJ,F0401.A6UPMT, CAST(F0101.ABAC03 AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR,
    CAST(F0101.ABAC23 AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
    CAST(F0101.ABAC05 AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
    CAST(F0101.ABAC15 AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
    CAST(F0101.ABAC09 AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
    CAST(F0101.ABAC11 AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
    CAST(F0101.ABAC19 AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
    CAST(F0101.ABAC21 AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
    CAST(F0101.ABAC27 AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
    CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,
    CAST(F0101.ABAC17 AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
    CAST(F0101.ABAC06 AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
    CAST(F0101.ABAC08 AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
    CAST(F0101.ABAC14 AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
    CAST(F0101.ABAC22 AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
    CAST(F0101.ABAC28 AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
    CAST(F0101.ABAC18 AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
    CAST(F0101.ABAC10 AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
    CAST(F0101.ABAC20 AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
    CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
    CAST(F0101.ABAC30 AS CHAR(10)) AS LINE_OF_BUSINESS,
    CAST(F0101.ABAC14 AS CHAR(10)) AS REGION,
    CAST(NULL AS CHAR(10)) AS ACCNT_AHA_NUM,
    CAST(F0101.ABAC07 AS CHAR(10)) AS ACCNT_CLASS,
    CAST(F0101.ABAC11 AS CHAR(10)) AS ACCNT_HIN_NUM,
    CAST(F0101.ABAC02 AS CHAR(10)) AS ACCNT_REGION,
    CASt(F0101.ABAC08 AS CHAR(10)) AS ACCNT_VALUE,
    CAST(F0101.ABAC16 AS CHAR(10)) AS CUST_CAT_CODE, '0' AS X_CUSTOM
    from F0101
    LEFT OUTER JOIN F03012 ON F0101.ABAN8 = F03012.AIAN8
    INNER JOIN F0401 ON F0101.ABAN8 = F0401.A6AN8
    LEFT OUTER JOIN F0116 ON F0101.ABAN8 = F0116.ALAN8 AND F0101.ABEFTB = F0116.ALEFTB
    LEFT OUTER JOIN F0111 ON F0101.ABAN8 = F0111.WWAN8 AND F0111.WWIDLN =
    LEFT OUTER JOIN (select a.WPAN8 as an8,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPAR1 end) FaxPhoneArea,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPPH1 end) Fax,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPPH1 end) Phone,
    min(case when a.WPPHTP= and a.WPRCK7=b.MinWPRCK7 then WPAR1 end) Phonearea,
    max(wpupmj) as WPUPMJ
    from F0115 a,
    (select WPAN8,WPPHTP ,min(WPRCK7) MinWPRCK7 from F0115
    group by WPAN8,WPPHTP
    ) b
    where a.WPAN8=b.WPAN8 and a.wpidln =0
    group by a.WPAN8)D on f0101.aban8 = D.an8
    LEFT OUTER JOIN (SELECT P.EAAN8 as an8,
    min(case when P.EAETP= and P.EARCK7=Q.MinRCK7E then EAEMAL end) Email,
    min(case when P.EAETP= and P.EARCK7=Q.MinRCK7E then EAEMAL end) Internet,Max(eaupmj) as EAupmj
    FROM F01151 P,
    (SELECT EAAN8,EAETP,MIN(EARCK7) MinRck7E from f01151
    group by eaan8,eaemal,eaetp)Q
    where
    P.EAAN8 = Q.EAAN8 and P.EAIDLN =
    GROUP BY P.EAAN8)R on f0101.aban8 = R.an8
    Oracle Fatal Error
    Database driver error...
    Function Name : Execute
    *****************************************************

    "ORA-00933: SQL command not properly ended"
    this error may be seen due to reasons like the Informatica properties are not set correct.
    Are all the informatica properties set correct? how many ETL jobs completed, what analytic apps are in the ETL process?

  • Sql Exception : Sql command not properly ended

    Hi,
    I have the following piece of code which i am using to search into the database and display the result in my jsp page. But it is throwing this exception. This happens only when i give 2 conditions. If i try to search with only one parameter, it works fine and returns the result. But when i enable two parameters , it throws the exception.
    Below is the code i have written.
    <%@ page language="java" contentType="text/html; charset=ISO-8859-1"
        pageEncoding="ISO-8859-1"%>
    <%@page import="java.sql.*"%>
    <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <title>Insert title here</title>
    </head>
    <body>
    <%  
            String queryString=null;
            String Part_Number=null;
                String Revision_Id=null;     
                String Part_Desc=null;     
                String Keyword_Name=null;
                String Design_Style=null;     
                String Configuration_Name=null;
                String Charateristic_Name=null;
             String pN=null;
            String rI=null;
            String pD=null;
            String kN=null;
            String dS=null;
            String coN=null;
            String chN=null;
             queryString ="select * from PART";
             Connection con=null;
               Statement pst=null;
               ResultSet rs=null;
               Part_Number =request.getParameter("part_nbr");
              Revision_Id=request.getParameter("rev_id");
               Part_Desc=request.getParameter("part_desc");
               Keyword_Name=request.getParameter("keyword_name");     
               Design_Style=request.getParameter("Design_style");
               Configuration_Name=request.getParameter("configuration");
               Charateristic_Name=request.getParameter("characteristic");
                pN=Part_Number.trim();
                rI=Revision_Id.trim();
                pD=Part_Desc.trim();
                kN=Keyword_Name.trim();
                dS=Design_Style.trim();
                coN=Configuration_Name.trim();
                chN=Charateristic_Name.trim();
              System.out.println("Part Number In success: "+pN);
              System.out.println("Rev Number In serchsuccess: "+rI);
              System.out.println("part desc In seachsuccess: "+pD);
              System.out.println("Keyword In sesuccess: "+kN);
              System.out.println("Design style In sesuccess: "+dS);
              System.out.println("Config In sesuccess: "+coN);
              System.out.println("charac In sesuccess: "+chN);
              System.out.println("queryString in sesuccess: "+queryString);
               if(rI!=null)     
                   queryString = queryString+" where REV_ID= '"+rI+"'";
               if(pD!=null)     
                   queryString = queryString+" where OBJ_DESC= '"+pD+"'";
               System.out.println("queryString in sesuccess: "+queryString);
              try
                   DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
                    System.out.println("driver manager");
                con=DriverManager.getConnection("jdbc:oracle:thin:@172.18.93.53:1521:PDMDumm", "Dumm1", "satyam");
                System.out.println("connection established");
                 pst = con.createStatement();
                rs = pst.executeQuery(queryString);
                System.out.println("Query executed");
              catch(SQLException se)
                System.out.println("database error2");
                se.printStackTrace();
              catch(Exception e)
                   System.out.println("error");
            if(rs!=null)
            %>
          <table>
              <tr>
                <th> PartNumber
                <th> Revision_Id
                <th> Description
                <th> Characteristic
                <th> Configuration
                <th> DesignStyle
                <th> Keyword
                  <th> Planned Eff In Dte
                  <th> Infos
                  <th> Native File
           </table>     
       <tr>         
        <%       
                   while(rs.next())
                      %>
            <td> <%=rs.getString(1) %>          
            <td> <%=rs.getString(2) %>          
            <td> <%=rs.getString(3) %>          
            <td> <%=rs.getString(4) %>
            <td> <%=rs.getString(5) %>
            <td> <%=rs.getString(6) %>
            <td> <%=rs.getString(7) %>     
            <td> <%=rs.getString(8) %>     
            <td> <%=rs.getString(9) %>     
            <td> <%=rs.getString(10) %>     
          <%             
            %>
    </body>
    </html>And this is the exception i get.
    Part Number In success:
    Rev Number In serchsuccess:
    part desc In seachsuccess: cat
    Keyword In sesuccess: ----
    Design style In sesuccess: ----
    Config In sesuccess: ----
    charac In sesuccess: ----
    queryString in sesuccess: select * from PART
    queryString in sesuccess: select * from PART where REV_ID= '' where OBJ_DESC= 'cat'
    driver manager
    connection established
    database error2
    java.sql.SQLException: ORA-00933: SQL command not properly ended
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
         at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java)
         at oracle.jdbc.ttc7.Oall7.receive(Oall7.java)
         at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java)
         at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java)
         at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java)
         at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java)
         at org.apache.jsp.searchsuccess_jsp._jspService(searchsuccess_jsp.java:129)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
         at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
         at SearchKdcc.doPost(SearchKdcc.java:60)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
         at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
         at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
         at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
         at java.lang.Thread.run(Thread.java:619)

    Hi drvijayy2k2 ,
    Thanks for replying.
    I used your code in my application and this is the problem i am facing now. The query is getting executed but its not taking the value from the database because of the Null Rev Id that is getting inputted into queryString. I have given only part_desc as the search criteria. If i just search using part description , commenting the rev_id part , i am able to retrieve the result from the database.
    I have to code in a way using which i can search using either rev_id or part_desc , or using both at the same time.
    Part Number In success:
    Rev Number In serchsuccess:
    part desc In seachsuccess: cat
    Keyword In sesuccess: ----
    Design style In sesuccess: ----
    Config In sesuccess: ----
    charac In sesuccess: ----
    queryString in sesuccess: select * from PART
    queryString in sesuccess: select * from PART where REV_ID= '' and OBJ_DESC= 'cat'
    driver manager
    connection established
    Query executed

  • SQL Command not properly ended at line 13

    Dear All,
    I have a below code to find a value from database. but when iam running this code it is throwing error "SQL Command not properly ended at line 13"
    iam unable to find the error.
    Pls help me.
    DECLARE
    match_count INTEGER;
    -- Type the owner/schema of the tables you are looking at
    v_owner VARCHAR2(255) :='SCOTT';
    -- Type the data type you are look at (in CAPITAL)
    -- VARCHAR2, NUMBER, etc.
    v_data_type VARCHAR2(255) :='VARCHAR2';
    -- Type the string you are looking at
    v_search_string VARCHAR2(255) :='KING';
    BEGIN
    FOR t IN (SELECT table_name, column_name FROM all_tab_cols where owner=v_owner and data_type = v_data_type)
    LOOP
    EXECUTE IMMEDIATE
    'SELECT COUNT(*) FROM '||v_owner||'.'||t.table_name||' WHERE '||t.column_name||' = :1'
    INTO match_count
    USING v_search_string;
    IF match_count > 0 THEN
    dbms_output.put_line( t.table_name ||' '||t.column_name||' '||match_count );
    END IF;
    END LOOP;
    END;
    Thanx..

    DECLARE
       match_count       INTEGER;
    -- Type the owner/schema of the tables you are looking at
       v_owner           VARCHAR2 (255) := 'SCOTT';
    -- Type the data type you are look at (in CAPITAL)
    -- VARCHAR2, NUMBER, etc.
       v_data_type       VARCHAR2 (255) := 'VARCHAR2';
    -- Type the string you are looking at
       v_search_string   VARCHAR2 (255) := 'KING';
    BEGIN
       FOR t IN (SELECT table_name, column_name
                   FROM all_tab_cols
                  WHERE owner = v_owner AND data_type = v_data_type)
       LOOP
          EXECUTE IMMEDIATE    'SELECT COUNT(*) FROM '
                            || v_owner
                            || '.'
                            || t.table_name
                            || ' WHERE '
                            || t.column_name
                            || ' = :1'
                       INTO match_count
                      USING v_search_string;
          IF match_count > 0
          THEN
             DBMS_OUTPUT.put_line (   t.table_name
                                   || ' '
                                   || t.column_name
                                   || ' '
                                   || match_count
          END IF;
       END LOOP;
    END;Checked and no issues in Toad too...

  • Sql command not properly ended at oci call oci stmtexecute

    Hi ,
    Iam new to OBI Apps, i have my DB,OBIEE 11g,Informatica, DAC instance installed in linux 64 bit and OBI Apps, Informatica, Dac clients in windows7 32 bit
    When i run DAC full load all the tasks show Success.
    In RPD when i select database in physical layer it is not showing any rows, when i try right click and select update row count
    [nqsError: 17001] Oracle Error Code: 933, message: ORA-00933: SQL Command not properly ended at OCI call OCIStmtExecute.[nqsError: 17010] SQL Statament Perparation failed.
    and als in answers iam facing same problem
    In Answers iam using EBS pre defined dashboards
    Unable to see the data in dashboards it is throwing error
    [nqsError: 17001] Oracle Error Code: 933, message: ORA-00933: SQL Command not properly ended at OCI call OCIStmtExecute.[nqsError: 17010] SQL Statament Perparation failed.
    I dont know where i had done mistake.
    can any one help in this regard \
    plzzzzzzzzzz

    Hi,
    Thanq for ur reply
    In EBS connection pool i have given at connection script-> execute on contact
    "call /* valueof(NQ_SESSION.ACF) */ APP_SESSION.validate_icx_session('valueof(NQ_SESSION.ICX_SESSION_COOKIE)')"
    can u let me know is it correct.
    And one more doubt
    in client machine i have 2 RPDs in repository
    1. OracleBIAnalyticApps.rpd and
    2. EnterpriseBusinessAnalytics.rpd
    i had uploaded OracleBIAnalytics.rpd in EM and below that i haven the path for catlog/EnterpriseBusinessAnalytics.rpd
    is it correct i have to upload EnterpriseBusinessAnalytics.rpd only

  • 'SQL command not properly ended' error

    Hi,
    I wrote a test application.
    I used an existing DB schema and the following:
    ============
    Windows XP
    KODO 3.0.2,
    Oracle 8i,
    Oracle JDBC driver - tried both 9.2.x and 9.0.1,
    JDK 1.4.2,
    KODO tools:
    schemagen.bat,
    reversemappingtool.bat,
    jdoc.bat
    custom.properties file where renamed all the ClassnameId filed to
    ClassnamePK.
    ============
    Tried to perform simple query without any parameters.
    Got the following error message:
    ================================
    kodo.util.DataStoreException: ORA-00933: SQL command not properly ended
    What have I missed here? I did not have this problem when I left only one
    table in the schema, having removed the others.
    Does anybody has any ideas regarding this issue? Do you want me to post
    any additional information?
    Thanks in advance,
    Anton

    Patrick Linskey wrote:
    Anton,
    Can you post the offensive SQL?
    -Patrick
    Anton Kommar wrote:
    Hi,
    I wrote a test application.
    I used an existing DB schema and the following:
    ============
    Windows XP
    KODO 3.0.2,
    Oracle 8i,
    Oracle JDBC driver - tried both 9.2.x and 9.0.1,
    JDK 1.4.2,
    KODO tools:
    schemagen.bat,
    reversemappingtool.bat,
    jdoc.bat
    custom.properties file where renamed all the ClassnameId filed to
    ClassnamePK.
    ============
    Tried to perform simple query without any parameters.
    Got the following error message:
    ================================
    kodo.util.DataStoreException: ORA-00933: SQL command not properly ended
    What have I missed here? I did not have this problem when I left only one
    table in the schema, having removed the others.
    Does anybody has any ideas regarding this issue? Do you want me to post
    any additional information?
    Thanks in advance,
    Anton
    Hello Patrick,
    Thank you for your reply.
    The problem I experienced magically dissappeared. I used actually
    different database servers and they probably differ in something. I am not
    able to repro it again.
    Please, forgive me for bothering you. I'll update this issue if I succeed
    to reproduce the problem again.
    Thank you,
    Anton

  • Xml query error. ORA-00933: SQL command not properly ended

    Hi all,
    My Database Version: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0.
    CREATE table test (Name varchar2(3), Id number);
    insert into test values ('abc', 61);
    insert into test values ('def', 46);
    select table_name,
    column_name,
    'abc' search_string,
    result
    from cols,xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| 'abc' || '%") > 0]')
    columns result varchar2(10) path '.'
    where table_name in ('TEST');
    and i get: ORA-00933: SQL command not properly ended it points over '*xmltable*'

    ok, its possible to get output from a xml like this.
    i need output like this,
    customerid CustomerName Country
    1 xxxx 4
    2 yyyy 5
    xml:
    <Customer>
    <CustomerInformation>
              <Customerid>1</Customerid>
              <CustomerName>xxxx</CustomerName>
              <Country>4</Country>
         </CustomerInformation>
    <CustomerInformation>
              <Customerid>2</Customerid>
              <CustomerName>yyyy</CustomerName>
              <Country>5</Country>
         </CustomerInformation>
    </Customer>
    This xml is input to my stored procedure, i need to insert the xml tag values into customner_table.
    For this i insert the xml inro a xml_document_table having a xmltype column.
    after , by using the below mentioned query to select xml_tag values from that column.
    when i execute this query
    INSERT into customer_table(customer_id)
    SELECT X.XML_DOCUMENT.extract('/Customer/commodityInfo/CustomerInformation/Customerid/text()').getStringVal() "Customerid" from XML_DOCUMENT_TABLE X;
    i got output in a single row.
    customerid_
    1 <next line> 2
    But i need output like this,
    Customerid_
    1
    2
    im struggling with this simple insert. pls share ur idea.....
    Edited by: 887268 on Apr 4, 2012 10:04 PM
    Edited by: 887268 on Apr 4, 2012 10:17 PM

  • Hi..."PL/SQL: ORA-00933: SQL command not properly ended"

    Error starting at line 1 in command:
    DECLARE
    V_ENAME EMP.ENAME%TYPE;
    V_SAL EMP.SAL%TYPE;
    V_RANK INTEGER(2);
    BEGIN
    V_RANK:=&RN;
    select ENAME,SAL,RNK from (select ENAME,SAL,dense_rank() over(order by sal desc) AS RNK from emp)
    into V_ENAME,V_SAL,V_RANK from emp where RNK=V_RANK;
    DOPL('EMPLOYEE NAME:'||V_ENAME);
    DOPL('EMPLOYEE SAL:'||V_SAL);
    DOPL('EMPLOYEE RANK:'||V_RNK);
    END;
    Error report:
    ORA-06550: line 7, column 99:
    PL/SQL: ORA-00933: SQL command not properly ended
    ORA-06550: line 7, column 1:
    PL/SQL: SQL Statement ignored
    06550. 00000 - "line %s, column %s:\n%s"
    *Cause:    Usually a PL/SQL compilation error.
    *Action:
    hi..,when i executing above pl/sql program, it shows error...!
    so i am unable to find error correctly..! plz help me..!
    Regards..!
    Cnu.

    Your SELECT syntax is messed up. The INTO should follow the SELECT. Is this what you are trying to do:
    DECLARE
      V_ENAME     EMP.ENAME%TYPE;
      V_SAL       EMP.SAL%TYPE;
      V_RANK      INTEGER (2);
    BEGIN
      V_RANK := &RN;
      select ENAME,
             SAL,
             RNK
        into V_ENAME,
             V_SAL,
             V_RANK
        from (select ENAME,
                     SAL,
                     dense_rank () over (order by sal desc) AS RNK
                from emp),
             emp
       where RNK = V_RANK;
      DOPL ('EMPLOYEE NAME:' || V_ENAME);
      DOPL ('EMPLOYEE SAL:' || V_SAL);
      DOPL ('EMPLOYEE RANK:' || V_RNK);
    END;By the way, looking at some of your past entries it looks like you have a bad habit of opening a request then never responding to it. You really should mark a entry as closed once it is no longer an issue. Also, if you mark helpful hints and helpful and correct hints as correct it makes people that help you happy and they are more likely going to help you again in the future... just saying.

  • Drop triggers in code causes SQL command not properly ended.

    running the following command in SQL developer giving the following error
    ORA-00933: SQL command not properly ended.
    What am I doing wrong
    Begin 
    For I In (Select Trigger_Name, Owner From Dba_Triggers Where Trigger_Name Like 'ABC%' And Owner = 'my_schema')
      Loop 
        Execute Immediate 'DROP TRIGGER '||I.Owner||'.'||I.Trigger_Name; 
      End Loop; 
    End;Edited by: Mo2 on Apr 16, 2010 12:21 PM
    Edited by: Mo2 on Apr 16, 2010 12:24 PM

    Mo2 wrote:
    yes it has.
    an example of the names is BIN$+i6ls2WnR/Svz0wA5LSG8A==$0
    As a matter of fact those triggers get created by the database after I drop the tables. is there a way to avoid creating them?
    drop trigger BIN$+i6ls2WnR/Svz0wA5LSG8A==$0;
    drop trigger BIN$+i6ls2WnR/Svz0wA5LSG8A==$0
    ERROR at line 1:
    ORA-00933: SQL command not properly endedYes oracle complains about this while dropping it.
    These objects get created if you have recyclebin on.
    You can either off your recyclebin or you can purge these objects from recyclebin after dropping it. Make sure that you would not require this feature or objects in future.
    Regards
    Anurag

  • Java.sql.SQLSyntaxErrorException: ORA-00933: SQL command not properly ended

    Jdeveloper 11.1.1.6
    WLS 10.3.5
    The screen in our application polls at a fixed interval, The screen renders properly and the poll too works good. but intermittently we get the error below. and there will be no data in the screen. and if reload the screen it works good.
    This doesn't happen in dev and is happening in clustered env only.Please suggest.
    java.sql.SQLSyntaxErrorException: ORA-00933: SQL command not properly ended
    Thanks

    Habe you tested your application with application module polling turned off? 
    Errors like this are most often the result of activation/passivation problems in the application.  Check out http://tompeez.wordpress.com/2011/07/08/jdev-always-test-your-app-with-applicationmodule-pooling-turned-off/ for more info.
    Timo

  • ORA-00933: SQL command not properly ended: error in TRIGGER

    Hi ,
    I tried the following example trigger but unable to trace the error..
    Could you please find it...
    CREATE OR REPLACE TRIGGER trig1
    AFTER INSERT OR UPDATE OR DELETE
    OF RLID,RL
    ON X_RLM_T
    REFERENCING NEW AS NEW OLD AS OLD
    FOR EACH ROW
    DECLARE
    rlmId X_RLM_T.RLID%TYPE:=CASE WHEN INSERTING OR UPDATING THEN :NEW.RLID WHEN DELETING THEN :OLD.RLID ELSE NULL END;
    rlm RX_RLM_T.RL%TYPE:=CASE WHEN INSERTING OR UPDATING THEN :NEW.RL WHEN DELETING THEN :OLD.RL ELSE NULL END;
    var number:=0;
    var1 number:=0;
    BEGIN
    var:=1;
    var1:=1;
    INSERT ALL
    WHEN var=1 then
    INTO LM_D(CL_ID,D_RLM,RM_NM,RDK_ORG)
    VALUES(dclid,D_RLM,RM_NM,RDK_ORG)
    WHEN var1=1 then
    INTO LM_D(CL_ID,D_RLM,RM_NM,RDK_ORG)
    VALUES(pclid,D_RLM,RM_NM,RDK_ORG)
    SELECT X_RLM_DK_MAP_T.CL_ID AS dclid,
        PM_OR_T_VP.ORG_TECH_ID AS pclid,
        rlmId as D_RLM,
        rlm as RM_NM,
        RX_RLM_DK_MAP_T.ORG_TECH_ID as RDK_ORG
    FROM  RX_RLM_DK_MAP_T , PM_OR_T PMN_ORG_T_VP, PM_OR_T PMN_ORG_T_HP
           PM_RA_MST
    WHERE rlmId = RX_RLM_DK_MAP_T.RL_ID and
    RX_RLM_DK_MAP_T.ORG_TECH_ID=PM_OR_T_HP.ORG_TECH_ID and
    PM_OR_T_HP.ORG_ID=PM_RA_MST.HPMN_ID and     
    PM_RA_MST.VPMN_ID=PM_OR_T_VP.ORG_ID;
    end;error:
    11/2 PL/SQL: SQL Statement ignored
    24/8 PL/SQL: ORA-00933: SQL command not properly ended
    please help me in this...

    i GOT THE ERROR...

  • Nested query in FROM clause causes 'SQL Command not properly ended' error

    SELECT sj.job_id AS job_id, 'STATUS_AWAITING_PREPARATION' AS job_status, sjr.email_sys_attach_filename AS attach_filename, sje.emailaddr as emailaddr_lastsentto
                        FROM arsnd_jobs sj, (SELECT emailaddr from ARSND_JOB_EMAILS where job_id=sj.job_id AND ROW_NUM=1) as SJE, ARSND_JOB_QUEUE sjq,ARSND_JOB_RECIPIENTS sjr
                        WHERE sj.job_id=sjq.job_id and sj.job_id=sjr.job_id
                        AND sjq.PROCESSING_STATE=0
                        ORDER BY sj.created
    I don't see anything wrong with the above query, it fails with 'SQL Command not properly ended'.
    If I remove the usage of the nested query in the FROM clause, then it doesn't give that error. Please advice what I'm doing wrong.

    Pls try
    SELECT sj.job_id AS job_id, 'STATUS_AWAITING_PREPARATION' AS job_status, sjr.email_sys_attach_filename AS attach_filename, sje.emailaddr as emailaddr_lastsentto
    FROM arsnd_jobs sj, (SELECT emailaddr from ARSND_JOB_EMAILS where job_id=sj.job_id AND ROW_NUM=1) SJE, ARSND_JOB_QUEUE sjq,ARSND_JOB_RECIPIENTS sjr
    WHERE sj.job_id=sjq.job_id and sj.job_id=sjr.job_id
    AND sjq.PROCESSING_STATE=0
    ORDER BY sj.created
    I have removed the 'as' clause you used for alias of the subquery. It should work fine now.....

Maybe you are looking for

  • How to format a pc external drive with a mac

    Hello everyone! It's about a week I've bought a new imac. I used to have a pc. I have an WD external drive which was not compatible with macs, I am trying to format it using the disk utility and choosing Mac OS extended (journaled). When I am trying

  • How do you add Google+1 to a BC website?

    Tried putting the script into the template but it does not render.  Probably an easy fix but I'm not seeing it. Thanks

  • Publish to SWF?

    Can DVD Studio Pro publish to SWF like Adobe Encore? The idea of putting mini versions of DVD projects on a web page is quite appealing.

  • Four Days With Leopard

    Monday afternoon I did a clean install on my Powerbook G4. (sorry, when Tiger came out I did an Upgrade/Archive install and two days later cleaned house and did a clean install because of all the problems. This is a very vanilla laptop! I have found

  • Combobox and checkbox in jexcelapi

    Hay Gays, with Writing Spreadsheets i want to cells which contain combobox and other cells which contain checkbox ,i need help with that i tried alot of things ?