SSIS Can I redirect row AND fail the component?

Hi All,
I have been looking at redirecting errors rows in SSIS and such and I am not finding exactly what I am looking for and I am wondering if it is possible. What I would like to do is:
If I have a component loading data or whatever if there is an error I would like to somehow note which specific record failed, preferably somehow redirect the record or the row id to the log but a table would work...AND fail the component as well.
I want the package to fail because I want to be alerted to the bad data and have the opportunity to fix it rather than risk it beeing missed in a log. Yes I know I could write a custom script or component to check the log file or table for records then fail
or something but what I was interested in is there a simple way to do this.
Under the Error Output can i select Reidrect Row and still have the component fail?
Thanks :-)

You need:
1) A log enabled (to capture the error and the record number, and
2) You used the red arrow to redirect to looks like a flat file, and finally
3) A Script Task connected to #2 that aborts the package execution.
Arthur My Blog

Similar Messages

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Add dynamic buttons to each report row and bind the row data to buttons specific to that row

I have a page with a form at the top and a report at the bottom which is tied to a table. I need to add a pair of buttons for each row of the table and add dynamic actions for these buttons. I need to submit the data corresponding to the row to a REST service and refresh the table/row. I know it is possible to add ajax call and refresh the table after the response is received. But I am not sure how I can dynamically include a pair of buttons on each row and have the access the data corresponding to the record when a particular button is clicked. I was not able to find such a feature using the help page. Can you please let me know if this is possible. Thanks in advance.
Below is the representation of how I need the page to look like.
Col 1
Col 2
Col 3
data 1
data 21
data 31
Button 1
Button 2
data 2
data 22
data 32
Button 1
Button 2
data 3
data 23
data 33
Button 1
Button 2
data 4
data 24
data 34
Button 1
Button 2
I should be able to access data 1, data21, data 31 from button 11 and button21 etc.

select data1,
          data2,
          data3,
          null button1,
          null button2,
          rowid r_id
from .....
If you edit the column for button1 and navigate to the Column Formatting region you can create your button here, several different ways. You will need to play around with how you prefer. See below:
<input class="button1" type="button" id="#R_ID#" value="label for the button" /> or <button id="#R_ID#">label for button</button> or you could use <a> and apply css of your theme.
You also create both buttons in a single column. From here you can reference any of the columns from your select by using the #COLUNMNAME# format (as I did with R_ID).
You will next need to something similar for all columns you want to be able to grab when you click the buttons. See below:
--- This would be for data1 column
<span id="D1-#R_ID#">#DATA1#</span>
You would do these for each column that you want access to when button clicked as mentioned above. You could bypass this step and use jquery to traverse the DOM using .closest() and .find() and give each column a distinct class. Is is your preference.
You would then create a dynamic action triggered when .button1 is clicked. Now that you have that object you can get the id of the triggering object which would be your r_id and from there you can access all your individual data points(all this done in a javascript in the dynamic action) and assign to hidden items on your page. The next step of that dynamic action you could execute pl/sql and pass those in page items.
Hope that all makes sense.
David
Message was edited by: DLittle
Just as a bit of clarification: the r_id column does not have to be rowid, but it does need to be unique for each row return. You could use your primary key or rownum. Whatever works for your scenario.

I copy a row and then the next row as no actions

I know this is easy.
when I set up actions in a row and try to copy it and past a row below it is not there.
can anyone help?

Hi,
One of the easiest ways to do this is simply select the row (discussion below about selecting) and hold the "Ctrl" + "D" ("D" is for "Duplicate"). This will duplicate the row and place it directly under it. Also, you can use "Duplicate" by clicking Edit>Duplicate
Selecting rows can sometimes be tricky. If I use the mouse, I always try to confirm in the Object and/or Hierarchy Pallet.The mouse can select the row (arrow with an underscore) or all the objects in the row (arrow no underscore)
Here are 3 ways:
The mouse can select the row (arrow with an underscore) or all the objects in the row (arrow no underscore). You move the cursor just to the left of the table and the arrow appears.
One of the best ways I find is selecting the row in the Hierarchy Pallet.
Select an object in the row and on the tool bar click Table>Select>Row
I avoid pasting anything if I can help it. If you use flowed forms and if you paste a lot, and If you aren't careful, you'll end up with a corrupt form. Designer is very unpredictable about where it will paste. If you have a large form, it can take a minute or two to track down a pasted object's location. Then you have to move it to where you want it.
Better to use "Duplicate". That usually means it will be next to the item you're duplicating. If you copy and paste, paste, paste repeatedly too fast, You can really mess things up. Every Paste command takes longer than you think to execute. Wait at least 2 seconds before doing anything after pasting. Otherwise, you'll interpt Designer while it's busy writing the new XML. Yes, Designer is still busy doing work even after you see the new item appear. Be patient.
Good luck!
Stephen

HT201272 Hello there,I delete my scruff application on the 8/05/13. Receipt N: 184052577343. And I was charged ammount of £ 16.99on the 15/05/13. I t's a Subscription Renewal. How can I stop it and get the refund of this ammount back on my account? Thank

Hello there,I delete my scruff application on the 8/05/13. Receipt N: 184052577343. And I was charged ammount of £ 16.99on the 15/05/13. I t's a Subscription Renewal. How can I stop it and get the refund of this ammount back on my account? Thank you!!

There are instructions on this page for managing and stopping auto-renewing subscriptions (deleting an app won't stop it) : http://support.apple.com/kb/HT4098
In terms of a refund, what does it say on the app's description page in the store (a lot say that refunds aren't given) ? But you can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have two Apple ID, how can I delete one and use the email address associates to the main one?

I have two Apple ID, how can I delete one and use the email address associates to the main one?

If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

Hi...my last updating software was with 4.2.1 and today I updated new software 4.3.5 and im not happy with more strong vibration ,Can apple consider it and restore the previous settings of vibration.Thank you

Hi...my last updating software was with 4.2.1 and today I updated new software 4.3.5 and im not happy with more strong vibration ,Can apple consider it and restore the previous settings of vibration.Thank you

Apple isn't here.
This is a user to user forum.
Allan

Why can't I copy and paste the music from my iPhone on iTunes 11 to a folder in my Music Library?

Why can't I copy and paste the music from my iPhone on iTunes 11 to a folder in my Music Library? I want to have a copy of the music on iTunes so when I update to a newer version of iOS I don't lose my music. And no I didn't buy this music off iTunes and neither will I use iTunes Match.

There has never been a function to copy anything from an iPhone and paste it to a computer.
All of your media should be in iTunes already.
If it is not and was purchased from iTunes, right click on the device and select Transfer Purchases.
If the media is not in iTunes and was not purchased from iTunes, how did you get it on the device in the first place?

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly app

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly appreciated.

Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
var subtotal=0;
for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
nfSubtotal.rawVlaue=subtotal;

The need to compress to max 1GB is obsolete. You can not determine what and how the space provided on iDisk can be used. You provide it or NOT. If you DO, then let US free, if you don't, then TELL us WHY, so we can choose to go public elsewhere. The stren

The need to compress to max 1GB is obsolete. You can not determine what and how the space provided on iDisk can be used. You provide it or NOT. If you DO, then let US free, if you don't, then TELL us WHY, so we can choose to go public elsewhere. The strengthood for Apple for the fourthfullness to be legal, which I respect, can become too restrictive in my European eyes. Any hearing around? René

As was noted in the introductory material for the Apple Support Communities website (presented when you registered), these forums are set up for user-to-user assistance and discussion, not for user-to-Apple communications.
Suggest you resubmit your position statement to Apple via product feedback for iCloud, which you can access via a link on this page -
Apple - Feedback
...we've all moved to iCloud, isn't it?
Um, no, we all haven't.

How can I uninstall Bootcamp and Recover the partition for the Mac HD

How can I uninstall Bootcamp and recover the partition for the IMac HD?

Boot into OSX. Go back into the Bootcamp utility in the Utilities folder and re-run it. It will give you the option to remove the Windows partition and make the OSX partition fill the whole drive again. OSX will NOT be lost in the process. No re-installing necessary. Only takes a few minutes or less to complete.

HT2404 my hard drive crashed and nothing recoverable. Apple installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

My hard drive crashed and nothing recoverable, local Apple Store installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

A blank drive needs to be formatted first, you do that hold c boot (or hold option key boot) from the 10.6 install disk (or Lion USB)
Read how to format the drive in Disk Utility here
https://discussions.apple.com/docs/DOC-3044
How to install OS X
https://discussions.apple.com/docs/DOC-3251
Software Update fully,
Hold the option key and click on Purchases when in MAS to download your 10.7 etc.

Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account?

Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account? Should I activate it via WiFi or iTunes? I am filtering on the MAC no and I cannot read that number from the new iPhone without having it activated??!!
All I want do is to have the new phone activated and then tested!
Ciao // Mufftas

Yes, you can do that.

SSIS Can I redirect row AND fail the component?

Similar Messages

Maybe you are looking for