SQL Developer and GeoRaptor problem

Hi All,
I have installed sql developer version 1.5.0.52, And in one schema i have spatial data, but as geo raptor in not installed in sql developer so i am unable to see the Spatial data.
So in order to see the spatial data i installed Geo Raptor as below:
Click menu item "Help" and "Check for update"
2. Dialog "Check for Updates - Welcome"
Click on button "Next".
3. Dialog "Check for Updates - Step 1 of 3: Source"
Add new Update center. Click on button "Add" and insert values:
Name: GeoRaptor
Location: http://georaptor.sourceforge.net/install.xml
And sql developer update sucessfully , but after installation of Geo Raptor as well i am unable to find the Geo Raptor tool in SQL Developer.
Could any one please help me that why Geo Raptor tool is not dispaying in SQL Developer.
Thanks in Advance
Vipin

Vipin,
I am one of the developers for GeoRaptor.
I note that you are using version 1.5.0.52 of SQL Developer.
The current version of SQL Developer works with version 2.1 and above.
Download the latest version of SQL Developer (I run version 2.1.1.64) and reinstall GeoRaptor.
If the install is correct you should see a GeoRaptor menu entry under the View menu pillar. Also, you
should see GeoRaptor commands against the right mouse click menus on tables/sdo_geometry columns.
Let me know if you still have problems.
regards
Simon

Similar Messages

SQL Developer and Blocking View of Other Users' Objects

I am using SQL Developer in a classroom environment. My student users can “see” Other Users objects. They cannot modify, but none the less can see the structure and data.
I only want the users to be able to see their own objects. Is there a privilege that needs to be revoked? (In using SQL Plus command line, this was not a problem.)
Thanks.
-Karen

Karen,
From sysdba account (sys/system). Run following and verify for that particular user grant is revoked. May be exit from sql developer and log back in or refresh view.
YOu can also potenially revoke all the privs from all non admin uses i.e.r even connect/resource roles and grant them back.
revoke select any table from yourschemaname;
revoke connect from schemaname;
revoke create session from schemaname;
revoke resource from schemaname;
Then just grant privs as need basis
grant connect to schemanme;
grant resource to schemaname;
grant create session to schemaname;
..Regards
Edited by: OrionNet on Jan 23, 2009 2:01 PM

Install Oracle XE, SQL Developer, and Toad on the same machine?

I have been trying to install Oracle SQL Developer, Toad, and Oracle Express on my work computer. Installing SQL Developer and Toad was pretty straightforward, and I was able to browse the XE database with SQL Developer. But after installing Toad, problems started. Toad was using Oracle XE's registry settings to locate ORACLE_HOME and oci.dll. So I tried changing the settings for Oracle XE in the registry. Toad now works, but not Oracle XE. And while I was going through this all, I even had a time when I had Toad and oracle xe working, but not SQL Developer. It almost looks like you can choose two of the products, but not all three.
So, my question to the community at large is "Can it be done?". In what directories do you have each product installed? What environment variables do you have set? Where is your tnsnames.ora? What Oracle registry settings do you have set (namely HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE)?
I can post my current settings, but I've been through so many iterations that these current settings don't really matter that much.
Here are the details I am looking for
Path to sqldeveloper.exe
Path to oracle.exe (for Oracle XE)
Environment Variables
ORACLE_HOME
ORACLE_BASE
TNS_ADMIN
PATH (just the oracle stuff)
Registry Settings
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_HOME
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_BASE
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\TNS_ADMIN
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\OLEDB
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORAMTS_CP_TRACE_DIR

I don't use toad, but there should be no reason why you can't install all 3. SQL Developer is a very clean install and affects nothing else. It doesn't add to the path, or create any registry entries except for file associations.
A toad installation should pick up your oracle client (in this case the XE code). I am curious as to why you felt you had to change registry settings. What problem were you trying to fix?
My recommendation would be to uninstall everything, clean the registry and reinstall in the order XE, Toad, SQL Developer. Test in between installations and seek help for problems as you find them. Bear in mind that this is the forum for SQL Developer. QUestions about Oracle XE would be better answered in the dedicated forum, or in the Installation forum, and questions about Toad in a toad forum.

Sql Developer and Data Guard enabled instance

I have version 1.1.2.25 SQL Developer and when I try to connect to Oracle 10gR2 instance which is data guard enabled and its logical standby it spits few message, and then connects, but data is not visible from any table.
Is there any way to see data and other code while in logical standby instance which only in read only mode?
Thanks.

This problem came when I tried to connect to Oracle
instance which is a logical standby in data guard
setup. Eventually connection is made and then you can
not see any object.
In logical standby database its suppose to be read
only and should be available for query.
In TOAD you can see every thing and when you want to
make any change ,it spits an error and wouldn't allow
you to make any change.
My question was, why SQL Developer is not showing the
objects in the list and its contains.Perhaps we could help you if you told us what the error was.

View jobs with SQL Developer and export to file with delimiter

Hi,
is there a way to view, create and alter my database jobs with SQL developer?
And is it possible to export tables, views or simple queries to file delimited different from the CSV standard?
Diego.

Hi and Welcome to the Forum!!
To select data from a table or a view you must use the SELECT sql command. Example to get the data from your view you can
select ZMATNUM,ZMATCUR,ZMATATTR from ZMATERIALAs you have said you are using SQL Developer just execute the above query in your sql developer and it will show the data. Right click the grid and export the data to excel file.

Links for SQL Developer and Data Modeler not working?

Hi folks,
I tried to access the new SQL Developer and Data Modeler links posted in the April 1 message (and on the Oracle site) from a couple of machines with no luck (empty zip files) - is there an update to the links?
Thanks!
Tomo

In Firefox zero length zip. In IE loses connection to downloads.oracle.com.

SQL Developer 2.1: Problem exporting and importing unit tests

Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.

Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team

SQL Developer and Oracle Database 10g Express Edition, Connection Problem

I am using SQL Developer version 1.2.1 and am connecting to a 10g database on a windows xp.
Up until today there have been no problems with the connection. When I tried to connect to the database and have not been able to.
The error states that "...listener refused the connection with the following error: ORA-12505, TNS; listener does not currently know of SID given in connect descriptor..."
Also tried to log into the database home page but page doesn't load...

I'd bet the database is down.
Try a login through sqlplus ("Run SQL Command Line" in the Oracle Express Edition 'Start' menu).
Do a CONN / AS SYSDBA
If you get a message about database or memory area not available, try STARTUP.
If that doesn't work, you are best off in the General Database forum or the Express Edition forum.
You'll probably get the most expert response in General Database, but the Express Edition forum can be gentler on newbies (as it is more accepted that questioners are not and do not have access to full-time DBAs).

SQL Developer and Java GUI problems

I am having a problem with all the java apps i use, including Oracle SQL Developer. When i load up SQL developer, the top of the "Connections" text is chopped off as well as all the table names in the list when I make a connection. Also the java buttons are rather large. Almost as if they have a carriage return in the text of the button.
Its seems the gui configuration for java has been corrupted, but i cannot find where to modify those settings. I cant find anything on the internet on this. I have checked my video card settings and modified them to see if that is the issue, but it doesnt fix the problem.
Since other java apps do the same thing, I know its a java issue, but Ive uninstalled all the JRE's and JDKs i have and reinstalled them, and I still have the problem.
Im on an Windows XP box and running the JDK and JRE 1.5.0_09 versions. Any help would be appreciated. its very annoying to not be able to read some of the text in the java apps including sql developer due to the tops being cut off.
I have an ATI RADEON 7000 on an DELL optiplex gx620.
any help would be appreciated

The first thing to try, if you haven't already, is to update your video driver.

Problems with sql developer and win 8 64 bit

Hi there,
It's my first time in this forum, I am a student programmer and I have many problems to install SQL Developer on Oracle Database 12c. I actually managed to install both, but I could not make them work. My question is SQL Developer works on the Windows 8 platform 64-bit?
I'm going crazy, help me please .... Thanks for a while!!!

SqlDeveloper should have no problem working in Win 8, but i do not think it's a supported platform yet.
The Database could be a little more troublesome, if you only need a working database environment to make experiments you could find the "pre-built" Virtual Machines useful.
For Win 8 and 12c try using the EA release of SQLDeveloper 4, because if I'm not mistaken the current 3.2.2 could have some problems with 12c.

Engineer to Logical Model in SQL Developer EA4 causes problems

I'm working with SQL Developer 3.0 EA4 (Build MAIN-03.97)
Unfortunately I fond out, that it would be impossible to use the function " Engineer to Logical Model" any more after I change the relational model. In datamodeler.log I got the error message line "[AWT-EventQueue-0] ERROR MDBAction - java.lang.NullPointerException" for each time I use the function "Engineer to Logical Model". I try it out with the sample model "sh_cre_all.sql" and with following steps:
1) Import via DDL File – no problem
2) Engineer to Logical Model – no problem
3) Change some attributes in the relational model – no problem
4) Again Engineer to Logical Model – no problem
5) Save, Exit an Open the sample – no problem
6) Again Step 3 and 4 – no problem
7) Add a table via drag&drop from an oracle schema – no problem
8) Save, Exit an Open the sample – no problem
9) Engineer to Logical Model no longer possible!!!
Bernd

I have experienced similar problems with 'Engineer to Logical model'.
The scenario was following:
Creating Logical model using 'Engineer to Logical model' from existing Relational model.
Modifying the Relational model and 'Engineer to Logical model' again. No exception occured but the Logical model wasn't updated accordingly.
Removing all entities from the Logical model.
Trying to 'Engineer to Logical model' again. No entities were created in the Logical model (even after few tries).
So I got to situation where I was unable to generate a Logical model, which was quite frustrating.
The workaround was to create new Data Modeller project and import to it from the original project - the 'Engineer to Logical model' worked again.

SQL Developer Extension, GeoRaptor Release 2.1.1 (Build 3) now available

Cross Post.
See details at: GeoRaptor Release 2.1.1 (Build 3) Available for SQL Developer
regards
Simon Greener

Hi,
The original GeoRaptor had some documentation but it has not been updated.
It is a task on the development list but it has a low priority next to the developments we have planned for the next release. (The main ones being the ability to map the whole, or part, of a SELECT statement executed in a SQL Worksheet - including export to shapefile; the addition of multiple SRID-aware Views to enhance the current single, SRID-unaware view; length/area tools; line and polygon selection tools.)
The attribute and geometry tabs in the pane in the lower half of the spatial view will appear when an "identify" operation is executed and selected data exists.
The split into attribute and geometry tabs was done to better control the visualisation experience of a user. The original Geometry tab displayed a single geometry in a non-standard way and allowed a user to drag select ordinates which could then be mapped. The button should have been removed in build 3 but it wasn't. It will probably do nothing. Perhaps in the next release we might replace the button with an ability to select and individual geometry, highlight it and show its points or even show elements in a multi-element geometry eg show me inner ring 2 in the first outer-ring of a multi-polygon. Don't know. If anyone wants this type of functionality register an enhancement request on the sourceforge GeoRaptor website.
Remember, GeoRaptor is an open source, community driven tool. If you want to help by writing documentation eg a simple one page wiki page on how to validate geometry etc (it doesn't have to be a whole manual), or contribute code, let us know. Or if you simply like the tool or want an enhancement, let us know.
It is hard writing a tool in the vacuum of one's own experience (no matter how considerable that might be) in a land far, far away (I live in Hobart, Tasmania, Australia), to let us know how we are going......
regards
Simon

Integration of SQL Developer and Data Modelling - concerns.

In aanother thread about OSDM connections, I commented that the development team for OSDM and the core product seem to separate and Sue responded.
Sue Harper wrote:
A clarification of the Data Modeling feedback application and this forum. The developers are part of the SQL Developer development team, but as for all our features, each developer has a focus area, so the Data Modeling developers will tend to answer those questions. The reason I said that they seem to be separate as that ODSM seems to be put together completely differently. I hit another example today. I downloaded a fresh copy of osdm without JDK. On starting it up, it complained it couldn't find a jre and quit. There was no prompt to specify the location as there is with SQLDevloper and there are no configuration files to edit.
SQLDeveloper already has issues with different components doing the same differently. The number of problems has been reduced but it has taken some time and I am concerned that the introduction of a large body of new code will cause things to revert to the bad old days in terms of quality.
I may or may not end up using OSDM, but I want to have the choice. I don't want components I don't use becoming part of the application and adding bloat. The migration components are a case in point. The "migration workbench" ought to be a completely separate add-in rather than a core component and I hope this is down with OSDM.

Jim,
"I don't want components I don't use becoming part of the application and adding bloat." Absolutely. and we agree. SQL Developer Data Modeling will be a separate standalone product so that users who don't want to use SQL Developer, but who do want to model will have that option. The nice thing about an integrated solution is that if you are doing database work and then want to do some modeling, you are in one tool. Our current plans are to release the standalone product in the initial production release and then follow that with the extension to SQL Developer depending on the customer demand. We do plan to release a read only viewer as part of SQL Developer 2.0. This will be an extension, which like the Migration extension, you can switch off. and from your note, you'd prefer the reverse, that these new extensions are pieces you choose to include and not choose to exclude.
I'm not certain we'll get agreement on this, but I'll be interested. Just this morning I was updating a thread were the request was for all the pieces to be there working out of the box.
Sue

SQL Developer and External Procedures not in tree.

Does sql Dveloper add external procedures to the object browser tree? I have SQL Developer 1.5 and if you have external procedures/functions before your regular PLSQL objects they will not display in the tree. I can make the tree work but the tree still doesn't capture the externals. Am I doing something wrong or should this be a feature request?
VSAMPLE1 shows the problem.
VSAMPLE2 is a try to resolve...
/* the problem.. */
CREATE OR REPLACE package VSAMPLE_1 IS
     PROCEDURE foobar(feedname IN VARCHAR2);
END VSAMPLE_1;
CREATE OR REPLACE PACKAGE BODY VSAMPLE_1
IS
     * Function Name:- canread
     * Description :-This function checks the file will give any error or not while reading
     FUNCTION canread (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.canRead (java.lang.String) return int';
     * Function Name:- is_exist
     * Description :-This function checks the existance of the filein the required folder
     FUNCTION is_exist (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.exists (java.lang.String) return int';
     * Function Name:- isDirectory
     * Description :-This function checks the name provided by the user is a directory or not
     FUNCTION isDirectory (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.isDirectory (java.lang.String) return int';
     * Function Name:- isFile
     * Description :-This function checks the name provided by the user is a file or not
     FUNCTION isFile (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.isFile (java.lang.String) return int';
     * Function Name:- isExist
     * Description :-This function checks the existance of file,correctness of the directory provided by the user.
     * @Param file_name :- File Name in directory
     * @return retcode :- Error checking while uploading the feed.
     FUNCTION isExist(file_name IN VARCHAR2,
                is_dir       BOOLEAN)
          RETURN PLS_INTEGER
     IS
          retcode PLS_INTEGER := -1;
          v_errcode PLS_INTEGER;
          v_errtext      VARCHAR2(1000);
          l_section_name VARCHAR2(32) := 'isExist ' ;
     BEGIN
          IF VTMLOG.isDebugEnabled THEN
               VTMLOG.debug(l_section_name,$$PLSQL_LINE, 'Checking existense of '||file_name);
          END IF;
          retcode   := is_exist(file_name);
          IF retcode = 1 THEN
               IF is_dir THEN
                    retcode := isDirectory(file_name);
               ELSE
                    retcode := isFile(file_name);
               END IF;
               IF retcode          = 1 THEN
                    retcode    := canread(file_name);
                    IF retcode != 1 THEN
                         VTMLOG.error(l_section_name,$$PLSQL_LINE, ' Can not read ' || file_name);
                    END IF;
               ELSE
                    VTMLOG.error(l_section_name,$$PLSQL_LINE, ' Unable to check if ' || file_name || ' is directory or file ');
               END IF;
          ELSE
               VTMLOG.error(l_section_name,$$PLSQL_LINE, file_name || ' does not exist ');
          END IF;
          VTMLOG.debug(l_section_name,$$PLSQL_LINE, 'Leaving ' );
          RETURN retcode;
     EXCEPTION
     WHEN OTHERS THEN
          VTMLOG.SHOW_ERROR_MESSAGE(l_section_name,$$PLSQL_LINE);
          RAISE;
     END isExist;
     PROCEDURE foobar(feedname VARCHAR2)
     IS
                retval PLS_INTEGER;
        BEGIN
          /* implementation omitted */
          retval := isExist('feed.txt',false);
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END foobar;
END VSAMPLE_1;
/* This version at least shows the tree. But I can't reach the external by clicking in the navigation tree just the placeholders */
     PROCEDURE foobar(feedname IN VARCHAR2);
END VSAMPLE_2;
CREATE OR REPLACE PACKAGE BODY VSAMPLE_2
IS
        FUNCTION canread (FILE IN VARCHAR2) RETURN NUMBER;
        FUNCTION is_exist (FILE IN VARCHAR2) RETURN NUMBER;
        FUNCTION isDirectory (FILE IN VARCHAR2) RETURN NUMBER;
        FUNCTION isFile (FILE IN VARCHAR2) RETURN NUMBER;
     * Function Name:- isExist
     * Description :-This function checks the existance of file,correctness of the directory provided by the user.
     * @Param file_name :- File Name in directory
     * @return retcode :- Error checking while uploading the feed.
     FUNCTION isExist(file_name IN VARCHAR2,
                is_dir       BOOLEAN)
          RETURN PLS_INTEGER
     IS
          retcode PLS_INTEGER := -1;
          v_errcode PLS_INTEGER;
          v_errtext      VARCHAR2(1000);
          l_section_name VARCHAR2(32) := 'isExist ' ;
     BEGIN
          IF VTMLOG.isDebugEnabled THEN
               VTMLOG.debug(l_section_name,$$PLSQL_LINE, 'Checking existense of '||file_name);
          END IF;
          retcode   := is_exist(file_name);
          IF retcode = 1 THEN
               IF is_dir THEN
                    retcode := isDirectory(file_name);
               ELSE
                    retcode := isFile(file_name);
               END IF;
               IF retcode          = 1 THEN
                    retcode    := canread(file_name);
                    IF retcode != 1 THEN
                         VTMLOG.error(l_section_name,$$PLSQL_LINE, ' Can not read ' || file_name);
                    END IF;
               ELSE
                    VTMLOG.error(l_section_name,$$PLSQL_LINE, ' Unable to check if ' || file_name || ' is directory or file ');
               END IF;
          ELSE
               VTMLOG.error(l_section_name,$$PLSQL_LINE, file_name || ' does not exist ');
          END IF;
          VTMLOG.debug(l_section_name,$$PLSQL_LINE, 'Leaving ' );
          RETURN retcode;
     EXCEPTION
     WHEN OTHERS THEN
          VTMLOG.SHOW_ERROR_MESSAGE(l_section_name,$$PLSQL_LINE);
          RAISE;
     END isExist;
     PROCEDURE foobar(feedname VARCHAR2)
     IS
                retval PLS_INTEGER;
        BEGIN
          /* implementation omitted */
          retval := isExist('feed.txt',false);
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END foobar;
     * Function Name:- canread
     * Description :-This function checks the file will give any error or not while reading
     FUNCTION canread (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.canRead (java.lang.String) return int';
     * Function Name:- is_exist
     * Description :-This function checks the existance of the filein the required folder
     FUNCTION is_exist (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.exists (java.lang.String) return int';
     * Function Name:- isDirectory
     * Description :-This function checks the name provided by the user is a directory or not
     FUNCTION isDirectory (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.isDirectory (java.lang.String) return int';
     * Function Name:- isFile
     * Description :-This function checks the name provided by the user is a file or not
     FUNCTION isFile (FILE IN VARCHAR2)
          RETURN NUMBER AS LANGUAGE JAVA NAME 'com.myCompany.myApp.bulk.FileUtil.isFile (java.lang.String) return int';
END VSAMPLE_2;
/

Hi,
I am afraid that according to the error message, it seems that this issue is mainly related to third-party, since issues using oracle database are not supported here, you could consider posting this issue in its website to get supports.
In addition, you could mark any reply as answer if it is helpful.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Developer Import Excel problem

I just recently installed SQL Developer (1.1.3).
I created a table with 4-columns all char datatype.
I tried to import an excel file into this table. Checked Header Row )1st excel record is header) and move all Available columns into Selectedcolumns. All my excel records are shown on the data preview. But when I click on [Insert], it gave me a message: No columns selected for insert.
When I viewed the DML: insert into TBLCLOSETIMETABLE (Choose Data Type,Choose Data Type,Choose Data Type,Choose Data Type) VALUES('January','Thursday, February 01, 2007','Payroll','1st Wk');
Any help will be greatly appreciated.

I was able to "successfully" import excel files. I did not know I had to edit/map on the Data Types tab.
Now I have a different problem where I have my date in excel as 01-Feb-07 and the
Data Preview pane shows 39,114.
I was not able to successfully import this column.
Again, any help will be greatly appreciated.

SQL Developer and GeoRaptor problem

Similar Messages

Maybe you are looking for