SRM-MDM-XI scenario

Hi all,
I am trying to use the SRM-MDM-XI scenario. When i run the report BBP_CCM_Transfer_Catalog in SRM to transfer the product data to MDM, i get a success message.
The communication channel for product data transmission is ready.
However in the sxmb_moni of XI system i see the following error. :" Inbound interface found several times (for same sender and receiver) for the outbound interface".
Kindly help me resolve this error.
Thanks,
Nikhil

Hi Nikhil,
Check the scenario created in Integration directory also check if you are using same receiver interface for Multiple scenarios.

Similar Messages

Service hierarchy for SRM-MDM catalogi scenario

Hello,
We tried setting up the 'new' SRM-MDM service hierarchy catalogi. I've looked over some sdn threads already and read the SAP help http://help.sap.com/saphelp_srm70/helpdata/en/6b/7fb967f6cd4df0a5a9d5dec7e4aa72/frameset.htm. Both told me the service hierarchy should work in the SRM 'bidding/RFx' scenario. Since service hierarchy should work for RFx we continued trying setting it up but ran into the following problem:
Up on opening our service hierarchy catalogi it returns the following message 'Table is empty' and does not show us any items(mss hierarchy is enabled in the SRM-MDM UI configuration for this catalogi). If we change thé UI setting to 'products' the items do show-up in a 'flat' manner (without hierarchy).
- We've set up grouping in the SRM-MDM catalogi for these items
- We've set up an entry in the MSS hierarchy lookup table and assigned this entry some of the catalogi items
- We've not setup any MSS Hierarchy price
- We've setup the item types, the outline item is of type 'MSS header' the subtypes are of type 'Free Text' and the MSS hierarchy entry is of type 'MSS header' aswell.
- we've setup the hierarchy manually with testdata via the important manager (no pi/ix).
Could anybody confirm service hierarchy works in the RFx scenario (mss hierarchy enabled)? Is there something we've missed or are forgetting? Any other pointters are greatly appreciated.
Kind regards,
Tim

Hello Masa,
We have not loaded our service hierarchy catalogi items from ECC nor SRM. We've manually set-up test-date via the import manager and data manager tools. This, as long as you set it up correctly, should still work in my oppinion?
For the UI configuration the service (mss) is enabled causing the 'empty table' line to show up. If we would change it to 'product' the items would show but in a flat manner.
Do you have any other pointers . F.e. what the item types should be (subitems: free-text and header: mss-header) and what the role of the mss-hierachy and mss-pricing table are and what we should do with those? We've configured grouping (main item, component item, substitute item ..) to enable hierarchy is this correct?
Ps. What does 'MSS' stand for, what does it mean?
Kind regards,
Tim

Regarding SRM MDM 3.0

Hi Gurus!!
I will soon be working on SRM MDM business scenario,so i want to be prepared beforehand.
Please guide me about the integration details from SRM as well as MDM side,and also important documentation\link regarding the same.
Thanks,
Ravi

Hi Ravi,
Please refer this below article to start with SRM-MDM Catalog Setup u2013 Ready Reference
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8?quicklink=index&overridelayout=true
Also refer, SRM-MDM Catalog 3.0 Repository information SAP Note 1171711
https://websmp130.sap-ag.de/sap/support/notes/1171711
and SRM-MDM Catalog 3.0 - Installation & Configuration SAP Note 1177779
https://websmp130.sap-ag.de/sap/support/notes/1177779
SRM MDM Integration: https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012002523100015170792009E
Check this link for component Installation: https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012002523100012367812008E
For configure SRM MDM catalog: https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001156822009E
Regards,
Mandeep Saini

SRM-MDM Catalog publication in portal

Hi experts,
Iu2019m facing some difficulties concerning MDM / portal integration. We are implementing SRM-MDM catalog scenario and Iu2019ve already created a catalog in MDM Data Manager. Iu2019ve also set the parameters for the web service definition in SRM system, and assigned the Catalog ID in ppoma_bbp.
However, Iu2019m still not able to access my catalog information in portal. When I try to access my catalog it is necessary to introduce again the logon details and an error message u201CLogon failedu201D is displayed, which is not normal right?
In addition, if I introduce my logon details nothing happens but the error message is changed for a warning message u201CLogon failedu201D. Consequently I cannot access my catalog in portal.
Can someone help me? What might being wrong with my catalog publication?
Many Thanks!
Best regards,
Andreia Nascimento

Hi,
Yes, You can define any user which has "Catalog User" Role defined in MDM in SRM Web Service". and this is not required to have same user in SRM system. You can assign this web service ID as attribute to any SRM user.
Did you get "Connection Successful Message"?? I couldn't see that in your Trace.. Once you test Connection then you should get message in Green "Connection test was successful".
Also, Check the following Things and revert with the result:
1. Is your repository Loaded?
2. Try to Console through the User which you have defined in Web Service. This will confirm whether User credentials are correct or not.
Also, let us know which version of SRM you are working with and what is version of your SRM-MDM Catalog.
Regards,
Shiv
Also Check this document (Page no 32 ) and make sure if you have defined other parameters correctly in the web service definition.
https://websmp103.sap-ag.de/~sapdownload/011000358700000134212010E/srm_mdm_integration.pdf
Regards,
Shiv
Edited by: Shiv Prashant Dixit on Mar 5, 2010 11:32 PM

SRM MDM Catalog - Taxonomy table

Hi all,
Could any one please let me know, that do we realy require to create Taxonomy table in SRM MDM-Catlog scenario?
Please assist.
Thank You.
SKP

Hi SKP,
NO. not required .
Taxonomy mode is available if the repository contains taxonomy tables.
Taxonomy mode is unavailable if the repository contains no taxonomy tables.
all depends on your data model .i.e upon your repository . as you aware repository can contain one main table and sub tables.
for eg. sub table - Taxonomy - product group ( tree structure like hierarchy of categories and subcategories...
Hierarchy table - product hierarchy
regards
muthu

MDMGX - SRM MDM Catalog

Dear MDM Guru's,
I am new to SRM MDM catalog scenario. Need Data flow steps from SRM and ECC to SRM-MDM Catalog Repository by using MDMGX and MDM_CLNT_EXTR transaction.
For Example : Please provide information in below format.
Currencies from SRM and ECC to SRM MDM Repository
Product Groups from SRM and ECC to SRM MDM Repository
Points will be awarded for useful answers. Please help.
Regards
Jacob

Hi Jacob,
Please find the documents below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0940876-42fe-2d10-77be-a82aaa163e13?QuickLink=index&overridelayout=true
MDM_CLNT_EXTR is used to extract main table information.It bacically extracts data in IDOC format so PI is required to convert IDOC format into XML format before sending data to MDM.
Below is the article on MDM_CLNT_EXTR:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6084defd-7e0c-2c10-0caa-97a52408e3e7?QuickLink=index&overridelayout=true
Regards,
Neethu Joy

XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

SRM-MDM Catalog - XI Scenario

Hi,
I am working on SRM-MDM Catlog 1.0 integration with XI.
I have to configure scenarios in XI for:
1) Upload of Supplier catalog via Server File System to SAP MDM catalog. for example in XML Format.
2) Replication of Product and COntract data.
We have to use SRM_MDM_CATALOG scenario contained within XI Content uploaded for SRM_MDM.
=>I already have uploaded the XI Integration Content in Integration repository (SRM_MDM_CATALOG).
=>I already have SRM-MDM 1.0 catalog Configuration guide, But it doesnot detail much about scenario(components involved in Integration Repository and Integration Directory)
Do anyone have some document which details about scenario or any help material regarding the same/or if some expert can Guide/Brief me on the scenario.
Thanks and Regards,
Vijay Raheja

Hi,
Please see the below link
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
Regards
Chilla..

Message is not going to XI in SRM- MDM scenario

hello,
We are doing SRM_MDM scenario.
We have installed SRM-MDM Catalog 2.0 Business Contents on XI.
But i couldn't see any Outbound Interface in these standard contents.
I want xsd for CatalogPublicationRequest_Out.............. where will i get that (transaction) ???
Also when i execute the Report ROS_SUPPLIER_SEND_TO_CATALOG in SRM, I could see my message( CatalogPublicationRequest_Out ) in SXMB_MONI of SRM.
But its not going to XI...............I can't see it in SXMB_MONI of XI.
That message in MONI of SRM have Sender but Receiver field is blank.
May be because of this is it not going to XI.
Please tell me the steps that i need to follow.
Help will be highly appreciated.............. its urgent
Thanks in advance
Maheshwari.

Hi Hi Maheshwari,
Sap has shipped the preconfigured proxies for the transaction.
ROS_SUPPLIER_SEND_TO_CATALOG.
you can get the complete business Pack and related docs for SRM_MDM Catalog on the Service market place.
you need to Import of PI Business Content for SRM-MDM Catalog in Integration Repository
For that Place PI content file (XI_7_0_SRM_MDM_CATALOG_1.0_00_00.tpz) in directory /usr/SAP/xid/sys/global/xi/repository_server/import. This Content file can be found in Business content Import of PI Business Content for SRM-MDM Catalog in Integration Repository.
But first before importing above file.
You have to configure SLD Connections in which:
1.Defining Technical System for SRM Server, MDM and SAP PI.
2.Creating Business systems for SRM, PI and MDM
u also need to do Configuring Setup for ABAP Proxies:
1. use Transaction SM59 for creating RFC destination for HTTP( TYPE H) where u Specify Host Name of the PI server, Service Number and Path Prefix in Technical Settings tab.
2. u also need to configure SRM System as Local Integration Engine. For this enter transaction SXMB_ADM .
HOPE IT WORKS,
Thanks,
Mandeep Saini

Scenario - ( EC6 - XI - SRM-MDM Catalog )

Hi,
I am working on Scenario"Transfer Info records and contracts from ERP, Auto Import of contract and info Records from ERP".
Scenario:

Sender Side:
=>Run Tcode: MECCM in ERP system and send Purchasing info records to Catalog system via XI.
Recvr Side:
=>Same will be received as XML file in a file location(FTP Server running on SRM MDM catalog system).

XI Side:
=>I have uploaded XI Content in repository and same has been transported to Integration Directory also.
=>Using Intergation scenario configurator i have done all configurations in Integration Directory also.
=>I have configured XPATH in condition field for interface determination as dicussed in SAP OSS Note 967088 to be used for ths scenario.
=>Now when i am running the tcode from sender side message is getting stuck in SXMB_MONI with error: No receiver Determined.
I can understand there is some problem in Receiver Determination. When i tried to check all settings, only thing i found fishy was There was no Interface mapping being displayed in Interface determination but condition field is filled as discussed in SAP note 967088.
I doubt there is some problem in interface determination only.
Expert comments are required. I can send you screenshots if required.
Any help is appriciated.
Thanks,
Vijay Raheja

Here is the XML Payload
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:CatalogueUpdateNotification xmlns:nr1="http://sap.com/xi/SAPGlobal/Global">
- <MessageHeader>
<ID />
<CreationDateTime />
</MessageHeader>
- <Catalogue actionCode="04">
<CompleteTransmissionIndicator>TRUE</CompleteTransmissionIndicator>
<ID>SRM-MDM CATALOG</ID>
<TypeCode>04</TypeCode>
- <Model>
- <PropertyDataType actionCode="04">
<ID schemeAgencyID="">PURCHORG_TYPE</ID>
<FormatCode>String</FormatCode>
</PropertyDataType>
- <PropertyDataType actionCode="04">
<ID schemeAgencyID="">PURCHINF_TYPE</ID>
<FormatCode>String</FormatCode>
</PropertyDataType>
- <Property actionCode="04">
<ID schemeAgencyID="">PURCHORG</ID>
<PreferredName languageCode="EN">Purchasing Organization</PreferredName>
- <PropertyDataTypeReference>
<ID schemeAgencyID="">PURCHORG_TYPE</ID>
</PropertyDataTypeReference>
<AspectID>LIST_VIEW</AspectID>
<AspectID>DETAIL_VIEW</AspectID>
<TargetInterfaceElementID schemeID="01">NEW_ITEM-PURCHORG</TargetInterfaceElementID>
<MultipleValueIndicator>false</MultipleValueIndicator>
<TextSearchableIndicator>false</TextSearchableIndicator>
<ParametricSearchableIndicator>false</ParametricSearchableIndicator>
<ValuationRequiredIndicator>false</ValuationRequiredIndicator>
</Property>
- <Property actionCode="04">
<ID schemeAgencyID="">INFREC</ID>
<PreferredName languageCode="EN">Number of Purchasing Info Record</PreferredName>
- <PropertyDataTypeReference>
<ID schemeAgencyID="">PURCHINF_TYPE</ID>
</PropertyDataTypeReference>
<AspectID>LIST_VIEW</AspectID>
<AspectID>DETAIL_VIEW</AspectID>
<TargetInterfaceElementID schemeID="01">NEW_ITEM-PURCHINFREC</TargetInterfaceElementID>
<MultipleValueIndicator>false</MultipleValueIndicator>
<TextSearchableIndicator>false</TextSearchableIndicator>
<ParametricSearchableIndicator>false</ParametricSearchableIndicator>
<ValuationRequiredIndicator>false</ValuationRequiredIndicator>
</Property>
- <CatalogueSchema actionCode="04">
<ID>MMPUR_CAT</ID>
<CatalogueSectionListCompleteTransmissionIndicator>true</CatalogueSectionListCompleteTransmissionIndicator>
- <CatalogueItemProperty>
- <PropertyReference>
<ID schemeAgencyID="">PURCHORG</ID>
</PropertyReference>
<OrdinalNumberValue>1</OrdinalNumberValue>
</CatalogueItemProperty>
- <CatalogueItemProperty>
- <PropertyReference>
<ID schemeAgencyID="">INFREC</ID>
</PropertyReference>
<OrdinalNumberValue>2</OrdinalNumberValue>
</CatalogueItemProperty>
- <CatalogueSection actionCode="04">
<ID>001</ID>
<Name languageCode="EN">metal processing</Name>
</CatalogueSection>
</CatalogueSchema>
</Model>
- <Content>
<CatalogueSchemaID>MMPUR_CAT</CatalogueSchemaID>
- <CatalogueItem actionCode="04">
<PropertyValuationListCompleteTransmissionIndicator>true</PropertyValuationListCompleteTransmissionIndicator>
<ID>5300000000__________00000RBB1____0______</ID>
<Description languageCode="EN">srm material 1</Description>
- <Classification>
<CatalogueSchemaID>MMPUR_CAT</CatalogueSchemaID>
<CatalogueSectionID>001</CatalogueSectionID>
</Classification>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE</ID>
</PropertyReference>
- <ValueGroup>
<ID>1</ID>
<OrdinalNumberValue>1</OrdinalNumberValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/AMOUNT</ID>
</PropertyReference>
- <ValueGroup>
<ParentID>1</ParentID>
- <PropertyValue>
- <AmountSpecification>
<Amount currencyCode="EUR">0.0</Amount>
</AmountSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE_BASIS_QUANTITY</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <QuantitySpecification>
<Quantity unitCode="EA">2.0</Quantity>
</QuantitySpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
<NameSpecification />
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ITEM_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>00000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/LEAD_TIME</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>0</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/ORDER_UNIT</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>EA</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_GROUP</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>001</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>000000000000000011</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/SUPPLIER_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBDE1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">PURCHORG</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBB1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">INFREC</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>5300000000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
</CatalogueItem>
- <CatalogueItem actionCode="04">
<PropertyValuationListCompleteTransmissionIndicator>true</PropertyValuationListCompleteTransmissionIndicator>
<ID>5300000000__________00000RBB1RBBE0______</ID>
<Description languageCode="EN">srm material 1</Description>
- <Classification>
<CatalogueSchemaID>MMPUR_CAT</CatalogueSchemaID>
<CatalogueSectionID>001</CatalogueSectionID>
</Classification>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE</ID>
</PropertyReference>
- <ValueGroup>
<ID>1</ID>
<OrdinalNumberValue>1</OrdinalNumberValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/AMOUNT</ID>
</PropertyReference>
- <ValueGroup>
<ParentID>1</ParentID>
- <PropertyValue>
- <AmountSpecification>
<Amount currencyCode="EUR">200.0</Amount>
</AmountSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE_BASIS_QUANTITY</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <QuantitySpecification>
<Quantity unitCode="EA">2.0</Quantity>
</QuantitySpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
<NameSpecification />
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ITEM_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>00000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/LEAD_TIME</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>5</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/ORDER_UNIT</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>EA</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_GROUP</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>001</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>000000000000000011</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/SUPPLIER_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBDE1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">PURCHORG</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBB1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">INFREC</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>5300000000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
</CatalogueItem>
</Content>
</Catalogue>
</nr1:CatalogueUpdateNotification>
Thanks,
Vijay Raheja

Extended Classic Scenario Pricing issue, can I over come by using SRM-MDM?.

Hi SRM GURU'S,
I am using ECC 6.0, SRM 5.5, SUS, LAC, cFolders and SRM-MDM with Extended Classic Scenario.
My Question is : In case of Extended classic scenario, there is issue with Pricing and conditions. Is there any possibility to overcome this issue by using SRM-MDM. Or do I have to go for IPC. My client has not brought IPC. I have to cover Pricing with the above components.
Anyone suggest me, how to proceed. Thanks in Advance. Awaiting for quick response.
Thanks & Regards,
John.

Hi Masa,
We can maintain Price and conditions as a record in CCM for Particular Material or Vendor. When you add that record to shopping cart it will update. I mean, If the provision is available in MDM, I don't want to use the Two components for same functionality.
If I use IPC, Is there separate license for that. What else need to be updated to use IPC (Patches etc).
If you have IPC configuration material, could you please share with me? How to bridge the SRM Conditions and ECC Conditions?
Please clearly give me details. I really appreciate you.
Regards,
John.

SRM -MDM in classic scenario

Hi,
Please let me know if am using SRM MDM in classic scenario then
u2022If I create a shopping cart in SRM do I need to maintain the product category of the items selected from MDM in SRM as well.
u2022Also, if PO is created in MM then does it mean that all the products in MDM have to be created in MM as well. If not then what is the scenario like.
Thanks,
Manu
Edited by: Manu Agrawal on Apr 24, 2009 12:15 PM

Hi
If my understanding is correct ,i will reproduce your question again . If you create shopping cart from the supplier catalogue in a classic scenario how the Material group sync happens when PO is created in the Back end R/3.
My assumption and the practice followed generally is that a Fixed Material group is decided and automatically maintained via OCI interface when shopping cart is created .Which means we define the rule for all catalogue items to determine and populate respective material group automatically into shopping cart.
As shopping cart is created since for the catalogue items there will be contract and source assigned in the ERP ,as soon as PR is replicated to R/3 as per classic scenario , the PR will have supplier assignment and if you run auto order transaction code system will generate PO in R/3 and sent to the supplier based on the condition records.
For the Material group you will configure it in R/3 for all catalogue items and replicate it in SRM and also you will provide input for the BADI or FM which create shopping cart automatically from catalogue through OCI method.
Hope this helps..
regards
Narahari

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

ECC TO SRM-MDM CATALOG THROUGH SAP PI

We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog. But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
Thanks in advance.

Hi Shiv,
Many thanks for your reply.
Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
So, can someone help me? Any ideas?
Thanks in advance.
Best regards,
Andreia

SRM-MDM catalog 3.0 - Installation Process

Hi All,
I'm in the process of installing SRM-MDM catalog 3.0 but I'm not sure about the correct installation process.
The SRM-MDM catalog 3.0 installation guide indicates that the following instances are mandatory for SRM-MDM Catalog system:
1- Java system with the central instance, the central services instance, the database instance
2- MDM Server, and MDM Import Server
We have covered the first point by installing an SRM 7.0 JAVA system. Regarding the second requirement, I have some doubts in the way it should be completed. What we did so far was to install the SRM-MDM catalog 3.0 from the MDM 7.1 installation master. So, we now have two MDM server instances: MDS and MDIS.
I'm stuck now. I'm not sure on how to connect my SR-MDM system to the JAVA DB (created in step 1) to create a new MDM schema within it. This makes me wonder if I've followed the correct process. Could you please clarify and explain which steps should be performed to get my SRM-MDM system up and running? Actually my main concern is..Should I first install a MDM system as it's described in MDM IG, and after that perform the installation of the SRM-MDM catalog as I've already done in step 2?
Hope being clear enough I'll wait for your suggestions.
Thanks and regards

Hi Diego.
The Installation Note Number for SRM-MDM Catalog 3.0 is : 1177779. The recommended steps would be to follow how the Installation Guide recommends you to do so.
But still your assumption is correct. MDM landscapes and Java landscapes are both different set of categories to be installed to make the Catalog scenario to be successfull.
Step 1: Make sure you have the back end database server(SQL/Oracle/???) is installed.
Step 2: Make sure all the MDM components(MDS, MDIS, etc) is installed.
Step 3: Make sure Java WebAS is installed correctly.
Step 4: Now deploy the Catalog SCA and MDM Connector deployed in the Java WebAS.
Step 5: You can unarchive and load the repository.
Step 6: Try to launch the catalog using the URL provided to check and make sure if the connection is fine.
Also what Masa has mentioned is the communication path how the whole process is achieved technically and that doesn't mean that it has to be in the same order which he has mentioned. The below sequence is just an path to describe how the communication is achieved technically.
User -> Browser(Search UI deployed on AS Java) -> (Java API on AS Java) -> MDM Server -> MDM Repository -> DB
Relating Masa's path with the above steps
User ->
Browser(Search UI deployed on AS Java) -> Step 3 and 4
(Java API on AS Java) -> Step 3 and 4
MDM Server -> Step 2
MDM Repository -> Step5
DB-> Step 1
Hope this helps.
Regards
Bala
Edited by: chandar_sap on Aug 30, 2010 6:16 PM

SRM-MDM-XI scenario

Similar Messages

Maybe you are looking for