SRM-MDM 3.0 - prices for sales packages

Dear forum gurus,
I am setting up the SRM-MDM 3.0 catalogue and have setup a fixed sales package and configurable sales package OK.
However, I cannot get the price details to be shown in the SUI. I am using contract prices for all items and have configured the SUI to show Contract Price only in each screen, but the sales packages show no prices in any screen and give an error when ordering which I think is due to no price being found in a table.
Can anyone advise on why this is or is there a document on configuring prices for sales packages?
Many thanks,
Nick

I get the following error when I try and transfer the package back to SRM:
java.lang.IllegalArgumentException: Field with ID 'F89_207' was not populated or does not exist in repository for table 'T1'
Does anyone know what this is caused by?
Thanks,
Nick

Similar Messages

  • How to mark up the price for sales order entry?

    Hi Gurus,
    How to Mark up the price for sales order entry?
    Example: Item Price: $10, Adding 20% Margin
    Selliing price of the item is $12
    we are giving many typs discounts like festival Discount, customerwise, Order value wise etc..
    After giving above discounts, if discount falls below $10 system should not allow to book the order, Trigger should go to respective person or sales person saying that item price falling below cost, system should not allow to book the sales order.
    How to configure this scenarios in Order management Module, appreciate your inputs, advise.
    Regards
    AK

    Thanks for your response,
    can you please guide me step to achieve this requirement.
    Regards
    AK

  • SRM MDM - store multiple pricing for one entry and have it select the price based on a users site

    I've had an interesting request. We have a region where they have one supplier who will support some products for multiple sites. The sites are in different cities and so the pricing varies based on the location of the user. I know how to do price scaling in SRM MDM but wasn't sure if there was a way to have one part that could someone pick the right price based on the user. I don't think this can be done since we don't pass any "user" information in the OCI connection.
    Has anyone run into this scenario and was there some other way to not duplicate the entries or create a separate view just because the pricing was different for the same product but different site? I'm open for suggestions. I'm looking to make long term maintenance of the data as easy as possible.
    We are still running SRM MDM 5.5 SP6
    Thanks,
    Cathy

    Tom,
    Check if the below given link can give you some lead.
    http://help.sap.com/saphelp_NW04/helpdata/en/dc/dc7614099b11d295320000e8353423/content.htm
    Thanks,
    K.Kiran.

  • SRM MDM Catalog- Scale prices

    Hi Experts,
    I am aware that, we can upload multiple quantity based Prices in Qualified Look up Table called "Price" in SRM MDM Catalog repository like stated below :
    Qty   Price
    0-10   2$
    11-22  5$
    But i don't see any option available to enter range value's in Lower Bound field of "Price " Table.
    Please assist.
    Kind Regards,
    SK

    Hi Padhi,
    normally the price base quantity field is to say how much has to be divided the price
    so 1000 EUR for 50 pieces >> 1 piece = 1000/50
    The fact is that in the Catalog you have more than one entry for the price, and you have to decide which one you want. The system is not so smart to change the price based on the quantity.
    Anyway I tried as you suggested to insert the same price base quantity as the lower bound:
    Lower bound: 1 - 100 - 1000 piece
    Price: 10 - 5 - 1 EUR
    Price Base Unit: 1 - 100 - 1000 piece
    In the Catalog I can see the three entries and I can decide which I want.
    I choose price 5 EUR but with 1001 quantity (for which the price has to be 1 EUR).
    In the shopping cart I have 1001 pieces, price 5 euro per 100 pieces = 50,05 EUR.
    This is not the result we want as Scale prices.
    Do the Scale price work in your system?
    Thank you and Regards,
    Maria

  • Special Prices for "SALE" period.

    Dear SD pricing experts,
    We seek a suggestion for a pretty common scenario wherein  when we have a SALE period -- by definition it could mean special prices for SOME of the regular items -- maybe old arrivals / improper condition of the item hence devalued but still perfectly usable, for a specific period. However for the same period, some items (quantities) of the same, which are in brand new condition, would be available for sale at the regular price.
    How can one handle this in the SAP SD pricing or related. This should be such that only the right material goes at the right price and not the GOOD material at the SALE price.
    Please note there is no separate identification' of the "devalued" items. e.g. cloth items, or cosmetic items which have lost their packaging and likewise.
    Look forward to a valuable solution to this.
    Regards,
    Tariq

    Hi,
    It is understood that you want to give special prices for certain items. The special prices can be given through discount condition  K007.
    1.     Create a condition table that includes u2018Order reasonu2019 as one of the fields. Say, the condition table includes Sales organization, Distribution channel, Division and Order reason. Say, the condition table is 650.
    2.     Create an access sequence Z001 u2013 Discount for SALE period; this access sequence has the condition table 650.
    3.     Enter this access sequence in condition type K007.
    4.     Create order reason as 101-Sale period dis A, 102-Sale period dis B, 103-Sale period dis C [Menu path: Spro >> SD >>Sales >> Sales docu header >> Define order reason]
    5.     Maintain condition record for K007 in VK11. Maintain different discounts for different order reason.
    6.     Create a sales order. If the material is eligible for discount, select the order reason [eg; 101]. The respective discount will be reflected.
    7.     The condition record is controlled by the u2018from- tou2019 validity period.
    8.     If you need to reflect the discounted price in the price PR00 itself, assign this access sequence in the condition type PR00 and maintain different prices for different order reason. You will get PR00 value directly.
    Hope this information will be useful to you.
    Regards,
    K Bharathi

  • Moving Average Price for Sales stock and Project stock of a material

    Hiya Gurus,
                     I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                     In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                    Kindly help me on this, it would be deeply appreciated.
    Cheers,
    ZIa

    Hi
    can you look at tables
    EBEW                             Sales Order Stock Valuation
    QBEW                             Project Stock Valuation
    Nat

  • Purchasing info records with different prices for different packaging

    Hi,
    hope, someone can help me.
    We have different prices for different kind of packaging, but all the material is bought in the same unit, i.e. kg.
    Let's say, usually you buy x kg in a drum, but sometimes you buy y (or x) kg in a bottle or in a bag.
    We won't allow variable order units. Even if we would, it's not helpful, because we always order kg.
    So the price depends on a criterion - I don't know, which to take. And we want to maintain the different prices in the info records.
    Is there a solution?

    Hi.
    I went through the history of the problem.It seems that your base unit of measure is KG.Also you have mentined that same material is used in various plants.
    You need to activate the variable ordering unit  2  in material master. This is present in the materila master Purchasing tab.Also note that this data is maintained at plant level. This will not have any impact on the materials which are presnt in the other plants.
    After activating variable order unit in materal master. You need maintains the conversion factors from Order units to Base UOM.(Eg 1 KG = 1 KG, 1BOX = 10 KG etc)
    Create inforecord for the material and maintain price in Base unit of measure.
    In PO enter the order unit as BOX system will automatically calculate the price of BOX based on the conversion factors which are maintained in the material master.
    I belive this is the simple and best solution for your requirement..
    If you have any suggestions please let me know
    Cheers
    Umakanth

  • SRM MDM Catalog - one repository for service, one for goods?

    Hi,
    We are installing SRM MDM 2.0 Catalog and we will use catalog for finding both service and goods items. In one view only services should be displayed and in the other - only goods. Should I then create 2 catalogs (2 repositories) or should I simply use masks and/or namedsearch? If I choose using masks/namedsearches - how do I easiest divide between services and goods?
    Thank you,
    Christina Claughton-Wallin

    Hi Christina,
    You can just one repository and create namedsearches for service or non-service items. This is relatively simple to setup by filtering items which are marked service and adding them to your defined named search.
    Cheers,
    Foh

  • Prices for sales order

    hi all
    I want to create different prices for different sales order under same contract.  The service materials is the same. Does the system allow me to link price to a particular sales order instead of a contract.
    Advice me.
    cheers
    shalsa007........

    Hi
    You can do this by giving the price manually when you create Order.
    If the system does not allow you to enter price manually, then you need to Maintain
    'C' Manual entry has priority in the Condition type Under Changes which can be made Tab.
    Regards,
    Sree

  • Need different price for sales order and billing document.

    Hi,
         I'm having a scenario.I have created a sales order for a material,the order value is $100.I have done up to Delivery.Billing part is only remaining in the flow.Unexpectedly the price of the material increases $20 more.Customer is ok with the new price $120.So how the new price comes in billing document.For this what are all the steps i want to configure?
    Regards
    Raj

    I want to know from you is client entering price manual or condition records maintained, if it is manual.you can go billing in the item pricing condition click on update field and select B i.e carry out new pricing.& enter the current price manually.

  • Last Price for Sales Order History

    Hi Friends,
    I have a requirement in LSMW, where i have to upload Sales Orders data into SAP to convert Customer
    and Material price points for the past X months.
    Is there any SAP standard program or BAPI available for this requirement?
    Thanks in advance.
    Murthy

    Hi Friends,
    I have a requirement in LSMW, where i have to upload Sales Orders data into SAP to convert Customer
    and Material price points for the past X months.
    Is there any SAP standard program or BAPI available for this requirement?
    Thanks in advance.
    Murthy

  • Re: method computes final price for sales transaction-compiles wont run

    Thank you, I will try this. I must have definitely missed something while reading this chapter!
    Have a good day/evening.
    Gizelle

    How else can a pass a private BoughtList that we can
    see is created in the Cashier client to the Pick
    client to be used to display the orders. You could have the Cashier provide a reference to that ArrayList.
    There is also another class in another package that
    handles some aspects of the orders.I think you should get some OOD lessons, if several classes need the same "private" data, somethings wrong. Maybe the private data should become an object by itself, with all the functions that Cashier and Pick and whatever need it for...

  • Minimum Price for Sales Order

    Hi Gurus,
    We want to implement a price check, so that vbap-netwr cannot be under a certain value.
    (Like a kind of PMIN).
    But PMIN is not practible as we want to add additional authority-checks.
    Which user exit or enhancement can be used to achieve this.
    Any sample cadingn would be appreciated.
    Thanks
    Dieter

    Hi
    Use VOFM condition value. See the condition 014 'best value' as a simple sample. Perhaps you can set other condition and set it as statistical to do the comparations in the subroutine.
    I hope this helps you
    Regards
    Eduardo

  • SRM MDM catalog  with Negative contract price

    Hi SRM / MDM Gurus,
    I am facing a problem, when transferring contract data from SRM MDM catalog 3.0 to SRM 7.0 shopping cart process.
    Scenario:
    We have a u201Cnegativeu201D contract Price in MDM and the same I can able to see in the SRM MDM catalog. When trying to add that contract item to shopping cart the price is always positive. For example the SRM MDM catalog contract price is -100.00, when trying to add that item to shopping cart it is always 100.00.
    Is there any configuration or OSS to resolve this issue?
    Kindly also let me know is it  possible pass negative value to shopping cart?
    Kindly let me know your comments.
    Thanks.
    Regards,
    Magesh Basavaraj.

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • SRM 7.0 and SRM MDM Installation query

    Hi,
    I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
    1) Do I need to install any other servers other than this like EP and PI etc?
    2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
    Prerequisites
    1. SRM Server- Installed with ORACLE database
    2) For SRM MDM
    Ø        Download the SRM-MDM Catalog 2.0 installable from Market Place-- Done
    Ø         Install the MDM Server and other GUI Clients--Done
    Ø     UnArchive the SRM-MDM repository available with the installables only
                         Need help for 
                 . Not able to find DBMS server
                 . User
                   . Password for DBMS setting
    Ø      Deploy the two SCA files - MDMJavaAPI and SRMMDMCAT on WAS and restart the Portal- Done
    Ø        Access the Config UI by using the URL http://:/SRM-MDM/SRM_MDM and change the layout as per the requirement. In this you can specify the fields to be displayed for Search, type of UI etc for the particular user
    . Where I can get the "Port"
    Will follow the below steps once the above issues are resolved
    *Create the Web Service in SRM system and specify all the required
    parameters. You should get the SRM-MDM configuration guide from Market
    Place.
    *Change the Org Plan in SRM to assign the Catalog to the SRM users.
    *Login into EBP and select SHOP, you should get the SRM-MDM Catalog link
    if all the configurations are there in place.)
    3. Web Application Server
    > Is seperate  WAS required even after installing SRM AS JAVA stack, if yes what to install
           4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
               . Install SRM MDM
              Do I need to  install both or only one or is this not required, if I install SRM MDM my question is what is the use of     
              the above point 2 steps process  this one
             Thanks,
              Jairaj
    Edited by: M Jairaj on Feb 3, 2010 3:43 PM

    Hi,
    > I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
    >
    > 1) Do I need to install any other servers other than this like EP and PI etc?
    >
    As you have already installed Java stack then it will be your EP. You don't need PI for SRM MDM.
    > 2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
    >
    >                      Need help for 
    >
    >              . Not able to find DBMS server
    The DBMS Server property defines the network identification string of the DBMS instance / machine / server that is used by the DBMSspecific client on the MDM Server machine to connect to the DBMS. The brand of DBMS on which the repository is running is shown in the DBMS Type property.
    NOTE ►► When you mount two MDM repositories with the same name (but located on different DBMS Servers) on the same MDM Server, MDM distinguishes them in the Console Hierarchy pane by appending the name of the DBMS Server in angular brackets to the repository name (e.g. u201Crepository <server>u201D).
    >              . User
    >                . Password for DBMS setting
    >
    ent. In this you can specify the fields to be displayed for Search, type of UI etc for the particular       user
    >      
    >       . Where I can get the "Port"
    >
    Note 1414670 - MDM 7.1: Adjusting MDS port in MDIS and MDSS ini files
    Check SAP Note 1077701 - SRM-MDM Catalog - FAQ
    >        4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
    >            . Install SRM MDM
    >  
    Check installation guide for this.
    Thanks
    Sunny

Maybe you are looking for

  • ORA-01403: no data found while querying View

    Hello, I have a problem with querying a View which includes XML-Types. If the View is empty I get a white website with the following error-message: ORA-01403: no data found How can I implement my own error-website if no data was found?? This is the w

  • Sound not working on ipad speakers, shows headphones and no headphone is plugged in.

    My sound is not working on my ipad2 speakers.  when I adjust the sound button it shows headphones, I have no headphone installed.  I tried reseting the ipad (turned off and on), reset with itunes, updated os.

  • Help with a panel

    I have seen many tutorials where there is a panel at the bottom with "properties", "filters" and "parameters". But I don't have that panel. I have tried to change workspace but I can't get this panel. When I choose  (Window > Properties) I only get a

  • Internet Explorer 9 and flash player

    This post pertains the this website from my son's high school baseball team website which I have put together for them using Front Page 2003. http://www.novatitanbaseball.com/video.htm Everything is fine in Firefox and Chrome.  In IE9 I have already

  • Problems upgrading from Logic 6.4 to Logic Studio

    I recently had my hard drive die, so i am now in the process of reloading all my software.  I started with Logic 6.4 years ago and have been purchasing the upgrades ever since. I first installed Logic 6.4 with the dongle inserted than i installed Log