SRM 7.0 RFx: Supplier not able to reply to Header level questions

Hi Gurus
I am currently working on SRM 7.0. I am facing a strange issue.
While creating an RFX I am able to create questions as both item level and header level and able to assign weights to the same.  I am also able to  see questions along with weights at the supplier's end however when I try to create bid it shows weights at header level questions as zero and the supplier response to the question is also not accepted.
For questions at item level it is just working fine.
Please suggest what could be wrong. waiting for your replies.
Sohil

Daniele,
it could be due to multiple purchasing org. assignment to the suppliers.
Regards
Konstantin

Similar Messages

  • Not able to reply or answer to questions asked

    when i try to reply to any questions i get this message An error occurred while trying to submit your post. Please try again. i tried logging out and logging in but still no use. Its been 30min now but im still not able to reply to any questions asked

    hi user,
    here also same. i posted the same.
    but the message is somewhat different https://forums.oracle.com/thread/2563659

  • Not able to find out invoice level for customer collection

    Hi Experts,
    We are not able to find out  invoice level payment details for the collection
    They are provided collection amount and reference no, but here problem is customer have more than 20 company codes and they cleared in multiple co.codes , also user not maintained any reference while clearing the invoice, so we only able to find out the collection amount but we dont know for which invoice it is cleared.
    can any one help us,

    The given link take to the window where CPU patch for all the quarter available.
    The Critical Patch Updates released to date are listed in the following table.
    Critical Patch Update Latest Version/Date
    Critical Patch Update - October 2012 Rev 1, 16 October 2012
    Critical Patch Update - July 2012 Rev 1, 17 July 2012
    Critical Patch Update - April 2012 Rev 2, 19 July 2012
    If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
    There for the database products it shows the below option.
    Table 9 Patch Availability for Oracle Database 11.2.0.3
    +*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
    It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
    Thanks
    SHIYAS M

  • Not able to reply questions -- still not able to reply

    dear team,
                still i am not able to reply kindly help

    What exactly is happening when you try to reply? Are you getting errors?
    If you're able to post a screenshot of the issue, please do so. If you're not, please describe the situation in as much detail as possible.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Not able to reply questions

    dear team,
                     i am not able to reply any questions. kindly help

    If you find that you can't reply, perhaps the best way to let us know will be by creating a new thread over in the sandbox:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=tnsandbox&filter=alltypes&sort=lastpostdesc
    EDIT: For anyone else reading this thread, the OP still could not reply. I've suggested contacting fissues directly.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Migo is not showing the excise tab - header level and item level

    Hi,
    i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.

    Hi,
    There are two kinds of statuses, system status and user status.
    You can only influence System status if you execute a business transaction that changes the system status.there
    are four system statuses open, In process,Released and Completed.
    User status can be created as additional information to the system status in any numbers.But for this you
    need to define a status profile which would further be assigned to transaction type(header status) and
    item categories(item status).
    The header status is independent of the item status. One exception is the status Completed.
    If all items have the status Completed, the header status is also set to Completed.
    For defining a status profile you need to go to
    SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
    Hope this helps.
    Regards
    Sidd

  • Not able to get rid of a Question mark in the Dock

    A friend got stuck with a Question Mark in the Dock of his 4 year old iMac that was linked to an app not compatible anymore with his latest 10.8.2 version ( guess it was a Power PC app, before Mountain Lion, he was still on Leopard ). He apparently deleted the app and some dependencies manually ( instead of using App Cleaner & Co. ) and now whenever he is hovering over that Question Mark, even before being even able to pull it out from the Dock, the screen flashes up white and the Finder resets.
    Is there a way to access the Dock through an element of his user library to get rid of that Mark, or even through a Terminal command ( not that I like to delve in there, but Terminal commands have helped me personally quite often ) ?
    Does the Dock have a dedicated place in the Library's User Folder ? Couldn't find anything on my own Mac.
    Thanks for any clue ....

    Right clicking on it is not even an option, just hovering over it seems to induce a "nuclear" reset of the whole desktop and graphic card on the iMac.
    Have meanwhile found a possible solution by erasing the dock preference file in the user/library/preferences folder to reset the dock to it's default state. Will try this out through a Skype conversation with that Buddy.
    Was seen here :
    https://discussions.apple.com/message/16447109#16447109
    Thank you for stepping in. Good to know that people are still willing to help in this community.
    Greetz to the UK from France

  • Non Active Directory users are not able to access sharepoint top level site

    I have created a sharepoint group with read permission on top level site and I added the NON AD users to that group but the non ad users are unable to access top level site ,they are able to access remaining all subsites without any issue.I am facing
    this issue only with NON AD users....I have checked the page layouts , all the layouts are  in published mode.All the webparts and Lists on Default.aspx page has all users access permissions.Do I need to change anything in central administration
    for this webapplication.

    Hi,
    Could you please reproduce the issue and collect error information in ULS log for troubleshooting?
    For your convenience:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Not able to fetch the item level rating for the document programatically in sharepoint 2013

    Hi,
    I am trying to get the current logged in user rating for items in document libraries . However. It is giving rating as 0 for the all the documents. I am using below code
     SPSite site = new SPSite(SPContext.Current.Web.Url);
                        SPWeb web = site.OpenWeb();
      string fileUri = "http://svdvspapp01:2015/" + webUrlSplit;
                                Uri urifileUrl = new Uri(fileUri);
                               SPServiceContext context = SPServiceContext.GetContext(site);
                                SocialRatingManager mySocialRatingManager = new SocialRatingManager(context);
                                SocialRating aRating = mySocialRatingManager.GetRating(urifileUrl);
                                string myRating = aRating.Url + ": " + aRating.Rating;                       
                                objtopRated.myRating = myRating; } }In the above code fileUri is the docuemnt url of the item in doc libraryeg. http://svdvspapp01:2015/ProductsandPricing/Pricing/Pricing_Document 1.xlsxI refrred the below msdn linkhttp://msdn.microsoft.com/en-us/library/ff407954.aspx

    Hi Labhesh,
    I understand that you want to search the date field in the document library inline search.
    I recommend to use the managed property for the dates column in the query.
    For example, if the managed property for the date column is called testdate, then type “testdate:2014-11-28” in the search box in the library for searching the date.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Not able to login with privilege levels

    Hi,
       i have created privilege levels in cisco switch especially level 7 if i login with that username and password ,after typing privilege mode password it is going to level 15.... what is the problem ........
    commnads i configured is :
    # username cisco level 7 password cisco
    #enable secret cisco
    ............please help me where i have gone wrong

    Hi, What model/IOS version that you use?
    Rating useful replies is more useful than saying "Thank you"

  • Expense Report not routed to Prepay Auditor when PrePay Auditor is setup at header level

    Expense Report not routed to Prepay Auditor when PrePay Auditor is setup at header level, I have attached screenshots of my setup.
    ER is routed correctly if PrePay Auditor is setup at line level.
    Why am I not able to route to header level approval stage?
    I am on Peoplesoft 9.2 Image 10.
    Thanks,
    Jyothsna

    Well, I found something that worked for me.
    I found a blog post by Ryan Nielsen and it included these instructions:
    Original Post
    Article Text:
    Reporting Services - Unable to Connect to Remote Server Error After a restart reporting services, you may come up with Unable to Connect to Remote Server Error when navigating to the web access. Typically an issue like this occurs in the RSWebApplication.config. This file is located in the ReportManager Folder (Example: C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportManager) I checked the <reportserverurl> and <reportservervirtualdirectory> tags were the same as before.
    <ReportServerUrl></ReportServerUrl>
    <ReportServerVirtualDirectory>ReportServer</ReportServerVirtualDirectory>
    <ReportBuilderTrustLevel>FullTrust</ReportBuilderTrustLevel>
    After changing the ReportServerUrl tag to contain both the server URL and the virtual directory, it could then connect to the remote server.
    <ReportServerUrl>http://Server/ReportServer/</ReportServerUrl>
    <ReportServerVirtualDirectory></ReportServerVirtualDirectory>
    <ReportBuilderTrustLevel>FullTrust</ReportBuilderTrustLevel>
    No IP addresses were added or was any IIS settings that I could tell. Leaving the ReportServerUrl tag blank should allow for it to find the server locally.
    End Article Text
    I did this and restarted the Reporting Services service and it now works without a problem.
    I hope this helps someone.
    JB

  • Supplier Note gets copied from Catalog Item to Non-Catalog Item

    Hi All,
    The basic issue is that when we create a mixed shopping cart, cart with Catalog and Non-Catalog Items (Made using Describe Requirement link), the Supplier Note (in the Documents and Attachments part ) from the Catalog Item gets copied to the Non-Catalog Item directly when we create the Non-Catalog Item.
    We face the issue only when the first Item is a Catalog Item. ...
    There are no custom developments for the Supplier Note and we do not modify it directly in any other way. Any Ideas .. ?
    Thanks and Best Regards,
    Sagar Ogale

    Hi Bharath,
    The issue is that for the Non-catalog ( Item created using Describe Requirement ) in SRM 5.0, the supplier note field is getting populated by default. This is the issue.
    The Supplier's Note should remain blank. But, its not... This is the issue. Do you have any ideas what may be causing the issue..?
    Thanks and Best Regards,
    Sagar Ogale

  • Not able to Pass header info to Microsoft MapPoint WebService using WLS10

    We are passing some Header info to the MapPoint Web Service from our client Web Service which is hosted in Weblogic 10, however we are not sure if the info is getting passed.
    The actual soap header which we are trying to postis as below:
    <env:Header xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
    <m:CustomerInfoFindHeader xmlns:m="http://s.mappoint.net/mappoint-30/">
    <m:CustomLogEntry>2</m:CustomLogEntry>
    </m:CustomerInfoFindHeader>
    </env:Header>
    We are using the below code snippet for setting the header:
    Document doc = null;
    try
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    factory.setNamespaceAware(true);
    doc = factory.newDocumentBuilder().newDocument();
    catch(ParserConfigurationException pce)
    System.out.println("ERROR -> " + pce.getMessage());
    Element header = doc.createElementNS("http://schemas.xmlsoap.org/soap/envelope/", "SOAP-ENV:Header");
    Element headerContent = doc.createElementNS("http://s.mappoint.net/mappoint-30/","m:CustomerInfoFindHeader");
    Element headerChildContent = doc.createElementNS("http://s.mappoint.net/mappoint-30/", "m:CustomLogEntry");
    headerChildContent.appendChild(doc.createTextNode("2"));
    headerContent.appendChild(headerChildContent);
    header.appendChild(headerContent);
    Attr nsAttr = doc.createAttributeNS("http://www.w3.org/2000/xmlns/","xmlns:m");
    nsAttr.setValue("http://s.mappoint.net/mappoint-30/");
    headerContent.setAttributeNodeNS(nsAttr);
    findServiceControl.setOutputHeaders(new Element[] {header});
    Here findServiceControl is the Service Control object.
    Even if the code is not throwing any error/exception I am not able to see the header portion which invoking the Mappoint Web Service (using the weblogic test client for testing the webservice).
    Is there any other methodology for setting the header.
    Regards
    Sanjeev Singh

    If you're not sure the header is being created properly, you should switch to using a javax.xml.transform.stream.StreamSource and javax.xml.transform.dom.DOMResult. For instance:
    import java.io.ByteArrayInputStream;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.dom.DOMResult;
    import javax.xml.transform.stream.StreamSource;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    StringBuffer xml = new StringBuffer()
    .append("<env:Header ")
    .append("xmlns:env=\"http://schemas.xmlsoap.org/soap/envelope/\">")
    .append("<m:CustomerInfoFindHeader xmlns:m=\"http://s.mappoint.net/mappoint-30/\">")
    .append("<m:CustomLogEntry>2</m:CustomLogEntry>")
    .append("</m:CustomerInfoFindHeader>")
    .append("</env:Header>);
    TransformerFactory xformFactory = TransformerFactory.newInstance();
    Transformer transformer = xformFactory.newTransformer();
    ByteArrayInputStream bais = new ByteArrayInputStream(xml.toString().getBytes());
    DOMResult result = new DOMResult();
    transformer.transform(new StreamSource(bais), result);
    Document document = (Document)result.getNode();
    findServiceControl.setOutputHeaders(new Element[] {document.getDocumentElement()});
    If you want to see the SOAP request being sent to the Mappoint Web Service, add the following to the JAVA_OPTIONS environment variable (in the startWebLogic.cmd file), and bounce it:
    -Dweblogic.wsee.verbose=*
    -Dweblogic.log.RedirectStdoutToServerLogEnabled=true
    This will write the SOAP request (and SOAP response) to the server log of the WebLogic Server instance, which the service control is running in.

  • Iphone is not detecting network after updating, i m not able to configure it

    my iphone is not detecting network after updating, i m not able to configure it

    To answer your question there, are you unable to connect to cellular internet (using a SIM or WiFi?

  • I am Not able to See "rescue security question" link. HELP

    Hello Support,
    My account ******** i am not able to see rescue my security question link. what i do now? how i rescue my security question??
    Please Help
    Thank you
    <Personal Information Edited by Host>

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) on your account. If you aren't getting the link then you don't have a rescue email address, and you won't be able to add one until you can answer your questions - you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use steps 1 to 7 half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Maybe you are looking for

  • My own music and iCloud

    I make music and put the tracks straight onto iTunes. Will they transfer to iCloud in the same way or will they not go on? Thanks for any help in advance!

  • How to update indesign cs5.5 to cs6?????

    I have cs5.5 installed already, but I need cs6. How do I update? How come adobe never updates my software?

  • HP Pro3330 Micro Tower Graphic Card Driver Error Pls Help ~

    (1) HP Pro3330 MicroTower (2) Product No D3V03PA#UUF Downgrade to Windows 7 Professional 32bit I Download Grahpic Driver on This : Intel Graphics Driver (32-bit) sp54268.exe But after i extract and run install , keep showing me this error This Comput

  • Exe with Application Builder

    "Can Application Builder build *one executable* which consists of a constantly running instrument VI and a VI which is periodically executed from a remote host through the Labview HTTP Server. Both of which normally share data through a global variab

  • Automator Actions for Pages

    I just checked in Automator, and I can't find a single Pages Automator action. With how useful it could be I can't fathom why there wouldn't be some built in.