SSD-problem with MacBook Pro 13" (Early 2011)

Hi there,
I've tried to use two different SSDs in my MacBook Pro 13" (early 2011). The first one (Samsung 840 Series, 500GB) crashed after two days: the beachball appeared and after a restart there was this question mark-symbol on my screen: no system found. Had to send this SSD back to Amazon. A few days later I've bought a new one, a SanDisk Extreme with 450GB. I've used it for two days, then my system crashed again and after a restart of my Mac I couldn't get any further than to the grey apple-symbol. Even the recovery partition didn't work anymore. Does anyone of you have the same problem with his (or her) MacBook Pro 13" (early 2011) - and any ideas for a solution?
Thanks for your answers!
Torsten

can you confirm if this is ok to buy:
http://www.ebay.ca/itm/New-HDD-Hard-Drvie-Cable-for-13-MacBook-Pro-A1278-MD101-M D102-821-1480-A-2012-/181269577616?pt=LH_DefaultDomain_0&hash=item2a34823f90&_u h b=1
or
http://www.ebay.ca/itm/NEW-MacBook-Pro-Unibody-13-A1278-2012-md101-102-HDD-Hard- Drvie-Cable-821-1480-A-/121183868039?pt=LH_DefaultDomain_0&hash=item1c371f1487& _ uhb=1
or this one..??
http://www.ebay.ca/itm/for-APPLE-MacBook-Pro-13-A1278-HDD-Hard-Drvie-Cable-MD101 -MD102-821-1480-A-2012-/331060187298?pt=LH_DefaultDomain_0&hash=item4d14b990a2& _ uhb=1
i guess i aint gotta buy those brackets again..?
Thanks
Anjillan

Similar Messages

Problem with macbook pro keyboard - MID 2011

Hi all, I have problems with my macbook pro keyboard.
I have several keyboard letter that bother me, the letters are e,y,d,h,c & n
When I hit letter 'e', it will come out as 'ey'..
When I hit letter 'y', it will come out as 'ey'..
When I hit letter 'd', it will come out as 'dh'..
When I hit letter 'h', it will come out as 'dh'..
When I hit letter 'c', it will come out as 'cn'..
When I hit letter 'n', it will come out as 'cn'..
please help me out..?

If it turns out to be a hardware problem with the keyboard and the repair is done through Apple, be prepared for a sticker-shock price to fix it. The problem is that Apple considers the keyboard as an integral part of the top-half of the aluminun enclosure (it's called the top case & is CNC milled and quite complex)...to Apple, it is considered one-piece and one part number (top case). The keyboard is held onto the top case with many (~60) very tiny screws and this entire top case is the part that will be replaced. They will NOT replace only the keyboard.
I had the power button quit on my Late 2011 MacBook Pro 13". To fix it through Apple would've cost well over $500. The power button is part of the keyboard assembly (it's not removable from the keyboard and uses the same flex cable assembly) so the keyboard itself needs to be changed. I found the exact replacement keyboard on eBay for ~$30 and changed it myself. There is absolutely nothing trivial about replacing it. It was a huge pain in the butt, especially swapping the keyboard on the top case with all of those teenie-tiny screws. It took me the better part of a day to do it but I've had experience with this type of work for at least 20 years now. If I need to do it again for some reason, it will likely be quicker.
Just beware that a repair could cost some big bucks, even if it's only "just the keyboard".

External Display not working with MacBook Pro 13" (early 2011)

I just bought the current MacBook Pro 13" (i7 processor). My external display (Benq 20"W, 1600x1050) always says "No Signal Detected!". I've tried it with a DVI-Adapter (Griffin Video Display Converter) and with a VGA-Adapter (LMP Mini DisplayPort-VGA-Adapter). With lower resolution I once got a picture (but with weird lines). On my old MacBook (white, 2.16 Ghz) there was never a problem with this display (also OS X 10.6.6). Who can help?

Check this post if you want more info:
http://discussions.apple.com/thread.jspa?threadID=2774718
The gist is that DVI is currently very iffy through Thunderbolt. Mini display -> mini display OR mini display -> HDMI should work fine. It's most likely not your adapter itself but the fact that it's DVI.
If you can, get a mini display -> HDMI adapter and try that (assuming your external has HDMI).
I should hear back tomorrow or Monday from apple engineers with more specific info about this issue and I will update then.
BTW- DVI anywhere in the chain will make things fail. Mini Display -> DVI and a DVI/HDMI cable won't work with any reliability (I've tested it on three completely different monitors).

When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

help! i've googled around, but none seems to solve my problem
my macbook pro is early 2011, 13", running lion.
the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
the screen on my mbp does turn blue, but no input is detected on the external monitor.
any advice?

If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

Problems With Hardware Macbook Pro 13" Early 2011

Dear Mac-Friends,
My product is a Macbook Pro 13" Early 2011, runing a OS X 10.7.5.
Problems I am facing are:
1. Completly crash: with no explanation appears some patches of collored pixels all over the screen and the computer starts making a "Beep" (Then I need to manually re-start the Macbook). Some friends said it look like a "memory pouring".
2. Mac Crash: it appears that black screen saying: "You need to restart your computer, please press the power button).
Both problemas start happening since I recently changed it's ram memory. I took the 2 x 2GB original, replacing for a Kingston 2 x 4GB 1333MHz DDR3, following the instructions in the guide.
So far both problems happen when I am working (maximum time I have worked with no crash was something like 3 hours).
Concerned with my situation I have looked for help in the web and most people say I have to make a Hardware Test. But I am trying really hard to this the Hardware Test (I tried holding "D", holding "Option + D", holding "Alt + D" in many ways that you can imagine, but could not run the Hardware Test, and no problem message was shown).
I have already read the article in Mac Support Community about "Hardware Test" and I tried to install the EFI update for Macbook Pro 13" Early 2011, but says "This software is not compatible with your computer". So weird!
Would anybody help me please?
Thank you very much in advance.
Best to you all!

Hey friend.
The software Rember says: It's not compatible with my OSx.
This is the crash report:
Interval Since Last Panic Report: 40181 sec
Panics Since Last Report:          1
Anonymous UUID: DA567D70-8641-42CB-A7BE-29998F2FD508
Thu Apr 18 15:12:18 2013
panic(cpu 3 caller 0xffffff80002c4794): Kernel trap at 0xffffff800026ae60, type 6=invalid opcode, registers:
CR0: 0x0000000080010033, CR2: 0x0000000007e24000, CR3: 0x0000000193f9f053, CR4: 0x00000000000606e0
RAX: 0x0000000000000004, RBX: 0xffffff801ee6a3e0, RCX: 0x0000000000000005, RDX: 0x00000000001a28cd
RSP: 0xffffff80f0ef3cc8, RBP: 0x00000000ffffff44, RSI: 0x000000002231db52, RDI: 0xffffff80036f6460
R8: 0xffffff80008bd560, R9: 0x00000000fb275557, R10: 0x0000000007e58000, R11: 0xffffff80002dad00
R12: 0x0000000000000006, R13: 0x0000000000000000, R14: 0xffffff8009e6b460, R15: 0x0000000000000000
RFL: 0x0000000000010206, RIP: 0xffffff800026ae60, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000007e24000, Error code: 0x0000000000000000, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80f0ef3970 : 0xffffff8000220792
0xffffff80f0ef39f0 : 0xffffff80002c4794
0xffffff80f0ef3ba0 : 0xffffff80002da55d
0xffffff80f0ef3bc0 : 0xffffff800026ae60
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xffffff44
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 39330809944560
last loaded kext at 29693531183383: com.apple.driver.AppleUSBCDC            4.1.22 (addr 0xffffff7f80839000, size 16384)
last unloaded kext at 29882841748291: com.apple.driver.AppleUSBCDC         4.1.22 (addr 0xffffff7f80839000, size 12288)
loaded kexts:
com.microsoft.driver.MicrosoftMouseUSB   7.1
com.microsoft.driver.MicrosoftMouse          7.1
foo.tap   1.0
foo.tun   1.0
com.rim.driver.BlackBerryUSBDriverInt     0.0.74
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.IOBluetoothSCOAudioDriver         4.0.8f17
com.apple.driver.IOBluetoothA2DPAudioDriver       4.0.8f17
com.apple.driver.AppleMikeyHIDDriver      122
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver            2.2.5a5
com.apple.driver.AudioAUUC       1.59
com.apple.driver.AGPM   100.12.75
com.apple.driver.AppleIntelHD3000Graphics            7.3.2
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC            5.0.0d8
com.apple.iokit.IOUserEthernet      1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver   1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl         1.0.33
com.apple.driver.BroadcomUSBBluetoothHCIController        4.0.8f17
com.apple.driver.AppleUSBTCButtons       227.6
com.apple.driver.AppleUSBTCKeyboard     227.6
com.apple.driver.AppleIRController            312
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless   1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib        1.0.0d1
com.apple.BootCache       33
com.apple.driver.XsanFilter           404
com.apple.iokit.IOAHCISerialATAPI         2.0.3
com.apple.iokit.IOAHCIBlockStorage         2.1.0
com.apple.driver.AirPort.Brcm4331            561.7.22
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleSmartBatteryManager            161.0.0
com.apple.driver.AppleSDXC        1.2.2
com.apple.iokit.AppleBCM5701Ethernet     3.2.4b8
com.apple.driver.AppleEFINVRAM           1.6.1
com.apple.driver.AppleAHCIPort   2.3.1
com.apple.driver.AppleFWOHCI   4.9.0
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET        1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC     1.5
com.apple.driver.AppleAPIC         1.6
com.apple.driver.AppleIntelCPUPowerManagementClient      195.0.0
com.apple.nke.applicationfirewall   3.2.30
com.apple.security.quarantine        1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement   195.0.0
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib        2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily     10.0.5
com.apple.iokit.IOAudioFamily     1.8.6fc18
com.apple.kext.OSvKernDSPLib   1.3
com.apple.iokit.IOFireWireIP        2.2.5
com.apple.driver.AppleHDAController        2.2.5a5
com.apple.iokit.IOHDAFamily      2.2.5a5
com.apple.driver.AppleGraphicsControl       3.1.33
com.apple.driver.AppleSMC         3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily   5.1.1d6
com.apple.driver.AppleBacklightExpert       1.0.4
com.apple.iokit.IONDRVSupport   2.3.4
com.apple.driver.AppleSMBusController     1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB            7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily            4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter       1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily            1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter            1.2.5
com.apple.driver.AppleUSBMultitouch       230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub        5.1.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice           3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily        1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.driver.CoreStorage        182.13
com.apple.driver.AppleThunderboltNHI      1.6.0
com.apple.iokit.IOThunderboltFamily        2.0.3
com.apple.iokit.IO80211Family     420.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOEthernetAVBController   1.0.1b1
com.apple.iokit.IONetworkingFamily         2.1
com.apple.iokit.IOAHCIFamily     2.0.8
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.driver.AppleEFIRuntime            1.6.1
com.apple.iokit.IOHIDFamily       1.7.1
com.apple.iokit.IOSMBusFamily   1.1
com.apple.security.sandbox           177.9
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages         331.7
com.apple.driver.AppleKeyStore    28.18
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.driver.AppleUSBComposite       5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice       3.2.1
com.apple.iokit.IOStorageFamily   1.7.2
com.apple.iokit.IOSCSIArchitectureModelFamily     3.2.1
com.apple.iokit.IOUSBFamily      5.1.0
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily        2.7
com.apple.iokit.IOACPIFamily     1.4

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

MacBook Pro 17" Early 2011 Model: Auto Shutdown/Restart Problem

Hey guys!
This is my first time to sign in, join the community, and ask a question or create a discussion. FYI, I really have little knowledge on tech stuff so please bear with me. Here's my problem, and I hope you can give out your suggestions:
I have a MacBook Pro 17" Early 2011 Model which I have upgraded to OS X Mountain Lion.
A month or two ago, it had started shutting down or restarting at random times. As time passed, this problem became more frequent.
I finally decided to have it checked at Digital Hub, a licensed Apple distributor. After almost a week, they've finally diagnosed that the problem is with my battery. I got my MacBook pro back around 2 (two) weeks ago, and ever since then I had to use an outlet in order for it and myself to work properly. Right now, I'm still saving up to purchase new batteries.
Recently, however, I've noticed that my MacBook Pro auto restarts even when plugged. Take note, RESTART and no longer shutting down completely. Upon further trials, I've finally concluded that it does so only during the use of heavy programs such as Diablo 3, Final Cut Pro X, and when rendering with iMovie. I have yet to try with Adobe products, particularly with Lightroom and Photoshop, and see if it does the same. But more or less, that's what I've noticed so far.
Given that I still haven't purchased the battery yet, I know it's still vague to know the real probelm/solution. But with the given situations, what are you views on this matter? Please let me know. It'd be of great help. Thank you and I hope to hear from you soon!
Brent Hughldridge A. Chua
Multimedia Arts Student
Philippines
(Note, I'm a starting out Multimedia Arts Student and photographer. I have little knowledge of the industry for now, but I'm willing to learn. So please forgive me if I don't understand your suggestions at once if they are very in depth or technical.)

Thanks for taking so much time in helping me.
Just an update:
2 loops/passes done - no errors.
Called up Digital Hub and talked to the technician, he says there are 3 possible problems:
1. Battery (which is still inside the laptop) may cause some disturbances with the electric current
2. Software related - most likely re-formatting may be needed
3. Video card may have failed, which means complete change of the logic board ----> worst case
I'm crossing my fingers that it's either of the first two.

MacBook Pro 13" Early 2011 Backlight Keyboard Not Working?! Software Problem...

So my "MacBook Pro 13" Early 2011" backlight keyboard hasn't been working. I have tried LabTick today, doesn't fix anything. Even in high or low lighting situations (dispite the Adjust keyboard brightness in low light being off) doesn't like to go on. It doesn't give me a circle with a cross like it does with that box checked in day light. It shows on the screen the
16 dots fully light after hitting F6 fully, just it doesn't light up. I one time had to reset my Mac OS at the Apple Store, it fixed the problem, but when I restored with a time machine backup, it went back to this software problem. How can I fix this?! What is wrong with my OS? Mountain Lion? How can I fix this?!

If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

Severe wireless problems; MacBook Pro 13inch Early 2011

I just installed updates on my MacBook Pro 13inch early 2011. I now have severe problems with my wireless. What can I do to undo the updates? One of them was a firmare update.

There is generally no need to undo the Updates, just Re-Do your wireless setup:
System Preferences > Netowrk > WiFi > ( Assist Me ) ...
... Assistant.
Be sure to specify a new Location.

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

Hello Alex,
It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I want to upgrade the ram on my macbook pro 13inch (early 2011). i found an 8Gb (4Gb x2) PNY "mac compatible" that is DDR3 PC3-10666 but my macbook is a PC3-10600. Do i need to use a ram with the exact specifications that my macbook lists?

i want to upgrade the ram on my macbook pro 13inch (early 2011). i found an 8Gb (4Gb x2) PNY "mac compatible" that is DDR3 PC3-10666 but my macbook is a PC3-10600. Do i need to use a ram with the exact specifications that my macbook lists? Or will the ram i am trying to buy work fine?

Yes that is your best bet. Without looking at it too closely double check your options here:
OWC http://www.macsales.com/
or Crucial http://www.crucial.com/

Does Macbook Pro 13" early 2011 support SATA III 6,0Gbit/s ssd disks?

Can someone please tell if Macbook Pro 13" early 2011 support SATA III 6,0Gbit/s ssd disks?
If it do, I will order it today =)

See posts from MacRS4 in this thread:
http://discussions.apple.com/thread.jspa?messageID=13129019&#13129019

Crucial SSD won't mount on my Macbook Pro 13" early 2011

Hi, a brand new Crucial SSD in a brand new 2.5" USB3 enclosure won't mount on my Macbook Pro 13" early 2011.
Any help would be appreciated, thanks

Try different USB cables.
Try a different enclosure.
Try all USB ports.
Try it on another Mac.
Is no success, the SSD may be DOA.
Ciao.

I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

It mostly depends on the damage that was done (the LCD, keyboard, etc) but yours does not turn on so I am assuming it was fully submerged and completely damaged. Therefore, I would think your warranty is most definitely void.
When did this happen? How bad was it? Have you taken any measures to get it to dry? You can go online and you can find tips on how to dry it at least a bit so that it is not as bad, it might not get it to work, but it can help you prevent rusting, which would cause further damage thus reducing the probability of getting repaired/replaced. Also, do not try to turn it on unless you have tried to dry it as it will damage it even more (electricity + water = destruction). I would suggest giving this a try, and if it is still not working then it is probably worth a try with Apple, just go in for a consultation in terms of pricing. If they seem too high and/or the warranty is void, then you can opt for after-market products which significantly reduce the repair costs... as you would have nothing to lose anyway in terms of warranty.
It's $3,000, that pays my rent. Even investing $1,000 would be better than just not giving it a try at all lol.

Does my macbook pro 13" early 2011 will be compatible with 2560x1440 thunderbolt screen resolution?

I'm planning to buy a Thunderbolt display for my macbook pro 13" early 2011,
I want to know if after connect the laptop to the screen, will show in 2560x1440 resolution
Thanks for your help!

Specs say:
External Resolution
Up to 2560 by 1600 pixels

SSD-problem with MacBook Pro 13" (Early 2011)

Similar Messages

Maybe you are looking for