SR12 camera suddenly not recognised

Hi there. I have been capturing footage into FCP from my Sony SR12 without any problems....until today. It seems like FCP doesn't recognise that the camera is plugged in and connected. The camera is showing up on the mac and i can see that the files are there.
When I am pressing USB connect (hard drive) on the Sony it seems to connect ok
When I click "log & transfer" the L & C window opens but the footage doesn't populate. No thumbnails or anything show in the L&C window.
Previously its just automatically showed the files as soon as I open the L&C window.
Anybody have any suggestions for what I have done wrong?
I have been editing a different SD project in between, does the fact I have edited a project with different project audio/visual settings muck things up when then trying to capture AVCHD footage into a previous saved project. Can't think it would as FCP should let you capture different source media into same timeline.
Cheers
Message was edited by: mr bluefin

Sorry I obviously confused you. I am not trying to work with my AVCHD footage in a Pal seq, it was just an example asking if it is critical to be working in a Pro Res project for the L&T to connect properly or is the seq you are in not important. I am trying to think of what has changed since my AVCHD stuff was working fine. The only thing I have done since is work on another project in FCP that was a SD pal project. I was just thinking that when I changed my project settings to work on the SD Pal job, the settings then have to be changed to work back on my AVCHD project ?

Similar Messages

How do I add a new camera so I can still shoot in RAW? my new camera is not recognised.

Hi! I have Photoshop Elements 11 and I started with a Canon 1000D, I was able to shoot in raw, then convert my images to JPEG for sharing.
I have since upgraded cameras and when I upload a RAW file off my camera card, it immediately makes a copy of the photo in JPEG and I can only access that one, the program tells me that my camera is not recognised by PSE 11.
Can somebody please direct me to the right location to change the camera model, so that I can once again shoot in RAW?
Thank you!!

Which camera are the camera raw files from?
Which operating system are you using?

Why does the printer suddenly not recognise the computer

why does the printer suddenly not recognise the computer

salkenward
Welcome to the HP Community Forum.
This issue is frequently caused by a driver malfunction although the problem could be just about anything.
You didn't provide any information.
The good news: You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
Install Full Feature Software – Printer
Take a look at the helpful videos if you need help with the installation.
Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
There is a new "Print Doctor" in town for many printer models. If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

External monitor suddenly not recognised

Hi everyone,
Not sure if anyone can help me, but thought I'd try here before progressing any further. I have an 11-inch 2010 Macbook Air with an external monitor set up (Acer LCD, if it makes a difference) through a mini-display port to HDMI converter. Up until yesterday it was working with no problems, the HDMI does sound as well as video and it was very easy to set up and use.
Yesterday I tried plugging in the converter to the Air and turned the display on and I got a "Cable not connected" message on the display. I checked the plugs and restarted my Mac, but the same message came up.
The Air's screen flashes blue when the display is turned on, so the cables must be working to some extent (at least enough to recognise the display has been turned on). But the display system prefs and menu doesn't show it connected, and there's no option to turn mirroring on or anything, as there usually is.
Unfortunately I don't have any other HDMI cables or a converter to test this, but I was wondering if I can try anything else on my Mac before tracking some down. Would appreciate any help.

deed wrote:
My Macbook Pro ran out of hard disk space, and suddenly stopped recognising my external hard drive
Hi, and welcome to the forums.
It's very unlikely these two things are related, even though they apparently happened about the same time.
As you probably know, OSX likes at least 10% of it's drive free, 15% is better, 20% optimum (although I suspect that on very large drives, you don't need quite as much free space, percentagewise).
As dechamp says, the best way to be sure the drive is dead is if another computer doesn't recognize it either. In theory, something like DiskWarrior might be able to deal with it, but it's pretty unlikely to be worth the money (about $100 for DW) if you don't already have one.

Iphone 4 suddenly not recognised by windows 7 (32 bit)

I regularly synced my iPhone 4 with my PC without hitch. Now, all of a sudden, Windows doesn't even recognise the phone so trying to sync via iTunes is impossible. I've reinstalled iTunes but still get 'USB device not recognised'. I've even tried connecting with the firewall turned off. The PC and phone also don't seem to be be able to see each other via Bluetooth. I'm using iTunes 10.4.1.10.
Can anyone tell me what's going on here?
Any help would be much appreciated!

I have the same problem and I tried all of this and it still doesn't work. Do u have any other suggestions to resolve the problem. 2-3 weeks ago this problem didn't exist. Thank u!

Lumia 920 camera suddenly not working after app up...

I have had yellow Lumia 920 now for about 3 weeks and everything worked just fine. Yesterday evening (european time) I saw update reminders on the "shop" tile and there were 3 or 4 of them (Nokia drive+ and some others that I don't remember). I was doing something and didn't give a thought but just let the updates to be downloaded and installed and they went fine as far as I know. Today when I tried to take photos the camera suddenly dosen't work anymore. No matter if I click the hardware button or the camera app tile, it just flip back to live tiles. Camera doesn't work on Bing search either and not on any apps that utilized the camera.
I wonder if anyone else have this problem or what I should do next... I have restart the phone a few times but it didn't help... I haven't hard reset it because I have so many stuff in the phone, if there is a easy way to do it I rather not hard reset it...
Any suggestions are greatly welcome!

I have the same problem. I am not sure if an app update is what caused this, but my camera on my new Cyan Nokia Lumia 920 has stopped working. I took two photos yesterday, but when I tried to take some today my camera was a completely black screen with the bottom buttons grayed out and the top bottom to view recent pictures highlighted and still working. I don't know what to do because I purchased this phone off of Ebay and everything worked fine after I purchased it. I'm hoping I didn't get a faulty phone.
I have tried everything.... soft reset, deleting all the camera apps, and tried to reset the camera. I want to avoid doing a hard reset because it bricked my last Nokia and I don't want that to happen.
The only way I can use my camera is through an app, Nokia Glam Me. But it only uses FFC (front facing camera)
I don't know what else I should do.
Help. Please...

Colour cartridges suddenly not recognised

From time to time my printer decides it will not recognise the colour cartridge any longer. I use 75xl. This is despite the cartridge having worked perfectly up until that point, and definitely not being empty. I take it out & put it back in and the messages alternate between the cartridge being incompatible, or missing. When this has occurred previously I have put in a new cartridge and it's resumed working. I then put the old cartridge it previously woulrn't recognise back in & away it goes until the next time. It's just happened again, after successfully printing a couple of pages. I put my spare cartridge in and it wont recognise that either now. As there is a missing cartridge it wont print at all. not even in black & white. I've really had it with this printer, and the lack of support from HP. My printer is out of warranty, but still printing/scanning/ photocopying just fine .. when it will recognise the colour cartrigde. any ideas?? Or should i just go & buy another brand printer?

Hi Anthea White,
I'm sorry you are having issues with the print recognizing colour cartridges. There is actually circuitry between the ink cartridges and the circuitry in the printer. I'm attaching a document that describes how to clean these electrical contacts. Sometimes ink or dust prevents a connection from being made.
I hope this will help you!
I am an HP Employee

Perplexing problem with iMac suddenly not recognising iWire access

I have a 24" iMac which has been running the most uptodate OSX Leopard software (I also have a PowerBook running the same, which is relevant).
Two days ago, my iWire connection to my broadband suddenly stopped. That is, when I opened up my iMac and it started searching for my iWire network, it found it, but then continually asks me for my WEP password, which I enter, then it says there a connection timeout and it will not connect to it.
Now, I know the Airport network is working fine, and the password hasn't changed, because I still get a perfect connection to my broadband via my Powerbook.
So, I've since tried a clean system install, and whenever the iMac searches for a computer link, it asks for a WEP password which I put in - accurately - and it no longer recognises it, even though I'd done nothing the change the settings. The only clue I have is that, during a software update, I do recall a firmware update for iWire, which I think I accepted. Has that caused it? But if so, why does it not affect my other PowerMac.
Am absolutely flummoxed and perplexed. Is this a firmware problem, in which case, how do I solve it?

Hey Bushey,
I see that you had an issue with your aiport express not working, try this out:
Firstly, there are some issues with the airport utility for Leopard and AX.
you might want to try this:
1) update the firmware of the AX to the latest by downloading the firmware update from the link below:
http://www.apple.com/support/downloads/airportexpressfirmwareupdate63formacosx.h tml
2) IF it still persists, Using the Airport Admin Utility for Graphite and Snow will sucessfully resolve the issue.
http://www.apple.com/support/downloads/airportadminutilityforgraphiteandsnow425. html
BEST of LUCK

LR Photo Import from Camera suddenly not working (5.7.1) - States "Some import operations were not imported becuase they could not be read." Works on another computer and 4.3 version of LR on same computer but not newly installed LR 5.7.1 cc 2014.

As above, all of a sudden, on one computer I cannot download from either the Canon 50D or 70D into LR 5.7.1. It will download on another computer as well as on this computer in an older version of LR (4.3). When I first turned on the computer this morning, I also got an error message that "The Lightroom catalog named 'Lightroom 5 Catalog" cannot be opened because another application already has it opened." It was a cold boot, so I am not sure what is happening.

For the second problem being that the catalog is open in another application, go to the folder containing your catalog. You will find a file with the .lock extension. This is a file created by the catalog, and is automatically deleted when the catalog closes normally. Sometimes it can get left behind. You need to delete that file.
When Lightroom says that the file cannot be read, it usually means that it cannot be written to the chosen destination. This tends to be a permissions problem in your operating system. Check to make sure you have write permission for the folder you are trying to import your images to.

FireWire suddenly not recognising device?

I have searched high and low for an answer to this and now I'm just plain tired, so I hope someone here can help me in a hurry.
I have a Sony DCR-HC15E Camcorder which used to transfer fine in iDVD and burn DVDs for me with no problem at all. Suddenly it no longer does it. I am at a loss as to what to do to fix this problem.
I am connecting using a FireWire cable but the device is not showing up in "about this Mac".
The Sony website only provides information and downloads for Windows users.
I am desperate for any help someone might be able to give me as I need to download and post a DVD of my young son for an overseas medical assessment ASAP!
Thank you in advance for any help.

Hi.
Is the Camcorder in VCR mode?
Does iMovie recognize the Camcorder? If so, then quit iDVD and move this file to the Desktop:
User/Library/Preferences/com.apple.iDVD.plist
and try again with iDVD.
Do other peripherals mount through the Firewire port? If so, try another FireWire cable.
If none of the above works, just do an SMC reset.
Good Luck.

Facetime Camera suddenly not working on any applications. Won't even show up/be recognzied.

I own a 15 inch Macbook Pro Retina, Mid 2012
and recently when I try opening facetime, photobooth, or even skype my mac won't recognize the camera. It acts as if I don't have a camera.
This issue was going on with Mountain Lion, so I installed Mavericks. Still not working.
I've already tried resetting my default keychain, updating to Mavericks, typing in some stuff in the terminal, restarted and shut down MULTIPLE times, going to disk utility and verifying/reparing utilities and the disk, nothing seems to work.
PLEASE HELP ME

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Aperture suddenly not recognised by system screensaver

All of a sudden, I can access Aperture through my regular screen saver...... any clues as to how to reinstate it?

Welcome to the forums guys!
The sharing of previews with iLife/Screen saver seems to be an issue at the moment. Some of my libraries it works, others it does not. A couple of suggestions that have been floated are to regenerate all of your previews, create a new library and import your old one into it. There are also suggestions about deleting a specific file which works for some and not for others.
Tony

Nano suddenly not recognised by i tunes when it has before?

Why when my nano was syncing ok should it suddenly stop?

Hello Catherine0303
If you have not seeing iTunes, check out the article below to get more info on troubleshooting depending on the symptom on either Windows or Mac.
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
Regards,
-Norm G.

Firewire suddenly not recognised

Have been using my nano with the firewire cable it came with since january. Used a friend's USB with the nano yesterday and not when I plug it in with the firewire it says "firewire connections are not supported. To transfer songs, connect the USB cable provided." Help!

Have been using my nano with the firewire cable it came with since january
Then you have the only Nano that came with a Firewire cable and the only Nano in the world that can use Firewire.
When did that change?
It changed when they made the very first Nano.
The Nano cannot and has never been able to use Firewire.
I've always used it before...
Not to sync you didn't.

My Ram suddenly not recognised ?

Hi,
I just did a MP2v encode session, I noticed my Intel Macpro 3ghz was having trouble with background programs while this encode was happening.
so i waited till it finished and on checking my extra 4gig of ram does not show in sys profiler. I shutdown, pulled the lower riser with the 4 gig extra and re sested the ram and re inserted into Macpro, booted and still no show, only the basic 2 x 1gig sticks in top riser.
The whole 6 gigs used to show up.?
any ideas guys.
specs-
Macpro 3.0ghz Early 08 10.5.7 FCP 6.0.6, 6gig Ram
Cheers
Tom K

Hi Tom,
Ok, you've reseated the RAM, but have reseated them in different slots?
After doing that you might try this (in one or more of it's forms):
http://support.apple.com/kb/HT1806
Lastly, if it's still under Applecare, give Apple a call. There should be no trouble at all getting new RAM.
Good Luck.
Edit: And here's a PDF I linked to earlier tonight in another topic. Talks about and shows the memory configs pretty plainly:
http://manuals.info.apple.com/enUS/Mac_Pro_Early2009_Memory_DIMMDIY.pdf
Message was edited by: Samsara

SR12 camera suddenly not recognised

Similar Messages

Maybe you are looking for