SRM - How to get data from tables???

Hi experts -
I am new to SRM and I have a requirement to code a program that will retrieve purchase orders based on selection criteria, write an ALV report and all the user to select particular lines to close the p.o.
My question is that with the following selection criteria, I see that there are tables such as CRMD_ORDERADM_H and CRMD_ORDERADM_I as well as BBP_PDBEH and BBP_PDBEI, but not exactly sure if I should do selects on them individually or can you collect the records from a function module or BAPI?
Selection criteria:
PO Number - range
Purchasing group - range
Vendor number - range
Buyer ID - range
Cost Center - range
GL Account - range
WBS - range
Asset - range
Plant - range
Company code - range
Delivery Date - range
PO Create Date - range
How can I pull the qualifying records in the easiest manner?
Thanks in advance!
Mark

I'm not certain about this, but I don't think the information you need is in the SRM frontend. I think you'll have to use an RFC enabled FM to retrieve the data from the R/3 backend to the SRM system. Or maybe there is a BAPI that does this for you.
Rob

Similar Messages

How to get data from table to pass into alvgrid function module

i want to get some data from below table to pass into function module of alvgrid
how can i get data please help.
thanks in advanced.
form get_data.
select * into corresponding fields of table itab
         from J_1IEXCHDR
                 inner join J_1IEXCDTL
                    on J_1IEXCDTLlifnr = J_1IEXCHDRlifnr
                 where J_1IEXCHDr~status = 'P'.
   append itab.
endform.

Pass your final table(internal table which you want to display) along with fieldcatalog to FM reuse_alv_grid_display.:\
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = i_repid
   IT_SORT               = gt_sort
      it_fieldcat        = lt_fieldcat[]
    TABLES
      t_outtab           = lt_final
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How to get data from three tables (A,B,C) having one to many relation between A and B .and having one to many reation between b and c

i have three tables A,B,C. there is one to many relation between A and B. and one to many relation existed between table b and c . how will get data from these three tables

check if this helps:
select * --you can always frame your column set
from tableA a
left join tableB b on a.aid=b.aid
left join tableC c on c.bid=b.bid
This is just a general query. However, we can help you a lot more, if you can post the DDL + sample data and required output.
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Getting data from table BSEG taking too long ... any solutions.

Hello people I am currently trying to get data from table BSEG for one particular G/L Account Number With restrictions using For All Entries.
The problem is that even with such tight restrictions its causing my report program to run way too slow. I put an option where you dont have to access table bseg. And it runs just fine. (all of this is done during PRD Server).
My question is
1.) How come BSEG seems to make the report slow, even though I put some tight restrictions. <b>Im using For All Entries where Zuonr eq i_tab-zuonr</b>it seems to work fine in DEV and <b>hkont EQ '0020103101'</b>(Customer Deposits).
2.) Is there a way for me to do the same thing as what I mentioned in #1 but only much faster.
Thanks guys and take care

Hi
It should be better you don't read BSEG table if you haven't the keys BUKRS and BELNR, because the reading could take many times if there are many hits.
If you want to find out the records of G/L Account it's better read the index table BSIS (for open items) and BSAS (for cleared items), here the field HKONT is a key (and ZUONR too). So you can improve the performance:
DATA: T_ITEMS LIKE STANDARD TABLE OF BSIS.
SELECT * FROM BSAS INTO TABLE T_ITEMS
FOR ALL ENTRIES I_ITAB WHERE BUKRS = <BUKRS>
                           AND HKONT = '0020103101'
                           AND ZUONR = I_ITAB-ZUONR.
SELECT * FROM BSIS APPENDING TABLE T_ITEMS
FOR ALL ENTRIES I_ITAB WHERE BUKRS = <BUKRS>
                           AND HKONT = '0020103101'
                           AND ZUONR = I_ITAB-ZUONR.
Remember every kind of item has an own index tables:
- BSIS/BSAS for G/L Account
- BSIK/BSAK for Vendor
- BSID/BSAD for Customer
These table have the same informations you can find out from BSEG and BKPF.
Max

How to retrieve data from table(BOM_ITEM)

Hi All,
I wrote webservices using axis1.4 to get BOM information from SAP.. funtional module is CAD_DISPLAY_BOM_WITH_SUB_ITEMS
webservices works fine..I'am able to retrieve data from Export Parameter..But not able to retrieve data from table
How to retrieve data from table(BOM_ITEM)..?
Cheers, all help would be greatly appreciated
Vijay

Hi,
1. Create Page Process.
2. Select Data Manipulation
3. In category select "Automated Row Fetch"
4. Specify process name, sequence, select "On Load - Before Header" in point.
5. Specify owner, table, primary key, and the primary key column(Item name contains primary key).
6. Create a process.
7. In each item select "Database Column" in "Source Type".
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

How to get data from a USB-UIRT device using Labview?

How to get data from a USB-UIRT device using Labview?
I'm trying to get data from a USB-UIRT device, is it posible with Labview?
I really appreciate your help,
thanks

You may want to contact the developer of the device for the API and DLL.
http://65.36.202.170/phpBB2/viewforum.php?f=3

How to get data from a table in a condition between twomonth

hai friends
I have a query that is i want to get data from a table based on a condition between two months in a format of char column
Ex
I have a column called from_month in the format of 'mon/yyyy'(already converted from date')
then the second column is to_month in the same format 'mon/yyyy'
now i wiil select from_month and to_month like
from month jan/2009
to month mar/2010
how to use between of two months in the format of char.Please tell me how to get two different month between data.

Hi,
This may be of help.
Remember Pointless has made a point ;) (worth millions)
If possible , DO NOT store dates as strings or numbers.Let dates be dates.
WITH dat AS
(SELECT ' THIS IS JAN' x,to_char(to_date('01-JAN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS FEB' x,to_char(to_date('01-FEB-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS MAR' x,to_char(to_date('01-MAR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS APR' x,to_char(to_date('01-APR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS MAY' x,to_char(to_date('01-MAY-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS JUN' x,to_char(to_date('01-JUN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS JUL' x,to_char(to_date('01-JUL-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS AUG' x,to_char(to_date('01-AUG-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS SEP' x,to_char(to_date('01-SEP-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS OCT' x,to_char(to_date('01-OCT-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS NOV' x,to_char(to_date('01-NOV-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual)
SELECT * FROM dat
WHERE to_date(y,'mon/yyyy') BETWEEN to_date('01 jan 2009','dd mon yyyy') AND to_date('01 mar 2009','dd mon yyyy')Cheers!!!
Bhushan

How to get data from crosstab or table?

hi !
i develop my app with bib 9.0.3.1 . To customize my report,i must get data from crosstab or table component (presentation bean) and generate defined XML file ,can you tell me how to do ?

hi paul
the sample code like this:
try{
     DataAccess dataAccess = thinDataview.getModel().getDataAccess();
int rowCount = dataAccess.getEdgeExtent(DataDirector.ROW_EDGE);
int colCount = dataAccess.getEdgeExtent( DataDirector.COLUMN_EDGE );
     for ( int i=0; i<rowCount; i++ )
     for( int j=0; j<colCount; j++ )
               String dataValue = dataAccess.getValue( i,j,DataMap.DATA_UNFORMATTED).toString();
}catch( Exception e ){
System.out.println( e.getMessage() );

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to get data from COSP table, field HRKFT as the key to data from PM?

Dear ladies and gentlemen!
I need to get data from COSP table, field HRKFT as the key to data from PM tables (AFKO and AUFK).
The problem is that it is a key field to the COSP, and all non-key fields as an alternative to HRKFT are not suitable for this task.
All this is necessary for the extractor, which loads the data from the R \ 3 systems in the BW-system. I need to perform SELECT from a table COSP and maybe also JOIN, most likely between tables COSP and AUFK.
What should I do in this case?
Thank you very much in advance!

From information on help.sap.com I've made a conclusion that one of possible solutions in theory is to modify standard extractor PM_OM_OPA_1 in order to make HRKFT field available for work, because by default it is hidden by SAP and not available for use as a key field.
Of course, it's not a very good solution, but for now I know no other way to solve this problem.
Maybe someone knows better ways? In this case I will be very grateful for any help!
Moderator: You'd better post it on BI forums

OC4J - How to get data from large table (more than 9 million rows) by EJB?

SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS
O I use Jdeveloper to create EJB that has finder methods to get data from a big table (more S than 9 million rows). Deploy is OK but when run client program I always get timeout
O error or not enough memory error,
S Can any one help me?
O urgent
SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS

Your problem may be that you are simply trying to load so many objects (found by your finder) that you are exceeding available memory. For example if each object is 100 bytes and you try to load 1,000,000 objects thats 100Mb of memory gone.
You could try increasing the amount of memory available to OC4J with the appropriate argument on the command line (or in the 10gAS console). For example to make 1Gb available to OC4J you would add the argument:
-Xmx1000m
Of course you need have this available as hard memory on your server or you will incur serious swapping.
Chris

How to get data from hierachy lookup table

there is a hierachy lookup table A, and I want to get data from A.
but the following code does work properly:
WebTreeNode result = catalog..GetHierarchy(tableName,nodeID);
could anybody give some suggestion or solution of getting data from hierachy lookup table,
3x

Hi fei,
Please look at the following code.
I hope it will give you some clues...
private void showHierarchy() throws StringException
    ResultSetDefinition rsd = new ResultSetDefinition(<code name of your hierarchy table>);
    rsd.GetFields().Add(<code name of a field in your hierarchy table>);
    Search search = new Search(<code name of your main table>);
    WebTreeNode treeNode = catalogData.GetResultTree(search, rsd, 0);
    printHierNameRecursive(treeNode, 0);
private void printHierNameRecursive(WebTreeNode root, int level) throws StringException
    WebTreeNodeArray arr = root.GetChildren();
    for (int i = 0; i < arr.GetSize(); i++)
        for (int tab = 0; tab < level; tab++)
        System.out.print("t");
        String catName = arr.GetWebTreeNodeAt(i).GetValueAt(<code name of a field in your hierarchy table>).GetStringValue();
        System.out.println(catName);
        printHierNameRecursive(arr.GetWebTreeNodeAt(i), level + 1);
Regards,
Nir

How to get data from large table (more than 9 million rows) by EJB?

I have a giant table, it has more than 9 million rows.
I want to use ejb finders method to get data from this table but always get not enough memory error or time out error,
Can anyone give me solutions?
Thx

Your problem may be that you are simply trying to load so many objects (found by your finder) that you are exceeding available memory. For example if each object is 100 bytes and you try to load 1,000,000 objects thats 100Mb of memory gone.
You could try increasing the amount of memory available to OC4J with the appropriate argument on the command line (or in the 10gAS console). For example to make 1Gb available to OC4J you would add the argument:
-Xmx1000m
Of course you need have this available as hard memory on your server or you will incur serious swapping.
Chris

How to get data from subsites list of SharePoint 2010 in ssrs

Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
Kishore

Hi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT

How to get data from a file?

Hello everyone, i'm new to this forum and to java too. Ok, so here is what i want to do:
I want to get data from a file containing words and numbers and store them into variables that i will use them after to insert into a database table. For example i have a file called employees.txt in this form:
eid ename zipcode Hire_date
1000 "Jones" 67226 "12-DEC-95"
In C++ i declare variables for each data and store them, for example in this case:
ifstream in("somefile");
string name, hdate;
int eid, zip;
in >> eid >> ename >> zip >> hdate;
So i want to do the same thing in JAVA but i can't make it work. So, i would appreciate if someone could give me a simple example how to do it. Thank you.

[http://java.sun.com/docs/books/tutorial/essential/io/index.html]

SRM - How to get data from tables???

Similar Messages

Maybe you are looking for