SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow.  The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes.  I have read this is a bug in SSRS 2008 R2.  We installed the most recent patches and
service packs.  Nothing we've done so far has fixed it and I see that I'm not the only person with this problem.  However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/ 
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2  view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Similar Messages

  • I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

    I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

    That's probably a bookmark you have saved in Favorites.
    Tap bookmark icon>Favorites>Edit>Delete the bookmark

  • I purchased a Macbook Pro 17" with an I7 chip 2.4. Apple says you can go up to 8 GB of ram. I have read that it will support 16 GB. Does anyone know the answer to this?

    I purchased a MacBook Pro 17" with an I7 chip. Apple says that up tp 8GB of are supported. I have read that up to 16 GB are supported. Does anyone know the answer to this?

    If it's a 2011 model, the limit is 16GB. If it's a 2010 model, the limit is 8GB.
    (64363)

  • I need to reload (resend information) multiple tabs in less than a second (I am playing Travian), but how can I do this with firefox for mac?

    When I try to send multiple attacks within a second playing Travian, it is impossible because it is too slow to confirm "resend information" on each tab, and it also takes too long to move from one tab to another. I've tried changing all the possible settings I can think of, but nothing seems to work.. This works fine if you have windows or linux, so how can I make this work with my mac, or do I have to get a pc just for that :( Thank you ever so much for helping me.. I've spent countless hours on this and I am just about to give up playing Travian because of this one stupid little thing :(

    It is working for me if I open a second Firefox instance with its own profile by starting Firefox with the -no-remote command line switch.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager
    Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously.
    * http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

  • SSRS report is consuming much more time to fetch data from DB even direct run SP takes less than a second

    Hi,
    we are using SQL SERVER 2008R2 X64 RTM version. 
    One of the SSRS report designed by developer  is  consuming  much more time( 5 to 6 minutes ) to fetch data from DB. Even direct run of  Stored Procedure (Called in report )takes less than a second to display the result set.
    Please help.
    Regards Naveen MSSQL DBA

    Hi Naveen,
    Based on my understanding, you spend a little time retrieving data with a stored procedure from database in dataset designer. However, it takes long time to run the report to display the data, right?
    In Reporting Services, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. In your scenario, since you mentioned retrieving data costs a little time, you should check the table
    Executionlog3 in the ReportServer database to find which section costs most of time, TimeProcessing or TimeRendering. Then you can refer to this article to optimize your report:
    Troubleshooting Reports: Report Performance.
    Besides, if parameters exist in the report, you should declare variables inside of the stored procedure and assign the incoming parameters to the variables. For more information, please refer to the similar thread:
    Fast query runs slow in SSRS.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • I have a MAC OS X version 10.9.2  I've installed the latest version of Adobe Reader but cannot ope

    I have a MAC OS X version 10.9.2  I've installed the latest version of Adobe Reader but cannot open any documents.

    im trying to open a pdf file on a web site and i can only manage to open the file i only get the following message.
    Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.

  • MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.

    MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.  I thought it drained because of looking at photos, so I quit looking at them and it made no difference.  Am I doing something incorrectly to cause this short battery life?

    You are still under warranty if your iPod is "new."  Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP.  Whichever is more convenient for you.

  • I am trying to download a document which requires me to have Adobe Reader, which I do; however, it keeps asking me to install the Reader program.  When I try to do that, I keep getting a message that I have a more functional product installed.  Regardless

    I am trying to download a document which requires me to have Adobe Reader, which I do; however, it keeps asking me to install the Reader program.  When I try to do that, I keep getting a message that I have a more functional product installed.  Regardless, I cannot open the document that i need and it is urgent that i complete it and send it in.  Please help.

    Use this link Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
    When you have downloaded it, then clean out the old adobe reader and then try to install the latest one, i had to do this about a week ago and it solved the problem.
    Regards

  • When I try to access Apps via a CM1415fnw I receive an error reading: This printer is unable to con

    When I try to access Apps via a CM1415fnw I receive an error reading:  "This printer is unable to connect to the service.  Check Internet connection..."  However, ePrint and Web Services show the printer as Connected and I can eMail messages and documents to the printer and they print.  Web Services IS enabled.  Firmware is up to 20110329.  Little help?

    I called HP Support Dec 9th and was told that the Apps servers are being upgraded and should be back online "soon".  Apparently, at that time, they had been down/worked on for two days.  That's now at least three days.  Does anyone know when the service will be available again?  I purchased this new printer and installed it this week, but haven't seen the Apps feature work yet because it won't connect to the service.  Hence, I'm unsure at this point whether the problem is (still) on HP's end or possibly a misconfiguration or something on my end.  Thanks.

  • I have a Canon RebelXS digital camera.  Do I need to install the specific Canon Software to my IMAC to upload my photos or will IMAC software support this upload?

    I have a Canon RebelXS digital camera.  Do I need to install the specific Canon Software to my IMAC to upload my photos or will IMAC software support this upload?

    I think you'll find that iPhoto will recognize your Rebel and load it's pictures (does for my RebelXT).  If you don't want to use iPhoto, then yes, you'll need to download the software that came on a disk with the camera, and possibly update it (from the Canon site) based on the operating system you're running.

  • I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

    I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

    How about extensions? Perhaps you have an adblock extension installed.
    Check Safari > Preferences > Extensions

  • I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done

    I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done?

    Have you tried repairing disk permissions : iTunes download error -45054

  • When I go to Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

    After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a general summary of what you need to do, if you choose to proceed:
    ☞ Copy a particular line of text to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
    If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I have noticed an issue with utilizing the "stream" function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clea

    I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.

    Here are the screenshots for what it's worth.
    Not sure why I can't post them in the original post.<br>
    <sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
    '''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
    IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
    I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
    '''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

  • I just downloaded the trial of Photoshop.  Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened.

    I just downloaded the trial of Photoshop.  Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened.  Does anyone know how I can fix this?  I tried rebooting my computer and reinstalling photoshop.  Thank you!

    i7 is quite fast. that's what i am on too. You may need to
    It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool". (see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 )
    The order varies depending on your individual needs:
    1. Maybe you have to activate/deactivate, so please have a look there:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
    3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
    I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
    Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html   and follow the prescribed sequence of operations
    4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html or
    Det finns också ett svenskt språkiga chatt. http://helpx.adobe.com/se/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.

Maybe you are looking for

  • Blackberry 8310 not showing reply or send in sms text options menu

    I have a blackberry 8310. iam able to recieve sms text messages but when i click to on options, there is no "reply" option in the menu for me to be able to reply to the text. The chip works fine in other phones so that tells me something in the phone

  • How to transfer pics from IPhone

    How do you transfer pics from IPhone 4 to Cp

  • Able to access internet but not able to see Time Capsule

    Hi-not sure what is going on but my son's G4 (with Tiger) lost it's ability to see and use the TC we have set up. It was working and then sometime yesterday it quit being visible to him. In fact, he no longer can connect to the network via the TC but

  • Can One Sync a Smart Mailbox to .Mac???

    I use a smart mailbox for all emails that need attending (if message is flagged.& if in Inbox) now, I would like to have that "smart" folder sync to my .mac account somehow, as it is IMAP there must be a way... any ideas? I realise anything in my .ma

  • XML output - all tags in Single line?

    Hi, Scenario: HTTP----> XI --- > File(XML)/Proxy(abap). Output XML file has the data in single line(all XML tags). Now, issue with abap proxy which reads this XML file for sending attachment in email has length constraint(can not read if line length