SSL certificate not valid in Safari, but webservice  works with Chrome and Firefox

As a MD, I'm used to check blood results online on the service
https://inet.zentral-labor.ch/c16/kunweb.dll - this is the online-portal of my laboratory medica in Zurich. http://www.medica.ch
Access to the loginscreen is public ;-) and should look like this (Screenshot from Firefox)
I've setup a new workstation 3 weeks ago (iMac with OS Lion 10.7.4), and this webservice service works fine till yesterday. Now, Safari is every time we try to reach the service telling us, that this service needs a certificate, we can choose only a default apple certificate
and then, the error is:
This Site needs a valid SSL-Client-Certificate... (Screenshot below)
What's wrong with Safari? With Chrome and Firefox, the webservice works fie without any problems.
Thanks for an advice
MD Patric Eberle

As a MD, I'm used to check blood results online on the service
https://inet.zentral-labor.ch/c16/kunweb.dll - this is the online-portal of my laboratory medica in Zurich. http://www.medica.ch
Access to the loginscreen is public ;-) and should look like this (Screenshot from Firefox)
I've setup a new workstation 3 weeks ago (iMac with OS Lion 10.7.4), and this webservice service works fine till yesterday. Now, Safari is every time we try to reach the service telling us, that this service needs a certificate, we can choose only a default apple certificate
and then, the error is:
This Site needs a valid SSL-Client-Certificate... (Screenshot below)
What's wrong with Safari? With Chrome and Firefox, the webservice works fie without any problems.
Thanks for an advice
MD Patric Eberle

Similar Messages

  • Cross browser testing : Modifier Keys playback actions not working in chrome and Firefox

    Hi,
    In my work flow I have to select multiple items in list.So I have recorded 'Ctrl+Click' action to select list items.In Chrome and Firefox it is not selecting multiple Items.
    Even Ctrl+A,Ctrl+C,Ctrl+V also not working in chrome and Firefox.Complete modifier keys support is not observed in chrome and Firefox.Let me Know how to automate modifier keys actions in cross browser?
    Regards,
    Nagasree.

    Hi Nagasree,
    Welcome to MSDN forums.
    First,please make sure the Chrome and Firefox is supported by cross browser testing.
    Latest version of Chrome and Firefox supported by cross browser testing are Chrome version 38.0.2125.111 and
    Firefox 33.
    I doubt whether Chrome and Firefox in cross browser testing don’t support automating modifier keys or there is anything wrong on it if you are using supported browser. Since this issue is related to the Extensions tool
    Selenium components for Coded UI Cross Browser Testing, if possible, I suggest you post this
    issue here, click “Q AND A”, and then you could post this issue there, you would get dedicated
    support there.
    Thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SSL certificate not valid

    Just started receiving 'server's security certificate not valid for palm.imap.mail.yahoo.com' error early this morning. I have a (Sprint) Palm Pre (P100EWW) on version 1.4.1.1. How do I correct?

    I have tried removing palm and still cannot get it to work!   any other ideas?   I did notice it changed the port to 995 when I first was entering my email info.   It used to be set to 993?
    Also, what do you put in the username....  is that the beginning part of the yahoo id prior to @yahoo.com?

  • Internal pdf links not working in chrome and firefox

    I have some PDF files that I am adding links to additional PDF files that are located in the same folder on our webserver using Acrobat Pro XI. The links work fine in IE and the other PDF files open up and display well in the IE browser, but the links don't even show up in Chrome and will not open in Firefox. Further, the links in Safari, deliver an error message pop up saying the file could not be opened. If you click OK, the file does open. Also, in Acrobat > Tools > Add or Edit Link, I can change the properties to "Open File" and pick the "Open in New Window" option, but when I save the changes and come back, the option has automatically changed back to "Execute a Menu Item" and of course, the file I'm linking to does not open in a new Window.  These files were originally created in Word by another person and the person who converted them to PDF added fillable form fields throughout the document prior to converting to PDF. The links I am adding are being added using Acrobat Pro XI in the PDF file. Should we insert the above-mentioned links in the Word docs prior to converting to PDF to ensure the links work in all browsers, or are these browser issues common to all internal PDF links?
    Please help!
    Thanks,

    Make sure that you are using the Adobe PDF NPAPI viewer for Chrome and Firefox.  Both Google Chrome and Mozilla Firefox now have their own default PDF viewers.
    To change Chrome's settings use this blog:  Change PDF Viewer back to Adobe’s in Google Chrome « Caveat Lector
    To change Firefox's settings use this:  How to disable the built-in PDF viewer and use another viewer | Firefox Help

  • Browse sequence not working in IE 10 - works in Chrome and Firefox

    Hi all:
    I am using RH10 and generating webhelp. I have applied the recent fixes for webhelp.
    The browse sequence does not work when the webhelp is displayed with IE 10. It works when the webhelp is displayed in Chrome and Firefox. Index, Search and Glossary are working in all three browsers.
    Does this sound familiar to anybody? It seems to be a different problem from the one that was addressed by the recent fixes.
    Thanks in advance for any help.
    Juliette
    Working on a deadline and getting rather stressed....

    Do you have the latest IE patches installed? See
    http://www.wvanweelden.eu/articles/robohelp-patches-and-updates for an
    overview of available fixes.
    Kind regards,
    Willam

  • Safari 5.1.7 "Invalid URL" & "certificate not valid"-Google won't even work! HELP

    I have the newest version of Safari and as far as I know everything else on my computer is up-to-date. I checked for a software update and it claims everything is up to date. This has been happening for a little while and started with the invalid site certificates. I never was sure if I should click "continue" or "cancel". I first was clicking cancel and continue trying to see what changed. Cancel would keep me on the same page (I think, if I remember correctly) and continue would usually take me to the desired site. But recently this problem with site certificates has been happening more and more on different sites (I believe it began on facebook; and on sites I use daily). I just tried to google the problem and of course a web page of "Invalid URL" comes up. So I tried to see if it would work on a different browser (Firefox and Chrome), I had the same problem on those two, too, which makes me think a Google problem. However, this happens on other sites, such as facebook, and the site doesn't work for a little while (usually a period of X minutes). Even when I completely quit Safari, this doesnt change.
    I reset Safari tonight, and I've cleared the cookies, and I've emptied the cache, but nothing seems to be working. Im starting to wonder if there is a way to downgrade just one version of Safari to see if maybe this is a bug on this version of Safari, but I have no idea if that's possible or if it'll work.
    Please help!

    I hear ya...irritating as ****.  It's on all the other I've followed th other threads and tried the fixes, so far nothing.  Hit me up if you ever find a workable solution other than going back to a PC.  :s You'd think Apple would've fixed this by now, cause they're supposedly very very very very good.

  • Links will not work in websites accessed via FireFox, but work with Chrome and IE.

    This happens randomly. If I open a webpage for something like a news site and they offer a slideshow of information, the carat/ arrow (like this >) wont take me to the next slide. Here is an example of the type page: http://news.discovery.com/human/life/the-sorriest-people-of-2014-141230.htm?utm_source=newsletter&utm_medium=email&utm_campaign=dnewsnewsletter
    I have looked through settings and reloaded firefox several times. I have tried updating all my apps, though that page has its own issues I dont have time for here. Nothing seems to work.
    Usually, the page just sits there, static. The next page arrow is active, it highlights when I mouse over it, but it wont activate when selected.
    This has been a problem for quite a while, at least over the last two upgrades.

    Separate Issue;
    Your System Details shows;
    Installed Plug-ins
    Adobe PDF Plug-In For Firefox and Netscape 11.0.9
    Adobe PDF Plug-In For Firefox and Netscape 11.0.10
    Having more than one version of a program may cause issues.
    I checked the web page and had no problem.
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • VCSC Presence works with MOVI 4.2, but not 4.3. But it works with the VCSE

    Good evening,
    I have run into an issue with a VCSC. For some reason, Presence information doesnt seem to reach any MOVI client registered to the VCSC. The odd part of it is it is just specific to Jabber client 4.3 and greater. When I register the same client to the VCSE, it registers fine.
    Has anyone else ran into this? I just blew away the majority of the config and rebuilt it, but the issue still remains.
    Aside from just the presence information, all other calling works on the VCSC.
    Any help to narrow this one down would be greatly appreciated.
    D.

    We've had quite similar issue with VCS-C and VCS-E (X7.1) scenario.
    VCS-C is the registering clients against the AD, but all clients has to be proxied from the VCS-E to the VCS-C.
    VCS-E has no DNS Zone with any matching SearchRule (therefore there is another VCS-E in this scenario).
    Presence was also only working if we used JabberVideo client 4.2 and/or clients were directly registered to VCS-C (which is not allowed in our scenario).
    After diagnostic log analyzes, we've noticed the difference between working and not working cases:
    Working
    Contact: IP_ADDRESS_CLIENT:2524;transport=tls>
    Non-working
    Contact: DOMAIN;gr=urn:uuid:xyz>
    After that we've recognized, SIP GRUU function makes the difference.
    http://tools.ietf.org/html/rfc5627
    It seems that the 4.2 client ignores or breaks the GRUU function offer from VCS and the new clients are ready to deal with it.
    In consequence we've deactivated SIP GRUU Mode on VCS-C by entering:
    xConfiguration SIP GRUU Mode: Off
    Result: we've got also running PresenceStatus for JabberVideo clients >4.2  (mainly tested with Version 4.7).

  • Just installed IE 10. Adobe Flash is installed, and works in Chrome and Firefox, but not IE10

    Please, someone tell me what's going on. This is driving me nuts!
    [email address removed]

    Download the Adobe Flash Player installer directly by right clicking the following link and selecting "Save target as" (IE).
    Flash Player for ActiveX (Internet Explorer)
    Save it - DO NOT run it.
    Reboot, and THEN run it.
    If you're still having IE troubles,
    See:ActiveX Filtering in Internet Explorer
    and: Enabling Flash Player in Internet Explorer

  • QT is not working on Chroma and Firefox

    I have the latest version of Snow Leopard.
    When I try to see the new videos on the Apple site the browsers (except for safari) ask me get QT.
    When I click on" download" an apple site screen says
    QuickTime is built into Mac OS X.
    I updated and everything.
    Whats happening?
    Thanks in adavance, guys.
    Ben

    Hi,
    can you be more explicit in explaining what you want to achieve and what is not working? You mean that the tab menus are not getting in focus using the tab key? Have you tried setting clientComponent=true on them?
    Frank

  • Tab navigation is not working on chrome and firefox

    Hi Every One,
    we are using jdev 11.1.1.6.
    Navigation across tabs on click of tab on key board is not working on firefox and chrome.
    Please help me with your inputs.
    Thanks in advance.
    Regards,
    Lavanya.

    Hi,
    can you be more explicit in explaining what you want to achieve and what is not working? You mean that the tab menus are not getting in focus using the tab key? Have you tried setting clientComponent=true on them?
    Frank

  • Why doesnt scrolling feature on mouse work in firefox but works with chrome and IE?

    I installed firefox on my laptop and when i try to scroll with the keypad it wont let me. The keypad works fine with all other programs except firefox. Ive uninstalled and reinstalled firefox already and no luck.

    If it's an Acer laptop, there appears to be a bug with the ALPS drivers. See: https://bugzilla.mozilla.org/show_bug.cgi?id=605357

  • I get the Corrupted content Error loading a page on my local server but it works in Chrome and IE (and Firefox before version 7) When I saved the page as a file(Chrome), I could load that file in Frefox.

    webpage is on my SBS2003 server ChoiceMail Spam Blocker by Digiportal

    You usually get such an error if there are multiple location redirects send via the HTTP response headers.
    Firefox doesn't allow that for security reasons.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] - Corrupted Content error due to multiple Content-Disposition header field instances

  • [E2013] [MailApps] [JS] [Windows]: window.open from a mail app fails in Chrome and Firefox but works in IE

    I develop an Office Mail App which is used in Exchange 2013 On-Premises in my test lab. The mail app is hosted on IIS 8 (Windows Server 2012 R2) in the same LAN and ActiveDirectory domain.
    Opening popup windows from the mail app does only work in IE, not in Chrome and Firefox.
    Here are the details:
    The following server and domain names are changed to hide our internal names. I adjusted the error messages accordingly.
    Exchange 2013 is available at https://e13.some.dom/owa...
    The app content comes from https://server.some.dom/...
    Both the app and exchange server have valid SSL certicates.
    Both server URLs are listed in the popup exception lists of the browsers I use.
    The app generates html with an element which uses onclick to open another item in the same mailbox in a new browser window. Like so:
    <a onclick="window.open('https://e13.some.dom/owa/#viewmodel=ReadMessageItem&ItemID=SomeValidID', '_blank', 'width=600,height=400');">click me</a>
    Clicking that link in Internet Explorer (11.0.9600.17105; Update Versions: 11.0.7) opens a new browser window and shows the message specified with "SomeValidID". All good.
    When I use Chrome (Version 34.0.1847.131 m) the popup browser window opens. I see some progress text "Starting..." and "Almost there..." and then this error:
    something went wrong
    Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.
    X-OWA-Error: ClientError;exMsg=Blocked a frame with origin "https://e13.some.dom" from accessing a cross-origin frame.;file=Error: Blocked a frame with origin "https://e13.some.dom" from accessing a cross-origin frame.    at Error
    (native)    at new _a.$SQ (https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:301915)    at Function._z.$GG.$544 (https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:662161)    at Function.Program.main
    (https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:663563)    at invokeMain (https://e13.some.dom/owa/?bO=1:549:25)    at https://e13.some.dom/owa/?bO=1:601:15:552
    X-OWA-Version: 15.0.847.32
    X-FEServer: E13
    X-BEServer: null
    Date: 1/2/1601 2:52:00 PM
    Firefox 29.0 pops up the window as well. Shows "Starting..." and "Almost there..." and then this error (some text is german although the mailbox language is set to english, its basically the same error intro text like in Chrome):
    Da hat etwas nicht geklappt.
    Diese Informationen können wir momentan leider nicht abrufen. Bitte versuchen Sie es später noch mal. Kontaktieren Sie bitte Helpdesk, wenn das Problem weiterhin auftritt.
    X-OWA-Error: ClientError;exMsg=Permission denied to access property 'popOutManager';file=_a.$SQ@https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91_z.$GG.$544@https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91Program.main@https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91invokeMain@https://e13.some.dom/owa/?bO=1
    X-FEServer: E13
    Date: 08.05.2014 11:58:34
    In Firefox I see the popOutManager-access with "permission denied", but the popup window itself was already opened.
    Seems like the opened popup window tries to open another window?
    When I open up a new browser window in Chrome or Firefox manually and paste the URL (https://e13.some.dom/owa/#viewmodel=ReadMessageItem&ItemID=SomeValidID) manually in the address bar the message is shown correctly, so the URL itself does not seem to be
    the problem.
    Double clicking on messages in Chrome and Firefox opens those messages in new windows as well. So it does not seem to be a general popup problem in Chrome and Firefox as well.
    Any ideas how I get the popups from my mail app working in Chrome and Firefox as well?
    SvenC
    -- SvenC

    Hi
    I face the Same issue then I found that at the end of URL we  use "ispopout=1", I just remove this query string variable ant its work fine 
    The important thing is not to stop questioning - Albert Einstein

  • Anywhere Access - CERTIFICATE NOT VALID OR PASSWORD INCORRECT

    Setting up Server Essentials 2012.  During the "Anywhere Access" wizard I followed a link to get an SSL for the company's URL that is directed at the server.  I chose one of the two options that was presented during setup and purchased a "SSL
    Cert for SSL Certificate - Comodo Essential" from Enom Inc.
    Once I got the certificate in email, and continued the wizard I get the following error:
    CERTIFICATE NOT VALID OR PASSWORD INCORRECT
    Either the certificate is not supported or the password is incorrect.  Please try again.
    I've tried everything I can to get it in the wizard to no avail.  If I manually push it into the certificate manager it accepts it there properly but the Essentials Dashboard still thinks it's no installed so I believe I have to complete this wizard.  I
    cannot find ANY support on this currently on the internet on searching.  Anyone able to help?
    (By chance the server is also unable to install two critical updates.  I am taking things one at a time in the order they come right now though.)
    KevenD.

    The PFX file is only allowed in the wizard if you are importing a previously created SSL.  Here's the steps that got me to the dead end I'm in:
    Step 1 - Setup process - Set up Anywhere Access
    Step 2 – It asks what domain name we have pointing to the server, configures the firewall routing services etc and then gets to the SSL portion which I will depict below.
    Step 3 – Domain Set up in the Anywhere Access wizard: Entering name of our domain to use.
    Step 4 – SSL Certificate set up.  I select “I want to purchase..”, clicked on the two links provided, decided on one from eNomCentral and made the purchase.
    Step 5 – Cert request is issued and a link to GoDaddy and eNomCentral are given.  It was eNomCentral which sold me on the Comodo SSL.
    Step 6 – Park and wait. 
    The next time I go into the wizard to continue (once the certificate was issued) I get the errors I earlier depicted from the wizard stating:
    CERTIFICATE NOT VALID OR PASSWORD INCORRECT
    Either the certificate is not supported or the password is incorrect.  Please try again.
    I get two methods of importing it, copy/paste or upload.  I've tried both methods and each generates a different error.
    KevenD.

Maybe you are looking for

  • How to create a table in SAPscript

    Hello, I am quite new at SAPscript, and cannot figure out how to create a table in my main window. I have read this forum post : Script: tabs, boxes, tables but am having problems with the way to fill in tabs, so if someone could help me understand b

  • Using Time Capsule to back up two computers

    Hi, I want to use TC and TM for my imac and macbook. I was told that TC will automatically make a file for both if they are named differently. My imac back ups are fine. But my macbook backups, strangely, only backing up the desktop files. 1. How do

  • Regd : purchase order list in SAP

    hi, Is there  standard purchase order list available in SAP. <b><REMOVED BY MODERATOR></b> Message was edited by:         Alvaro Tejada Galindo

  • Not working - student access to private section

    I have a section within aug.edu that was allowing student access and now isn't allowing student access. The debug shows credentials are being passed properly and the time is current. The section is private and uses the credential COMT-3022-A-200808.

  • 3850 - auto qos voip cisco-phone

    I am having an issue where it appears that the "auto qos voip cisco-phone" command is marking down my voice packets COS and DSCP values to 0.  Anyone else notice this?  I am connecting Cisco 7945 phone to the interfaces with this command applied to t