SSD cache in hp 14-n201sf

Hi,
I'm a new owner of a 14-n201sf laptop and I would like to know if there is an ability to add a SSD as cache with mSata product or something like that.
I don't have any idea about extentions port (mSata? m2? none ?) inside my laptop, the user manual don't provide those answers.
Indeed I don't know either if a SSD will be used as cache or as new empty drive. Is it possible?
I think replacing the main hard drive by a SSD would break the warranty that's why I'm considering some cache solution.
Regards
This question was solved.
View Solution.

Hi,
Your machine is a "HP Pavilion 14-n201sf". Please check the following list first:
    http://www.mydigitaldiscount.com/msata-ssd-compatability-list.html
You can swap/replace the currnet HDD with a new SSD, they are very cheap now, 1 Tb for under $400.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Ssd cache performanc​e

    At this point I can only image it will help but I am trying to decide if sdd cache on the 450r is going to have a better return on performance versus a ssd drive for swap files on my VMware host. Soon to be multiple hosts.  This is not a production box but a replica site I have pieced together from some new hardware and old,.
    I would like to know if anyone has any performance metrics with ssd cache.  I am looking to get 2x256GB drives in a mirror.  This is a big project since I will have all my bays filled.  I would have to find a temp location for all my replicas break my raid and rebuild everything. I am not against it, I just want to know what I am looking at for percent of performance gains.  i know it will depend on what I plan on get setting cache policy to but I am planning on write around since most of our systems are read based. 
    Any info is appreciated. 
    Also let me know if you anyone is using iSCSI over NFS and why.  I have heard a lot about read being way faster with iSCSI but since I can't have multiple hosts on an iSCSI volume am stuck with NFS for now.

    I did try eSATA as well, the WD drive was able to do 150MB/s and 149MB/s, read and write respectively. (as the QM57 chipset natively supports SATA at 3Gb/s)
    The issue here is as part of the decision process to get the W510, USB 3 capability came into consideration (for having more than 1 fast external storage device).
    EDIT:
    Ultimately, what I'm really after is:
    1. Have I configured something incorrectly, or misconfigured something.  Or is there's some ideal component linkage I'm missing.
    2. Is the W510's USB 3.0, at the very least, capable of delivering 2.5GT/s?
    3. I may, or may not have to file a complaint to Lenovo or BBB for misleading marketing / sales info.
    2nd EDIT:
    I do thank you for suggesting eSATA.  However, if Lenovo is going to reply to this, I simply won't take "use the touchpad instead" if the trackpoint isn't working properly.

  • SSD Cache Not Working U840 after Clean Install Intel Smart Response Technology

    Hello, I completed a clean install of Windows 8 on my ultrabook model U840 (Core i3, 16GB SSD).  I would appreciate any advice to get the SSD to use the Intel Smart Response Technology (SRT) for SSD Cache.
    I used the Intel Rapid Storage Technology (RST) driver during install and after installing Windows 8 but I do not recieve the option to Accelerate the SSD drive.  I followed the instructions and links contained in this Toshiba Forum post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=277914
    The computer is supported for Windows 8 upgrade and clean install drivers are available at Toshiba: http://support.toshiba-tie.co.jp/windows8/drivers_cae.htm
    The BIOS is set to default for the drives (Performance). Any advice is appreciated.  Thanks.
    - Red
    Solved!
    Go to Solution.

    If anyone stumbles upon this problem in 2015, i have detailed my solution here
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=81644&tstart=0
    I used a somewhat abbreviated version of this guide myslef, and did have some trial and errors
    http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide.pdf
    I urge you to at least read my post in the other Toshiba forum for a fuller grasp and overview, but I have also attached the two Intel website and PDF links for you.
    Keep in mind that there are seemingly two types or Intel Rapid Cache type options. Follow the instructions in the intel link and one of them will work for you. (I hope it does work for you because i know how frustrating this issue is) 
    Cheers and Best of luck
    Shane 
    Attachments:
    download.intel.com_support_motherboards_desktop_sb_rapid_start_technology_user_guide.pdf ‏349 KB
    Chipset Software — Intel® Smart Response Technology User Guide.pdf ‏506 KB
    Windows 8 Upgrade_ Items that may result in a loss_limitation of features_functionality after upgrading to Windows 8.pdf ‏191 KB
    download.intel.com_support_motherboards_desktop_sb_rapid_start_technology_user_guide.pdf ‏349 KB

  • SSD cache on windows 8.1

    Hi, I do have windows 8.1 update 1 on my lenovo thinkpad edge e540 (20C6003QMC) which has 16GB SSD cache and I'd like to ask since express cache is not supported on windows 8.x how can i get it working? Thanks

    Okay, I got mine to install.
    Under the Start menu it showed iCloud 3.1 as still being installed although it doesn't show up in the add / remove programs.  So what I decided to do was manually uninstall it.  I found the directory where iCloud was installed, which in my case was:
    c:\program files (x86)\Common Files\Apple
    Close out iCloud if it's still running in the taskbar, I used the Task Manager to close it.
    I renamed the Apple folder to Apple.bak and then closed out explorer.  I re-ran the iCloud 4.x install program and it went through the entire installation without fail this time.  After which it'll prompt for you to reboot once the installation completes.

  • Ssd cache and hybrid drive

    I am looking to order the HP 17t-j000 with 8GB of memory.  It offers both SSD cache and a Hybrid drive as options, and you can choose both.    Does it make sense to get both, or is this just redundant?   I

    No the SSD cache drive with hybrid drive will outperform just the hybrid drive by quite a bit. You will get boot time performance close to a main SSD drive, but a main SSD drive would be even faster, particularly on data transfer.

  • SSD Cache in HP ENVY Phoenix 800-445qe doesn't seem to be installed right

    I have a newly purchased HP ENVY Phoenix 800-445qe which includes what's supposed to be a 16gb ssd cache.  Running WIndows 7 Pro 64.  
    The ssd drive was factory installed so it shows in Windows as with the name DATADRIVE1 (doesn't sound like it was intended as a cache, does it?) and it shows as drive E:. My understanding is that if it were really installed as a cache, it wouldn't be showing as a drive in Windows Explorer.
    The HDD was set as ACHI in BIOS, not RAID.  The Intel RST screen in firmware (accessable through Ctrl-I) shows both drives as non-RAID Disks.  The HP support assistant shows the Intel RST x 64 driver v 13.2.0.1016 installed. 
    Elsewhere on the HP site is a support article with the title: A Seondary 16 GB Drive Shows up in Windows 8 File Explorer, which is the problem I'm having except, I have Win 7, not 8; it says to download a softpaq with release notes that say it only applies to HP ENVY HP-8 systems and requires Win 8; it's fix is to install Condusiv ExpressCache, which I'm under the impression is an alternative to Intel's RST, not something that works with it.  So that doesn't seem to be the fix I'm looking for.  HP Tech Support's helpful suggestion was to find a local computer dealer an pay them to fix it. (Yeah, right.)
    Does anybody here know how to get this thing working?

    There ain't no such thing in the Control Panel.  *sigh*  
    Let me jump off in a very different direction, because as this point I've probably wasted more time on this than the cache can ever save me over the life of the system....
    I have a 128GB SSD on order that I was going to install as my data drive, and then keep it backed up on a partition on the HDD.  That's almost twice as large as my OS+Programs partition on my current XP machine.  I'm thinking maybe I should bail on the whole cache thing, install the 128GB drive as my OS+Programs drive, and set up the 16 GBs as a data drive (since it seems to be set up that way already anyway.  That's a little small, but I can make it work if I move older data files to the HDD as a kind of near line storage.
    Unless you know of a reason I can't do that--like the mSATA SSD won't work as a drive--the question then becomes, how do I set up the 128GB SSD as the OS drive?  I see two possibilities:
    The first would be to use the HP restore image function to initialize the SSD, so it has the EFI partition with the Boot information, and then use Norton Ghost to restore the Ghost image I've created from my now customized Drive C (removing bloatware etc) to the new SSD.  
    The second--which could be a lot easier-- would be to make a ghost image of the entire drive of the current HDD and then use Ghost to restore the image to the 128GB SSD. 
    Do you know if either or both of these approaches will work?

  • SSD CACHE T540p Как лучше использова​ть?

    Подскажите как лучше использовать SSD Cache 15Gb в ноутбуке Thinkpad t540p?
    Пока удалось добиться только создав динамический раздел и отдав его ReadyBoost. Хотелось бы использовать его с технологией Intel Rapid Storage, но для этого необходимо объеденить этот кэш с HDD в RAID, но в bios такой настройки нет ( bios обновлял), Подскажите как это сделать?
    Может есть еще варианты использования этого SSD Cache (установку ОС на него не предлагать)
    Windows 7 PRO

    Приветствую
    1. Этот диск можно использовать по прямому назначению, в качестве кэширующего.
    ПО:
    http://support.lenovo.com/us/en/products/laptops-a​nd-netbooks/thinkpad-t-series-laptops/thinkpad-t54​...
    2. Можно использовать диск исключительно для размещения раздела гибернации (одна команда с пом.diskpart). Либо совместно - раздел гибернации и ReadyBoost, создав два раздела
    3. можно заменить диск на более емкий, формфактора m.2 22x42 mm, и использовать его либо как системный, либо как дополнительный диск.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Monitor SSD cache utilization

    Hello, I would like to know how I can monitor (or at least view with powerhsell) the usage of ssd cache in my storage space.
    I've created a storage space with 1.7TB of SAS (array controller raid 5) and 400GB of SSD storage (Array Controller RAID1) and used powershell to create a 1 TB virtual disk with 150GB of Read and 5gb of write ssd Cache.
    Is there a way to view cache utilization? I would like to know to so we can determine proper cache sizes for highly stressed volumes (hyper-v or other hypervisor with 10gbit connection to storage server)
    best regards,
    http://www.micral.nl

    Hi,
    Currently I cannot find a command line for display the used cache.
    Get-FileStorageTier could help gets the pinned files, and following 2 commands could help list the total cache size:
    Get-VirtualDisk –FriendlyName "<friendlyname>" |  Select-Object WriteCacheSize
    Get-VirtualDisk | Select-Object FriendlyName, Size,  WriteCacheSize
    If there is any update I'll added in reply.
    If you have any feedback on our support, please send to [email protected]

  • Adding SSD cache to Envy 4t-1000

    Hello, a couple months ago I purchased an Envy 4t-1000 laptop, I have since then installed an additional 4GB of RAM and have began to wonder wether it would be possible to add an SSD (in addition to my current Hard drive). I know Envy laptops can be configured to include such an SSD cache when purchased directly from HP but would it be possible for me to add it myself? Also, does anyone know the specifics (i.e. size) of the SSDs used on 4t-1000s? Thank you for any help.

    See the solution here for some help and yes you may do it your self.
     http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/New-HP-M7-How-to/td-p/1729315
     Laptop hard drivers are pretty much a standard size of 2.5 inches. Some of the larger ones are thicker because they contain more platters, but when dealing with and SSD that doesn't really apply here any way.
     Post in this thread if you have any questions.
     The SSD is put in place of the standard drive and your old one can be then used a storage in the secondary bay.
     If you buy the drive from HP chances are that it will come with the caddy and cable.
     If you purchase a retail one you will then have to buy a caddy and cable. If you need help with this I will need your full model number.

  • Disable SSD cache in Windows on W540?

    I just received my W540, which came with the micro SSD cache drive. I'm dual booting my machine with Linux, and intend to use the micro SSD with the bcache Linux kernel module, which assumes it has exclusive use of the cache device, even through reboots. I thus need to make sure Windows doesn't use the cache device (which is fine, since I won't use Windows most of the time anyway).
    What must I do to ensure Windows doesn't touch the micro SSD?

    Just uninstall ExpressCache in Windows, and then reformat the mSATA.
    You can uninstall it in "Programs and Features", which is found in the "Control Panel".
    Or right-click the start orb of Windows 8.1, and select "Programs and Features".
    Jonas
    Microsoft MVP: Windows Consumer Expert
    Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
    Twitter: @jonashendrickx

  • X240 - SSD Cache M.2

    I ordered an X240 with a 16 GB SSD Cache drive.  Already, I am having a problem with it.  It is saying when I turn the machine on that there is a problem.  What I'd like to do is to just remove it and restore my HDD with an image I took.  However, when I take the bottom of the machine off...I can't find the SSD.  Anyone know where it lives?
    I found this online --> http://support.lenovo.com/en_US/detail.page?DocID=PD028910
    But when I look in that spot, I don't see anything.  Very confused.

    Regarding the error, it is:
    2102  Detection error on SSD2 (M.2)
    It had been working prior.  
    Here is the picture of inside the case.  If you look in the spot that the manual says the SSD should be, I can't find it.  Based on the instructions, it should be right where the red and blue wires are.  
    I have mulitple of these machines and I opened a few up. Same issue with all of them.  I can't find the SSD.  The reason I am wanting to remove it is two-fold 1) the issue with it not working 2) now that I have it, the imaging process is a bit of a mess.  Not sure I want to deal with it.
    Link to image
    Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

  • Intel Z68 Sandy Bridge chipset and SSD caching....

    For those of us considering a move to the Sandy Bridge/Z68 platform, we will eventually need to sort out whether to take advantage of the chipset's ability to "improve" ONE hard drive with a smallish (64GB or less) SSD.
    Results I have seen indicate read speeds considerably slower than an SSD drive alone but acceptably improved performance over a bare hard drive. It seems like a promising situation. Capacity of a TB hard drive with read speeds nicely bumped upwards.
    http://www.tomshardware.com/reviews/z68-express-lucidlogix-virtu-ssd-caching,2888.html
    Question: If a user followed Harm's and other's suggestions in setting up a basic 3- or 4-drive computer, which drive should take the cheapo SSD?
    Thoughts:
    1) Assume the Z68 platform is loaded with all 16GB of memory that the four-slot Socket 1155 motherboard can typically accept. Would CS5 or 5.5 load enough program data into RAM to render placing the SSD on the OS drive for editing with Premiere minimally beneficial? Or would it simply make sense to put the SSD on the OS drive for so many other reasons that it's a no-brainer?
    2) If it's a close call, which other drive should get the SSD? If I understand correctly, this hybrid drive won't write data all that much better. The improvement will primarily be on reads. And on that, random access reads, not sustained throughput. This is especially the case with cheaper 40GB-ish SSD's. (Some one please verify this.) Most Sandy Bridge users opting for the lower end, 20 PCI-e lanes platform won't be big-time power users. (You guys are waiting for the Socket 2011 platform.) Many of us will be getting our footage from DSLR or other AVCHD sources. AVCHD is so compressed that a single drive can supply more than enough layers for the Joe Blow amateur editor.
    Unless we use Cineform NeoScene to lighten the load on the CPU, which will result in a much larger bitstream coming off the media drive for each layer, Would it make sense to help out a single drive in this situation? Or would it be universally better to set up a simple 2-disk RAID 0? Paying $65 for second drive and taking advantage of motherboard RAID 0 would seem to be a better solution if the media drive can't keep up.
    For any situation, if the media drive(s) is already fast enough, would caching the media drive offer many benefits? I'm under the impression that feeding Premiere with footage is a sequential read situation, not a random access deal. Isn't the strength of an SSD in random access reads, and wouldn't the best usage be to place it on a disk that primarily is used by Premiere in random access data fetching?
    3) Good grief. If it doesn't go on the OS or primary media drive supplying footage, where else? Projects disk? Scratch drive?
    4) Might the most useful thing be to avoid setting up a RAID while getting some of the speed benefits a RAID 0 offers? Many casual users can build a straightforward computer but have never set up a RAID array, even a 2-disk RAID 0.
    40GB SSD's are under $100 now. I suspect a lot of people will use this feature of the Z68, if the hybrid drive isn't hard to set up and is reliable. I'm curious how the Premiere crowd will make use of this feature, and will it make a palpable difference on a relatively simple editing rig? No Areca RAID cards and only 16GB memory. Nothing more than 3 or 4 single drives.

    Frankly I don't see how an inexpensive SSD would help the "caching" for editing with Premiere CS5, since a typical 7200 rpm 1TB drive can perform substained writes at about 2x what a typical small SSD does.
    Premiere CS5 continues to beg for lots of drives!
    Jim
    (one of the few "believers" in SSDs on this forum - and my "belief" is for OS and programs, not for input, media, caching, etc.)

  • How should a SSD cache be partitioned upon installation?

    I know there are various wiki pages for creating a bcache, but none of them seem to go into detail about how they should initially be partitioned.
    In my case, lsblk shows an sda partition (1 and 2) which is my live USB stick, a sdb partition which is my SSD cache, and a sdc (1 and 2) which is my machines main HD partition.
    Do I need to clean my SSD partition or should I just leave it alone? The wikis don't seem to address the situation as if the user has yet to install arch yet.

    vixsomnis wrote:If you're still stuck on this, use $(wipefs -a /dev/sdbX) on the partition, then use $(make-bcache --wipe-bcache -C /dev/sdbX). There's nothing in the wiki about this, but the tool itself provides some help when it encounters an error.
    Alternatively, you could try to use the Security Erase feature of the SSD if it supports it.  This will effectively zero out the entire drive.  Then you can go back and try getting bcache working again and not have to worry about lingering superblocks from old filesystems.
    https://wiki.archlinux.org/index.php/SS … l_clearing
    I like to use this when I need to clear out an SSD because it tends to be super fast.  It is also amazingly easy to use as well (you just need hdparm).

  • L530 - Correct set up for 16GB mSATA SSD Cache + 500GB HDD

    Hello,
    I'm a bit confused about optimal/correct set up for L530 ThinkPad equipped with 16GB mSATA SSD cache drive and 500GB HDD. ExpressCache is installed and works properly.
    - Should I disable RapidBoot Shield in CP?
    - Should I uninstall (or disable at start up) RapidBoot HDD Accelerator (FastBoot)?
    Please advise.
    Thanks.
    Ned
    OS: Win 7 Pro 64

    yes you should remove the rapidboot related softwares.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • E540 SSD caching - how to make it work

    Hello. Does anyone know how can I rebuild E540 SSD caching? The problem is, that I formatted the whole notebook (1TB HDD + 16 GB SSD) and now after fresh install of Windows 8.1 it doesn't seem to use the 16 GB SSD as cache. I installed Intel Rapid Storage, but I can't install Intel Smart Response (which seems to do the SSD-caching) because it needs the RAID to be enable in BIOS but I don't have such an option. Any idea how to make it work?
    Thanks in advance!

    ColonelONeill wrote:
    I think you need the ExpressCache package.
    Well that seems to do the trick. The quiestion is  - why? On lenovo expresscache download page (http://support.lenovo.com/en/downloads/ds035460) my model (E540) isn't listed in the supported models. That's why I didn't even try it. Although I was considering this until I saw, that my model is not supported.

Maybe you are looking for