Ssis execute process task error: process exit code was 1 while the expected was 0

Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.

Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Execute Process Task - Error :The process exit code was "2" while the expected was "0".

I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:\Program Files (x86)\Microsoft SQL Server\90\COM
Executable :      C:\SQL_bat_Files\SQL5\TC_CTI\customer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1"
the .sql file will be generated at:  C:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:\SQL_bat_Files\SQL5\TC_CTI\package_occurrence.bat" "" at "C:\Program Files (x86)\Microsoft SQL Server\90\COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?

Jwelch,
Thanks for the input,
"Change the SuccessValue property of the Execute Process task from 0 to 2 (which means that you will get a failure if there are no differences, since TableDiff returns 0 in that case)."
           -- Not possible b'coz if there is no difference in the tables, which is also a possiblility, the job will fail.
"FailTaskIfReturnCodeIsNotSuccessValue to FALSE (which means it won't fail regardless of the code returned)."
          -- Does this mean the job will never fail? Lets say the target table doesnt exist, then, by setting "FailTaskIfReturnCodeIsNotSuccessValue to FALSE " will the job fail? I guess my question is, how is what you've suggested different from setting "ForceExecutionResult = Success". Both the cases will show the task status "Success" even if there is an error.
Is there a way to keep the property of job 'Failure' if there is any generic errors like target table not found or say, the path given for .sql file output is not valid etc.
Thanks again,
Little_Birdie.

Analysis Services Processing Task - Error processing

Hi all,
I have a SSIS package containing an Analysis Services Processing Task. In case it fails, I want to insert the error messages in a table. I have create an SSIS package that fails because of dimension values that are not in the fact table. The package fails and
shows a number of errors in the debug window:
Error: 0xC1000007 at Create Cube, Analysis Services Execute DDL Task: Erreur interne : L'opération n'a pas abouti.
Warning: 0x811F0001 at Create Cube, Analysis Services Execute DDL Task: Erreurs dans le moteur de stockage OLAP :
Clé d'attribut introuvable lors du traitement de : Table : 'dbo_SSIS_DATA', Colonne : 'PRODCODE', Valeur : 'HUME'. L'attribut est 'PRODCODE'.
SSIS package "Step 2 - Create Cube.dtsx" finished: Failure.
However in the error list window there are 0 errors and 0 warnings.
So, why doesn't it show an error message in the error list when the package clearly fails. And how can I get the error messages from the log into a table? Thanks in advance.
Hugo

Error list does not reflect what is getting to be logged, it is more for package validation.
But the same errors will show up in the status, and the output window.
Furthermore, if your log is table bound (e.g. the sysssiserrorlog) and in the log config you chose to log the OnError events then these will be captured automatically.
Arthur
MyBlog
Twitter

SSIS execute process task error on unziping

Hi
I am using 7zip to unzip files in SSIS using execute process task. Here is the configuration of the task:
executable: C:\Program Files\7-Zip\7z.exe
arguments: e default-o\\servername\livechat\unzip\
However, on executing package in BIDS, following error is thrown
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" "e \\servername\livechat\7566_20121009.zip-o\\servername\livechat\unzip\" at "", The process exit code was "2" while the expected was "0".
Can someone help where I made mistake?
Thanks,
hsbal

I have mapped the share to F: and then tested. Unfortunately that doesnt work as well.
I am getting the following error:
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" " F:\*.zip -o F:\unzip" at "", The process exit code was "7" while the expected was "0".
Thanks,
hsbal
Seems like a syntax error. Go through this
http://www.dotnetperls.com/7-zip-examples
Rajkumar

Execute Process Task error-Unzip Files

Dear All,
I have a SSIS package, that downloads a Zip file from FTP Server and extract and load that information in Sql Server Table. In my case every time I have only one file in FTP Server. There is no possible to get multiple files from FTP Server.
While at the time of executing SSIS package getting error at Execute Process Task(Unzip Files) i.e
Error Description :In Executing "F:\7z\7z.exe" " x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles\" at "", The process exit code was "2" while the expected was "0".
This error message getting while unzip my file.
Can some one help on this issue.
Regards,
Praveen C.
Regards, Praveen

Hi Praveen,
After testing the issue in my environment, I find the issue is caused by the code in Arguments is incorrect.
To fix this issue, please refer to the code below:
x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Execute Process task Error

Hi All
when i am using the Process execute task in ssis it is failing with the fallowing error
[Execute Process Task] Error: In Executing "C:\Program Files\PuTTY\pscp.exe" "echo y | pscp -sftp -pw Password
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv" at "C:\Program Files\PuTTY", The process
exit code was "1" while the expected was "0".
when i run the same command from cmd promt is succesful
The command is
echo y | pscp -sftp -pw Passwprd
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv
In Execute Process task i have set the fallowing value
Executeable = C:\Program Files\PuTTY\pscp.exe
Arguments = echo y | pscp -sftp -pw Passwprd
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv
Working directory = C:\Program Files\PuTTY
what is the issue ? how to solve that
Surendra Thota

The " are necessary to pass in a path with spaces1 st try it in a script. See if that works. If not see this good tutorial: https://sqlserverrider.wordpress.com/tag/execute-process-task/
or
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2013/03/04/integration-services-packages-using-execute-process-task-with-winzip32-exe-fails-intermittently-when-run-under-a-sql-server-agent-job.aspx
Arthur My Blog

Execute Process Task Error - Powershell script

I've got a powershell script that is executed through a Execute Process Task that is giving me an error when executed through the Execute Package Utility on a 64bit server.
"c:\windows\system32\windowspowershell\v1.0\powershell.exe" ""& 'C:\CubeArchive\Linked DB to XMLA.ps1'"" at "", The process exit code was "1" while the expected was "0".
Here's the rub:
It runs fine from Visual Studio on that server.
On my local maching (32bit), it runs fine from both Visual Studio and Execute package Utility.
Does anyone have any idea why this is happening?
Thanks,
Jason

Ok - found the problem.
This is the first time that I'm using powershell.
I had set the ExecutionPolicy on that machine to unrestricted from the powershell console beforehand.
But unknown to me, this setting was only applicable to the 32 bit environment.
I set the 64 bit environment to unrestricted and it worked. (I added another Execution Process Task to the package to set this before hand - I only did this once and now can remove it.)
I thought that the setting for powershell would be server wide, I didn't know that there was a distinction of the 32 bit and 64 bit environments.
Thanks,
Jason

SSIS-Execute Process task Error in 2012 version _File/Process "\\Servername\Foldername\batfile.bat" is not in path

Hi Sir,
I have develop the SSIS Package in 2012 version and i am calling the SSIS Package using Stored Procedure according to my requirement and that stored procedure will be using in my SSRS report Datasource.
once after the SSIS Pacakge has design and develop and deploy into the server as Project Deployment model..when i run the ssis Package ,calling through the SP it is working fine...
even when i design a SSRS report using SSDT(sql server data tools), in the SSRS reprot calling the above SP in Dataset.when i execute the SSRS report it is wroking fine...
once SSRS report has been deployed into the remote Server.. when i Execute the SSRS report i am getting the below Error message:
SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path
belo is the SP for calling the SSIS package.
DECLARE @EXECUTION_ID BIGINT,
        @PKG_RESULT INT
EXEC [SSISDB].[CATALOG].[CREATE_EXECUTION] @PACKAGE_NAME=N'abc.DTSX',
                                           @EXECUTION_ID=@EXECUTION_ID
OUTPUT,
                                           @FOLDER_NAME=N'aa',
                                           @PROJECT_NAME=N'xxx',
                                           @USE32BITRUNTIME=FALSE,
                                           @REFERENCE_ID=29 --unique identifier for environment
EXEC [SSISDB].[CATALOG].[START_EXECUTION] @EXECUTION_ID

Where the BAT part is ?
It looks like a security issue.
The account running has no permission apparently over "\\Servername\Foldername\batfile.bat"
Arthur My Blog

PDW : DWLoader in Execute Process Task, Success Value return code

Hi,
I'm using SSIS Execute Process Task to call DWLoader.
It seems the Success Value return code is 2.
Which is working fine except that after all data are loaded in my table a 0 return code is sent.
And so my task fails.
Any idea how to handle this ?
Thx for your help !
Regards,
Bertrandr

My understanding is - When DWLoader process returns 2, everything goes fine but in another case it returns 0 then task fails.
You can Set: FailTaskIfReturnCodeIsNotSuccessValue
to FALSE so that task will not care about return values
But in case of any other error such as syntax - save
error in MyVariable and verify if MyVariable != ""
-Vaibhav Chaudhari

Error while executing UNIX script from BODS - exit code 127

I am trying to execute a unix script by calling it in BODS job. It is giving an error saying Program terminated with exit code 127. The same script when i am executing in UNIX it is working fine. I am unable to trace the issue.

Hi Sabre,
As per the guidelines provided by the article, i had done below changes..
InputStream is = null;
InputStreamReader iStreamReader = null;
BufferedReader bReader = null;
String line = null;
try{
String fileName ="test.ksh";
String argValue ="satish"; // value passed to the script
String exeParam = "/usr/bin/ksh "+fileName+" "+argValue;
Process proc = Runtime.getRuntime().exec(exeParam);
is = proc.getErrorStream();
iStreamReader = new InputStreamReader(is);
bReader = new BufferedReader(iStreamReader);
System.out.println("<ERROR>");
while((line = bReader.readLine()) != null)
System.out.println("Error is : "+line);
System.out.println("</ERROR>");
int exitValue = proc.waitFor();
sop("Exit Value is : "+exitValue);
catch(Exception e)
e.printStackTrace();
Now , it's showing something like..
<ERROR>
</ERROR>

SSIS 2005 Script task to process XMLA

Hi,
I am looking for a script (in script task SSIS 2005) to execute the XMLA command.This needs to be done through script only as my Analysis DDL task is having issue with connection.Please let me know,if any one can help me on this.
Thanks,
Ramesh

Not sure whats the issue with your connection but we usually make use of dynamic XMLA scripts generated using script task and pass them onto Analysis services ddl task to create partitions. Similarly we use analysis services processing task to process the
created partitions. If you can give more details on issue we may be able to help you out.
Alternatively, if you want a solution using only script task have a look at the below
http://bishtabhinav.wordpress.com/2012/06/01/cube-processing-using-ssis/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?

Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019

Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Execute SQl Task Error SSIS Package

Hi all,
I`m using for each loop container in my package to grab the file name from the source path. I have created 2 vairables
FilePath and SourceFolder
I`m using execute sql task inside the container and this is my query
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) SELECT File_name = ?,
File_Date = GetDate()
Please not the Table I am trying to insert has more columns but at this stage I dont need them.
When i execute the task I get an error
[Execute SQL Task] Error: Executing the query "
INSERT INTO [dbo].[DCA_FF_TEST] ([File_Name],[F..." failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters
not set correctly, or connection not established correctly.
Can someone point me in the right direction? Am I missing anything?
Resultset property Set to None
Parameter Mapping: Variablename: FilePath , Direction: Input, datatype : Varchar, Parametername: 0, ParameterSize: 100.
I`ve checked the connection as well it works.
FM

Did you try
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date)
SELECT ?, GetDate()
Or
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) VALUES (?, GetDate())
A Fan of SSIS, SSRS and SSAS

Ssis execute process task error: process exit code was 1 while the expected was 0

Similar Messages

Maybe you are looking for