SSO failing when sap transactions are accessed in portal thru internet

Hi,
We are accessing portal through internet on reverse proxy(Apache) but the SSO is failing when accessing sap transactions in portal but other screens(ESS) are accessible. Please let me know does this require any config settings in portal or apache side.
thanks i advance.
Marcus

Hi Rajender,
I tried doing the same in the ECC system but the iview is throwing error"resource not available".
We have given just an Apache Ip address in the format  <ipaddress>:80 as we doesn't have FQDN for the apache in the place of WebAs and ITS Host name.
Also the WEBAS path is /sap/bc/bsp/sap and ITS path is /sap/bc/gui/sap/its/webgui. Does this require any modifications.
Please also let me know for any changes need to be done on the httpd.config file on Apache server.
portal.xxxxx.xxx.xx  - Our External URL
hostname:port/irj/portal - Our Intranet URL
Please let me know the exact format of the entries to be made in ITS and Web As settings with the apache details.
Web AS Host Name :   Hostname:port
ITS Host Name :   Hostname:port
ITS Path  : /sap/bc/gui/sap/its/webgui
thanks in advance
Marcus

Similar Messages

  • HT5957 Unable to update. I phone keep getting this msg.   Unable to verify update iOS 7.0.2 failed verification because you are no longer connected to Internet

    Unable to verify update iOS 7.0.2 failed verification  because you are no longer connected to Internet

    I still haven't seen a solution to the problem "unable to verify update iOS 7.0.2 failed verification because you are no longer connected to internet"
    I did not have my iPhone plugged in to power during download, had plenty of power.
    Download burped once and restarted download.
    I got to the Verification step and it failed multiple times.
    I plugged in power, I turned off iPhone and restarted.
    I tried to do the download again and it goes to the Verify step
    and get the same error message.
    I do not have an Apple PC, but, have a Windows 8 PC.
    WIll iTunes help better manage the update?
    rdmayo

  • Accessing peoplesoft portal via internet, outside of your org network

    Hi,
    I want one component of HRMS to be able to be accessed outside of the network over the internet.
    It would be great if someone could give the steps needed to achieve this.
    PeopleTools 8.48
    Thanks,

    Hi Saurabh,
    it is bit complicated.
    As you Expose FQDN is different and you internal FQDN is different , you have to make some workaround.
    Follow below steps.
    1.
       The system which you have created on EP for calling backend system , you have make changes all in that.
        Changes mean every where in system where you have maintain the host name portal.server.com has to be replace by static.ip.com , by this changes when you will call the BSP from portal, it will redirect to http://static.ip.com:8000/sap/bsp/bc/sap/zbsp/default.html
    2.
    Now the problem is that when you will try access the portal from you internal network through URL :- http://portal.server.com:50000/irj/portal and when you will click on BSP , it will indirectly go to internet to resolve the URL :-  http://static.ip.com:8000/sap/bsp/bc/sap/zbsp/default.html  which is becuase we have made chnages in the system above.
    From internal network if you have to resolve URL http://static.ip.com:8000/sap/bsp/bc/sap/zbsp/default.html then you have to make the entry in host file which is like below
    static.ip.com              123.123.123.123
    From above workaround your URL will resolve from internet as well as from your internal network.
    This is all becauase you have dual stack , you have difference in FQDN.
    Any query pls reply.
    Thanks
    Anil
    Edited by: Anil Bhandary on Oct 13, 2009 2:50 PM

  • AddNode.sh fails when Voting Disks are placed in ASM

    Hi Forum, adding a node with addNode script throws an error when Voting disks are placed on ASM. Did anyone else had this issue or any ideas ?
    Thanks a lot for your help.
    [grid@host02 bin]$ sh -x ./addNode.sh -silent "CLUSTER_NEW_NODES={host01}" "CLUSTER_NEW_VIRTUAL_HOSTNAMES={host01-vip}"
    + OHOME=/u01/app/11.2.0/grid
    + INVPTRLOC=/u01/app/11.2.0/grid/oraInst.loc
    + ADDNODE='/u01/app/11.2.0/grid/oui/bin/runInstaller -addNode -invPtrLoc /u01/app/11.2.0/grid/oraInst.loc ORACLE_HOME=/u01/app/11.2.0/grid -silent CLUSTER_NEW_NODES={host01} CLUSTER_NEW_VIRTUAL_HOSTNAMES={host01-vip}'
    + '[' '' = Y -o '!' -f /u01/app/11.2.0/grid/cv/cvutl/check_nodeadd.pl ']'
    + CHECK_NODEADD='/u01/app/11.2.0/grid/perl/bin/perl /u01/app/11.2.0/grid/cv/cvutl/check_nodeadd.pl -pre -silent CLUSTER_NEW_NODES={host01} CLUSTER_NEW_VIRTUAL_HOSTNAMES={host01-vip}'
    + /u01/app/11.2.0/grid/perl/bin/perl /u01/app/11.2.0/grid/cv/cvutl/check_nodeadd.pl -pre -silent 'CLUSTER_NEW_NODES={host01}' 'CLUSTER_NEW_VIRTUAL_HOSTNAMES={host01-vip}'
    + '[' 1 -eq 0 ']'
    [grid@host02 bin]$
    Output from /u01/app/11.2.0/grid/cv/log/cvutrace.log.0:
    <snipped>
    TaskVotingDisk:Voting Disk:TASK_SUMMARY:FAILED:CRITICAL:VERIFICATION_FAILED
    ERRORMSG(GLOBAL): PRVF-5430 : Voting disk configuration does not meet Oracle's recommendation of three voting disk locations
    ERRORMSG(GLOBAL): PRVF-5431 : Oracle Cluster Voting Disk configuration check failed
    ERRORMSG(host01): PRVF-5449 : Check of Voting Disk location "ORCL:SPT_OCRVOTE01(ORCL:SPT_OCRVOTE01)" failed on the following nodes:
    ERRORMSG(host01): No such file or directory
    ERRORMSG(host01): PRVF-5449 : Check of Voting Disk location "ORCL:SPT_OCRVOTE02(ORCL:SPT_OCRVOTE02)" failed on the following nodes:
    ERRORMSG(host01): No such file or directory
    <snipped>
    Edited by: user12857528 on 14/11/2010 18:39

    Thanks Sebastian, brilliant - setting of IGNORE_PREADDNODE_CHECKS=Y did the trick !
    The only thing is that my neat 3 Voting disks are reduced to two only now:
    Before it was:
    [grid@host02 bin]# ./crsctl query css votedisk
    ## STATE File Universal Id File Name Disk group
    1. ONLINE 4dea88bcf2fa4f11bfdbcca6e3aade14 (ORCL:SPT_OCRVOTE01) [SPT_OCRVOTE]
    2. ONLINE 71e395e6e30e4febbf907305dc7827c6 (ORCL:SPT_OCRVOTE02) [SPT_OCRVOTE]
    3. ONLINE 187d3474f0fe4fe0bf5cec1bb35203ae (ORCL:SPT_OCRVOTE03) [SPT_OCRVOTE]
    Located 3 voting disk(s).
    where now it is:
    [grid@host01 bin]$ ./crsctl query css votedisk
    ## STATE File Universal Id File Name Disk group
    1. ONLINE 4dea88bcf2fa4f11bfdbcca6e3aade14 (ORCL:SPT_OCRVOTE01) [SPT_OCRVOTE]
    2. ONLINE 71e395e6e30e4febbf907305dc7827c6 (ORCL:SPT_OCRVOTE02) [SPT_OCRVOTE]
    Located 2 voting disk(s).
    and third disk is in mount_status closed after adding node host01.

  • SAP HR infotype access through portal

    Hi All,
    Below is the client requirement
    *They want to access an infotype "pa9016" in portal*
    In order to do is I have created a SAP Transactional iview and selected the system and in the Tcode area I have given the infotype name "pa9016".
    Assigned the iview to Role
    Now the problem I am facing is when i click on the Role I see the error message
    pa9016 tcode unknown
    My question is Can we access infotype using SAP Transactional iview.If not how to access the infotype in portal
    thanks in advance

    Hello All,
    It is not possible for you to create a transactional Iview for an Infotype in Portal.
    We have 2 options to access the PA info type 9016 in Portal
    1. Create a program in the back end system which will pull the data from the Info type 9016 and attach the program to the new ransaction code. Then create a Transactional Iview in Portal for this newly created transaction code.
    2. Add this Info type 9016 in the existing PA role (back end role). We can add the PA Info types in the following authorization objects
    P_ORGIN
    P_ORGINCON
    P_ORGXXCON
    P_PERNR
    The second option is recommended.
    Best Wishes,
    Suganthi.

  • ITunes skips when hard drives are accessed . . .

    Recently I had the processor replaced in my FW800 and since iTunes stops for a couple of seconds when processes that call upon any of the three other hard drives that are not the Boot Drive need to be accessed. Longer if the drive(s) are asleep. My music is not on the boot drive, has never been and until this replacement, this has never happened. I removed the three auxiliary drives while it was in the shop and I am thinking that the drive with my library got reinstalled on the secondary bus and not the primary that the Boot Drive is on. Could this be the problem?
    Any assistance will be greatly appreciated.
    Thank you.

    this is what i found hope its what is needed
    Intel ICH8-M AHCI:
    Vendor: Intel
    Product: ICH8-M AHCI
    Speed: 3 Gigabit
    Description: AHCI Version 1.10 Supported
    ST3320820AS_Q:
    Capacity: 298.09 GB
    Model: ST3320820AS_Q
    Revision: 3.BQE
    Serial Number: 9Q*
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 297.77 GB
    Available: 36.9 MB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    < Edited by Host >

  • SCCm 2012 R2 - OSD fails when multiple computers are getting built

    Hi everyone,
    I ran into a weird issue with my SCCM 2012 R2. I noticed when I build one computer with SCCM OSD, it works fine. But when I try to run more than one built at a time, only one usually works. The rest usually doesn't get apps installed in the task sequence,
    some don't get added to the domain etc. Any idea what it might be? Could it be that simultaneous connections to the distribution point are getting terminated and imaging fails?
    Appreciate your help! 

    Ok guys, this seems to be a false alarm here. It turns out I was missing a driver for ethernet card on my Dell T1600. I kicked off 3 Dell Optiplex 9020 and they all worked flawlessly. This is weird though, since I did install OS on some T1600 before and
    they all worked fine...
    Anyway, I downloaded the driver and added it to SCCM. I will kick off the install again today and see if that solved it.

  • Suspend fails when samba shares are mounted

    I have a weird problem with my laptop when I try to suspend to ram.
    If no samba share is mounted, then it suspends OK.
    If there is a samba share mounted, when I suspend through KDE menu or by the command "pm-suspend", then it fails to suspend, and in /var/log/pm-suspend I see the line "s2ram_do: Device or resource busy". If I type the command " s2ram -f" then it suspends OK.
    I have created a hook that executes "umount -a -t cifs" and now it suspends, but only if the samba share is available. If it is an unavailable it still fails to suspend.
    Does anyone has the same problem or a solution to this?
    P.S. I hope I posted in the correct category...

    Hi nanawel, i've a very similar problem to your on my home machine: this (https://bbs.archlinux.org/viewtopic.php?pid=1196319) is the thread i found when researching my problem, so i started investigating it and then discovered the samba shares problem, so i found out your problem when looking up for similar annoyances in Google.
    Have you been able to track it down?
    As i said in the other thread, i don't have installed any of those gnome-shell extensions, but i have the TweakTool->Desktop option named "Show mounted volumes on the desktop" enabled, as well as an entry in my /etc/fstab file: tomorrow i'm going to have some tries with my brother's pc and see if i can find out something more.. i'll keep posting on this thread then, since it looks like my problem is very very similar.. hopefully we'll be able to track it down this beast.
    But also, I'm also experiencing that "slow network share/choppy desktop" on my work machine only: it looked like a FUSE issue, but could never debug that since i've a quite important deadline at work and can't start debugging my OS during working hours
    Anatolik was kind enough to chime in and suggest to debug it (https://bbs.archlinux.org/viewtopic.php … 7#p1193437), this is the thread about it.

  • Query fails when large results are retrieved with Datacache enabled using Kodo 2.5.3.

    This is the last message received from the Kodo trace. The machine
    details are captured in the log files attached in the tar file. My kodo
    properties settings are provided below.
    2003-08-28 17:23:09,523 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] begin
    rollback
    2003-08-28 17:23:09,530 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] end
    rollback 1ms
    2003-08-28 17:23:09,539 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] begin
    rollback
    2003-08-28 17:23:09,544 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] end
    rollback 1ms
    2003-08-28 17:23:09,548 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] return
    [com.solarmetric.datasource.PoolConnection@db14d4[identityHashCode:30332961,wrapped:com.solarmetric.datasource.PreparedStatementCache$CacheAwareConnection@db14d4[identityHashCode:13592751,wrapped:com.mysql.jdbc.Connection@db14d4]:
    [requests=892;size=39;max=70;hits=852;created=40;redundant=0;overflow=0;new=40;leaked=0;unavailable=0]]]
    to [com.solarmetric.datasource.DataSourceImpl$SortablePool[min=0;
    max=100; size=2; taken=1]]
    2003-08-28 17:23:09,554 DEBUG [Thread-3] runtime.JDBCStoreManager
    (JDBCStoreManager.java:858) - Invalid execution manager reference count.
    Count should not be less than 0. Count was -1. Please contact
    [email protected] for more information.
    Kodo properties.
    # Kodo JDO Properties configuration
    # To evaluate or purchase a license key, visit http://www.solarmetric.com
    com.solarmetric.kodo.LicenseKey=@LICENSE_KEY@
    com.solarmetric.kodo.ee.ManagedRuntimeProperties=TransactionManagerName=java:/TransactionManager
    javax.jdo.PersistenceManagerFactoryClass=com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory
    javax.jdo.option.ConnectionDriverName=com.mysql.jdbc.Driver
    javax.jdo.option.ConnectionUserName=@DB_USER@
    javax.jdo.option.ConnectionPassword=@DB_PASSWORD@
    javax.jdo.option.ConnectionURL=@DB_URL@?useUnicode=true&characterEncoding=UTF-8&autoReconnect=true
    javax.jdo.option.MinPool=0
    javax.jdo.option.MaxPool=100
    javax.jdo.option.Optimistic=true
    javax.jdo.option.RetainValues=false
    javax.jdo.option.NontransactionalRead=false
    javax.jdo.option.IgnoreCache=false
    com.solarmetric.kodo.FlushBeforeQueries=true
    com.solarmetric.kodo.DataCacheClass=com.solarmetric.kodo.runtime.datacache.plugins.CacheImpl
    com.solarmetric.kodo.RemoteCommitProviderClass=com.solarmetric.kodo.runtime.event.impl.JMSRemoteCommitProvider
    com.solarmetric.kodo.RemoteCommitProviderProperties=Topic=topic/KodoCacheTopic
    com.solarmetric.kodo.PersistentTypes=com.ewarna.pdm.entities.IDCounter,\
    com.ewarna.pdm.entities.AbstractEntity,\
    com.ewarna.pdm.entities.achievability.AchievabilityResult,\
    com.ewarna.pdm.entities.achievability.ActualCondition,\
    com.ewarna.pdm.entities.achievability.Condition,\
    com.ewarna.pdm.entities.achievability.ConditionGroup,\
    com.ewarna.pdm.entities.achievability.ConditionLabel,\
    com.ewarna.pdm.entities.achievability.DyeGroupPE,\
    com.ewarna.pdm.entities.achievability.DyePairPE,\
    com.ewarna.pdm.entities.achievability.DyeSetPE,\
    com.ewarna.pdm.entities.achievability.DyeStuffPE,\
    com.ewarna.pdm.entities.achievability.DyeloadPE,\
    com.ewarna.pdm.entities.achievability.FormulationJobPE,\
    com.ewarna.pdm.entities.achievability.FormulationJobTemplatePE,\
    com.ewarna.pdm.entities.achievability.Material,\
    com.ewarna.pdm.entities.achievability.ProcessPE,\
    com.ewarna.pdm.entities.achievability.RecipeOutputCriteriaPE,\
    com.ewarna.pdm.entities.achievability.RecipePE,\
    com.ewarna.pdm.entities.achievability.SubstratePE,\
    com.ewarna.pdm.entities.colorimetry.CIELabSearchIndexPE,\
    com.ewarna.pdm.entities.colorimetry.ReflectancePE,\
    com.ewarna.pdm.entities.colorimetry.ReflectanceSetPE,\
    com.ewarna.pdm.entities.colorimetry.SpectroPE,\
    com.ewarna.pdm.entities.management.CustomerPE,\
    com.ewarna.pdm.entities.management.SupplierPE,\
    com.ewarna.pdm.entities.storage.AccountPE,\
    com.ewarna.pdm.entities.storage.BagPE, \
    com.ewarna.pdm.entities.storage.DatasetPE,\
    com.ewarna.pdm.entities.storage.EntityAttributeFieldPE,\
    com.ewarna.pdm.entities.storage.EntityAttributeKeyPE,\
    com.ewarna.pdm.entities.storage.EntityAttributePE,\
    com.ewarna.pdm.entities.storage.EntityTemplatePE,\
    com.ewarna.pdm.entities.storage.SessionPE,\
    com.ewarna.pdm.entities.storage.SharedInfo2PE,\
    com.ewarna.pdm.entities.storage.UserPE,\
    com.ewarna.pdm.entities.storage.VirtualFolderPE

    Also, note that this is not necessarily a fatal condition -- it is merely
    an unexpected one. Are you seeing any exceptions before or after this
    message is printed out that are related to activity on Thread-3?
    -Patrick
    On Thu, 28 Aug 2003 18:48:14 +0800, Makas Tzavellas wrote:
    This is the last message received from the Kodo trace. The machine
    details are captured in the log files attached in the tar file. My kodo
    properties settings are provided below.
    2003-08-28 17:23:09,523 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] begin
    rollback
    2003-08-28 17:23:09,530 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] end
    rollback 1ms
    2003-08-28 17:23:09,539 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] begin
    rollback
    2003-08-28 17:23:09,544 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] end
    rollback 1ms
    2003-08-28 17:23:09,548 DEBUG [Thread-3] datasource.DataSourceImpl
    (DataSourceImpl.java:313) - [ C:14357716; T:2310757; D:20217139 ] return
    [com.solarmetric.datasource.PoolConnection@db14d4[identityHashCode:30332961,wrapped:com.solarmetric.datasource.PreparedStatementCache$CacheAwareConnection@db14d4[identityHashCode:13592751,wrapped:com.mysql.jdbc.Connection@db14d4]:
    [requests=892;size=39;max=70;hits=852;created=40;redundant=0;overflow=0;new=40;leaked=0;unavailable=0]]]
    to [com.solarmetric.datasource.DataSourceImpl$SortablePool[min=0;
    max=100; size=2; taken=1]]
    2003-08-28 17:23:09,554 DEBUG [Thread-3] runtime.JDBCStoreManager
    (JDBCStoreManager.java:858) - Invalid execution manager reference count.
    Count should not be less than 0. Count was -1. Please contact
    [email protected] for more information.
    Kodo properties.
    # Kodo JDO Properties configuration
    # To evaluate or purchase a license key, visit http://www.solarmetric.com
    com.solarmetric.kodo.LicenseKey=@LICENSE_KEY@
    com.solarmetric.kodo.ee.ManagedRuntimeProperties=TransactionManagerName=java:/TransactionManager
    javax.jdo.PersistenceManagerFactoryClass=com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory
    javax.jdo.option.ConnectionDriverName=com.mysql.jdbc.Driver
    javax.jdo.option.ConnectionUserName=@DB_USER@
    javax.jdo.option.ConnectionPassword=@DB_PASSWORD@
    javax.jdo.option.ConnectionURL=@DB_URL@?useUnicode=true&characterEncoding=UTF-8&autoReconnect=true
    javax.jdo.option.MinPool=0
    javax.jdo.option.MaxPool=100
    javax.jdo.option.Optimistic=true
    javax.jdo.option.RetainValues=false
    javax.jdo.option.NontransactionalRead=false
    javax.jdo.option.IgnoreCache=false
    com.solarmetric.kodo.FlushBeforeQueries=true
    com.solarmetric.kodo.DataCacheClass=com.solarmetric.kodo.runtime.datacache.plugins.CacheImpl
    com.solarmetric.kodo.RemoteCommitProviderClass=com.solarmetric.kodo.runtime.event.impl.JMSRemoteCommitProvider
    com.solarmetric.kodo.RemoteCommitProviderProperties=Topic=topic/KodoCacheTopic
    com.solarmetric.kodo.PersistentTypes=com.ewarna.pdm.entities.IDCounter,\
    com.ewarna.pdm.entities.AbstractEntity,\
    com.ewarna.pdm.entities.achievability.AchievabilityResult,\
    com.ewarna.pdm.entities.achievability.ActualCondition,\
    com.ewarna.pdm.entities.achievability.Condition,\
    com.ewarna.pdm.entities.achievability.ConditionGroup,\
    com.ewarna.pdm.entities.achievability.ConditionLabel,\
    com.ewarna.pdm.entities.achievability.DyeGroupPE,\
    com.ewarna.pdm.entities.achievability.DyePairPE,\
    com.ewarna.pdm.entities.achievability.DyeSetPE,\
    com.ewarna.pdm.entities.achievability.DyeStuffPE,\
    com.ewarna.pdm.entities.achievability.DyeloadPE,\
    com.ewarna.pdm.entities.achievability.FormulationJobPE,\
    com.ewarna.pdm.entities.achievability.FormulationJobTemplatePE,\
    com.ewarna.pdm.entities.achievability.Material,\
    com.ewarna.pdm.entities.achievability.ProcessPE,\
    com.ewarna.pdm.entities.achievability.RecipeOutputCriteriaPE,\
    com.ewarna.pdm.entities.achievability.RecipePE,\
    com.ewarna.pdm.entities.achievability.SubstratePE,\
    com.ewarna.pdm.entities.colorimetry.CIELabSearchIndexPE,\
    com.ewarna.pdm.entities.colorimetry.ReflectancePE,\
    com.ewarna.pdm.entities.colorimetry.ReflectanceSetPE,\
    com.ewarna.pdm.entities.colorimetry.SpectroPE,\
    com.ewarna.pdm.entities.management.CustomerPE,\
    com.ewarna.pdm.entities.management.SupplierPE,\
    com.ewarna.pdm.entities.storage.AccountPE,\
    com.ewarna.pdm.entities.storage.BagPE, \
    com.ewarna.pdm.entities.storage.DatasetPE,\
    com.ewarna.pdm.entities.storage.EntityAttributeFieldPE,\
    com.ewarna.pdm.entities.storage.EntityAttributeKeyPE,\
    com.ewarna.pdm.entities.storage.EntityAttributePE,\
    com.ewarna.pdm.entities.storage.EntityTemplatePE,\
    com.ewarna.pdm.entities.storage.SessionPE,\
    com.ewarna.pdm.entities.storage.SharedInfo2PE,\
    com.ewarna.pdm.entities.storage.UserPE,\
    com.ewarna.pdm.entities.storage.VirtualFolderPE--
    Patrick Linskey
    SolarMetric Inc.

  • Website redirect when mobile divice are accessing  the website..

    Hi
    Im Coding in "asp" and are looking for at piece of code that can track and redirect my "Normal" website to my "Mobilewebsite" ( my mini site for the iphone)
    /BoogieMan

    come on anyone??

  • Java is not working when I try to access a "portal" in my company's intranet.

    Nothing loads, but if I run the same page on internet explorer, it loads and I see a little popup saying that Java is being used.
    == URL of affected sites ==
    http://maconomy.rgl.com/cgi-bin/Maconomy/MaconomyPortal.rglprod.RGLUS.exe/Framework/maconomyportalmain.msc?javaVersion=16.3-b01
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

    You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Access BI Portal thru Enterprise Portal

    Hi,
    I have created a web page on my intranet with direct http links to my BI Reports that go through our Enterprise Portal for Single Signon reasons.  I would like to create a single link on my intranet that would present the BI Portal directly.  The link should go through the Enterprise Portal like the reports links do
    Here's an example of my report link.
    https://<server>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=gp%3A<consumer alias>/pcd%3Aportal_content/content_folder/bi_folder/bi_projects_folder/ZDWNBI/ZDW_IVIEWS/<Report ID>
    Is there anyway to create a direct link to my BI Portal going through my Enterprise Portal?
    Thanks, Ken Murray

    Hi Kenneth,
    You can configure SSO between EP ("regular") portal to the BI portal.
    1) Export the the EP6 certificate and import it to the BI portal.
    2) Add the EP6 to the ACL of the BI portal.
    3) Create html iview in EP6 the points the report in the BI portal (no logon screen should appear...)
    see: http://help.sap.com/saphelp_nw04/helpdata/en/62/c0503e1dac5b46e10000000a114084/frameset.htm
    This is very similar to configuring the BI portal to accept ticket from BW application server.
    Regards,
    Omri

  • 'Access is denied' error in ESS iViews & Page not displayed' thru. internet

    Hi,
      We are implementing <b>ESS(Webdynpro)/MSS(Java)</b>.
      We are in EP6 SP13.
      We want to put our portal on internet through SSL.
    I have installed SAP Webdispatcher and configured it to support SSL. SAP webdispatcher is installed on a DMZ machine(hostname: SAPROUTER).
    <i>webdispatcher ports:</i>
    http port: 80
    https port: 8443
    1) When i try to access the portal from the DMZ machine (where the webdispatcher is installed) using <b>https://saprouter.domainname.net:8443/irj/portal</b>, i am able to see all the iViews.. but, i am getting '<b>access is denied</b>' error(in the status bar) when i try to click on any link in ESS iViews (for ex: working time, Employee search).. when i try to double click i am getting javascript:void(0)
    2) When i try to access the portal through internet(<b>https://<ipaddress>:8443/irj/portal</b>), I get the logon page and after logging in... i am not able to see the ESS and Transaction iViews .. getting 'Page cannot be displayed' error.
    When i am able to see the iViews in the DMZ machine.. why are they not being displayed when i access through internet??
    Can any1 help me in this regard?? What am i missing ??
    Awaiting your reply.
    Regards,
    SK.

    It’s a hot topic I think,
    Where facing the exact same problems.
    When we logon ‘LOCAL’ to the Portal the iview works. (Not true the internet / DMZ)
    But when we logon true the webdispatcher we get the Portal Layout, so the dispatcher works.
    But the WEBdynpro Iview gives the error -> ‘Page not displayed'
    And when we edit the file “hosts” on the pc of the client browser and fill in the hostname of the SAP Portal the Iview works…..???
    There are no ports closed on the firewall, everything is allowed.
    Can anyone tell me of it’s necessary to edit the Web Dynpro Runtime Environment. Here are some settings for the WEBdispatcher but I can’t get it working.
    -     sap.webdispatcher.host           = Defines the host of a used Web Dispatcher
    -     sap.webdispatcher.port            = Defines the port of a used Web Dispatcher
    -     sap.webdispatcher.protocol      = Defines the protocol of a used Web Dispatcher
    See the link -> http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/frameset.htm
    When I activate the trace on the webdispatcher
    (D:webdispsapwebdisp.exe pf=D:webdispsapwebdisp.pfl -t 2)
    In the Tracefile I can see that the webdispatcher resolves the SAP portal system. That’s was aleady confirmed by seeing the portal framework from the client. I think that the WEBdynpro’s have to be remote activated, or some addition settings in the webdispatcher.
    If somebody get an idée I really would like to know it.
    Best regards,
    Edwin

  • Missing permission when calling sap transaction via composer

    Hello,
    we have created a complex model. in this model some sap transaction are called.
    With Administrator rules everything is working fine.
    but when portal role is assigned to a normal user, only real composer parts are working and all url ivew calling an sap transaction are failing.
    where do I have to adjust permission ?
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Access denied (Object(s): portal_content/com.sap.pct/templates/iviews/com.sap.portal.sap_transaction_iview).
    Exception id: 11:20_14/02/08_0022_6998651
    See the details for the exception ID in the log file
    Thanks

    Hi Uwe,
    i guess you're calling the "pcd:portal_content/com.sap.portal.migrated/ep_5.0/templates/com.sap.portal.appintegrator.sap.bwc.TransactioniView" with some parameters (system, tcode, etc.). You have to add this iview to your models role (our change the permissions of the iview). To hide in the navigation, edit the iview preference: com.sap.portal.navigation.Invisible (German: Unsichtbar in Navigationsbereichen) -> change it only in the role->iview, do not change it in the iview itself.
    Hope that helps!
    Benny

  • Field's content is not fully  visible in  Sap Transaction iview

    Hello Friends,
                    I have deployed a Sap Transaction iview on my portal. I am facing a issue.  When i do F4 help on a field, the content of columns is not fully visible in the opened up popup window.
        Is there any way to adjust the colum width, so that it accomodates the whole content and doesn't truncate it ?
        please help !
    Regards,
    Vidit

    Hi Vidit,
    Try to check your Transaction iview directly from the browser / through services not through the EP. If the iview is not working fine then thre is a problem in the code otherwise it has to work
    Check your code and try to redeploy
    Regards,
    sreedhar G

Maybe you are looking for