SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error
I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan
I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.
Similar Messages
-
Hi,
A very helpful postee got to the end of his knowledge level, so I am posting this for you tech guys to sort out. Bit long because I've tried to set it out step by step. Briefly I'm new to iTunes and my laptop has a very small hard drive and is virtually full and due to be replaced. So I want to use an external hard drive.
Now I know that iTunes installs itself to two locations: 1. Programs Files 2. Music. And its the Music location that bothers me.
I asked about using an external hard disk to store the actual AAC files. I was advised that in order to change the loaction of the iTunes media folder I was should employ preferences/advanced/ and this is what i saw (as you would expect):
Then I hooked up my hard drive, hit 'change', and this is what I saw:
I was a bit worried by the lack of pathway details, but assumed it must have done something on the external drive, so I looked on it and this is what i saw (highlighted):
But compare this with what was in the directory I attempted to reproduce, viz in the iTunes folder in /laptop/Music/iTunes:
A ton of stuff. The only stuff that corresponded with what iTunes had created on my external hard drive was in Music/iTunes/iTunes Media folder:
Now this suggests that there are TWO locations for my preferences. The advanced tab only allowed me to ADD an extra location, not REPLACE the original.
So:
1. Which of the two locations will iTunes choose when I add music? Surely it will go with the original pathway laid down in the directory when iTunes was installed, and ignore my external Hard Drive? I mean, how can there be two automatic locations?!!!
2.. I don't mind itunes library being on my laptop as this is just a list, but it obvoiusly has to have a pathway to the site where the actual AAC files are stored.
so surely it won't work unless the whole lot is on the external hard drive: library, extras, genius, the lot?
4. How then do I get it all on the external since merely changing "preferences" doesn't do the job?
5. Is this perhaps the reason why so many people report that iTunes does not recognize their external hard disk:
http://www.ehow.com/info_12199596_external-hard-drive-not-recognized-itun es.html
I just don't want this to happen to me. Any answers?
Philip Joy
UNITED KINGDOMAs I've replied to your other threads...
Easy method 1:
Move or Copy entire working library from current location to the root of your external drive. Press & hold down shift (option on a Mac) as you click the icon to start iTunes. Click Choose when prompted, then browse to ..\iTunes\iTunes Library.itl on the external. If you copied the library across then test your new library works properly after renaming the original folder, before deleting the original folder to recover space.
Easy method 2:
If you haven't really started to build your library. Press & hold down shift as you click the icon to start iTunes. Click Create. Browse to the root of the external drive. Create the library as ITunes. Drag your media into ..\iTunes\iTunes Media\Automatically Add to iTunes.
Complex method:
Required if you've already tried other things and now have media & library scattered around. See the post make a split library portable.
in addition...
In all cases the idea is to get a library folder called iTunes containing a media folder called iTunes Media with all media inside this media folder. Once you have the library in this shape it is easy to reconnect to the library with the shift-start-iTunes method if the drive letter changes, move the library to another computer, and backup the library by cloning the folder to another drive.
tt2 -
I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine. -
Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTMHi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support -
I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!
OK Let's take a step back.
If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event. -
Hi All,
I am using SharePoint List Connectors to load the data from Sharepoint list to Sql server.
I have created an ssis package and attached to the SQL agent job in works fine
SharePoint Source dev url : http://company.dev.com (working fine)(http)
DB server:(server\instance)
I thought all i good and can test with the uat sharepoint url.
I have changed the configuration url yo point to uat.(https)
SharePoint Source dev url : https://companyuat.dev.com (working fine)
DB server:(server\instance)
Suddently it fails when with the following error:
In both the cases i am running the agent job from the same db server
DB server:(server\instance)
Error Message:
Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source: Data Flow Task SharePoint List Source [1] Description: System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Is there is workaround to reslove this?Any inputs highly appreciated as it is time to move to production :(.
Thanks
Ravi
RaviThis is the important error: The remote certificate is invalid according to the validation procedure.
Your SharePoint server certificate is invalid. You have to either correct your certificate or make your SSIS client machine explicitly trust the server certificate.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/ -
OSD Task Sequence fails with "There are no task sequences available for this computer"
Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell. -
There is not enough memory error with 8gb installed
Description:
I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
It reads:
There is not enough memory to complete the operation.
To increase available memory, close other open documents or applications.
But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
Steps already taken:
Tried copying after a system restart with no other programs running.
Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
I reinstalled Flash
I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
Any help would be greatly appreciated!
P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.Thanks for chiming in Mataxia.
One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this... -
SSRS 2008 - hide chart lines based on parameter selected
How to control visibility of chart lines based on Params selected by user?
By default, my report display last 3 years worth of data (including current) with Month on the x axis and Counts on the y axis. I have two Boolean parameters:
TwoYrs? T/F
ThreeYrs? T/F
if False is selected for TwoYr and ThreeYr parameters then I want to hide chart lines corresponding to last year and the year before.
What I've tried: Created 3 Series groups with filters. eg. YearSeries1 to return only current year data and applying an expression to display it if params TwoYrs and ThreeYrs = False. and so on for YearSeries2 to return current + last
years data if param TwoYrs is True and ThreeYrs = False. But I don't see where to add expression to control the display of the individual series groups. I am open to any way of doing this, but this seemed most logical.Hi Ok-Hee,
In your Source Query just need to filter the series data based on the Parameters.
I have written sample query below:-
select * from
select 1 monthnumber , 'Jan' MonthName, 2013 year,100 amount
union
select 1 monthnumber , 'Jan' MonthName, 2014 year ,200 amount
union
select 1 monthnumber , 'Jan' MonthName, 2015 year , 300 amount
union
select 2 monthnumber , 'Feb' MonthName, 2013 year, 300 amount
union
select 2 monthnumber , 'Feb' MonthName, 2014 year, 350 amount
union
select 2 monthnumber , 'Feb' MonthName, 2015 year,200 amount
union
select 3 monthnumber , 'Mar' MonthName, 2013 year, 380 amount
union
select 3 monthnumber , 'Mar' MonthName, 2014 year, 100 amount
union
select 3 monthnumber , 'Mar' MonthName, 2015 year, 500 amount
)t
where year in (
select distinct FilterYear from
select case when @TwoYrs=1 then year(getdate())-1 else year(getdate()) end FilterYear
union
select case when @TwoYrs=1 and @ThreeYrs =1 then year(getdate())-2 else year(getdate()) end FilterYear
union
select year(getdate()) FilterYear
) t
I have created one post in my blog , you can check the result.
https://msbitips.wordpress.com/2015/03/12/ssrs-2008-hide-chart-lines-based-on-parameter-selected/
Thanks
Prasad -
SSRS 2008 Line Chart Issue.
We are facing an issue with SSRS 2008 charts. We have a report which shows dynamic number of series on a line chart. The data values may not exist for all series for
the same x axis points. We expected SSRS to connect the missing points as average and have set the empty point option to average.
The issue is that the
1)
lines for interpolated points only appear when we set the color of empty point to say red and not when it is set to automatic. We need the interpolated line in the same auto
colour as the original line as we will have markers for the data points from the DB and no markers for empty points.
2)
The interpolated lines extend backwards in the series also – we expect it to only fill the gaps and not extend backward or forward.
Are these issues known and is there a work around for these issues ? We got your name from one of the SSRS community discussions. Could you please connect us with
the right person if you are not the right contact for this issue ?
I also got following reply from one of the MS guy, it says
Hi Akshay,
The lines should not go backward. I have seen this happen before and I’ll have to double-check on what that occurs. If you
are using a Category Axis, make sure you set the sorting to use a Cdate() expression. I think that might be it ,but I’ll have to double check.
As far as using the auto-coloring on the series when you have empty points like this, I don’t think that’s possible. It would require
a DCR. You may need to implement something along the lines described in this article http://msdn.microsoft.com/en-us/library/aa964128(SQL.90).aspx.
When I tried the suggestions I over come the auto colouring issue and also used CDATE () but lines still extend bacawords. Can anyone suggest what to do it this situationHi AKshay_Jadhav,
Firstly, I am not sure who is that MS guy you mentioned without the detail name. Based on my understanding to your issue, I think you could utilize the function
IsNothing in reoprting services to have a check whether the value is null, if it is Null, you should give a average value to this point, if not leave it to be the original value. Of course, you could achieve this in T-SQL. To
the color and marker, we could type in the expression in both feature to control their display effort.
Hope this helps.
Thanks,
Challen Fu
Challen Fu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Column Chart with Multiple axes
Hi folks
I am using flex 2 charts for displaying data. I want to show my data using column chart with secondary axis. However columns for multiple series are coming one over another. here is the code I have attached:-
But I want to put columns side by side. Any thoughts will be appreciated.
Warm Regards
Rush-meAny thoughts?
Warm Regards
Rush-me -
Line Chart with Multiple Series
Post Author: JayZee
CA Forum: Charts and Graphs
HI
I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do!
My data is provided summarized on the server and is returned as 12 rows:
Month Year1 Year2 Year3 Year4 Year5January 100 80 75 90 120February 85 25 40 25 80etc for the rest of the months
My problem is that I can only get the chart to accept the values to display as a summary and not just as the data pulled back from the server. I have read an article on the support site for Crystal 6.0 but it doesn't seem to translate well into XI.
If necessary I could redesign the table to bring back un-summarized data but that is quite a big job.
Any help greatly appreciated.
JayPost Author: Tim Wise
CA Forum: Charts and Graphs
In the chart expert, put Month in the 'On change of' box and put each year in the 'Show values' box. This puts the month on the x-axis and plots each year as a line.
Is that what you want?
I did this in CR 2008 using your data in an Excel sheet. -
How do you combine a stacked column chart with a clustered column chart
Hello,
I am trying to combine a stacked column chart with a clustered column chart. I know that in Excel there is a way to trick that described on the next site: http://people.stfx.ca/bliengme/ExcelTips/Columns.htm
Is that possible with BI Publisher?
Thank you very much!
Codruta CrisanFinally I get it myself:
You need to use graph type as BAR_VERT_STACK2Y and the declare the series that you want to see on the first Y vertical bar as assignedToY2="false" and the ones that you wanr to see on the second Y vertical bar as assignedToY2="true".
In my case I use 4 Series, 2 stack on the first clustured column and 2 stacked on the second (2Y) clustured colum....see below
graphType="BAR_VERT_STACK2Y">
<SeriesItems>
<Series id="0" assignedToY2="false" color="#BBD6E7"/>
<Series id="1" assignedToY2="false"/>
<Series id="2" assignedToY2="true" color="#004A96"/>
<Series id="3" assignedToY2="true"/>
</SeriesItems> -
Drill Down between 2 stacked column chart with multiple rows.
Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region Q2 Q3 Q4
Other 3658 3497 497
NA - North
America 3 3 1101
APJK 1 4 597
UK 324
EMEA North 1 1 288
CORPORATE 1 5 215
LA -
Latin America1 2 208
EMEA 1 199
EMEA South 1 1 169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region Priority Q2 Q3 Q4
Other D: End of Next Day 1568 1613 239
Other C: End of Day 983 893 119
Other A: 2 Hour 631 610 70
Other B: 4 Hour 396 318 56
NA -
North AmericaD: End of Next Day 2 2 514
APJK D: End of Next Day 3 297
NA -
North AmericaC: End of Day 284
NA -
North AmericaA: 2 Hour 1 170
UK D: End of Next Day 157
APJK C: End of Day 1 1 152
Other E: 3 - 5 Business Days 68 58 13
EMEA North D: End of Next Day 1 136
CORPORATE D: End of Next Day 4 107
NA - North America B: 4 Hour 1 104
LA - Latin America D: End of Next Day 1 1 86
EMEA D: End of Next Day 86
UK C: End of Day 85
APJK A: 2 Hour 79
EMEA South D: End of Next Day 72
EMEA North A: 2 Hour 69
EMEA North C: End of Day 56
APJK B: 4 Hour 55
EMEA C: End of Day 1 53
LA - Latin America C: End of Day 54
UK A: 2 Hour 49
EMEA South C: End of Day 1 44
CORPORATE A: 2 Hour 1 43
CORPORATE C: End of Day 44
LA - Latin America A: 2 Hour 1 42
EMEA South A: 2 Hour 1 32
EMEA B: 4 Hour 30
UK B: 4 Hour 30
EMEA A: 2 Hour 27
EMEA North B: 4 Hour 1 26
NA -
North AmericaE: 3 - 5 Business Days 25
LA - Latin America B: 4 Hour 23
EMEA South B: 4 Hour 20
CORPORATE B: 4 Hour 17
APJK E: 3 - 5 Business Days 13
Other F: 6 - 10 Business Days 6 4
Other G: 11 - 20 Business Days 6 1Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept. -
Column chart with null data items
I have a Column Chart with an ArrayCollection data provider.
The data will sometimes have missing items in some "rows'. For
example, it might look like this where the second object has no
"Male" property:
public var myData:ArrayCollection = new ArrayCollection([
{School: "Priorford", All: 95, Male: 92, Female: 98},
{School: "Giffnock", All: 87, Female: 89},
{School: "Hastings", All: 80, Male: 78, Female: 82}
Sometimes I get the following error:
TypeError: Error #1009: Cannot access a property or method of
a null object
reference.
at mx.charts.chartClasses::NumericAxis/mapCache()
I'm assuming the error is because of missing data items, but
I'm not 100% sure. Some data sets with missing items will display
with no error. I can't see a pattern to those that don't.
-- I can't produce the error when using a "static" data
source set in the Flex app itself (such as the example above).
These always display correctly, even with missing items.
-- In the problem case, the source data comes from a MySQL
database through a PHP script that is called with a Flex
httpService. The returned data is parsed in Flex, and put into the
ArrayCollection. I was suspecting that the returned data was flawed
in some way, but the same ArrayCollection displays correctly in a
DataGrid. The problem is only with the Chart.
-- I can work round the problem by adding the missing
properties and setting them to an empty value. But I don't think I
should have to do this.
Has anyone seen this problem, or know of any obvious thing I
might be doing wrong.Thanks Arthur.
Your first suggestion is effectively what I'm doing as a
workaround. But it is a bit of a pain to have to account for this
each time when displaying a chart. It's a particular problem when
you don't know in advance what "categories" might be returned by
the data and that have to be charted.
My biggest concern is that this looks like a bug, and the
fact that it seems to occur intermittently is a bit worrying. (I
also know that eight out of ten reported "bugs" are user error,
which is why I was wondering if anyone else had experienced this.)
About your second suggestion, I think the interpolateValues
property only applies to lineSeries.
Maybe you are looking for
-
How do I know if my iPhone photo has been sent?
When I take a photo with my iPhone and send it, how do i know it has been sent?
-
Purchased apps not transferred
In preparation for the 5.0.1 upgrade, I selected to 'Transfer purchases from Michelle's iPad'. This seemed to execute (quickly). Nonetheless, when proceeding to upgrade, I get the following message: "There are purchased items on the iPad "Michelle's
-
Question about BusinessObjectInfo in FormDataEvent
Hello all. The goal of my addon is to generate an extra Journal Entry based on one Invoice data when this invoice is Added. For this I'm going to use the FormDataEvent event... My question is: Is there a way to get the DocEntry of the recently invoic
-
Help please!
-
this has reference to my previous question that we had some problems in forms 6.0 in our ongoing project we have form with OLE Container which is used to store the signature my problem is at runtime some times this form may work some times it exits w