Sql query to get Thursday (Date) for the year 2014

Hello All,
I want to get the date for all the Thursdays in the year 2014. How can I achieve this using SQL query? Can anybody give me a hand with this? Thanks.
Amol

Hi,
Check if this can help you
DECLARE @counter INT
DECLARE @Date Date
SELECT @counter = 0
Select @Date = '20131226'
WHILE @counter <= 52
BEGIN
select Thursday = convert(varchar(10),DATEADD(WEEK,1, @Date),120)
SELECT @counter = @counter + 1
Select @Date = DATEADD(WEEK,1, @Date)
END
Regards
Prasad Tandel
Please dont forget to mark as answer if this helps you :)

Similar Messages

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to find compensation data for the year

Dear All,
Scenario:
A company wants to know the comepnsation data for financial year 2009-2010.
Problem: I couldnot find a single report which can provide the compensation of an employee for the year.
We are trying to build a report however needs input if anyone has done that:
Table which stores this data is PS_COMPENSATION.
Problem is : it stores data in effective date.
How to then convert it into a year -April 2010 to March 2011
For example: cases
a. existing employee: whose effective comp data will be less than April 2010
- Plus, there are pay rate changes between April 2010 to march 2011. (Pay rate change can happen on any date of the month)
- How can I add them to find the Compensation as per comp page from 1st April to 31st march 2011

I'm afraid what you're looking for is not likely to be a trivial task. If you have all of the modules required for the "Report Total Compensation" product, then you should take a look at the associated PeopleBook. I think you will have to be on HRMS 9.0 at a minimum, and using Payroll for North America and Benefits Administration.
To create a custom solution, you may have to consider a variety of other factors such job status--leave, terminated, terminated with pay, etc.--hourly vs. salaried, part time vs. full time, multi-job, variable compensation. It will depend entirely on the specific features that are being used at your site.
If you provide a very detailed example of the output you are looking for with sample data, someone might be willing to offer a solution.
Regards,
Bob

Need a sql query to get multiple dates in rows

Hi All,
i need a query to get dates for last 7 days and each dates should be in one row...
but select sysdate from dual..gives one row...
Expexcted Output
Dates:
01-oct-2013
30-sep-2013
29-sep-2013
28-sep-2013
27-sep-2013
26-sep-2013

Hi,
Do you mean that you want all 7 dates together on 1 row?
Here's one way:
SELECT LISTAGG ( TO_CHAR ( SYSDATE + 1 - LEVEL
                          , 'DD-Mon-YYYY'
                ) WITHIN GROUP (ORDER BY LEVEL)    AS txt
FROM    dual
CONNECT BY LEVEL <= 7
This is an example of String Aggregation, that is, taking a column on multiple rows, and concatenating all the values (however many htere happen to be) into 1 big string column 1 row.
Like everything else, exactly how to do it depends on your Oracle version.
For more on String Aggregation, including differetn techniques for different versions, see http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php
Message was edited by: FrankKulash
Sorry, I mis-read the question.

Reg: sql query that prints all sundays in the year

Hi all,
Please give me sql query that prints all sundays in year. And when ever we execute that query then that will prints the sysdate(that is execution date).
Thanks in Advance,
-prasad.
Edited by: prasad_orcl on Jun 5, 2009 9:13 PM

Hi,
Plz try this and let me know this works or not...
SELECT DATE DATES,TO_CHAR(DATE,'DAY') DAYS FROM FISCAL_CALENDAR
WHERE DATE_YEAR = 2009 AND
DATE BETWEEN TRUNC(SYSDATE,'YEAR') AND
ADD_MONTHS(TRUNC(SYSDATE,'YEAR'),12) -1 AND
TRIM(TO_CHAR(DATE,'DAY')) = 'SUNDAY'
ORDER BY DATE
OUTPUT:
DATES     DAYS
1/4/2009     SUNDAY
1/11/2009     SUNDAY
1/18/2009     SUNDAY
1/25/2009     SUNDAY
2/1/2009     SUNDAY
2/8/2009     SUNDAY
2/15/2009     SUNDAY
2/22/2009     SUNDAY
3/1/2009     SUNDAY
3/8/2009     SUNDAY
3/15/2009     SUNDAY
3/22/2009     SUNDAY
3/29/2009     SUNDAY
4/5/2009     SUNDAY
4/12/2009     SUNDAY
4/19/2009     SUNDAY
4/26/2009     SUNDAY
5/3/2009     SUNDAY
5/10/2009     SUNDAY
5/17/2009     SUNDAY
5/24/2009     SUNDAY
5/31/2009     SUNDAY
6/7/2009     SUNDAY
6/14/2009     SUNDAY
6/21/2009     SUNDAY
6/28/2009     SUNDAY
7/5/2009     SUNDAY
7/12/2009     SUNDAY
7/19/2009     SUNDAY
7/26/2009     SUNDAY
8/2/2009     SUNDAY
8/9/2009     SUNDAY
8/16/2009     SUNDAY
8/23/2009     SUNDAY
8/30/2009     SUNDAY
9/6/2009     SUNDAY
9/13/2009     SUNDAY
9/20/2009     SUNDAY
9/27/2009     SUNDAY
10/4/2009     SUNDAY
10/11/2009SUNDAY
10/18/2009SUNDAY
10/25/2009SUNDAY
11/1/2009     SUNDAY
11/8/2009     SUNDAY
11/15/2009SUNDAY
11/22/2009SUNDAY
11/29/2009SUNDAY
12/6/2009     SUNDAY
12/13/2009SUNDAY
12/20/2009SUNDAY
12/27/2009SUNDAY
Regards
Thiyag

Query create on Master Data for the items that has not shipped

Hi all,
Is it possible to report/query on Items on Master Data that has not inoviced or has not been shipped?
Running query on Sales overview cube will not bring the right data since that cube only captures the items that was invoiced. Please help!
Thanks in advance,
BW
P:S Points will be assigned.

Hi,
if u are using BI-7 for scenarios like this they have designed info set to include 2 cubes,
as info set brings intersection data u can opt for infoset, build info set on cube and ur master data then u will get the result this will be better as per performance issue.
if u are using BW then if data flow is from ODS -> CUBE then u can build infoset on ODS and master data it will be good.
if u want replacement path then u have to use RRI that is report to report interface. build char variable on ur info object in cube query so that it will brings orders which are shipped.
then build another char variable in master data query and processing type as replacement path to char var built on first query. and exclude those values which first var brings.
assign points if it helps,
thanks,
pavan.

Query returns data from previous month. Need to have it return data for the entire year

This is the part of the query that returns data by month:
(YEAR(`rereport`.`market_reports_5`.start_date) = YEAR(CURRENT_DATE - INTERVAL 1 MONTH)AND MONTH(`rereport`.`market_reports_5`.start_date) = MONTH(CURRENT_DATE - INTERVAL 1 MONTH))
How can I get it to return data for the year.
TIY

How about omitting the MONTH part:
(YEAR(`rereport`.`market_reports_5`.start_date) = YEAR(CURRENT_DATE - INTERVAL 1 MONTH)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Failed to parse SQL query: ORA-01403: no data found

I'm going to post and answer my own question in the hope that others will not have to struggle with this error.
Using a report of the type PL/SQL Function Body Returning SQL and using generic columns you may run into this error
failed to parse SQL query:
ORA-01403: no data found
The SQL will run stand alone but the report fails.
There is a setting just below the source you should check:
"Maximum number of generic report columns"
In my case the number of columns was dynamic and when it exceeded the number set as the maximium number of generic columns I received the 1403 error.
Hope this helps someone.
Greg

Thanks for much for the pointer. For anyone else struggling with this too, I found that my generic columns had unordered themselves. Reordering them solved the problem for me.
Edited by: user11096971 on Jul 22, 2010 3:19 AM

Can I get more data for free

A sheet with my bill says I can "get more data for the same price". Is this true and how do I do it?

Here is the description of the free data:
"Need an extra 1 GB of data on your MORE Everything plan this month? Now you can use your points to add 1 GB of Promotional Data to your MORE Everything plan. Once you redeem this offer, the Promotional Data will automatically be added to your account. It will remain valid for at least one full bill cycle. At this time, the offer may only be redeemed one time per account.
The 1 GB of Promotional data (Promotional Data) can only be redeemed by Verizon Wireless customers on select MORE Everything Plans that include data. Offer may not be substituted, exchanged, sold or redeemed for cash or other goods or services. Must have a valid Verizon Wireless Mobile Telephone Number (MTN). Promotional Data will be added to your existing monthly data allowance. Promotional Data will be shared by all lines on an account. You can see when the Promotional Data expires by going to My Verizon -> My Usage -> Data -> then click Promo Usage for All Lines. If you visit My Verizon immediately after redeeming the Promotional Data, you may have to sign out and sign in again to see the change reflected in your account."

APO-DP : Change in Fiscal Year Variant for the year 2008

As per earlier Fiscal Year variant configuration, the data has been forecasted in APO system till the end of Year 2008. But recently the fiscal year variant configuration modified in R/3 which has been impacting APO-DP storage buckets which are not matching with that of earlier fiscal year variant. So, there is a mismatch in the storage bucket profile where in the data already stored in Weekly, Monthly and Posting Period based on the earlier Fiscal year 2008 configuration.
Now the system is not allowing to do any Interactive Planning.
The business would like to use the latest fiscal calendar and also not ready to loose the forecasted data for the year 2008. So, we are not in a position to deactivate and reactivation of Planning Area and also we are not using back-up infocubes functionality.
Please update me if anybody experienced this type of situation or know the solution.

I think your suggestion should work but it takes more resource time and need more database size.
I am thinking to retain some important forecast keyfigures data in the following workaround method;
1) Now the Planning Area Initialized for 2yrs historical + 1Yr forecast horizon
2) Run first set of new macros to copy from year (say 2008) to year (say 2006)
3) Re-initialize the Planning Area (Jan'2006 to Dec'2007)
4) Re-build the New Fiscal Calendar from R/3
5) Re-initialize the Planning Area for history and forecast horizon (ex: from Jan'2006 to Jan'2009)
6) Run second set of new macros to copy back ( ex: from 2006 to Year 2008) and wipeout the duplicate records in 2006
7) The above macros can be utilized to run every year end when ever the new fiscal calendar introduced
Suggestions are welcome

How to get a week number for the year using oracle sql query?

hi everyone,
i have the requirement to find the week number for the calender..
so that week number should start with 01 when the year starts and it should end with week end date(that is first saturday of the january month).. so next week number starts with sunday and ends with saturday ,continously.. in the end date of the year it should not be 'saturday' but week number should end with last date of the year.. again in the next year it should start with '01'.
for example:
01-JAN-13 tuesday 01
02-JAN-13 wednesday 01
03-JAN-13 thursday 01
04-JAN-13 friday 01
05-JAN-13 saturday 01
06-JAN-13 sunday 02
07-JAN-13 monday 02
26-DEC-13 thursday 52
27-DEC-13 friday 52
28-DEC-13 saturday 52
29-DEC-13 sunday 53
30-DEC-13 monday 53
31-DEC-13 tuesday 53
01-JAN-14 wednesday 01
02-JAN-14 thursday 01
how can i achieve this, can anyone please help me out on this..
i have a query that starts with 01 when year starts but it gives problem in the end of the year .. described below with a query..
select mydate,
to_char(mydate,'day') as weekday,
to_char(next_day(mydate,'sunday'),'iw') as week_num
FROM ( SELECT TRUNC (SYSDATE, 'yy') - 1 + LEVEL AS mydate
FROM dual
CONNECT BY LEVEL <= (SELECT TRUNC (ADD_MONTHS (SYSDATE, 24), 'yy')
- TRUNC (SYSDATE, 'yy')
FROM DUAL))
this query gives date, weekday and week_num for 2 years 2013 and 2014,
when i run this query ,at the end of the 2013 it gives the result as,
26-DEC-13     thursday      52
27-DEC-13     friday      52
28-DEC-13     saturday      52
29-DEC-13     sunday      01
30-DEC-13     monday      01
31-DEC-13     tuesday      01
01-JAN-14     wednesday     01
02-JAN-14     thursday      01
for dates 29 ,30,31st it should give 53 .. how can i achieve that using this this query .. can any one help me out on this please...
thanks,
pradeep

I tried with the IW ...
it is giving week_id for the year.
select
mydate,
to_char(mydate,'day'),
case when mydate between trunc(mydate,'yyyy') and next_day(trunc(mydate,'yyyy'),'saturday')
then to_number(to_char(mydate,'yyyy')||to_char(trunc(mydate,'yyyy'),'iw'))
when mydate between next_day(trunc(mydate,'yyyy'),'saturday') and trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d')-1
then to_number(to_char(mydate,'yyyy')||to_char(next_day(mydate,'sunday'),'iw'))
when mydate between trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d') and add_months(trunc(mydate,'yyyy'),12)-1
then to_number(to_char(mydate,'yyyy')||to_char(trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d')-1,'iw')+1) end as WEEK_ID
FROM ( SELECT TRUNC (SYSDATE, 'yy') - 1 + LEVEL AS mydate
FROM dual
CONNECT BY LEVEL <= (SELECT TRUNC (ADD_MONTHS (SYSDATE, 24), 'yy')
- TRUNC (SYSDATE, 'yy')
FROM DUAL
))

How do i get the approximate size of back up file required to save on disk using sql query because i want to show the required sapce for backup on my application

hi i am face with problem that is i want to show the how much approximate space required for backup or .bak file to get backup using sql query because i want to show the required memory for backup file on my java application

Hi FIROZ
TENNALI
Is this still an issue, or can we close the thread?
* closing a thread by marking the answer/s (there is a link beneath each response) and you can vote for useful responses as well (there is a link to vote on the left of each response)
Ronen Ariely
[Personal Site] [Blog] [Facebook]

SQL query to get the Datetime 06 hours prior to the table Datetime value

Hi Experts,
I'm just trying to create a SQL query to get the Datetime which should be 06 hours prior to my Table column value(Executiontime),
Eg: my Executiontime(column) value is 07:00AM means, this query should fetch the detail of first VMName from table at 01:00AM,
SQL Table Name: TestTable
Columns: VMName(varchar),status(varchar) Executiontime(Datetime)
SQL Query : Select Top 1 VMName from
TestTable where convert(date,Exeutiontime)=convert(date,getdate()) and
status='0' and ExecutionTime > dateadd(hour,6,getdate())
Request someone to alter this Query to my requirement or give me the new one.
Regards,
Sundar
Sundar

Hi All,
Thanks for your Prompt response. I tried the below queries, but still I don't have any luck. Actually the queries are returning the value before the condition met (say when the time difference is more than 06 hours). I want the
query to return exactly @ 06 hour difference or less than 06 hours,
Query 01: Select Top 1 VMName from TestTable where
convert(date,Exeutiontime)=convert(date,getdate())
and status='0'
and ExecutionTime >
dateadd(hour,-6,getdate())
Query 02: Select
Top 1 VMName from TestTable where
status='0'
and ExecutionTime >
dateadd(hour,-6,getdate())
Query 03: Select
Top 1 VMName from TestTable where status='0'
and ExecutionTime >
dateadd(hour,-6,ExecutionTime)
Can someone point out the mistake please.
Regards,
Sundar
Sundar

How to approach in getting the dates for the user given periods

Hi All,
I have areuirement where the calendar would be like as 466 for a period
for eg. period 1(Jan) has 4 weeks
period 2(Feb) has 6 weeks
period 3(Mar) has 6 weeks
again period 4(Apr) has 4 weeks
period 5(May) has 6 weeks
period 6(June) has 6 weeks
How to get the dates (from date and end date) for the periods.
Anybody's help will be appreciated
Regards
Saugata

I have areuirement where the calendar would be like as 466 for a periodWhat does that mean? Is 466 the format of the data?
The end date depends on the start date. This query might be helpful for you
SQL> WITH data AS(
2    SELECT 1 period, 4 duration FROM dual UNION ALL
3    SELECT 2, 6 FROM dual UNION ALL
4    SELECT 3, 6 FROM dual UNION ALL
5    SELECT 4, 4 FROM dual UNION ALL
6    SELECT 5, 6 FROM dual UNION ALL
7    SELECT 6, 6 FROM dual)
8 SELECT
9    period,
10    duration,
11    SYSDATE + SUM(duration) OVER (ORDER BY period RANGE UNBOUNDED PRECEDING) * 7 AS end_date
12 FROM data
13 ;
    PERIOD   DURATION END_DATE
         1          4 16-NOV-07
         2          6 28-DEC-07
         3          6 08-FEB-08
         4          4 07-MAR-08
         5          6 18-APR-08
         6          6 30-MAY-08
6 rows selected.
SQL>

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Sql query to get Thursday (Date) for the year 2014

Similar Messages

Maybe you are looking for