SSIS 2014 - Parametrize connection gives a problem of Null password
Hi guys,
I was using the option of Parameterize on the connections I have under
Connection Manager. I had no problem with the SQL Server Native client connections, however on Oracle Provider for OLE DB, as soon as I parameterize the connection string, all OLEDB sources that use this connection turn on the red X error mark.
It seems the password is not saved anymore because it gives an authentication failure saying it has a null password.
I'm using EncryptSensitiveWithPassword in package.
Any ideas on this? Thank you
Hi Pedro,
If I understand correctly, you get the error message that”The expression will not be evaluated because it contains sensitive parameter variable” when you are using package parameter or project parameter which with Sensitive = True in expression.
Based on my research, this issue is caused by design. For more information, please refer to the following feedbacks:
https://connect.microsoft.com/SQLServer/feedback/details/750997/changing-a-parameter-to-sensitive-should-trigger-alert-in-ssis
https://connect.microsoft.com/SQLServer/feedback/details/816052/ssis-evaluating-expressions-using-project-parameters-set-as-sensitive
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Similar Messages
-
My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored -
New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).
Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?
-
Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling -
2014 mac mini dual monitor problem
I just brought a mac mini (Late 2014) i have two displays monitors connected, one HDMI to DVI. and one thunderbolt to DVI. I can have both thunderbolts connected and the problem its the same, when back from sleep ,one monitor doesn't turn on. i have to disconnect one and then both work, it only happens when the mac goes to sleep. on cold restart or turning the mac on, this problem doesn't occur. any help.
I have this same problem too. I purchased the Mac Mini with the intention of running dual monitors. I'm using the HDMI and mini-display/Thunderbolt to DVI. I've also tried MiniDisplay/Thunderbolt to HDMI and I'm experiencing the same problem as angelfromfullerton. Whenever it tries to wake from sleep, it can't decide on monitor arrangement and keeps flicking between the two, making the OS unusable and forcing a reboot... EVERY TIME. I've also experienced the issue once or twice on a cold boot. It doesn't matter which Thunderbolt port is used either.
I'm going to have to return my Mac Mini unless this problem is fixed asap.
Mac Min, OSX Yosemite (10.10). -
I recently upgraded my set of custom data flow components to use the SQL 2014 SDK as we are upgrading to SQL Server 2014 RTM. The only change I made to my custom components was to change the references to the following DLLs from version 11.0 to version
12.0:
Microsoft.SqlServer.DTSPipelineWrap
Microsoft.SQLServer.DTSRuntimeWrap
Microsoft.SQLServer.ManagedDTS
Microsoft.SqlServer.PipelineHost
After rebuilding my assembly, adding it to the GAC, and placing it in the appropriate directory structure (the 120\DTS\PipelineComponents directory for both the x86 and x64 versions), my components no longer display in the SSIS toolbox in SSDT. In
addition, whether loading up my packages in SSDT or executing them via the SSIS catalog (in SQL 2014), I get the series of error messages below. I do have a PerformUpgrade method implemented in my packages that has worked successfully through previous
component upgrades. I also found this seemingly relevant thread (Custom
SSIS Connection Manager error message in SSIS 2014 (RTM): The connection manager '' is not properly installed on this computer.) and tried modifying the extensions.xml script, but I was unsuccessful with this approach (though I could have done so
incorrectly).
Validation error. DFT Process Changes: DFT Process Changes: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error loading xxx.dtsx: The "xxx" failed to cache the component metadata object and returned error code 0x80131600.
Error loading xxx.dtsx: Component xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF} failed to initialize due to error 0xC0047067 "The "%1" failed to cache the component metadata object and returned error code 0x%2!8.8X!.".
Error loading xxx.dtsx: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Error loading xxx.dtsx: The component metadata for "xxx" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Validation error. DFT Process Changes SSIS.Pipeline: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Thanks in advance,
BenHi Ben,
Please also update the reference to the SSIS assembly Microsoft.SqlServer.Dts.Design located in C:\Program Files (x86)\Microsoft SQL Server\120\SDK\Assemblies folder to the version 12.0.0.0. Besides, rename IDTSxxxx110 objects to IDTSxxxx120.
It may also be the factor that the custom mapping file is not created correctly. You can make a copy of the built-in mapping.xml.sample file, rename its extension to XML, and then edit its <ExtensionMapping> attribute:
<ExtensionMapping tag="mycustom extension"
oldAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
newAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=2.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
Then, we need to upgrade the packages, and SSIS will read all the XML mapping files placed in this directory during upgrade.
References (although the blogs are written for SSIS 2008 by Matt, we can still refer to them for SSIS 2014):
http://blogs.msdn.com/b/mattm/archive/2008/02/01/custom-extensions-in-sql-server-2008.aspx
http://blogs.msdn.com/b/mattm/archive/2007/06/05/katmai-custom-components-and-upgrade.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
How to upgrade ssis 2012 packages into ssis 2014
we upgraded ssis 2012 packages into ssis 2014 but when i execute the packages its showing as validation mode .
Hi harikiran2010,
To upgrade packages that were created in earlier versions of Integration Services to the Integration Services format that SQL Server 2014 uses. SQL Server provides the SSIS Package Upgrade Wizard to help in this process. We can double-click the Integration
Services project to open the project in SSIS 2014, Integration Services automatically opens the SSIS Package Upgrade Wizard, then select the desired packages to upgrade.
As to the validation issue, I think the issue can be caused by the connection manager validate fails. We can test the connection by right-clicking the connection manager in the Connection Managers area of SSIS Designer and then clicking Test Connectivity.
Another possibility is you are using some expressions to control some configurations, we can set all of the package and all of the connections to work offline when data sources are not available by
enable Work Offline from the SSIS menu and set DelayValidation to True on package elements whose configuration is not valid at design time to prevent validation errors.
References:
Upgrade Integration Services Packages Using the SSIS Package Upgrade Wizard
Troubleshooting Tools for Package Development
If the issue is still existed, please provide us more information about the error message. Then we can make further analysis.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Connection to 2WIRE problem, need help soon before I have to format
I'll start off by providing a picture
http://img218.imageshack.us/img218/8102/picture8zw1.png
Basically what happened was at first I wasn't able to connect to my Aunt's 2WIRE router, this was while I was using 10.4.9 (and after it stopped working I tried upgrading to 10.4.10 and nothing changed.) The reason why I couldn't connect was because nobody knew the password, but after calling SBC they disabled the password/WEP and disabled S SID broadcasst so that I could connect to it without any issues and without every neighbor being able to see the network.
This worked fine for about a week. Then one day it stopped working, and the only thing out of the ordinary is that the power in the house went out.
Here is the thing, I can still connect to a local Apple Network someone around me has set up. The only problem is 1) I cant stay connect for more than 10-20 mins and 2) Im stealing someone's internet basically.
I've called both SBC and Apple care. First I went to SBC, we did all the trouble shooting and they said it was a problem with my MacBook. I called Apple and they told me it was a problem with my router, but I forgot to tell them that another computer (a PC) is currently able to connect to the router, just not mine. But I called SBC again this morning and again they referred m e to apple care.... and I called Apple Care this morning but I was on hold for almost 45 mins and after 10 minutes of talking the call dropped so I just went to bed.
I think I might try calling them once more, but I'm more than likely going to format my computer. If anyone can give me any tips for I do so, please let me know.Hiya...
Just trying to help.. I dunno what sort of router your ISP is using... But doesn't your 2Wire router or modem have a software control panel? Which could be access via HTTP?
For most routers the IP address should be 192.168.0.1 or something similar. -
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me
-
My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?
Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
Good luck and do report back. -
Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!
Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?
-
Can't connect to the internet in my home yet other devices can. I tried it in other wifi places and it connects without a problem. My home wifi is with ATT Uverse. I cheched the IP address on my laptop and its different than on my Ipod although it on the same network.
Move off WEP to WPA or, preferably, to WPA2 (as recommended by Apple). WEP has been deprecated by the WiFi Alliance since 2004 as insecure (it can be cracked in seconds by any hacker).
Note that each device on a network has a unique IP address but if your address starts with 169 then you did not get a valid IP address assigned to you by your router. If restarting the router did not cure the problem then you should check for a firmware update for your router. -
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol -
my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Can't view videos using FCS client on Macbook Pro
I'm on a new Macbook Pro and I'm accessing FCS via the client. All seems fine but when I attempt to view an asset by clicking on the "video clip" icon nothing happens. Same issue when I open the asset and use the "Actions" drop down and select view.
-
How to automat. copy configuration of higher level material to sub-item
Hi Experts, I have Make to Order Scenario. My customer wants the configuration of the non-phantom sub-items in the sales order to be automatically copied from the configuration of the higher level material. I have added the ZCOPY function module( to
-
How to merge 2 cts(change request/transport request) into one?
Hi all, I have created a transport request and my collegue created one and i need to merge his cts of his into mine so that everything falls under one CTS. Thanks Pooja
-
Has anyone used the new 5K retina iMac with Lightroom
Has anyone used Lightroom with the new 5K Imac. If so any problems ?
-
How to preent iTunes 7.5 from crashing My Win XP
Dear All, Am a new iPhone user, and I tried the last few days to synchronize my iPhone to my laptop using iTunes, but every single time my windows crashes and restarts when connecting iPhone thru USB to my laptop. Win XP recognize that a digital came