SQLDEV 1.5.5: disconnecting from one db, quits all open editing windows

Hi,
i noticed that in SQL Developer 1.5.5 for Mac OS X, when i disconnect an open connection using the context menu, SQL developer quits all open editor windows even if they are open against different connections.
The windows remain open only if there are unsaved changes and i am asked if i want to save the changes or cancel the operation.
I believe this happened also on 1.5.4, although i could not verify it now.
Flavio
http://oraclequirks.blogspot.com/search/label/SQLDeveloper

K,
I understand exactly. When you are connected as a user and have a number of reports, worksheets and other editors open and then disconnect, the reports stay open (we have a preference to control this) and the worksheets stay open ( we have a preference to control this) , but everything else closes. That is because there is no preference and the default behavior is to close the editors. This is as designed. This is a feature that is not implemented and as such is an enhancement request and not a bug. It's still in 2.1 EA1, because we have not yet addressed it. There is no enhancement in our bug database for it. There is a bug that was addressed some years back to ensure that on disconnect the PL/SQL Editors are automatically closed.
Sue

Similar Messages

  • My Ipod has been disconnected from the internet.  All efforts to date have failed,including resetting my network settings and trying to log in again.

    My Ipod has been disconnected from the internet.  All efforts to date have failed,including resetting my network settings and trying to log in again.

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • How to make one firefox window`s actions duplicate on all opened firefox windows. duplicating tabs only opens the original source of page, not current page view

    I want to know is there a way to open, say 3, Firefox windows and duplicate the actions done on one to happen across all open Firefox windows. I want to use the repeat feature, left click followed by ENTER the whole time on a current thing I'm working on. The tabs won't work because I have to flip through them the whole time. I'm currently doing this on two computers at the same time but need an easier way. If I duplicate tabs, it only opens the original source of the page I duplicate and not the current page I'm viewing so its a time taking process to click on the links where I need to be then start doing the control+tab. Speed is a major issue so any advice would be greatly appreciated.

    I am still trying to figure out what it is you are trying to do.
    You have X number of pages open, and you want what you do to one page
    to also be repeated on the other pages? Most browsers think that multiple
    pages are individual, and separate.
    What is it you are working on? No secured information, please.

  • Move CUCM VM from one UCS220 to another during maint window

    Hello,
    I understand it is possible and supported to be able to cold migrate / host to host move a CUCM VM from one Cisco C220 server to another during a maint window to deal with a server issue.
    However I can't seem to find the exact process to follow to perform that move. We dont have vmotion but I understand it isn't needed for a cold migration between two C220's.
    thanks
    Bill

    Hi
    Yes , you are completely true.You will find all your answers here , but you have to make sure that you have vcenter.
    http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements#VMware_vMotion
    https://supportforums.cisco.com/thread/2208089
    Thank you
    Please rate all useful information

  • Passing data from one view to other in differnt window

    Hi all,
    I am developing an application in which i need to transfer some data from one view of first window to another view of 2nd window. Also first window is an modal pop up window. Can anybody help in this regard.

    Hi,
    as ayyapparaj said,
    navigate to component controller of ur application and create a node with required no of attributes.
    and map this node to window1 and window2.
    and set the required values into the context in window1 ,then these values available accross the (window2)application.
    i hope u got...
    refer this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1
    Regards,
    ramesh
    Edited by: Ramesh Babu V on Aug 27, 2008 3:36 PM

  • Moving layers from one image to another in tabbed windows

    I don't know if it's currently possible, but I've tried every which way.  But I have 8 adjustment layers I want to move from one image
    to another in the tabbed window interface.  Once selected, COPY LAYERS is grayed out.  I tried to ALT + DRAG them to the image tab I wanted to move them to but it never focuses the tab and I cannot move the layers over.

    Well if I knew the feature exists in one way or another, I wouldn't have posted it in the Feature Requests.  It was because it seemed to be absent that I did.
    I enjoy a tab-less experience, however I abhor how PSCS5 handles non-tabbed documents in Windows 7 taskbar.  it opens a unique block for each open document you have.  So if I have 20 images open as I'm slicing up a design, I have 20 Photoshop CS5 blocks at the bottom.
    I don't like the Windows 7 "Taskbar Grouping" because when you click on Photoshop, it doesn't just go to Photoshop like it should, it instead opens up a menu for you to then select Photoshop (and focus it as wanted) or select an open image.
    These all seem to be steps backwards...

  • Is the PSD created from Multi-page PDF to PSD different from one created using File- Open?

    My printer is telling me that a PSD created using the Automate->Multi-page PDF to PSD is different from one created by using File->Open. Does anyone know if this is true? If so, why?

    CMD I on the .ai file
    Change open with to AICS6
    Click Change All

  • Why does firefox send documents from yahoo mail to be opened by windows media player?

    i have fire fox set to ask me where i want documents to be sent. most of the time i have it set to send to my documents. but for the past 3 months every time i down load photos or any document sent to me from my yahoo email address they go to downloads as a compressed zip file that has to be opened by windows media player. when i click on it of course windows media says it can open the file. yahoo says it fire fox that is the problem , but fire fox doesnt do this with any thing but my yahoo mail. at any rate i would like it fixed or i dump ff and yahoo.
    sorry but im sick of both parties.

    can any one tell me how to solve the problem with ff. else i will drop ff and windows media player . ff is no good for helping any body. its just and icon their whole supposed to be support system.

  • How to Pass Variables from One Application to Another Pop Up Window

    Hi,
    I am wondering if anyone on the list has tried calling up a
    pop up manager, and have two other variables imported for secondary
    usage. I have tried using [Bindable], but this does not seem to be
    working, and I am still getting errors that tells me that the
    variables are "not defined" when it gets passed to another
    HTTPService. I tried embedding the Pop Up Manager in the same
    application as the one that is supposed to "pass the variables,"
    but it no longer acts as a pop up window.
    Could anyone please tell me where I can find the answers for
    this?
    Thanks in advance.
    Here is the code of what I have for my pop up manager:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:TitleWindow xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="vertical"
    title="New Scenario"
    showCloseButton="true"
    width="325"
    height="145" horizontalScrollPolicy="off"
    close="titleWindow_close(event);">
    <mx:Script>
    <![CDATA[
    import mx.events.CloseEvent;
    import mx.managers.PopUpManager;
    import mx.controls.Alert;
    [Bindable]public var message:String;
    [Bindable]public var message2:String;
    private function titleWindow_close(evt:CloseEvent):void {
    PopUpManager.removePopUp(this);
    private function submit_click():void {
    Alert.show(scenario_name.text, "Alert");
    new_scenario.send();
    PopUpManager.removePopUp(this);
    var win:Hello = PopUpManager.createPopUp(this,Hello, true)
    as Hello;
    PopUpManager.centerPopUp(win);
    private function reset_click():void {
    scenario_name.text = "";
    ]]>
    </mx:Script>
    <mx:HTTPService id="new_scenario" method="POST" url="
    http://localhost/simulator/scenario.php"
    useProxy="false">
    <mx:request xmlns="">
    <scenario_name>{scenario_name.text}</scenario_name>
    <message>{message}</message>
    <message2>{message2}</message2>
    </mx:request>
    </mx:HTTPService>
    <mx:Form>
    <mx:FormItem label="Scenario Name:">
    <mx:TextInput id="scenario_name"
    text=""
    maxChars="45" />
    </mx:FormItem>
    </mx:Form>
    <mx:ControlBar horizontalAlign="right">
    <mx:Button id="submit"
    label="Submit"
    click="submit_click();" />
    <mx:Button id="reset"
    label="Reset"
    click="reset_click();" />
    </mx:ControlBar>
    </mx:TitleWindow>

    Hi,
    I am trying to display some data on the Child window that
    would need to take the data from the parent titleWindow, which
    could be drop down menus, text labels or combo boxes. I would need
    to use a HTTPService on the child dialog box to accomplish task I
    think, but the problem is, how would I get the information from its
    parent window? The example I have are all about how the text input
    from the child window gets feed back to the parent.
    Would I need to create a "reverse" declaration or something
    so I can access the information from the parent in the child
    window?
    I hope this makes sense.
    Thanks for your help.
    Alice

  • CS3 Removing effect from one object changes all other images on page-!???

    I'm reusing an 80 page document that I created last year as the template for an updated version of the same document. There are images on almost every page. In the previous version of the document most images had a drop shadow applied, but this year I'm not using drop shadows so I've been deleting old photos or placing new images in old photo boxes and removing the drop shadow. No problem most of the time, but there are about 5 images in the document (scattered around randomly) that are problematic - when I either delete these or try to remove the drop shadow effect, all the other images on the page get darker (a lot darker). It's not specifically the drop shadow causing the problem - I can change the effect to any other with no change to the problem, it's just when I remove or clear all effects that the problem occurs. I even tried creating a new spread then cutting and pasting all but the problem image but it didn't work - everything was dark till I added the problem image. So weird and confounding! I've never seen this in either CS3, which I've been using for a few years, or any previous version of InDesign. The only workaround I've found is to move the problem images onto the pasteboard and keep them, but I'd rather not send the document to the printer like that. Has anyone seen this problem??? Hmm, the only thing I can think of is that I'm still using CS3 yet I upgraded my Mac OS to Snow Leapard (10.6.4). In fact, this isn't the only problem I've had with my CS3 Suite programs since I got my newer Mac. Maybe I just answered my own question, sort of. Still, has anyone seen that InDesign problem?

    Thanks Peter! You're right about the problem images being the only ones on their pages. They are all grayscale though. Rob mentions that possibility. I Sounds from both your answers like the problem is probably with the transparency blend space. Unfortunately (or fortunately?), I've never had to set the blend space. My printers have always handled that part. I hope I can ask you this newbie question -- if all the images are grayscale what should the transparency blend space be? I assume it should be in CMYK since the doc will be printed offset and the printer will have the native files not a PDF. The doc's transparency blend space is set to CMYK. Rob seems to think this could be the problem but the only choices are RGB or CMYK as far as I can tell.

  • How do I move my iTunes library from one partition to another on my Windows PC?

    Moving library from the C to the D partition on my HP laptop  how do i accomplish the move?

    Hello Curt1012,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes for Windows: Moving your iTunes Media folder
    https://support.apple.com/kb/ht1364
    Have a nice day,
    Mario

  • Client Disconnected From Database

    I'm running lookout 5.0 on one computer and logging its citadel to another machine. There is more than one lookout process on the PC that is actually running lookout itself. Different processes are logging to different designated database folders on the other computer. When you can actually get lookout to show the history info (i.e hypertrend data and such) on the computer it all works great. However if you ever restart the computer requiring to shutdown lookout, then the next time it boots up it is nearly impossible to get lookout to display the trend info again. You always get the "client disconnected from database" alarm. All the network paths and folder locations are correct. I am lost on this one.

    Did you get this error every time you reboot Lookout or sometimes ?
    If you get it sometimes:
    Simply delete the /database/ Folder in Lookout directory
    when you restart Lookout it will creat a new one.
    From experience when you get this message the database is realy damage
    i dont know why this happens.

  • How to copy/move Portal database from one machine to another?

    I am receiving a ORA-22973 error (size of object identifier exceeds maxmum size allowed) on the wwsec_enabler_config_info$ table when attempting to import my entire "portal30" schema from one database to another on different Windows NT Servers.
    Background: I had Portal 3.0.9.8 installed, configured, and running with the following setup:
    Machine 1: Windows NT 4.0 SP 6, Oracle 9iAS 1.0.2.2, Oracle Portal 3.0.9.8
    Machine 2: Windows NT 4.0 SP 6, Oracle 8i Database 8.1.7.0.0
    We no longer have use of Machine 2 and needed to move the database over to Machine 1.
    I performed the following steps:
    1. Installed Oracle 8i database 8.1.7.0.0 on Machine 1.
    2. Set up the tablespaces in the database on Machine 1 to match the same names and sizes of the tablespaces in the database on Machine 2.
    3. Used the Oracle "exp" command to export the entire database that resided on Machine 2.
    4. Copied the ".dmp" file to Machine 1.
    5. Used the Oracle "imp" command to import the entire database on Machine 1.
    6. The import completed successfully with warnings. But I had received the ORA-22973 error during the import process.
    7. After it completed I compared the list of tables and packages in the "portal30" schema between the two databases. The wwsec_enabler_config_info$ table is missing.
    8. I tried to export and import only the wwsec_enabler_config_info$ table between the two databases, but continue to receive the ORA-22973 error.
    Without the table being created, access to the portal cannot be achieved.
    Here are my questions:
    1. Is there anyway to create the wwsec_enabler_config_info$ table without receiving the noted error?
    2. Is there any other workable way to get the portal database from Machine 2 to Machine 1?
    I am aware of the portal import/export utilities but that would require me to run through the 2 hour install of Portal 3.0.9.8 on the database on Machine 1 and then individually export and import all the portal components (security, pages, applications, content library, etc). I merely wanted to transfer the entire database from one machine to another, so I felt the Oracle exp/imp utilities would be quicker and less work.

    Hi,
    I've been hitting problems with Portal 3.0.9.8.1 against 8.1.7.2.1 on NT - i.e., Intermedia not working at all, and have been advised by support to move back to 8.1.7.1.1.
    I don't want to lose any of my content in the Portal since the db upgrade and am wondering on what is the best way to do this.
    The version of the Portal will be the same so I am hoping I can just use the Portal export and import utilities, as afterall, it is just data and the schema structures are the same between db versions. I'm also hoping that the Portal export doesn't use the standard Oracle EXP tool as it doesn't work anymore on 8.1.7.2.1 on NT!!
    Regards,
    John

  • Can I move my library from one pc to another.

    is there a way to move my library and playlist from one pc to another?
    Dell   Windows XP  

    yup just plug ur ipod into the new computer well fisrt download itunes and put like 1 song in it because if u have none it will erase all your songs and if u have songs on it a message will pop up sayin this ipod is linked to another library do you want to erase and load this library click no then minimize itunes and open up my computer and double click your ipod hopefully u have it set up to be disk used if so the make your hidden files viewable and double click ipod control then click music and open the first folder and start double clickin the files and they will add to your itunes with everthing how it was

  • Newbie Qs: Copying an outline from one application to another

    My apologies for accidentally posting this question twice!
    Hello,
    I want to copy an outline from one database to another, both on the same server. I know I can save the outline as a .otl file. But how do I actually copy this saved .otl file over to the other database? Sorry if this is a very basic question, complete newbie to Essbase. Thanks.
    ps: Is there another way of copying the outline over from one database to another?
    Edited by: Sam on Jun 27, 2010 1:48 PM

    Open the outline in Edit mode, and from File > Save As, Select "Essbase Server" tab. Navigate to database where you would like to save. If you have data inside the cube, it will give you options on what to do with the data.
    Hope this helps
    Thanks,
    Naveen Mikkilineni

Maybe you are looking for

  • Help!: jTDS is not working on j2sdkee1.4!

    Hello there! I'm working with Win2k sp4, MS-Sql Server 7 and j2ee sdk 1.4 (the newest release). I'm trying to use the jTDS JDBC driver to access a MSSql database. This is the connection pool configuration: <jdbc-connection-pool connection-validation-

  • Getting "Could not complete your request" error all the time

    Whenever I try to do anything in Fireworks CS6 (CC desktop version) I get the error message "Could not complete your request. An error occurred".  The only exception is when I try to preview an image I get "Could not render the database. An error occ

  • I can't install Sun Java System Application Server!! Who can help me??

    I download Sun Java System Application Server(sjsas_pe-9_0_01-p01-windows.exe),and the first time of my installation, it was blocked after it was istalled 14%, half an hour later I canceled the installation and wanted to re-install it, and I tried ma

  • Send RFQ to Vendor with all its Attached documents

    Hi, My requirement is to Develop Program which send(Email) RFQ data to Vendor along with all documents in attachment list of ME42. Standard solution: use ZENU output type but it do not send documents in attachment list. Your response is highly valuab

  • Recover part of the database

    Guys, How do I recover a part of the database. basically somebody deleted data for dec actuals data from the database, how do I get it back, I do have a backup of the level0 export for the whole database. Your guidance is appreciated. Thanks.