SSD showing in bios but not during windows fresh install.
Hello all,
Currently I built a new computer.
I-5 4760k
8gigs Cosiar Vengance
750 watt power supply
MSI g45 gaming mobo
GTX 770
I'm trying to use the computer off a new Samsung evo 120. I want to do a fresh install of windows 7 on it. The bios picks it up, but it's not an option to install when I try to do a fresh install of windows 7.. Kind of at a loss here of what to do, is there an option on the mobo I need to set in order for it to be detected?
Sounds one of the following problems:
1.) The drive is formatted MBR w/ win 8 features enabled / legacy disabled.
2.) A "dynamic" drive is present.
Similar Messages
-
P67A-GD65 B3 Overclocked In Bios But Not In Windows?
Just got this board last week with a I5-2500. I overclock it manually to 4ghz and it seems to take in the bios. Shows 4ghz. But when I boot into Windows7 using CPU-Z it show 3.8? I disabled the power saving stuff thinking that is the problem but no go. Can't get Windows to see it above 3.8
Nothing wrong with a solid 3.8. In the days of the P7N Diamond, I would have tried a cartwheel with a handstand finish to get a stable 3.8.
-
LENOVO U310, windows 7, SSD drive showing in bios but not in the disk management
Hi,
I recently installed windows 7.
But after installing I found out the the computer is not waking from sleep. When I enter the password and press enter the screen becomes blank. I have to again restart the system.
Doing some googling I found out that SSD drive does the caching when iRST is used.
So I tried to look for SSD in the Disk management, But I can see only 1 500 GB HHD. It doesn't show the SSD drive.
Even the Intel Rapid Storage technology is not detecting. It shows internal empty port 0.
But when I checked in the BIOS, in the system information i can see the SSD mentioned.
If any one of you have faced the same problem and/or know some work around then please help.
Thanks,
SumitSounds one of the following problems:
1.) The drive is formatted MBR w/ win 8 features enabled / legacy disabled.
2.) A "dynamic" drive is present. -
Fast writes enabled in BIOS but not in Windows 2000
WPCID and SiSoft Sandra report that fast writes is disabled despite being enabled in BIOS. When fast writes are enabled with NVMax, all games crash within 30 seconds.
Hi there:
Do you have Windows 8.1 Pro or Enterprise 64bit OS edition?
Please read this:
http://blogs.technet.com/b/canitpro/archive/2014/03/11/step-by-step-enabling-hyper-v-for-use-on-wind...
http://windows.microsoft.com/en-in/windows-8/hyper-v-run-virtual-machines
Additional:
http://www.howtogeek.com/196158/how-to-create-and-run-virtual-machines-with-hyper-v/
http://www.eightforums.com/tutorials/2493-hyper-v-how-use-windows-8-a.html
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
MOVED: P67A-GD65 B3 Overclocked In Bios But Not In Windows?
This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=151585.0Nothing wrong with a solid 3.8. In the days of the P7N Diamond, I would have tried a cartwheel with a handstand finish to get a stable 3.8.
-
Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
== This happened ==
Every time Firefox opened
== The computer was hard shut down and did a improper shut down scan when it was restarted ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there. -
I need help ASAP, edits are showing in PS, but not in other programs
I hope someone can give me an answer. In only one folder, I have edited JPEGs that show edits in Bridge, Camera Raw and Photoshop, but not in Windows Explorer. I discovered this when trying to burn them on a disk. Is this something related to a setting in Bridge and is tehre a way to fix it so it accepts all the changes. Thank you!
P.S. I am using CS4Uh huh...that's to be expected unless you actually opened and processed the images through Camera Raw and Photoshop. All you've done to this point is edit the metadata settings, not the actual pixels. To see the final edits in other apps, you'll need to process the files and resave them as completely edited files. Bridge will properly diaply the metadata edits...but nothing else can.
-
I see a distortion icon image in Windows 8.1 but not in windows 8
I saw distorted icon image in windows 8.1 but not in Windows 8. This bug doesn't affect Windows 8.1 functionality but causes some icons to look ugly, distorted, fuzzy.This bug can be seen in "Delete confirmation dialog box". The
folder icon in delete confirmation dialog box will look distorted and ugly. Black edges will appear around the icon and the icon will not look correct.The same thing also happens in "Send To" menu.
Also heard that this bug is not related to graphics card driver or any other thing.
Hope windows will take necessary actions to solve this bug as soon as possible so that users like us can be satisfied with the new windows 8.1.Try running SFC scan. Refer the following link for more information:
http://support.microsoft.com/kb/929833/en-us
Balaji Kundalam -
IPod appears in iTunes 7 but not in Windows Explorer
my iPod appears in iTunes 7 but not in Windows Explorer
also i can't put any photo on iPodmy iPod appears in iTunes 7 but not in Windows Explorer
if you don't have "enable disk use" or "manually manage music" selected in your summary tab, that's normal.
do you have either "enable disk use" or "manually manage music" selected in your summary tab? -
My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.
Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Push button ijn appraisal showing in backend but not showing inn portal
Hi Expert,
I would like to ask that push button in appraisal while configuring ESS/MSS package.
It is showing in backend, but not showing in portal.
Request you to give your inputs to bring push button on to the portal.Hi,
are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
Regards,
Ana -
apps showing in library but not showing up in devices i pod- sync apps list. ...pls help
id: [email protected]Are the apps checked to be synced to the iPod and did you click on the sync button in Tunes?
Were the apps purchased fro the same accoubnt signed into in the iPod?
Are the apps compatible witht he iPOd model and iOS version?
Do you have restrictions set that prohibit instaling apps? -
How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.
Hello,
I apologize for submitting this question. Soon after I posted it I saw a similar question that had my answer..
Again, my bad for not looking first.
Ron Morris -
Html Validation icon shows in IE but not in Mozilla
html Validation icon shows in IE but not in Mozilla
Hi, All,
I use DWMX 2004
I placed the hmtl validation icon at the bottom of a template
so that
each page could be conveniently validated.
The icon is showing all right, both locally and online, in
IE, but it is
not showing in Mozilla.
What can I do to fix this?
www.tudo.co.uk/testing/rishton/shell/contents/contact/contact.html
The icon should appear underneath the up-arrow at the bottom
of the page.
Here is the template, with html extension for your
convenience:
http://www.tudo.co.uk/testing/rishton/templates/rishton_template.html
Thanks.
AdrianJoe Makowiec wrote:
> On 29 Apr 2006 in macromedia.dreamweaver, wrote:
>
>
>>html Validation icon shows in IE but not in Mozilla
>>
>>Hi, All,
>>
>>I use DWMX 2004
>>
>>I placed the hmtl validation icon at the bottom of a
template so
>>that each page could be conveniently validated.
>>
>>The icon is showing all right, both locally and
online, in IE, but
>>it is not showing in Mozilla.
>>
>>What can I do to fix this?
>>
>>www.tudo.co.uk/testing/rishton/shell/contents/contact/contact.html
>>
>>The icon should appear underneath the up-arrow at the
bottom of the
>>page.
>>
>>Here is the template, with html extension for your
convenience:
>>
http://www.tudo.co.uk/testing/rishton/templates/rishton_template.html
>
>
> I don't know about Mozilla, but it's showing here in
FireFox, which
> uses the same engine.
>
> BTW: Result: Failed validation, 24 errors
>
>
Hi, thanks for this information about Firefox. Hope someone
else may
have an answer for Mozilla.
Concerning the validation errors. I know about the million of
validation errors, we are upgrading a site from doc type
'transitional'
to doc type 'strict'. We have the site on a test server, put
the
validation icon first, let it point out the errors, then fix
them one by
one. When they have been fixed the site is published. (i.e.
we are not
claiming the site is valid when it isn't).
If somebody else can reproduce the problem in Mozilla I
should be most
grateful.
btw, I am Adrian Stock (=Adrian.Stock22), do not know why I
am showing
on the screen as 'domain unknown'.
Ah, perhaps I did not log in properly.
Adrian -
Edit GAL to show phone numbers but not email addresses
We would like to edit our company's GAL to show only the phone numbers for some staff and not their exchange email accounts. Is there a way to do this through Active Directory?
AD Environment: Server 2008 R2 Standard
Exchange Environment: Server 2008 Standard, Exchange server 2007.Link to the new thread: https://social.technet.microsoft.com/Forums/exchange/en-US/6c4158a6-107d-4da6-abad-c05106c20fde/edit-gal-to-show-phone-numbers-but-not-email-addresses?forum=exchange2010#371c659c-c002-4fb6-b5a1-ae776bf6534c
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile
Maybe you are looking for
-
Error installing Oracle client 10.2 on Redhat5 64bit
I get the following error when I'm trying to run Oracle client 10.2 x86 32bit on a redhat enterprise 5 64 bit. My understanding is that I can install client 32 on a 64 bit server. How can I make this work without getting 64bit client? Error in invoki
-
Function module to get structure of DDIC table
Hi everyone, Is there any SAP standard function module to fetch the structure of DDIC table ? Thanks in Advance
-
Photos dont load in firefox, why?
hello, i have just upgraded firefox to the latest version and tried to visit a web page i made: http://web.mac.com/jonfieldhouse/Site_3/bridgestone.html but none of the photos load anyone got any ideas why? thanks, jon
-
ChaRM change request/transport sequencing
hi everyone, how is everyone keeping track of the sequence needed to bring change requests production? Also, what happens if there is interdependencies between the changes made in two change requests? For example a change in A relies on B, and a chan
-
Flash won't work Safari 6.0.1 and OS X10.7.5
I have installed flash at least a dozen times. Followed the flash player troubleshooting instructions as well as Mac/Safari suggestions for slightly different versions/operating systems on these forums. I have uninstalled older versions of flash play