SRM: Using Z-Configuration in Standardcomponent

Hello,
in SRM we want to change the Business Partner WebDynpro. There exists a standard Configuration /SAPSRM/WDCC_FPM_OIF_BUPA_SUPPL which I copied and changed it to our needs. But how do I apply this? When I open a Business Partner it still uses the Standardconfiguration. I don't find anything to change this.
Can you help me?
Kind regards,
Bastian Stritt

Hi,
Instead of copying the configuration, you chould create an enhancement to the configuration. The changes you do to the enhancement of the configuration will override the values in standard configuration.
Regards,
Prasanna

Similar Messages

  • SRM: Using Z Configuration in Standard component

    Hello Experts,
    I want to hide a colunm of a table hence i created my own z configuraiton . However during the applicaiton is called,the newly created "Z" configuraiton is never called. Instead stil the standard configuration is called.
    How can make my z configuraiton being called instead of the Standard?
    Please help.
    Thanking you,
    best Regards,
    Tamanna.

    Hello Tamanna,
    the reason probably is, that within the application configuration still the standard FPM component configuration is inside. When you create your own application configuration and enter there your own component configuration, it should work.
    Have you ever thought about using the administrator mode for your change? When you are doing this you will create a customizing for SAP delivered component configuration. Within the administrator mode you remove the column from the table and this change will have an effect on the application runtime for all users in this client.
    So you don't have to copy SAP's component configuration and the benefit of changes in admin mode is that e.g. new deliveries/updates from SAP to this standard component configuration are not lost.
    For a further look of enhancing/adapting SAP component configurations please have a look at this [document|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0a2b7c2-1598-2e10-45bc-c556df3b9576 ].
    Best regards,
    Julia

  • In Solution Manager, where can I find the SRM 7.0 Configuration Guide?

    Please give me directions on how to download the SRM 7.0 configuration guide within Solution Manager, these documents are not available on the service marketplace.  We have sol manager 4 I believe, it's not sol manger 7.0.
    Also, if you could send me the guide at matt.joseph at thq.com that would save me from losing more time trying to figure out Solution Manger
    Thanks for your help.
    Matt

    Matt,
    1. Log on to your SAP Solution Manager system.
    2. To be able to access configuration documentation, create a project as follows:
    1. Create your project with transaction SOLAR_PROJECT_ADMIN for project administration.
    2. Connect your SAP system to SAP Solution Manager with transaction SMSY for the SAP Solution Manager system landscape.
    3. Create a project structure and add the required scenarios for your SAP system to your project structure with the Business Blueprint transaction SOLAR01,
    4. Add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02.
    3. Go to the project structure folder <project name> using transaction SOLAR02.
    4. Access configuration documentation for SAP NetWeaver usage types at Configuration StructureSAP NetWeaver 7.0.
    5. Access configuration documentation for all areas of SAP SRM at Configuration StructureSAP SRM <release>.
    Nesimi

  • Use of Configuring "Stochastic Check of Documents"

    Hi All,
    I have a scenario I need to change the Invoice workflow at runtime based on some invoice document value......
    For this I have found a BADI BBP_STOCH_CUST_BADI.... this gets triggered only when we Configure "Define Stochastic Check of Documents" in SPRO   Supplier Relationship Management -> SRM Server -> Cross Application Basci Settings ->SAP Business Workflow -> Define Stochastic Check of Documents....
    This says that using this configuration you can change the approval workflow from standard one to the anyother workflow....Can anybody jus give focus when exactly this step can be configured so that I can make use of BADI?
    Or can suggest any other BADI which can be used to change the workflow based on the one of the invoice document value?
    Thanks In advance.
    Yaseen M

    The flag indicates whether field inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field. I.e. type n(2) is '00'.
    When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.

  • Problem to generate SRM 7.0 configuration guide into solman

    Hi gurus,
    We have a problem to generate SRM 7.0 configuration guide related to business scenario plan driven procurement with supplier collaboration into transaction SOLAR02.
    We are using Solution Manager 7.0 and when we execute the configuration guide download, the system starts dowloading some files and after that ask for us execute a ms word macro to generate the guide, but the ms word file generated is empty.
    Can anybody help me with this issue or tell me if there is another way to get the configuration guide we need?. Thanks in advance.
    Regards,
    Horacio

    Hello Horacio,
    You may want to check yuor MS Word Client Trust Center settings.
    Typically you should have "Enable all Macros" and "Trust Access to the VBA Project Object Model" Checked.
    I thought of this when you mentioned you were requested to run an MS Word Macro and it generated a blank file.
    Without these settings enabled, could be why a blank report is generated. So you may want to check these settings and, if they are not set, then it would be worthwhile to enable them and try to generate with the MS Word Macro again.
    Regards,
    Paul

  • How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration
    Just don't install the sample schemas. See the installation guide
    http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
    Using the Database Configuration Assistant
    When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
    Choose a custom install and don't install the sample schemas.
    All other schems/tables installed are REQUIRED by Oracle

  • Transaction code used to configure HTTP Adapter?.

    What transaction code we use to configure HTTP adaptor?.
    SMICM
    Is this correct?.

    Ash,
    Yes. Please see this weblog for some more help:
    /people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
    Just go this url and click the first one for HTTP adapter presentation:
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=http%20adapter&cat=sdn_all#
    Also check this threads:
    in SMICM-->How to Activate HTTP Services
    SMICM services
    ---Satish

  • What are the different types of bind that we can use to configure COREid?

    Hi
    What are the different types of LDAP bind that we can use to configure COREid?
    Thanks for your input.

    (http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
    7.5.2 Creating an LDAP Directory Server Profile

  • How can I distribute the free version of Numbers, Keynote, and Pages using Apple Configurator

    I am trying to use Apple Configurator to mamnge a set of classroom iPads.  I have figured out how to purchase apps via the VPP account and distribute them, but I can't figure out how to distribute the free versions of Pages, Numbers, and Keynote.  When I try downloading these apps on the Mac running Configurator, they show up as a paid version.  Currently, I have to disable the option in Configurator that removes non-mamanged apps and then install the apps manually on each iPad.  Does anyone have a better option than this.  My hope was to be able to completely manage the iPads by simply pugging them into the Mac.

    The apps is not only for iPhone 5c and 5s. its for all apple products that are purchased with iOS 7. I don't believe if you already have the product then update it to iOS 7 that the apps will be free. I believe that you have to purchase the product on or after the 18th since iOS 7 will already be on the products.
    Edit...All compatible iOS 7 products activated on or after September 1st, 2013 will recieve the iWork apps for free. So yes he/she will recieve the apps

  • How to create Image as Custom Property Type used in Configurable Web Part?

    I wanted to create custom configurable web part property for Image.
    Example - the screenshot of Image property used in Image web part is shown below:
    My goal is to create as many images as possible in custom configurable web part.
    I tried to write the code:
    [WebBrowsable(true),
    WebDisplayName("Example Photo"),
    WebDescription("Example Photo of the user"),
    Category("Custom User Profile"),
    Personalizable(PersonalizationScope.Shared)]
    public Image ExampleUserPhoto { get; set; }
    However, the result does not display Image configurable web part property.
    I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
    Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
    How can I create Image as Custom Property Type used in Configurable Web Part?

    I have examined that context node __00 has been enhanced,and  has a class name  z___00. But  when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still  a error message "view is not enhaced or copied with wizard".
    But  when  I created a method  "getvaliation "  in the class of context node zcl__00, the attribute  'valiation' automatically created(at the same time the method "getvaliation' automatically  created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard .  It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
    Do I need to make some configurations in  the business object layer  for the checkbox? but  the checkbox is only used as a flag  to decide whether a backgoud job is needed to be executed.
    Edited by: samhuman on Jun 22, 2010 10:31 AM

  • Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

    Hello,
    our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
    ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
    Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
    Thanks in advance.
    Regards,
    AEV

    Dear AEV,
    I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
    Best regards
    Rene

  • HT5927 Using apple configurator with supervised devises, enabling iCloud/ find my iOS device (after being supervised), backing up that supervised / find my iPhone enabled image, --issue; unable to apply back up to any iOS device (including the orign. devi

    Senario:
    Need to manage 500 Enterprise iPads
    Requirements;
    1) Trackable via Find my iOS device  (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
    2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
    3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
    4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
    Issue: Can not do any following senarios;
    A)
         1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
         2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
    B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
    Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
    According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
    Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.

    Hi all
    I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
    1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
    2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
    3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
    Any help would be greatly appreciated!

  • Trouble using apple configurator

    I have been trying to setup 20 iPads using Apple configurator for the last couple of days. I purchased all of my codes for each of the apps I want to install on the iPads. I have everything setup, but for some reason whenever I try to put the apps on the iPads using the codes through Apple configurator, I get an error saying that the code could not be redeemed and that I need to put my Apple ID and password in. I have authorized the computer with itunes and have done everything that I can think of, but I continue to get the same error. I am clearly missing something and any help would be greatly appreciated.

    Restarting Apple Configurator and/or redownloading and reimporting the VPP codes will often cure this issue.
    You should receive a pop up prompt, within Apple Configurator, asking you to sign in with your Apple ID* when trying to deploy apps that are using VPP codes to any iPads. Sometimes this prompt doesn't appear but disconnecting all the iPads and restarting Apple Configurator normally cures it.
    *This should be the Apple ID you used to download the app within iTunes before you imported the app into Apple Configurator - not the VPP account used to purchase the VPP codes.

  • Using iPads @ configurator in school with school AND personal iTunes accounts

    Hi all,
    My kids school has introduced a managed ipad program which includes most parents purchasing the iPads but still having them managed by the school.
    As we own these devices the kids take them home every day
    iPads are ipad 3 and above
    The school has setup configurator for mass deployments/ updates etc. and have the one iTunes account for all using vpp
    With the initial deployment we were able to install our own personal apps using our own personal iTunes account to install and update ourselves.
    There was no expectation that the school would manage these personally acquired accounts.
    In the last week the school has removed the App Store front the iPads effectively removing any ability we have to install our own personal apps.
    I have spoken with them and their stance is that it is too hard to manage updates because occasionally the iPads come back to the school logged in with the personal iTunes account
    Can anyone out there please share any experience/solution that they may have which will allow the iPads to be managed through configurator whilst still allowing us to install our personal apps?
    The school have said they will return our rights if a solution can be found.
    I am very surprised that this is not possible and seek the assistance of the community.
    I am based in Australia
    Thanks in advance

    Hi Rob,
    If the school is using Apple Configurator and have set the iPads to "Supervised" mode, it will prevent anyone from using their personal computers and iTunes to install apps or copy other data to/from the iPads to the personal computer. If the school has restricted the App Store on the iPad with a configuration profile, then they've made it impossible for you as a parent to install apps. (I'm surprised they did this being that these are personally owned iPads!)
    In our school district, we are set up with a "Layered Ownership" model that allow us to buy and install apps that were purchased by the district, as well as allow the kids to do the same with their own personal Apple IDs. We don't have the App Store locked down on the iPads. The kids or parents can log in to the App Store on the iPads and install whatever they want. Even if they are logged in with their own personal Apple ID, we can still install apps that we as a district purchase using an MDM.
    All of the app updates that we do for the apps that we have purchased are done though an MDM (mobile device management) server. There are many MDMs out there and perhaps your kid's school district could look in to using an MDM to manage their app distribution. There are a few different ways that MDMs have to distribute apps so your kid's school would want to talk to an MDM provider to see how they can help in your situation. We've been using an MDM in our school district for a year now and its been working great.
    Here's a list of MDMs that you could send to your kid's school:
    http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
    Hope this helps. Good luck to you!
    ~Joe

  • HT5188 I am using Apple Configurator and would like to put iMovie on our 30 iPads--need redemption codes?

    I am finally sucessfully using Apple Configurator. Our teachers would like to have iMovie on the iPads In order to use Apple Configurator I need to have redemption codes.  I am at a loss as to how to get these codes.  Any suggestions.

    You would be wanting VPP codes (volume purchasing plan).Here is where you want to go: http://www.apple.com/education/it/vpp/
    Enroll and setup which app or apps you want. After purchasing, apple will send you a vpp spreadsheet that you import into configurator. The guide at the site listed above will help.

Maybe you are looking for