Square box for character in jeditorpane

Hi,
I'm trying to display the middot character, integer value 183, in a jeditorpane, but all I'm getting is a square box. Any thoughts as to why? I believe I'm using the default encoding, ISO-8859-1. Do I need to set a different encoding, a font, or a locale? Thanks in advance...
Max

yeah, I don't think that key gets formatted correctly. I don't know if changing encoding will help... My one thought is that maybe you can do something creative like write a wrapper for Graphics that prints that character correctly.

Similar Messages

  • Non-english character display as square box

    Hi all,
    I'm not very sure if this question should be asked here or in the JRE board, thus I'm trying here also
    I have been trying an opensourced application called Alliancep2p (could be obtained from www.alliancep2p.com) using JRE 1.6 on an English Windows XP Pro machine.
    The problem:
    all chinese input are displayed as "square box". It looks like the programme "gets" the correct character, only that everything is displayed as "square box".
    It looks like a font issue, though I'm not that sure. Is there anyway the default fonts could be changed, or to get the characters correctly displayed?
    Note: I have east asian fonts installed, and the Java config panel can display chinese or other non-english characters correctly.
    I tried the same application under GNU/Linux (locale is UTF-8) and chinese input/display correctly without any problem at all. Does it mean that it is not the problem of the application, or?
    The original question in the JRE board:
    http://forum.java.sun.com/thread.jspa?threadID=5265369&tstart=0
    Thanks for all the input.

    I'm not really sure if it's a problem of the application or not. But the fact that it works perfectly under Linux makes me think maybe it's not the problem of the program, and actually their developers said that unicode is being used all over the program and seems like they're not CJK users also.
    I'm not a java guru so I can't really tell from the source if there's anything wrong.

  • Chinese Character displayed as square box

    I have been trying an opensourced application called Alliancep2p (could be obtained from www.alliancep2p.com) using JRE 1.6 on an English Windows XP Pro machine. The problem is all chinese input are displayed as "square box". Searching for a particular chinese phase works, only that everything is displayed as "square box". It looks like a font issue, though I'm not that sure. Is there anyway the default fonts could be changed, or to get the characters correctly displayed?
    Note: I have east asian fonts installed, and the Java config panel can display chinese correctly.
    I tried the same application under GNU/Linux (locale is UTF-8) and chinese input/display correctly without any problem at all. Does it mean that it is not the problem of the application, or?
    Thanks for all the input.

    Hi,
    Please check below notes which could be helpful for your issue
    After Korean Language Installation Oracle Apps Displays All Characters As Squares [ID 731894.1]
    Chinese Display as Square on the Form Menu after Apply NLS Patch 6678700_ZHT [ID 839957.1]
    Chinese Characters are displayed as Empty Squares using Courier New Font [ID 578656.1]
    Regard
    Helios

  • How to create a square box around a word or character

    L.S. I am looking for a way to create a square around a word or character like in the exemple. Can indesign do this? And if yes, how? Thanks in advance for your help.

    Sorry about that Peter. I am new at this. This is the image I was talking about. I also found an old post (2008) in the indesign google group.
    https://groups.google.com/forum/#!topic/adobe.indesign.windows/ojCr0qI2GBI 
    It says inthe 2008 post " . . .  there is no 'border' support for character styles." I was wondering if maybe in CS6 there is a way to achieve this?

  • IPhoto: No pictures only broken-line/square boxes where pictures should be.  Scanning with the bar slide the pics appear for one or two seconds then are gone.

    Grandson Son sabataged my IPhotos!  Can't get pics to appear.  Only broken-line/square boxes where the pictures should be.  Scrolling with side bar brings up pics for 1 or 2 seconds then they are gone again.  HELP!  Please....
    Raefisch

    Restore from your back up is the most obvious way forward.
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

  • TS2832 My laptop, after updating to Apple Remote Desktop 3.7.1 , won't boot...I get a grey square box saying I have to restart my computer by holding down the start up key. I reset the pram, and it worked for about 5 days, now nothing works??

    My laptop keeps shutting down to a square box with writing that says, you must restart your computer. Use the start up key and hold it down. athen it has some writing looks like german or dutch also in the box. The first time it did this, I updated to Apple Remote Desktop 3.7.1 and I reset the pram and it worked fine for about 5 days. Then it started doing the same thing, but this time resetting the pram doesnt work for repair, and I also cant start up in safe mode now. Any ideas what happened, or suggestion on a fix for this?????
    Any help would be appreciated!!!!!!

    My laptop keeps shutting down to a square box with writing that says, you must restart your computer. Use the start up key and hold it down. athen it has some writing looks like german or dutch also in the box. The first time it did this, I updated to Apple Remote Desktop 3.7.1 and I reset the pram and it worked fine for about 5 days. Then it started doing the same thing, but this time resetting the pram doesnt work for repair, and I also cant start up in safe mode now. Any ideas what happened, or suggestion on a fix for this?????
    Any help would be appreciated!!!!!!

  • Small square boxes appearing on blank lines (UPDATED) - The question is, how to get rid of them?

    *******  As to my display name "All I tried were in use" - when I registered at the Adobe site to use the Browser Lab, I tried something like 10 or 12 user names and finally gave up and went with "All I tried were in use" - my name is Bob
    ------------------------------- UPDATE --------------------
    The problem, small square boxes showing on lines in Freetext Tool comments, is not limited to blank lines, as I originally reported here. These boxes are showing up at the end of every line. It does not matter if the line break is hard or soft, whether the line is empty or not.
    Please read the original post bearing mind that the  problem is occurring at the end of all lines.
    Also - here is a screen capture of a part of one comment box, showing the square lines. I didn't show the entire box because the material above the area I'm showing is a tad private or confidential. Here is the image showing the boxes - note that there is no box at the end of the last line in the comment.
    -------- Original Post ------------
    We have a copy of Acrobat 5.0. and up until now it has done what we need, which is not much more than adding bookmarks, links, and some touch up. I know it is very old and I know things change. I'm hoping this has nothing to do with the release we are using. I would think this would be a backward compatibility issue if it is a problem with newer Reader versions dealing with PDFs "edited" with 5.0.
    I am having small square boxes showing up on blank lines. (read my update above  - the boxes are at the end of all lines, soft break or hard break))
    I'm a programmer (37+ years in most all aspects of Data Processing) and I decided to learn the PHP programming "language" to add some server side processing to some of my web sites. So, I found a fairly good manual on PHP in PDF form and have been using it.
    I quickly found that the PDF didn't have a single link in it and no bookmarks, so I've been adding them as I look up a particular subject. I'm also adding comments and notes to document things not in the original manual or to add comments that would help other programmers` (who know  other languages) to adjust to PHPs' way of thinking - for example: in all the other languages I know (perhaps two dozen) to get rid of a file, you "delete" it. In PHP you "unlink" it.
    I've added a lot of comments and notes like that and when I view the PDF in Reader (on this computer I have 9.4.2) I'm seeing small square boxes on empty lines. The lines were created when I pressed Enter twice to insert a blank line between paragraphs. (again, read the update at the top of this message - the boxes are at the end of all lines, soft break or hard break)
    How can I get rid of them?
    They are not present when I've got the PDF open with Acrobat, only when I'm using an Acrobat Reader.
    They are also not present if I look at the comments using the Comments navigation panel - that is, they still show on the page, but they don't show in the copy of the comment displayed in the navigation panel.
    They are not present in Notes or when I use one of the shape tools (Square Tool, Circle Tool, or Line Tool) to create notes. They are only present in Freetext Tool comments
    They are clearly being show where there are successive line feed/carriage return characters - but how do I get rid of them?
    I JUST THOUGHT OF SOMETHING - I realized that I'd not printed any of the pages on which I have placed comments and wondered if the boxes show when printing the PDF with Reader -- they do. They are not present if I use Acrobat, not a Reader, to print the same page.
    Any assistance you can provide will be greatly appreciated.
    Please don't tell me to get a newer version - an expenditure like that is simply and totally out of the picture. For us, this is a Depression, not a Recession - we are self-employed and our businesses have been severely hammered since 2006 - we are down to about 1/4 of our income before the big guys trashed the economy.
    Bob
    P.S. Do you know that you can have a heart attack without chest pain, shortness of breath, or left arm  pain? Well, you can! I've had two and the first one nearly killed me because I had no clue it was a heart attack. You can read about it first one here.  Pass this on, it could save a life.
    My second heart attack occurred on October 4, 20112 - it began, around 3:15 AM, as the first one did, with a headache. It turned out the stent implanted in 2002 had been completely clogged by too much tissue grown. The doctor put another stent inside the first one.

    Problem Resolved - it is a font issue. Apparently Acrobat can't handle particular fonts and it is best to stick with a very small slection of fonts - Arial, Helvetica, Times Roman.
    I haven't test a lot of fonts. If I do, I'll post there results here.
    Bob

  • How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • Square boxes instead of Japanese characters in pdf output of a crystal rep

    Hi All,
    Did anyone of you ever faced such an issue, where the pdf output of a crystal report shows square boxes instead of Japanese characters when the output is saved in pdf. However the crystal report output looks perfect. I have saved the ouput in xls and rtf formats the characters look perfect as required, the issue we have is when the output is saved as pdf.
    I have language pack installed on my machine.
    My guess is that the few Character's width is not sufficient and few Characters in other fields appear perfect in pdf. I have to test this, it might take few days before I can access this report. Before that I want to gather information. If anyone has solution to this issue please let me know.
    Thanks,
    Ravi

    Hi,
    Could you please answer the following questions
    1.What version of Crystal Reports are you using?
    Go to Help-> About to find out.
    2.What is the font you are using on the report?
    Try to change the font style to MS Gothic or Arial Unicode MS, most preferably MS Gothic.
    And export the report to PDF format.
    This may help you
    Thanks,
    Praveen G

  • Since latest update touch sceen not working correctly,square box on screen and cant navigate around apps and slide screen to screen

    since updating to latest update touch screen has gone crazy with a box appearing around apps and cant move around by touching creen as before,plus i cant slide from screen to screen due to square box around apps.

    Sounds like some Accessibility Settings were turned on.See this article for steps on how to turn them off.
    http://support.apple.com/kb/ht3577
    B-rock

  • I am creating box for two coloums in sap script

    hi,
    i am creating box for two coloums
    when i am creating box for this two coloums this box is displaying from the top.
    when i am decreasing this hight it is decreasing from the buttom of the window
    i want to decrease from the top of window
    can u explan plz
    this requirement
    plzz

    see this:
    BOX Command
    Syntax
    /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
    Effect: draws a box of the specified size at the specified position.
    Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
    XPOS, YPOS
    Upper left corner of the box, relative to the values of the POSITION command.
    Default: Values specified in the POSITION command.
    The following calculation is performed internally to determine the absolute output position of a box on the page:
    X(abs) = XORIGIN + XPOS
    Y(abs) = YORIGIN + YPOS
    WIDTH
    Width of the box. Default: WIDTH value of the SIZE command.
    HEIGHT
    Height of the box. Default: HEIGHT value of the SIZE command.
    FRAME
    Thickness of frame.
    Default: 0 (no frame).
    INTENSITY
    Grayscale of box contents as %.
    Default: 100 (full black)
    Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
    Units of measurement: The following units of measurement may be used:
    TW (twip)
    PT (point)
    IN (inch)
    MM (millimeter)
    CM (centimeter)
    LN (line)
    CH (character).
    The following conversion factors apply:
    1 TW = 1/20 PT
    1 PT = 1/72 IN
    1 IN = 2.54 CM
    1 CM = 10 MM
    1 CH = height of a character relative to the CPI specification in the form header
    1 LN = height of a line relative to the LPI specification in the form header
    /: BOX FRAME 10 TW
    Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
    /: BOX INTENSITY 10
    Fills the window background with shading having a gray scale of 10 %.
    /: BOX HEIGHT 0 TW FRAME 10 TW
    Draws a horizontal line across the complete top edge of the window.
    /: BOX WIDTH 0 TW FRAME 10 TW
    Draws a vertical line along the complete height of the left hand edge of the window.
    /: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
    /: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
    POSITION Command
    Syntax
    /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
    Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
    Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
    XORIGIN, YORIGIN
    Origin of the coordinate system.
    WINDOW
    Sets the values for the left and upper edges to match those of the current window (default setting).
    PAGE
    Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
    /: POSITION WINDOW
    Sets the origin for the coordinate system to the upper left corner of the window.
    /: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
    Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
    /: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
    Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
    Pre-Setting BOX Position Arguments
    You can use the POSITION and SIZE commands to preset some arguments in the BOX command. POSITION presets the start point (upper left corner) of a box or line. SIZE specifies the width and height of a box.
    You can use POSITION and SIZE to preset arguments, but you can also set the start point and size arguments of a box or line directly in the BOX command.
    By default, if no positioning is specified, the upper left corner of a box or halftone or the top of a line is aligned with current SAPscript window. That is, the upper left corner of the box, halftone, or line starts at the upper left corner of the current window in the active form. By default, the height and width of a box are set to the height and width of the current window.
    Use POSITION and SIZE to preset the arguments in a BOX command in the following situations:
    The BOX command exceeds the 132-character (1 line in SAPscript) length limitation if you specify all arguments directly in the command. You may exceed this length limit if, for example, you use symbols in a command.
    By pre-setting arguments with POSITION and SIZE, you can work around the limitation on the length of a command. You do not need to specify the preset arguments in the BOX command.
    You want to use the enhanced capabilities of POSITION for adjusting the starting point of a box or line.
    With BOX, you can specify an offset for the starting point only as a whole number (non-negative integer). This command would print a box starting 1 CM to the right and 1 CM down from the left upper corner of a window:
    /: BOX XPOS '1' CM YPOS '1' CM
    With POSITION; you can adjust the position of a line or box relative to a window much more precisely. In the POSITION command, you can specify positive and negative offsets and use non-integer numbers.
    Example: The commands shown below position a box slightly to the left and slightly above a window. This leaves a margin between the edge of the box and the text in the window.
    /: POSITION XORIGIN '-.2' CM YORIGIN '-.2' CM
    /: SIZE WIDTH '.2' CM HEIGHT '.2' CM
    /: BOX FRAME 10 TW
    (Note that the box must be enlarged to accommodate the shift. If it is not enlarged, then it will not cover all of the window.)
    You can also use POSITION to set the starting point to the upper left corner of the active page format. Example: POSITION PAGE moves the starting point from the active window to the active page format.
    You want to use the relative sizing capabilities of SIZE to adjust the size of a box, line, or halftone.
    With BOX, you can make only absolute size specifications. BOX HEIGHT, for example, overrides the default height setting to the height of the current window.
    With SIZE, you can adjust the size of a box or a line with respect to its previously-set dimensions. The following commands would, for example, draw a frame 1 CM in from the margins of the paper:
    /: POSITION PAGE
    /: POSITION XORIGIN 1 CM YORIGIN 1 CM
    /: SIZE PAGE
    /: SIZE HEIGHT '-2' CM WIDTH '-2' CM
    REWARD IF HELPFUL

  • Newbie: Simplified Chinese characters are displayed as square boxes

    Hi,
    I am using Windows XP Simplified Chinese Version SP3, Sun JDK5.0 Update 20. I want to run Apache Ofbiz POS; however, the Chinese characters (zh) in PosUiLabels.xml are all displayed as square boxes.
    I have tested run Ofbiz in Mac OS X and the Simplified Chinese are displayed normally, and other languages can also be displayed in Windows XP.
    What should I do?
    Regards,
    Terence
    <?xml version="1.0" encoding="UTF-8"?>
    <!--
        Licensed to the Apache Software Foundation (ASF) under one
        or more contributor license agreements.  See the NOTICE file
        distributed with this work for additional information
        regarding copyright ownership.  The ASF licenses this file
        to you under the Apache License, Version 2.0 (the
        "License"); you may not use this file except in compliance
        with the License.  You may obtain a copy of the License at
        http://www.apache.org/licenses/LICENSE-2.0
        Unless required by applicable law or agreed to in writing,
        software distributed under the License is distributed on an
        "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
        KIND, either express or implied.  See the License for the
        specific language governing permissions and limitations
        under the License.
    -->
    <resource xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        <property key="PosAdjustment">
            <value xml:lang="en">(adjustment)</value>
            <value xml:lang="es">(adjustment)</value>
            <value xml:lang="fr">(ajustement)</value>
            <value xml:lang="it">(adjustment)</value>
            <value xml:lang="ro">(adjustment)</value>
            <value xml:lang="zh">(&#35843;&#25972;)</value>
        </property>
        <property key="PosTotalReport">
            <value xml:lang="en">TOTALS REPORT</value>
            <value xml:lang="es">REPORTE TOTAL:</value>
            <value xml:lang="fr">TOTAUX</value>
            <value xml:lang="it">TOTALI STAMPA</value>
            <value xml:lang="ro">TOTAL REPORT</value>
            <value xml:lang="zh">&#21512;&#35745;&#25253;&#34920;</value>
        </property>
        <property key="PosTxId">
            <value xml:lang="en">TXID</value>
            <value xml:lang="es">Número de venta</value>
            <value xml:lang="fr">N°vente</value>
            <value xml:lang="it">IDTAX</value>
            <value xml:lang="ro">IDTAX</value>
            <value xml:lang="zh">&#20132;&#26131;&#21495;</value>
        </property>
        <property key="PosULogin">
            <value xml:lang="en">Enter User ID:</value>
            <value xml:lang="es">Ingrese su login:</value>
            <value xml:lang="fr">Entrez votre identifiant :</value>
            <value xml:lang="it">Inserire Id Utente:</value>
            <value xml:lang="ro">Introduceti Id Utilizator:</value>
            <value xml:lang="zh">&#36755;&#20837;&#29992;&#25143; ID:</value>
        </property>
        <property key="PosUPassw">
            <value xml:lang="en">Enter Password:</value>
            <value xml:lang="es">Ingrese password</value>
            <value xml:lang="fr">Entrez votre mot de passe :</value>
            <value xml:lang="it">Inserire Password:</value>
            <value xml:lang="ro">Introduceti Parola:</value>
            <value xml:lang="zh">&#36755;&#20837;&#21475;&#20196;:</value>
        </property>
        <property key="PosUserNotManager">
            <value xml:lang="en">User is not a valid manager!</value>
            <value xml:lang="es">El usuario no es administrador válido</value>
            <value xml:lang="fr">Cet utilisateur n'est pas un gérant !</value>
            <value xml:lang="it">Utente non è un manager valido!</value>
            <value xml:lang="ro">Utilizatorul nu este un manager valid!</value>
            <value xml:lang="zh">&#29992;&#25143;&#38750;&#21512;&#27861;&#31649;&#29702;&#21592;!</value>
        </property>
        <property key="PosValidating">
            <value xml:lang="en">Validating...</value>
            <value xml:lang="es">Validando...</value>
            <value xml:lang="fr">Validation...</value>
            <value xml:lang="it">Validazione...</value>
            <value xml:lang="ro">Validare...</value>
            <value xml:lang="zh">&#30830;&#35748;...</value>
        </property>
        <property key="PosVoid">
            <value xml:lang="en">Enter Order Number To Void:</value>
            <value xml:lang="es">Ingrese número de orden a anular</value>
            <value xml:lang="fr">Entrez le n° d'ordre à annuler :</value>
            <value xml:lang="it">Inserire Numero Ordine Da Svuotare:</value>
            <value xml:lang="ro">Introduceti Numarul Comenzii de Descarcat:</value>
            <value xml:lang="zh">&#36755;&#20837;&#35201;&#20316;&#24223;&#30340;&#35746;&#21333;&#21495;:</value>
        </property>
        <property key="PosWaitingFinalSales">
            <value xml:lang="en">Waiting for final sales data transmission...</value>
            <value xml:lang="es">Esperando transmisión de datos...</value>
            <value xml:lang="fr">En attente de transmission de données ...</value>
            <value xml:lang="it">In Attesa di trasmissione dei dati vendite finali...</value>
            <value xml:lang="ro">Asteptare pentru transmiterea datelor de vanzare finale...</value>
            <value xml:lang="zh">&#31561;&#24453;&#26368;&#32456;&#38144;&#21806;&#25968;&#25454;&#20256;&#36755;...</value>
        </property>
    </resource>

    When you say "displayed" I assume you mean displayed in some GUI component. In which case you should assign a font to that component which can render those characters properly.

  • How to handle Invalid characters(Square Box) in BI

    Hi All,
    Daily I am  getting Invalid character(Square Box) issue with 0Material description and material manufacture part number when the it is being loaded to targets.
    This data is being loaded to many data targets and daily they are being failed .
    I have checked the text in MARA Table and found that there also the square box is appearing in the description.But when i copy the text and past it in word document in the place of box it is appearing as space/Tab.
    Can you please help me how to handle this type of issue in BI .
    Thanks in advance

    Hi Binbi1,
       This eror is due to carriage returns which turns into a square box when transferring data, this can not be corrected through the RSKC, this is solved through an ABAP routine in the transformation rules, use this code:
    DATA i_text type c length 60.
    i_text = SOURCE_FIELDS-/BIC/ZMBS_FT1. "this is your material description field
    REPLACE ALL OCCURRENCES OF '#'
              IN i_text WITH ' '.
    REPLACE ALL OCCURRENCES OF '□'
              IN i_text WITH ' '.
    RESULT = i_text.
    I hope this help you....

  • Moving a square box freely

    I am using Pages for mac for the first time
    I wanted to create a simple check list document for work with a comment on the left and a little square box on the right that i may tick
    the text on the left is no problem obviously...but the little box is a nightmare.....i can make it...but to align it with the line of text, i have to use the X and Y or manually
    type in a number to try get it into the right position. Isn't there a way i can grab the box and just drag it to where i want it?? and then copy and paste it down??
    Thanks for any advice

    1. There are are Unicode check box glyphs: ☐ □ ▫︎ ◻︎ ❏ ❐ ❑ ❒ ☑︎ ☒ you can copy these from here but they are in your Special Characters
    2. You can click on the box edge, see the corner handles and copy, then click into the text where you want it and paste.
    3. Once it is in the Text you can adjust its position relative to the text using baseline shift
    4. To position it accurately horizontally make a tab on the ruler and position the box after a preceding tab
    Peter

  • What is square box's functions?

    Does the small square box immediately before a tracks name have any other other function other than to decide which CD's to record into library when you insert a CD? Is it used for sync function for instance? I can see no reference to it in the help screen.

    Yes, this is correct ONLY IF on your device, you have the setting "Sync only checked items" marked. You can do this from the device summary tab when the device is connected.
    And yes, this approach is usually considered not optimal for management. It's only really handy if you have a select few items you wish to exclude from your device.
    An option people PREFER to go with is create a PLAYLIST which has all of the music they want to sync to their device, and then setup their device's sync settings to only sync that playlist. You have numerous media sync options from your device's menu and corresponding tabs

Maybe you are looking for

  • Saving and backing up iMovie projects

    Here is a question I never dreamed I'd be asking: how do you save an iMovie "project"? Since 1984, every Mac application has had "Save" under the "File" menu where you could name and save your file. "Save often" became the main way to avoid disaster

  • How to remove the copyright Text

    Hi, I wan to remove the copyright text(*Copyright (c) 2006, Oracle. All rights reserved.*) from the OAF page. How to do that? Any help would be highly appreciated.. Thanks...

  • RE: White Balance and Color Temperature

    Can we do the same kind of White Balancing, Like we have In Photoshop Camera Raw, In Premiere pro ? Also, can we change the Color Temperature In Premiere Pro? Thanks.

  • Splitting up one threaded story into TWO threated stories

    Is there another script available than 'Break frame' and 'Split story' because they don't do what I need. For example: I have 4 pages with linked text frames. Now I want to cut the story in two at the end of page 2 and restart at the beginning of pag

  • Trouble with viewing "Now Playing"

    My 30GB Video iPod was working fine until a few weeks ago when the Now Playing screen started only displaying album artwork. It does everything else fine, plays games and lists songs, but Now Playing just doesn't work and it's driving me crazy becaus