SRM replenishment collaboration with Supplier consigment Material.
Hi . Srm community.
I have need to implement the funcionallity the supplier can see the stock of material in consigment. the srm standar have that functionallity or is neccesary make developments to meet .
thanks a lot .
thanks Muthu Man.
that mean the Srm does not have the functionallity in standard to drive stock and is necessary use the SMI module of SCM ?
best regards.
Edited by: Oscar vazquez on Dec 10, 2010 12:39 AM
Similar Messages
-
Supplier collaboration with contract management
Hi All,
is there any functionality available in SRM to allow collaboration with suppliers for the contract management functionality within SRM?
I thinking of any possible integration via SUS?
Cheers
ChrisHello Chris,
Use of cFolders can be one of the option, which version you are working on.
SRM supports integration with SAP Product Lifecycle Management (PLM) cFolders 2.0 or higher. Once SAP PLM cFolders has been installed, purchasers can create a folder there to store information and share it with potential suppliers.
http://help.sap.com/saphelp_srm2007/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
Hope this might be helpful.
Thanks
Ashutosh -
Supplier collaboration with SNC
Hi Gurus,
We intend to use Supplier collaboration with SNC, where plant will share component plan with supplier and supplier will comeback with constrained component plan and based on which plant will modify production plan.
These are the steps we have done:-
1) Created BP as Organization for Plant and Supplier
2) Created BP as person and assigned to plant and supplier respectively
3) Extended product to the supplier and created TLane
4) We are able to login into web portal for supplier view with login and password maintained.
issue are:-
1) We understand that, component forecast will come from APO and it will come to as demand. If we see Demand Tab and look at Order Forecast Monitor - > Order forecast details, it asks for selection of SKU and Location. If we select our SKU and vendor Location created, it says Invalid Selection......Not sure if we have missed anything.
2) When vendor will confirm the plan, which key figure he will modify?? which Tab we have to refer.
Any help will be appreciated.
thanks,
jaideepHi Gurus,
Yes, the OSS helps and we are able to see product location in the Order Forecast details screen.
We are checking Key figure " Supplier Planned Receipt" which supplier will use to modify his plan against customer requirement.
Wondering this key figure is Non Editable for our case....then how supplier will enter his constraint plan?? Any help
Are we missing any customization to make key figures editable/non editable like Planning Book in standard APO?? plz help -
Help about the last SRM version and interaction with suppliers
Hello, I need the confirm that the last SAP SRM versione is the 7.0. Which are the differences between 5.0 and 7.0? Do you have materials about the interaction with suppliers for bids? Thank you!
DanyHi,
There are a lot of differences between the SRM 5.0 and SRM 7.0.regarding the Bidding Scenario.
Infact SRM 7.0 is released with Public Procurement service(PPS)
The main differences
SRM 5.0 -tender fees payment and EMD (Earnest Money deposit) is thro' Development
SRM 7.0 -Tender fess -Payment can be made in SRM thro'Payment Gateway
- EMD Fees can also be paid in the SRM 7.0 which is Standard Functionality..
There are lot of differnce
Just Wait for a day or two I will send the difference to your Business Id
Regards
G.Ganesh Kumar -
SRM confirmations result in zero value material documents
We're on SRM 4.0 classic scenario.
We currently have a situation where we create confirmations in SRM but some of them ended up with zero value material documents; therefore, no accounting documents are generated. It also means no accruals are booked for the receipts.
I've compared several 'good' as well as 'bad' confirmations, and can't seem to tell the difference as to what may cause this issue. Does anyone know what may cause the confirmations to lose their price values in R/3?
Your help is appreciated.
SNDear Sreekanth,
Check following things
In SPRO--> PRDn --> rem --> cost object controlling --> Define Default Values for Cost Object Controlling
check for your order type what is the costing variant
and go to OPN2
for that valuation variant what is the stratergy sequence?
based on this setting only the cost for GR is calculating
if the stratergy sequence is 7 valuation price according to price control of material
then check the price contril is it V or S, If its V, whats the price maintained for V -
WHATS THE FLOW OF A PURCHASE ORDER WITH REGARS TO MATERIAL MANAGEMENT ?
WHATS THE FLOW OF A PURCHASE ORDER WITH REGARDS TO MATERIAL MANAGEMENT ?
Hi
see the MM flow with related Transaction codes
MM Cycle:
Purchase Requisition-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
you better go through all these links u will get all the info what ever u need
for mm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
Reward points if useful
regards
Anji -
Supplier collaboration and Supplier registration
Hello ,
Has any worked on supplier collaboration and Supplier registration scenarios .
I need some documents on the above topics.
It would be of great help if some one could send these documents on this .
Regards
JassiHi Jaspinder,
As per ur last mail query.
The Supplier Collaboration and Supplier Registration these two scenarios are comes in the picture when ur talking with Supplier or involving Supplier for the decision making process.
1) For Supplier Collaboration we need to configure PDP with SI and Service Procurement and CCM.
2) For Supplier Registration comes under Strategic Sourcing scenario.
You will get the configuration guide for the same at the Service market place.
Please award the points if it helps u in resolving the issue.
BR,
Vijay Mittal -
Before Purchase - what to discuss with supplier?
Limited IT knowledge - 20 years of Macs.
Inherited a Xserve and server 10.4.
Basically users are filesharing- generic logon to sharepoints - Macs are 'hotdesked' and have machine location as Account Name.
Merger means we have a design office of 5 , satellite offices with photographers , admin staff.
Opportunity, and I daresay a need, to improve security - budget for new Xserve and New server software.
What do we need to discuss with supplier/
Currently desktops are not uniform, software packages are 'fairly' standard but mix of 10.4 and 10.5, Adobe CS, CS2, CS3 - and there are actually production reasons for retaining the older versions.
Management suggest the server 'manages' the desktops for uniformity - can this be done (like schools?) or would this choke workflow if implemented? Does it impose a load on the server?
Anti virus stratergy?
Password policies?
any other thoughts?I support a design studio where five Macs are hotdesked (shared among multiple employees with one login account on each computer) without a management server. Employees leave active files strewn all over the Desktop and occasionally organize them into folders with their names. This was not ideal until affordable Hard Drives and Time Machine came along. At least, now all files are backed up.
I understand the need for different versions of the OS and Adobe CS's. It is not worthwhile to make identical setups for all the different workstations. Also because of the collaborative environment, and general disregard of tech protocols by the designers, they tend to work better if they didn't have to log in and out of accounts every time they just want to tweak something for 3 minutes. So, I decided to forgo the "one login per user" and decided to hotdesk one user ID for the whole computer (and one administrator ID for installing software and printer drivers).
As for anti-virus, I cannot recommend any off the shelf software - as they create a mess while trying to protect your computers. For some reason, Anti-virus software and DTP/Graphic softwares have the highest probability of complications.
As for passwords, I prohibit anybody from password protecting/encrypting any file on the computer (encryption is allowed for data being sent outside). I believe government agencies have this policy also in order to retain continuation of service when an employee leaves. Thus, preventing anybody from leaving anything personal on the computers.
Now, you might want to do something about the remote/satellite offices. These should probably be (almost) identical computers with the newest hard/software that are heavily managed. The question is, how do they connect to the server? Are they plugged in ALL THE TIME? Are they notebooks that only report back to the server once in a while? You might want to come up with a plan for remote desktop support, so you can take over the controls over IP.
But
If your company is growing fast and thinking of expanding, you should start building a "one login per user" policy, use network home folders on the shared machines, and managing the workstation settings on a server. It imposes a lot on the server and mainly the network (with those 300MB PSD files) so you probably want to upgrade your network more than any other hardware. When your office purchases computers, they should be replaced in multiples, so at least two computers can use the settings you create on the server. The main purpose of managing the workstations should be to improve workflow and reduce overall management costs. If every user had to work harder to use the new system, then something is wrong. -
Is thr SAP functionality to have 301 movement type report with supplying pl
Dear all,
Please tell me is there any standard functionality to have report on 301 movement type with supplying plant.
Please guide.
Regards,Hi,
Goto SPRO > MM > Inventory Management and Physical Inventory > Reporting > Define Field Selection for Material Document List > Here add field MSEG-UMWRK for program RM07DOCS and mark "Selection" and "output" both.
And check in MB51 Report, you will get Plant (WERK - Supplying Plant) and Receiving Plant (UMWRK) both fields available. -
Web Conference for Join Lync Meeting with supplier
Hi,
I would like to know Web Conference for Join Lync Meeting with supplier
Please kindly to explain.
Thank you in advance.
Supannee.The Web Conferencing service manages conference data collaboration, including native support for PowerPoint presentations, document sharing, whiteboard, polling, compliance logging, annotations, and handouts. While
scheduling and joining a conference remain the same as with other modalities, the client communicates with the Web Conferencing service by using the Persistent Shared Object Model (PSOM) protocol. PSOM is a custom protocol that is used for transporting web
conferencing content.<o:p></o:p>
Lisa Zheng
TechNet Community Support -
Issue with Supplier Open Interface Import Program
Hello Folks,
I need help with supplier conversion. I am trying to load suppliers through the supplier open interface program. I see that the record got rejected in AP_SUPPLIERS_INT table with status as REJECTED. However i do not see the record in AP_SUPPLIER_INT_REJECTIONS. Therefore, i am not able to understand the rejection reason. I enabled debug can seeing this log..
assign_party_usage (+)
do_assign_party_usage (+)
effective_start_date = 2011/05/12 effective_end_date = 4712/12/31
duplicates_exist (+)
No date tracking for this usage SUPPLIER. Check duplicate assignment.
l_has_duplicates = Y
duplicates_exist (-)
assign_party_usage (-)
Rejected Vendor_Interface_Id: 15004, No. of Messages from Create_Vendor API: 2, Message From Create_Vendor API:
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00999: Custom Report
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Importing Suppliers
MSG-00005: After Get_Header_Information
MSG-00020: After SRWEXIT
As per my understanding from the log, there is some problem with party_usage_assignment. I would really appreciate is someone can help me debug the exact problem. Else i would have to open a SR for this
Thanks so much looking forward for your answers.Pl post details of OS, database and EBS versions.
Pl see if MOS Doc 1060824.1 (R12: Supplier Open Interface APXSUIMP Errors with REP-0004 Output Does Not Indicate Reason for Rejection) is applicable
HTH
Srini -
Mandatory fields With reference to Material types
Dear Gurus,
I need to make few fields as mandatory with reference to material types while creation of the material master data.
For example:
For Semi finished and Finished Schedule margin key is required(mandatory)
For Raw Materials Schedule margin key is optional.
Regards,
SiddharthHi
find following step to make field mandatory for material type
Follow the stpes for making field as optional, required entry
1 click the tab ,(Which is u want to be Required entry )and get the field name by pressing F1 key and then
2.Go to T.Code: OMSR and enter that field name and get Selection Group
once you get selection group and field name
3 Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type; example :;For ROH material type the Field reference is ROH
3. Use T.code:OMS9,, Double Click your Field Reference and select field selection Group , & select round box of Required Entry or optional and save
check following link you will get clear idea [How to configure the fields required for each Material type ?;
Regards
Kailas ugale -
SRM 5.0 with XI 3.0
Hi ,
Can I integrate SRM 5.0 with XI 3.0.
Thanks & Regards,
krian.
Edited by: Kiran Ponnam on Jan 14, 2008 8:57 PMHi,
The Discussion will help you
SRM AND SAP XI
XI with SRM 4.0
Regards
Agasthuri Doss -
Collaboration with vendor via Portal?
Hi everyone :
I meet a problem about collaboration with vendor. Our customer has lots of vendor ,and our customer expect that their vendor could query related R/3 report real-time via Portal on Internet .
I had done the SSO between Portal and R/3, and the user who had Portal user and R/3 both could access R/3 via Portal easily. We can create user for vendor in Portal easily, but it is impossible that we create user for all of vendors in R/3 , because of R/3 user need to pay for license. So vendors could not query R/3 report via Portal now .
My problem :
1. Vendors can't query R/3 report via Portal now.
Is there anyone met this problem ever , and How to solve this problem ?
2.On the assumption that our vendor can query R/3 report via Portal now, how can we control the authorization that certain vendor could query his data only, can't query other vendor's data ?
Any advice and discuss is welcome!
Best Regards,
Jianguo Chen
Message was edited by: jianguo chen
Message was edited by: jianguo chenHi Brian
which datasource u r using?
i think u used read only LDAP + Databse
when u chang the password for user in portal than after corresponding user password in LDAP directory are not changed thas't why it's generated a message that
password expires and u can't change the password
so try to change the password in LDAP also.
hope it's helps u.
regards,
kaushal -
Materail recevice with referance to material document with mvt type 303
Hi Guru:
In MB1B we are creating mateiral document with movement type 303 from one plant to other plant.
Now same material we need to receive in other plant with movement type 305 in same T code Mb1B.
Now as per user requirement if there is number of item are coming in material document which is generate with movement type 303, why we need to give all material, qty, batch again in MB1B movement type 305,
while we are receving same material in plant.
In MB1B there is link to create material document with referance to material document but we can use this facility for creating new material document for movement type 303 of same mateiral, qty and batch.
Please suggest is there any way to use this 303 movement type material document with movement type 305.
Thanks.
Virendra
09887603301Hi
In my opinion in MB1B you can not have Material Doc. as a ref. Doc. for M.Type: 305...
But for MIGO transaction you can have Material doc. as a ref. doc. for M.Type: 305
Goto ---> OLME ---> Settings for Enjoy Transaction ---> Settings for Goods Movements -
> Settings for Transactions and Referance Documents ---> There...for MIGO_TR...Transfer Posting ---> Referance Documents ---> For your M.Type: 305 assign Material Document as a Referance Documnt...
Reward if useful
Regards
S.Baskaran
Maybe you are looking for
-
I am experiencing issue with my SharePoint site , when I am trying to add new Item in List . Error given below :--> 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace
-
Cannot install InDesign Trial on Mac (10.9.5)
Hi All For the past 2 days, I've lost count of how many times I've downloaded and re-downloaded a trial version of InDesign. All I wanted was a working 30-day trial, but it's turned out to be quite a nightmare. I wanted to at least get a trial, befor
-
Can another calendars events be integrated into a published web calendar?
Apologies in advance for my general ignorance about iCal. I am just starting to venture into the program. I am the web coordinator for a nonprofit group, and am intending to use iCal to publish a web calendar for our site. I have subscribed to the US
-
Open Ibook PDF's with adobe reader
How do I open a PDF document from the Ibooks library with adobe reader, so I can use all the tools like the highlighter?
-
Hi All, Can u please tell me wht is the Mercator Mapping with XI,Suggestions on this would be appreciate. Thanks pullarao.