SRM 3.0 integration with XI 3.0 for Supplier enablement scenario

Hi,
Iam trying to integrate SRM 3.0 with <b>XI 3.0</b> for Supplier Enablement Scenario. Can anyone please help me with the documentation for the same? I have downloaded documentation for SRM from service.sap.com/ibc but it contains steps only for XI 2.0.
Does anyone have the steps for XI 3.0?
Thanks and Regards,
Manish

Vadim
We are looking to integrate SRM 4.0 with R/3 ( ECC 5.0 ) using XI 3.0. I went to service marketplace to look for XI process content for SRM 4.0 - I could find XI content for SRM 2.0 only.
1) Do you know where SAP pre-delivered XI 3.0 process content can be downloaded from ?
2) Would you be having the cookbooks- possibly for all scenarios for SRM 4.0
If you could forward /give pointers to the above , I would appreciate your help. My yahoo id is [email protected]
Thanks for your help in advance.

Similar Messages

Coherence integration with oracle weblogic portal for Session management

Could you please let me know how to configure coherence integration with oracle weblogic portal for Session management. Its very urgent. please help.

Please take a look at the following web page -
http://coherence.oracle.com/display/COH35UG/Coherence*Web+Session+Management+Module
-Luk

Excel integration with Entry and Approval for SSM not working

Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
-          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
-          The browser security is definitely set to accept all active X scripts
-          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
-          Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!

Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob

Is ASA integration with ISE and RSA for 2 factor authentication a valid/tested design

Hi,
Customer currently uses ASA to directly integrate with RSA kind of solution to provide 2 factor authentication mechanism for VPN user access. We're considering to introduce ISE to this picture, and to offload posture analysis from ASA to ISE. And the flow we're thinking is to have ASA interface to ISE and ISE interface to RSA and AD backend infrastructure. And we still need the 2 factor authentication to work, i.e., customer gets a SMS code in addition to its login username and password. I'm wondering if ASA/ISE/RSA/AD integrated solution (and with 2 factor authentication to work) is a tested solution or Cisco validate design? Any potential issue may break the flow?
Thanks in advance for any input!
Tina

Hi,
I have an update for this quite broad question.
I have now came a bit further on the path.
Now the needed Radius Access Attribute are available in ISE after adding them in
"Policy Elements" -> "Dictionaris" -> "System" -> "Radius" -> "Cisco-VPN3000".
I added both the attribute 146 Tunnel-Group-Name which I realy need to achive what I want(select diffrent OTP-backends depending on Tunnel Group in ASA) and the other new attribute 150 Client-Type which could be intresting to look at as well.
Here the "Diagnostics Tools" -> "Generel tools" -> "TCP Dump" and Wireshare helped me understand how this worked.
With that I could really see the attributes in the radius access requests going in to the ASA.
Now looking at a request in "Radius Authentication details" I have
Other Attributes:
ConfigVersionId=29,Device Port=1025,DestinationPort=1812,RadiusPacketType=AccessRequest,Protocol=Radius,CVPN3000/ASA/PIX7.x-Tunnel-Group-Name=SMHI-TG-RA-ISESMS,CVPN3000/ASA/PIX7.x-Client-Type=,CPMSessionID=ac100865000006294FD60A7F,.....
Ok, the tunnel group name attribute seems to be understood correct, but Client-Type just say =, no value for that.
That is strange, I must have defined that wrong(?), but lets leave that for now, I do not really need it for the moment being.
So now when I have this Tunnel-Group-Name attribute available I want to use it in my Rule-Based Authentication Policy.
Problem now is that as soon as I in an expression add a criteria containing Cisco-VPN3000:CVPN3000/ASA/PIX7.x-Tunnel-Group-Name matches .* (just anything), then that row does not match any more. It still work matching against NAS-IP and other attributes.
What could it be I have missed?
Best regards
/Mattias

Cost center integration with HR - logical system for CRT inconsistent

Hi there,
we are distributing Cost centers from our SAP ERP system to another SAP HR system via ALE [COSMAS01 basic type].
The cost center created in target system contains information about source system logical system name - table CSKS, field LOGSYSTEM.
This is causing problems in Travel Managment in SAP HR system, where we get the error: Logical system for CTR inconsistent.
Cost centers created/changed in HR system does not contain any value in CSKS-LOGSYSTEM field and work fine.
Any ideas how to solve this issue?
For now to fix the issue, user needs to do a phony change in SAP HR system to get rid of original LOGSYSTEM value.
I am thinking about removing field E1CSKSM-LOGSYSTEM from COSMAS IDoc but I gues there must be simpler soloution.
Thanks for your advices,
Igor

Igor :
I think this has something to do with matching logical system with controlling area in TKA01. Another option for cc's logical system to have no values when outbound ALE is to config V_TKA01_ALE (so it will be transported to the system that has cc ALE to other systems) to have field 'ALE Distribution Method' blank (No distribution to other system).
This way, when SAP is creating outbound idoc for COSMAS, field CSKS-logicalsystem will not be populated (logic is in SAP 'MASTERIDOC_CREATE_COSMAS' , around line 86).
Rgds.

E-Business Suite Integration with Oracle Identity Federation for SAML

Has anyone developed a way to use OIF for e-Business Suite authentication through SAML rather than using the standard Identity Management stack of apps?
Today we have Oracle e-Business Suite 115.10.2 using OSSO through OID with WNA for zero sign-on (no login, just pass-through, based on AD credentials). Our domain controllers are Windows 2003 but we are in the process of upgrading them to Windows 2008 R2, where the OSSO stack is not supported unless we globally set the 2008 R2 domain controllers to use DES encryption instead of the default AES encryption. (See Oracle note 1076018.1)
When deploying OSSO, we encountered a similar issue with Windows 7 workstations would not work with OSSO unless we set the workstation policy not to use AES encryption. (See Oracle note 973190.1)
We are not inclined to continue to use DES encryption and we have obstacles moving to 11g iDM/OAM/OID from OSSO. I am exploring the possibility continuing to keep one 2003 domain controller in production, and pointing OSSO to that, until we can move to the 11g iDM stack.
Meanwhile, we have ongoing frustration with how complicated SSO is with the e-Business Suite. Sure, it works, once you climb the mountain to set it up, and we don't have that many issues in production. But the implementation of SSO for e-Business Suite is simply complex. The trip from the workstation back to an EBS session is operationally somewhat brittle. I guess some of us relish complexity. Certainly there is pride in understanding something like this. But, after a while, when the trickle of tickets from the Help Desk never completely dries up, you get tired of complexity and you seek something simpler.
So, instead of this path:
Workstation > EBS > OID > AD / Kerberos > Workstation
(and I didn't even mention F5 switch with reverse proxy servers ...)
Why can't we have this?
Workstation with certificate > OIF with SAML > EBS session.
Has anyone done that?
Thank you for your help.

Hello JJ,
We are facing the same issue. Oracle has recommanded us to install
HTML-DB on the same database as our Apps 11i.
What we still have to figure out is whether is use APPS schema for the
HTML-DB workspaces, or use a different schema.
How is it configured at your site?
Moshe

SAP integration with bio matrics devices for HCM master record

Hi Experts,
Do we have the option of using Bio Martix with HCM Master data unlike photo
Regards,
Masoom Ali

Sasikanth,
Usually before you switch UME to AD, you would read it with an LDAP web compliant browser, to check if you could access your OU, Group, and Users. Are you sure you can read the complete LDAP structure on AD?
Kindly re-check the process, to see if you missed out on any steps.
http://help.sap.com/saphelp_erp2004/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
Check note 772620 - UME 4.0: Create Groups on Microsoft Active Directory Server
Regards,
James

ADF11g - integration with OIM -folder structure for OIM configuration files

Hi All,
I'm trying to make call to a remote OIM using OIM API, from my ADF backing bean onclick of a button
on the JSPX page.
I'm able to compile the page, but the issues I'm facing is that I'm not able to read the configuration details
specified for OIM connectivity from the OIM configuration files (authwl.conf, xl.policy, xlconfig.xml).
So do any one know what is going to be the folder structure for these config files (OIM), when we are integrating to
this API from ADF backing bean.
Thanks All .
Thanks & Regards,
Dharmathej M

Hi Daniel, thanks for the response but i readed that doc before asking here and that's one of the reasons of my question.
On the first line of the doc it says *"This appendix includes instructions that describe how to configure WebSphere so that Oracle Identity Manager (OIM) and Oracle Identity Analytics (OIA) can be installed on separate servers."*
It assumes both products are on different servers and also the creation of an new profile and node for oia.
WAS_NDS_HOME/AppServer/bin/manageprofiles.sh -create*
-templatePath WAS_NDS_HOME/AppServer/profileTemplates/managed*
-profileName oia-managed01 -profilePath WAS_NDS_HOME/profiles/oia-managed01*
-nodeName oia-managed01-node01 -hostname hostname*
Integrate the OIA node to the OIM Cell by typing the following command on the OIA Machine:*
cd OIM_HOME/xellerate/setup; ./xlAddNode.sh oia-managed01 oia-managed01-node01 192.168.21.9 8883 xelsysadm password1*
Our intention is to use same machines, servers,... oim is using so we don't need to use extra machines or create extra websphere objects.
Any tips on that?
Regards.

Computer Telephone integration with CRM

Hi ,
We have a requirement to integrate existing Interactive Voice Response system,Computer Telephone Integration and Automatic Call Distribution with proposed SAP CRM. In order to integrate them we would like to use third party adapters from companies like AMT,SIEMENS,Genesys etc..
1. Does any one has experience in integrating these tools ?
2. Or is there any other better approach for the integration with CRM?
Thanks for your time.
Sunil

Hi Tony-
I am vinod, working in Accenture, India. I am a genesys engineer, have little knowledge of SAP CRM.
We made a successfull RFC connection to gplus in sm59, then i tried to create a telephony server in sphb, but this connection test failed. Am i going in the right path, or is there any other way to do this.
Is maintaining telephony server in SPHB mandatory or is there a similar setting in CIC0 configuration?
Can you please let me know how this can be done. Please provide me if you have any documents on this.
Thanks in advance

Outlook Express Integration with SAP Business workflow

Hi,
There is a user requirement for Outlook Express Integration with SAP Business workflow for PR approvals.
They want a link to be put in there outlook inbox so that the approvers can directly release the PR's worklist without seperately login into the SAP system. We are using 4.7 version.
I went through some ABAP material where i came across T-Code SCOT and Program RSWUWFML to schedule a job to pull worklists. But Iam not sure about this.
I want to know that whether this is possible in first place and if it is then how can we do it.
Regards
Vivek Nair

Hi ,
Thanks for the link..
but its not the one I have been looking for ragarding the mentioned scenario.
!)A User will be present in both outlook express and SAP system ,when we add a security group (SG *) in outlook expressthe user will get authorization on Portal screen.
2) After assigning a role in R/3 ,we should add the security group to that use for some access permission.
Could u pls explain me how the concept could be and Integration method.
Thanks in advance
I appreciate all your help.

How to create the integration with webmethods from portals

Hi Experts,
I got a requirement to integrate the webmethods system from my portal server.....
If anybody have documents kindly circulate the same to [email protected]
Higher points will be rewarded for the each useful inputs....
Thanks In Advance,
Jasmine

HI jasmine,
For integrating webmethods you can use application integrator iViews.
For Step-By-Step Guide to implement Application Integrator
refre this weblog.
Re: Integration with Java applications
And for Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
refre this weblog
Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
And for refrence use this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/70/5a3842134bad04e10000000a1550b0/frameset.htm
PS: If helpful award points
--Deepak.

Forte Integration with AS/400

Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

You can also investigate using IBMs MQ Series. Other message oriented
middleware may also have AS/400 ports available (such as Tuxedo).
-J
Mike Burke wrote:
>
Could you please provide some more information on what you plan to do
here? Are you looking to just pull data from the AS/400? Will you be
sending data back to the AS/400?
The AS/400 has supported Berkley Sockets; since, Release V3R1. Your
best bet for now is probably to use Forte's ExternalConnection class to
communicate with a C socket provider/consumer on the AS/400 side.
Please see Forte's "Integrating With External Systems" manual for
further information on the ExternalConnection class.
Also, I heard a couple of months ago that IBM plans to incorporate a
fully compliant CORBA ORB in a future release of OS/400. I haven't
heard if they have followed through on this. If so, CORBA would provide
another means for you to communicate with your AS/400 from Forte.
- Michael R. Burke
Born Information Services
e-mail: [email protected]
-----Original Message-----
From: Wei Suen Lai [SMTP:[email protected]]
Sent: Thursday, June 11, 1998 5:29 AM
To: Forte User Group
Subject: Forte Integration with AS/400
Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really
urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>--
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
http://www.sageit.com
-----------------------------------------------------

PS Integration with IM

Hello Experts,
Can U please tell me How PS is Integrated with IM and vice versa.And Is there any configuration similarities between the two?
Thanks & Regards,
Ankur

Hi,
PS integration with IM is required for Investment Projects.
Investment Managent integrates for creartion of Asset Master data. The Project Costs are settled to Asset.
IM has great capabiltiy when you go for Higher Level Budgeting i.e Budget is allocated one level up of Project.
Budget is allocated to Investment Programs and then distributed further to Projects.
Mulitiple Projects can be assigned to one Investment Program for a Financial year.
Apart from this it also serves as good reporting for MIS.
You can also use Appropriation request when your Project is in Approval Stage.
Hope this helps you in understanding.
Regards,
Nitin

Sales Order Integration with e-Commerce Solution Venda

To all you gurus out there
My client is implementing the e-commerce solution Venda to process Credit Card Sales.
In all the posts and information I have read, there is a) integration required between the e-commerce solution
Q1 - Is the integration between e Commerce to ERP SD?
Q2 - The integration will create a Sales Order in SD with Credit Card Processing information? I will need to configure the Credit Card Processing in ERP?
Q3 - My client wants to collect the credit card payment from the Customer at the time of order placement and not at time of delivery. This creates the problem of how the pre-payment posting is created at time of Sales Order create.
Has anyone encountered this requirement and how was this resolved?
Any insight would be greatly appreciated.

Lauren
I don't have experience with Venda, but I have worked on SAP CRM internet sales and home grown E commerce solutions, hence feel qualified to answer you.
Q1 - Is the integration between e Commerce to ERP SD?
Ans: Yes. Because orders created in the E commerce stores pass to ERP via Middleware and hence both ERP and Ecommerce should have common master data ( customers, Materials, Pricing) and configuration, esp. Pricing procedures, partner functions, Availability/credit checks should be similar,
Q2 - The integration will create a Sales Order in SD with Credit Card Processing information? I will need to configure the Credit Card Processing in ERP?
Ans: Customers will create orders on your E-commerce site (Stores). You can capture and validate the credit card and get authorization from clearing center etc. on the web itself. Alternately you may just collect the credit card info from the customer and pass it along with the order to SAP where it will get validated/authorized. However the order will come over to ERP with credit card info and get fulfilled there. So you need to configure ERP for credit card processing. Especially here: SPRO/IMG/Sales and Distribution/Billing/Payment Cards and also in credit and Riskmanagement (Forms Of Payment Guarantee).
Also I am not sure Venda takes care of Credit card processing with your bank/clearing house. Usually there will be one more vendor/software and integration with that is needed for both ERP as well as E commerce software (Venda).
Q3 - My client wants to collect the credit card payment from the Customer at the time of order placement and not at time of delivery. This creates the problem of how the pre-payment posting is created at time of Sales Order create.
Ans: This is standard process and both SAP and your credit card processing software I talked about will be fully geared to do this. What happens is that a pre-authorization is take at the time of order and it will be checked again at Delivery for validity and so on.
Go through this documentation:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a6/b1853478616434e10000009b38f83b/frameset.htm
Hope this helps. Let me know.

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

SRM 3.0 integration with XI 3.0 for Supplier enablement scenario

Similar Messages

Maybe you are looking for