SRM 7.0 - Unable / How to get into DEBUGGING mode in BADI

Hello SAPions,
I am unable to get into debugging mode from WebDynpro Portal screen to R/3 BADI in SRM 7.0 .
I placed a breakpoint in the BADI, and logged into the portal screen.
However, in SRM5.0, to get into debugging mode from ITS, we place a break point in the BADI, when we browse the ITS link from the IE browser, we will be able to get into debuggin mode.
Any other way ?
Regards,
Ashwin.

Hello,
Please check the following:
1. Application server name, the SAP GUI and the portal should be logged into the same application server.
2. You should be logged in with the same User in both SAP GUI and the Portal.
3. External debugging should be enabled for the User in SAP GUI.
4. Also try checking the check box , IP Matching . This can be done as below:
Utilities -> Settings -> ABAP Editor -> Debugging -> IP Matching.
Also please check the following in the above link , if you have the same user name here with which you have logged onto Portal and the New Debugger Radio Button is Selected.
Hope this helps.
Best Regards,
Sapna

Similar Messages

How to get into Safe Mode (win7)

I have a user who installed Windows 7 on his Mac (natively). He now has a virus - which means he needs to run his AV software in SAFE MODE (running a scan in normal mode is usually a waste of time).
But.... how in the heck do I get his computer to boot into Safe Mode? On a PC, I would hit F8 at the Bios screen. But the Mac Bios is completely different.
Or will hitting F8 still work?

EFI is still a 'basic IO system' and while you can't booted into EFI setup screen, you can do Safe Mode. All computers have to bootstrap the system and have basic firmware supported method. UEFI will though have a harder time be adopted - though support for booting from GPT and 2.1TB volumes may force it.
For AV, I would strongly recommend Microsoft Security Essentials, free and darn good which was updated yesterday.
Microsoft Security Essentials
http://www.microsoft.com/security_essentials/
MS Malware Protection Center
http://www.microsoft.com/security/portal/
http://www.malwarebytes.org/
http://www.superantispyware.com/
Malware News - very busy this year and esp. lately
http://www.zdnet.com/blog/security

Can't figure out how to get into "Reader Mode."

The little book icon just won't appear in the title bar no matter what I do. Tap, long press, double tap, etc. What did I do to cause this and how to get out of it? Moto X, Android 4.4. Thanks.

Thanks, Guigs2. I still have more or less the same problem whether "Auto rotate screen" is enabled or not: the little book icon appears in the address bar for some pages and not for others. Example: home page of NY Times shows no icon, but go to any news article you like and the icon will appear just fine. Washington Post works the same way.
I have no addons, BTW.

How to get into recovery mode from a "dead"(turned itself off) iphone 3g?

my iphone 3g died yesterday(bacame greyer and greyer untill it turned off) and since then i can't get it to turn on or connect to iTunes.
#my iphone's power button is broken.

Alongg4 wrote:
#my iphone's power button is broken.
Then you are out of luck.
Take the device to Apple for an Out of Warranty replacement or find a local repair shop. Without a functioning power button it is impossible to determine if the issue is the battery or something else.

How to get into your ipad if you forgot your password

How to get into your ipad mini if you forgot your password

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

How to get into my iPhone5 if I have forgotten my password, How to get into my iPhone5 if I have forgotten my password

How to get into my phone if I forgot my password

LOST PASSCODE
You should be able to remove the passcode by restoring the device.
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
Right-click the device in the left column and select Back up.
When the backup is complete, select Restore.
When finished, restore from your most recent backup.
Otherwise read this
If that doesn’t work you will need to perform a factory restore to remove it. Or read:
Enter Wrong passcode
http://support.apple.com/kb/ht1212

How to get into BIOS in Windows 8

my question is this will the same fan control software that was on windows seven 64 bit lenova work with windows 8 and 8.1 just wondering if i have to uninstall before i upgrade or will it be compatable with 8 and 8.1 upgrade hope someone can steer me in the right direction here it would be appreciated-thanks

Hi,
follow the links below:
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p/...
http://support.lenovo.com/en_US/detail.page?DocID=HT076607
win8 should be installed on the big HDD.
If you have enough computing skills Win8.1 Update could be installed on the small SSD using the new feature - WimBOOT.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

My iPhone was stolen. How do I retrieve the pictures etc that were on imt. I know they must be in the iCloud but I don't know how to get into it from my iPad. Also, I would like to try to locate the phone ...how do I do that from my iPad?

My iPhone was stolen. How do I retrieve the pictures etc that were on imt. I know they must be in the iCloud but I don't know how to get into it from my iPad. Also, I would like to try to locate the phone ...how do I do that from my iPad?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
 Cheers, Tom

Quick doubt.. from cursor vairable how to get into page vairable

Hello
i am creating an apex page where i have 2 regions. From the Top region stores all fields entered into the bottom region
Text fields like first name and last name and address fields are in region 2(bottom).After region 2, i have a add person button.
Once i click add person, that person will get into top i.e region 1.
Now, Region 1 got person1 first name ,last name
person2, first name,last name
etc..
I am not able to display like p1_first_name,p1_laast_name as the list is not stable..it is growing and not showing the person who already got saved..I can retrieve them from DB using a cursor..But from cursor vairable how to get into page vairable..
appreciate ur help..
kp

Your explanation is not good enough. You have to make a better description of your problem or create an example at apex.oracle.com.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Satellite 2540xcdt: How to get into the BIOS

Hi there,
I've just bought one of the above computers and would like to know how to get into the bios before it boots up to the OS,
anybody out there have any ideas?
Many thanks
F

Hi
Pres ESC button just after starting the unit and keep it down for a short time.
Bye

How to get into desktop screen at once when client come into RDP session?

How to get into desktop screen at once when client come into RDP session?
When users login into terminal server I would like they see own desktop and open web page of corp portal.
How to do that?

Hi
Hope below links will help
http://blog.cloud-client.info/2012/10/03/tip-configure-a-keyboard-shortcut-to-minimize-fullscreen-citrix-or-microsoft-rds-sessions-for-a-linux-based-igel-os/
Also there are some Remote Desktop Services shortcut keys
http://msdn.microsoft.com/en-us/library/aa383500%28v=vs.85%29.aspx
Regards,
Rajesh J S

I bought Downton Abbey on iTunes, but I have forgotten how to get into it.

I bought Downton Abbey on iTunes some time ago, but I have been traveling and have forgotten how to get into it?

I'm not sure what you mean by "get into it". If you downloaded the episodes, just launch iTunes, go to the TV Shows section, and play the episode you want to watch.
Otherwise, you'll need to explain your issue in more detail.
Regards.

Hi, I have a question, I would like to ask how to get into Photoshop CC 2014 English language? Thank you Dana

Hi, I have a question, I would like to ask how to get into Photoshop CC 2014 English language? Thank you Dana

First, download and install the Creative Cloud Desktop Manager if it is not in your computers Programs list since your are a CC member.
Free Creative Cloud | Download Adobe Creative Cloud free trial
Then launch it, click on Apps. Then from the menu, select Preferences.

How to get into SAP Career when having 10 year experience in sales?

Dear all,
Please suggest me how to get into SAP career, I have 10 year exp in sales specialized in Channel sales in consumer durable industry in India, Is there any scope for sales professional in SAP? I dont have any experience in SAP, but want to learn and get into SAP career.....how do I begin please suggest
Thanks

vapin,
Search for online training institutes on the net. Each of these gives a demo. By attending the demo make a selection of the institute.
On Youtube too, there are lots of SD training videos. Check those.
TW
Added: A good trainer will have the following:
1 - give business examples, to explain functionalities
e.g. intercompany sale process: the process from his experience, what are the key benefits to business etc.
IMP: Functional consultant is first about understanding the business process and second about configuration etc. in SAP
2 - patience
he should not be reluctant to answer your questions properly
he should sense how you are understanding the concepts, and take necessary actions
3 - mentor
what should be your next steps - how to prepare SD, how to prepare your resume, how to prepare for interviews etc. etc.
Message was edited by: TW Typewriter - added in blue

SRM 7.0 - Unable / How to get into DEBUGGING mode in BADI

Similar Messages

Maybe you are looking for