SQL0968C The file system is full

Hi All,
In our BI pre-prod system we trying to test the BI data load.
It stopped giving this error in SM21
Database error -968 at FET
SQL0968C The file system is full. SQLSTATE=57011
Database error -968.
Our BI is 7.0 version ,DB2 8.1, AIX 5.3.
I checked in db2diag.log and found that temporary tablespace was full at that time.
Following is some example from db2diag.log.
2007-06-18-21.00.17.073907+060 E154034841A701     LEVEL: Error
PID     : 528538               TID : 1           PROC : db2pclnr 0
INSTANCE: db2fbr               NODE : 000
FUNCTION: DB2 UDB, buffer pool services, sqlbClnrAsyncWriteCompletion, probe:0
MESSAGE : ADM6017E The table space "PSAPTEMP16" (ID "3") is full. Detected on
          container "/db2/FBR/saptemp1/NODE0000/temp16/PSAPTEMP16.container000"
          (ID "0"). The underlying file system is full or the maximum allowed
          space usage for the file system has been reached. It is also possible
          that there are user limits in place with respect to maximum file size
          and these limits have been reached.
But we tested the same load before with approximatly same amount of data but dont know why its giving the problem this time.
How to solve this temporary tablespace issue is it require to increase the filsystem size. tablespace is in autoextent mode and fiesystem is still 20GB free.
Regards,
Manish

Hi Manish,
when looking at the error message <a href="http://publib.boulder.ibm.com/infocenter/db2luw/v9/topic/com.ibm.db2.udb.msg-search.doc/doc/sql0968-sch.htm?resultof=%22%53%51%4c%30%39%36%38%43%22%20%22%73%71%6c%30%39%36%38%63%22%20">SQL0968C</a>, the documentation states the following:
SQL0968C
The file system is full.
Explanation:
<b>One of the file systems containing the database is full. This file system may contain the database directory, the database log files, or a table space container.</b>
The statement cannot be processed.
User response:
Free system space by erasing unwanted files. Do not erase database files. If additional space is required, it may be necessary to drop tables and indexes identified as not required.
On unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the current userid. Use the chuser command to update fsize. A reboot may be necessary.
This disk full condition may be caused when containers are of varying sizes. If there is sufficient space in the file system, drop the table space and recreate it with containers of equal size.
sqlcode: -968
sqlstate: 57011
Please check also the other filesystems that belong to the database, not only the one where PSAPTEMP16 is included.
Check, if you are using quotas in your system.
Kind regards
Waldemar Gaida

Similar Messages

Crystal Reports XI String [255] limit with the File System Data driver...

I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?

Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM

File system getting full and Server node getting down.

Hi Team,
Currently we are using IBM Power 6 AIX operating system.
And in our environment, for development system, file system is getting full and development system is getting slow while accessing.
Can you please let me know , what exactly the problem & which command is used to see the file system size and how to resolve the issue by deleting the core files or some ting. Please help me .
Thanks
Manoj K

Hi      Orkun Gedik,
When i executed the command df -lg and find . -name core noting is displayed, but if i execute the command df is showed me the below information. below is an original file which i have modified the sid.
Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
/dev/fslv10     52428800 16279744   69%   389631    15% /usr/sap/SID
Server 0 node is giving the problem. its getting down all the times.
And if i check it in the /usr/sap/SID/<Instance>/work for the server node "std_server0.out file , the below information is written in the file.
framework started for 73278 ms.
SAP J2EE Engine Version 7.00   PatchLevel 81863.450 is running! PatchLevel 81863.450 March 10, 2010 11:48 GMT
94.539: [GC 94.539: [ParNew: 239760K->74856K(261888K), 0.2705150 secs] 239760K->74856K(2009856K), 0.2708720 secs] [Times: user=0.00 sys=0.36, real=0.27 secs]
105.163: [GC 105.164: [ParNew: 249448K->80797K(261888K), 0.2317650 secs] 249448K->80797K(2009856K), 0.2320960 secs] [Times: user=0.00 sys=0.44, real=0.23 secs]
113.248: [GC 113.248: [ParNew: 255389K->87296K(261888K), 0.3284190 secs] 255389K->91531K(2009856K), 0.3287400 secs] [Times: user=0.00 sys=0.58, real=0.33 secs]
Please advise.
thanks in advance
Manoj K

Setting the file system size for the emulator

Hi,
I am trying to set the file system size of the emulator so I can test what happens when the system is full and I try to write to the file system. I am using WTK 2.5.1 and I went into preferences -> storage and set Storage size to 10KB. But when I run the emulator and check the available size of the root directories using:
try {
         Enumeration roots = FileSystemRegistry.listRoots();
         while (roots.hasMoreElements()) {
            String dir = (String) roots.nextElement();
            FileConnection fc = (FileConnection) Connector.open( "file:///" + dir );
            System.out.println( "Available Size on " + dir + " : "+ fc.availableSize());
            fc.close();
      } catch ( IOException ex ) {
         ex.printStackTrace();
}I get the remaining size of my pc's hard drive, not what is remaining from the 10KB I set.
Can you tell me the correct way to do this? I don't want to fill up my pc's hard drive in order to test this!!

Has anyone got an answer to this?

***Urget*** sapreorg file system is full?

Hi All
sapreorg file system is full?

Hi Ramu
You can use SAPDBA options L (Show/cleanup) B (Cleanup log files / directories) A (SAPDBA log files and dump
directories) to reorg the sapreorg file system.It prompts you to delete directries also respond yes.Sure this will reduse
you file system.
Regards...
S.Manu

File system getting full // dev_icmmon rapidly increasing

Hello All,
/sapmnt/SID/profile file system getting full
/in this file system dev_icmmon rapidly increasing
more dev_icmmon
[Thr 258] **** SigHandler: signal 1 received
[Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
[Thr 258] **** SigHandler: signal 1 received
[Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
please help me to resolve the issue
Regards
Mohsin M

I have killed icmon process ..now problem is solved

CSS '%% The File System is not mounted.' error.

While I first thought that this was a hardware problem, I've had it happen to 3 of my CSS 11503s in the last 2 weeks. I logged into the CSS and found that the prompt had gone back to the default prompt. Upon further investigation, I was not able to do a write mem - it would just return the following error:
%% The File System is not mounted.
Has anyone seen this before? I went to reboot the unit, but I've lost access to it. I'm actually going to the datacenter today to check it further, but I was hoping someone might be able to tell me if this is a bug or software issue I might need to worry about. Any help would be appreciated. Thanks!
Additional info:
CSS 11503 - failover pair running in one-armed mode.
Version: sg0730203 (07.30.2.03)
Flash (Locked): 07.30.2.03
Flash (Operational): 07.30.2.03
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
Jason

Looks like you have a hard disk failure.
Reboot the CSS and let it go through a full diagnostic.
If it does not work after reboot, you will need to replace the unit.
If it works, this could be a one-time error.
If the error comes back, definitely replace the box.
Gilles.

After upgrade,stderr3 file is growing more than capacity of the file system

The file is located in /usr/sap/C11/DVEBMGS00/ work/ folder was increasing rapidly. How to reduce the file size? How to truncate?

Hi,
1. Could you check out SAP note 1140307 ? Update the kernel patch stated in that note, if yours is old.
2. normally, what I will do is to check the content of stderr3. see what information that keep written in repeatedly.
3. Check if you have lot of inconsistencies in the temse. See SAP note 48400
At the moment, delete stderr file which it is not active from operating sytem level.
Kindly refer to SAP note 16513 (File system is full- What to do)
Hope this helps.
Regards,
Vincent

How to extend the file system?

hello experts,
how to check wether file system is full?and how to extend the file system?

Hi,
You can check whether your file system occupancy using Unix level command df -k.
how to extend the file system?
Whats the OS platform you working upon and need to extend the file system. Based on individual OS platform commands may vary.
Regards,
Deepak Kori

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Crystal Report failed scheduling onto the File System

Hi,
We have set up a Crystal report file for scheduling via file system. This report has been running fine with regards to generation all through last few months, but has started failing to generate the report at the scheduled time onto the file system from the last few days. When I checked the logs of the Instance Manager, it shows an error like this 'Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 1017 ]'.
Please note, I was able to run the report from InfoView without any issue, so I don't believe there is any issue with stored procedure/report/database connection but something else.
Can someone please provide some insights on this.
Thanks.

Hello Satish,
Is this issue specific to FileSystem location? What about default enterprise location?
When you view the reprt in InfoView, click on Refresh button to get current data. If the repot was published with Saved Data option, then you would see data in the report but it would be old one.
Above step would confirm that there is no issues with database user credentials specified with the report.
Also, open the report in Crystal Reports 2011, refresh it and publish without saved data in BI 4 repository and schedule it.
Regards,
Mahesh

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

IPhoto9: "library could not be opened because the file system of the library's volume is unsupported."

Can please anyone help me with this issue.
After upgrading from iPhoto8 to iPhoto9 my library won't open anymore. I have stored all my pictures on a NAS (Buffalo Link Station Duo). It all worked fine but since upgrading to iPhoto9 I do have the following problem:
When opening iPhoto I receive a message that the library needs to be updated. I assume that iPhoto should just do this sort of automatically in order to upgrade to iPhoto9.However, next message I receive then is
"The library could not be opened because the file system of the library's volume is unsupported."
Apple support so far does not seem to be able to solve my issue. Anyone else having had the same issue and having a solution to this?
Thanks a lot for your help.

There is no solution.
IPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.While you have been lucky to date, many folks with a library on a NAS found that it worked for a while and then the problems started.
Workaround: Put the Library on a Disk Image formatted Mac OS Extended (Journaled) and store that on the NAS. But the real solution is to use a properly formatted disk for the Library.
Regards
TD

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

SQL0968C The file system is full

Similar Messages

Maybe you are looking for