Ssrs 2008 and Kerberos both work separately; but not together

Sorry that this question is very similar to some others that have been asked on this forum. Unfortunately, none of the solutions I've been able to find here or elsewhere have solved my problem.
I'm trying to create some reports on data in a SharePoint site. SharePoint is version 2010 and my SQL Server Reporting Services (SSRS) is running off of SQL Server 2008 (NOT 2008 R2). Both these systems have been in use by my organization for some time and
sadly upgrading them is not practical in the immediate future.
I know that I have Kerberos working properly on the Reporting Server because I created a test report that draws data off of another SQL Server -- not a SharePoint site -- and I can demonstrate a successful double-hop by running that report from a client
machine such as my development PC. (authenticates client -> ssrs server -> data server with no problems)
Since SSRS 2008 and SharePoint 2010 aren't directly compatible (from what I've been able to find) I've set up SharePoint as an XML data source within my report. I know that the data source is working and authenticating on it's own, because
if I access the report server web service directly from the machine that's hosting SSRS, I can run my SharePoint XML data source report properly.
However, when I try to run the SharePoint XML data source from a client machine (thus requiring a double-hop) I receive the following error:
The remote server returned an error: (401) Unauthorized. (rsXmlDataProviderError)
All of my SharePoint web applications are set up to use Kerberos authentication, all of my SharePoint and SSRS service accounts are set up for delegation, and I've checked my SPN's numerous times to ensure that there are no duplicates and that all involved
servers and ports have been accounted for. My SSRS config file has authentication set to "Negotiate."
I'm obviously missing something, but I've reached the point where reading troubleshooting guides and set up instructions is just leaving me repeating things I've already tried. If anyone has any advice that could point me in the right direction on this problem,
I would greatly appreciate it!

Hi,
Have you checked the following similar article if you used the "Credentials stored securely in the report server" option? Please let us know your results.
http://stackoverflow.com/questions/15033100/error-while-passing-credentials-from-ssrs-to-sharepoint-data-source
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ab4ce91f-f1db-4567-a40a-7a11d02cbc05/ssrs-and-sharepoint-list-the-remote-server-returned-an-error-401-unauthorized?forum=sqlreportingservices
http://blogs.technet.com/b/rob/archive/2011/11/23/enabling-kerberos-authentication-for-reporting-services.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Similar Messages

Bluetooth keybord and trackpad work separately, but not together

Hi Everyone, I just bought an apple wireless keyboard and magic trackpad. The both connect to bluetooth and work fine, if used separately. But if you connect both at the same time, the keyboard works, but the trackpad doesn't. As soon as you disconnect the keyboard, the trackpad works great, until you try to reconnect the keyboard. I've removed and added both several times, rebooted, etc, but no luck. Any ideas?

I've tried that, but neither the smc or pram reset worked... I know the keyboard and trackpad work (as they work on my mbp together) and the bluetooth seems to work ok (works with bluetooth headphones and either keyboard or trackpad), but I can't get the keyboard and trackpad to work together still...

ColdFusion 4.5 & Oracle 8.1.6 - Both work fine but not together!

Hi everyone,
We installed Oracle 8.1.6 and ColdFusion 4.5 on RedHat 6.2. Both individually work fine, but we cannot get the combination to work.
SqlPlus gets a connection to a remote server, so the tnslistener configuration works. We tried both the ODBC and native drivers, but the connections never verify O.K.
The only thing we worry about is that the script that CF provides for relinking of the libclntsh.so stops with an error:
(...)/8.1.6/lib naldflgds not found
ld: cannot find -lsql
We already tried the suggestion of Borren Jeng (run gennaflg from $ORACLE_HOME/bin). Regretfully this gennaflg also doesn't exist, so this didn't work for us...
We really got stuck here, so any suggestions are greatly appreciated!
- Richard.

The naldflgds is only exist in V8.0.5.
Here is what yo can try:
you only need to do the folling things.
1. copy $ORACLE_HOME/lib/libclntsh.so to CFUSN/lib
2. you need to chmod for your $ORACLE_HOME directory to allow the Coldfusion owner execute the file under $ORACLE_HOME. I don't remeber what the exaclty number need for chmod on $ORACLE_HOME, but you can try
"chmod -R 8.1.6" (if you $ORACLE_HOME=/home/oracle/app/product/8.1.6 you should cd to =/home/oracle/app/product)This should work. but this cause another seurity issue.
The only thing we worry about is that the script that CF provides for relinking of the libclntsh.so stops with an error:
(...)/8.1.6/lib naldflgds not found
ld: cannot find -lsql
We already tried the suggestion of Borren Jeng (run gennaflg from $ORACLE_HOME/bin). Regretfully this gennaflg also doesn't exist, so this didn't work for us...
We really got stuck here, so any suggestions are greatly appreciated!
- Richard.
Originally posted by Richard ([email protected]):
Hi everyone,
We installed Oracle 8.1.6 and ColdFusion 4.5 on RedHat 6.2. Both individually work fine, but we cannot get the combination to work.
SqlPlus gets a connection to a remote server, so the tnslistener configuration works. We tried both the ODBC and native drivers, but the connections never verify O.K.
null

I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

My slash key doesnt work - it selects text if Im in a form, or shows a thin bar. I remaped keyboard (Linux) and other progs work OK, but not firefox.

I'm using Linux Mint in a Lenovo S400 lap-top. I had to remap my slash key for X because the scancode of the key is actually Right-Ctrl (go figure!), and all my programs are recognizing this configuration. But in firefox my remapping takes no effect, and the slash key actually selects text if I'm in a form, or makes a thin bar appear at the bottom of the screen.
Any help is welcome!

Can you reproduce in safe mode or a new profile?
* [[Troubleshoot Firefox issues using Safe Mode]]
* [[Use the Profile Manager to create and remove Firefox profiles]]

I have partitions in my external hard drive, and it was working fine. but not the oy, I have partitions in my external hard drive, and it was working fine. but not the other partition says you can only read. how to solve it ? help me

Mu external hard disk partition is not working. In get info it says that "hou can read only" bow can I fix this?

Read this:
http://smallbusiness.chron.com/fix-permissions-imac-external-hard-drive-48257.ht ml

IHome and iPod both 30 pin but not fitting

Hi there, I am hoping somebody can help me.
I was given an iHome iP87. 30 pin old connector.
Below is the iPad I have (released in 2006 so 30 pin old connector)
Apple iPod 5th Gen (with Video) 30 GB, 60 GB Specs
Identifiers: iPod with Video - MA002LL/A* - A1136
The site for the iP87 indicates that the two product should be compatible; however, the iPad bottom is square and the docking station on the iHome device is more oval in shape so, as a result, the two don't fit.
Is there a slot adapter of some sort that I need to purchase? I asked the site support and they said I needed the lightning adapter which is totally wrong as it's an old iPod.
If anyone could specifically tell me what I need that would be great.
Thanks.

Since MA002LL/A indicates an iPod 5th Generation (released October 2005) - not an iPad or an iPod Classic, I think we'll assume you have the 5th generation iPod (with video). However, you haven't stated whether you have a 30GB or 60GB model - and there is a difference.
Perhaps the problem is you are trying to use the wrong dock adaptor in the iHome. In the image below of the iHome, notice the black area. That's the adaptor, which sits in the connector well. Each model of iPod has a different adaptor. Remove the adaptor that's in the iHome and fit the correct one.
From what I can tell, the 30GB 5th generation iPod uses adaptor #9, while a 60GB 5th generation iPod uses adaptor #10.
Have a look at this Apple page for more information; http://support.apple.com/kb/HT1380

[AS3] EventDispatcher works locally but not remotely

Hi,
I am very new to Action Script and have the following
problem. I hope someone can point me in the right direction.
I have a small video player app. I have added the FLVPlayback
component to the stage and set some properties via action script
(AS 3)
I then instantiate a class to go and retrieve some XML,
register an eventListener to wait for the XML to be loaded and once
the event has fired, load the FLV file (just hard coded at the
moment) into the FLVPlayback object.
This works when testing in the Flash IDE but not when I
publish the movie to my webserver. I have tried commenting out the
player.load() and just adding a textfield and again this works
locally but not when I publish to the webserver. I have included
some code snippets below.
Can anyone tell me where I am going wrong?
Any pointers much appreciated.
Thanks
Martin

Hi,
I found the problem if anyone has the same issue. I was
passing some FlashVars in incorrectly using the
AC_RunActiveContent.js that comes with Flash. I have switched to
swfobject and all is well.
thanks

Can I install a second card and have both work?

I am a Ham Radio operator. I have a Pavilion HPe desktop running windows 7 64. I would like to install a second sound card that would be used for Ham Radio digital modes and I would leave the onboard sound as default to run normal play back functions. I tried this with a Sound Blaster XFI Extreme PCIe card (SB1040). I got the card to work but it uninstalled the onboard card or the system would not recognize it. Is it possible to have two sound devices and they both work? I did this with an XP system no problem.
Thanks
Dave

based on some quick analysis you can use specific software to determine what you want to use as output. so check the software with the ham radio software to use whatever card is greyed out in the options on windows 7 and use that. What you want to do IS possible. we just need to figure out how to get it done.
so in theory, windows could be onboard, and your ham radio software program could use the dedicated card, you will just need to play with options. see if that helps
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which ar

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which are current on IOS. Help!

the wifi router could also be blocking
and to really test if the windows firewall is the problem then try turning it off!
if that scare you too much then disable the internet modem / cable modem or the likes while you test
always remove more and more factors when troubleshooting sooner or later it will work and you can narrow down which factor did the job and work on that

Asound.conf making PCM volume and alsaequal both working

In my case, actually, my asound.conf does not allow to have PCM vol. and alsaequal both working.
asound.conf :
ctl.equal {
type equal;
pcm.plugequal {
type equal;
# Modify the line below if you don't
# want to use sound card 0.
# slave.pcm "plughw:0,0";
# or if you want to use with multiple applications output to dmix
slave.pcm "plug:dmix";
# pcm.equal {
# [u]only PCM volume works for normal user tested with songbird[/u]
# [u]only alsaequal works for ncmpcpp with a separated mpd user[/u]
# Or if you want the equalizer to be your
# default soundcard uncomment the following
# line and comment the above line.
pcm.!default { # [u]only alsaequal works[/u]
type plug;
slave.pcm plugequal;
Output of aplay -l :
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: Conexant Digital [Conexant Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: INTEL HDMI 0 [INTEL HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Output of aplay -L :
null
Discard all samples (playback) or generate zero samples (capture)
front:CARD=Intel,DEV=0
HDA Intel, CONEXANT Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, CONEXANT Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, CONEXANT Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, CONEXANT Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, CONEXANT Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, CONEXANT Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, Conexant Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=Intel,DEV=0
HDA Intel, INTEL HDMI 0
HDMI Audio Output
Anyone has an idea of how I can have PCM volume and alsaequal both working ?
Last edited by ramboman (2010-05-16 06:09:54)

up

My MacBook Air keeps asking me for my yahoo password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password/account.

my MacBook Air keeps asking me for my YAHOO password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password.

I've got automatic downloads turned off and I tried signing out and in via the settings and still keeps asking me for an apple id.
It doesn't do it continuously, it'll just pop up randomly ... if the phone is just sitting there it may ask for my apple id and regardless of whether I press cancel or enter my password nothing happens .. it may be another 2mins, 5mins, 15mins but eventually it'll just randomly pop up and ask me again. It does accept my password though because I tried entering an incorrect password to see what happens and it gives me the error saying it's incorrect, so when I enter the correct one in the box disappears and it accepts it as I say, but only for so long before it pops up again.

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?

If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

See:
* http://kb.mozillazine.org/Browser_will_not_start_up

HT1386 my Ipod will not connect to my computer it worked yesterday but not today and it is only a new ipod touch, it will not even be recognised on my itunes but yet it can charge off my computer. need help!

it worked yesterday but not today and it is only a new ipod touch, it will not even be recognised on my itunes but yet it can charge off my computer. need help!

iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows

Ssrs 2008 and Kerberos both work separately; but not together

Similar Messages

Maybe you are looking for