SSRS Expression- Adding Totals per page

Hello Everyone,
I need an expression to add a total per page in SSRS in the footer of the report. See screenshot.
So when users run SSRS, the first page must show a total for order qty , ship qty and subtotal for the first page only.
When users go to the second page, the it must show the total for order qty, ship qty and subtotal for the second page only as in the screenshot below.
The data region that is being used is a table region, and on the footer textboxes are being used to add totals for order qty, ship qty and subtotal.
Let me know if there is any expression that can do that and how I would add it to the footer. I thank you all in advance for helping !!

Hi robertdba,
According to your description, you want to add a total in the page footer to sum each column’s value on each page.
In your scenario, you can add a textbox in the page footer and specify the value expression with ReportItems collection. Please refer to our test results:
1. Design the report like below:
2. Preview the report.
Reference:
ReportItems Collection References (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Similar Messages

Sales AR Item Type Invoice Print Layout Design "Sub Total" per Page

Dear Forum Team
We need some advice on how to modify, fomulate(?) [Sub Total] for each page's 'amount' on the Sales AR Item Type Invoice.
Currently the 'sub total amount' on each page is showing Grand Total instead of sub total.
Thanks

Hi,
In you PLD, In repetitive area, you might have linked the fields like Item name, Item Description, and so on. In these fields one of the field will be Total for line items. Am i right?
If it is so, then in repetitive area footer, Create one Formula field and give formula PageSum("Field_025") (in your case)
Ie., Field_201 = PageSum("Field_025")
Field_025 - contains the Line Total of Row items.
I hope this could help you.
Raja.S

HOw to fix No of Rows per page in SSRS

HI,
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
Thanks in Advance.

I need to do 100 rows per page. I tried the technique above but I am still just getting about 16 rows per page. (I believe I followed the instructions correctly.)
I know...100 rows is a ton but the users want it (and, thus, my boss wants it). They only display the report; they do not print it.
Here is what I did...
1. Right click on the table
2. Select Properties
3. Select the Groups tab
4. Select Add...
5. Enter a group Name: "Group_for_PageBreak" (I have no other groups)
6. Enter an expression: =Ceiling(RowNumber(Nothing)/100)
7. Uncheck "Include group header" and "Include group footer"
8. Check "Page break at start"
9. Select "OK"
Re #6, I also read to try this so I did: =CInt(Ceiling(RowNumber(Nothing)/100))
Re #8, I also tried "Page break at end"
Is "Details grouping..." relevant?
Thanks.

Record count per page , total record count per report in BI Publisher

hi,
In Oracle BI Publisher tool , can you please tell me how to display total record count of a report ? as well as how to display record count per page ?
Thanks for your help
Regards
Gayathri

check inbox. forwarded the updated template

How to make a table to display perticular number of rows per page??

Hi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.

Hi Tony ,
Just wanted to know will this solution work ;
I am having a report and its using a grouping expression on “Group on
(=Field!Salelocation)” when it add another group on the details and have the page calculation such as (=Ceiling(RowNumber(Nothing)/20))
and assign the page break at to the point of saving its ok , when trying to upload the report then it throws the following error .
I have tried your solution trying to give the page calculation the upper group but still the following error comes back
“A group expression for the grouping ‘table2_Group1’ uses the RowNumber function with a scope parameter that is not valid. When used in a group expression, the
value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
A group expression for the grouping ‘table2_Group2’ uses the RowNumber function with a scope parameter that is not valid. When
used in a group expression, the value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
Will you able to assist me on this.

Retrieving 10 records per page

hi,
i would like to have the source code for retrieving 10 records per page in jsp. I have a huge resultset and i would like to display 10 records per page.
your help is highly appreciated.
regards
andrew

hi,
i would like to have the source code for retrieving 10
records per page in jsp. I have a huge resultset and
i would like to display 10 records per page.
your help is highly appreciated.
regards
andrewHey Andrew, this code will help you out. Essentially the pseudocode to do what you want is below. Let's say your jsp is called dbresults.jsp
Get total number of results from query result set
If page is called with no index number of current record to display
Display the records from 0 until a max of ten counting how many we display and keeping track of the current record number.
end if
else
Display the records up to a max of ten from the index number we received in the query
end else
tempvar_a is the current number of records displayed minus 10 records and minus the amount of records displayed on this page.
If tempvar > 0
Display a previous button with the a href as dbresults.jsp?index=tempvar value
end if
else if current record index < total record count
then there are more records to display so make a next button with an href of dbresults.jsp?index=value of current record number plus one
end else
One caveat is that getting the index number in the beginning of the JSP as:
request.getParameter("VIEWEDROWS");
will return a string that we have to convert to an int since you will be adding and comparing to this number so do:
String TEMPVIEWEDROWS = request.getParameter("VIEWEDROWS");
int VIEWEDROWS = 0;
if (TEMPVIEWEDROWS != null) {
VIEWEDROWS = Integer.parseInt(TEMPVIEWEDROWS);

Restricting chart records according to Report no. of Records per page

Hi
I am calling a column chart from Report using custom Query and I am mapping the Chart Column property in Report respectively to the chart.
The Repeating frame with respect to the Reports Records 'Max. records property' is set to 2. Hence the chart and the Report records are on the 3 pages as the Total records are 6.
But the chart is plotting all the 6 records even though the Report populates only 2 records per page. I require it to plot only respective records of the Report for that page in the chart not all the 6 records.
Pl. let me know how to Proceed
Thanks
Prakash H L

Pagination settings have always been cached for the duration of the session. After changing the rows per page value in the report attributes, either log out, restart the brower, and log in again, or manually re-request the page from the browser address bar, adding 'RP' in the ClearCache position in the URL.

SSRS Expression to calculate percentage with the denominator being the first value in the same column group in a matrix report

Hello, Expert,
Could you please help me with the following problem? Thanks in advance!
I have designed the matrix report (SSRS 2012) with database table structure looks like below.
Week
Version
     Count
Week1
V1.1
4000
Week1
V1.2
4000
Week1
V1.3
4000
Week2
V1.1
3000
Week2
V1.2
3000
Week2
V1.3
3000
Week3
V1.1
2000
Week3
V1.2
2000
Week3
V1.3
2000
Week4
V1.1
1000
Week4
V1.2
1000
Week4
V1.3
1000
The matrix report displays like below. Column grows based on no of Week in the table.
Week1
Week2
Week3
Week4
V1.1
4000
3000
2000
1000
V1.2
4000
3000
2000
1000
V1.3
4000
3000
2000
1000
What I want to do now is: instead of the Count values, I need to calculate the percentage of each week over the
Count in Week1 so that each cell displays Count(Week2)/Count(Week1), Count(Week3)/Count(Week1), etc. What is the SSRS expression for that? I’m new to SSRS, Please help!

Heidi,
Thank you so much for your reply and solution! Now I know how to get the first field in a group. But I can't apply your solution directly just yet because in order to explain my problem I simplified my data structure. My real data structure has a nested
group like this:
Week VersionMajor VersionMinor Count
Week1 V1           V1.1         2000
Week2 V1           V1.1         1500
Week3 V1           V1.1         800
Week1 V1           V1.2         1000
Week2 V1           V1.2         500
Week3 V1           V1.2         200
Week1 V1           V1.1         2000
Week2 V1           V1.1         1500
Week3 V1           V1.1         800
Week1 V1           V1.2         1000
Week2 V1           V1.2         500
Week3 V1           V1.2         200
Here is the query for the above data:
SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 2000 AS Count
UNION ALL
SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 1500 AS Count
UNION ALL
SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 800 AS Count
UNION ALL
SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 1000 AS Count
UNION ALL
SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 500 AS Count
UNION ALL
SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 200 AS Count
UNION ALL
SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 2000 AS Count
UNION ALL
SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 1500 AS Count
UNION ALL
SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 800 AS Count
UNION ALL
SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 1000 AS Count
UNION ALL
SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 500 AS Count
UNION ALL
SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 200 AS Count
And my matrix table looks like this:
What I need to do is to calculate the percentage of each week over week1 for
1) V1 Total
2) V1.1
3) V1.2
I can't use your solution directly because I need to apply Sum function for each cell and the Sum function gives me error when I try to use it on the denominator
First(Fields!Count.Value,"VersionMinor"). If you could help me further to get to the final solution, I'd really appreciate it!!
Happy New Year!

SSRS - % percentage ROW TOTALS don't calculate correctly in a Table Matrix

SSRS - Report Builder 3.0
I have created a report with a MATRIX table with a TOTAL ROW and a TOTAL COLUMN and the total column is calculating correctly but the ROW totals is not calculating correctly
The screen shot below is of the Matrix table in the Report Builder 3.0 "Designer view"
When I run the report the column totals the percentage is averaged correctly, but the ROW TOTALS do not, some are close but i need them to be accurate.
If you take the same data into excel the total percentage calculates correctly - if you compare the excel with the SSRS some rows do calculate close, but not accurate. the total column calculates correctly
FY13-Q4
FY14-Q1
FY14-Q2
FY14-Q3
Total
100%
89%
65%
68%
80%
50%
72%
43%
45%
52%
100%
91%
63%
69%
81%
10%
17%
29%
31%
22%
100%
96%
67%
76%
85%
70%
70%
53%
64%
64%
90%
93%
90%
82%
89%
74%
75%
59%
62%
68%
I Need the totals rows and columns to average the percentage correctly in the SSRS report.
Please help...
-Isaack

Hi Katherine Xiong,
The formula (SSRS Expression) i am using is the following
=Sum(IIf(Fields!AnswerText.Value = "Yes", 1, 0)) / (Sum(IIf(Fields!AnswerText.Value = "No", 1, 0)) + Sum(IIf(Fields!AnswerText.Value = "Yes", 1, 0)) + Sum(IIf(Fields!AnswerText.Value
= "n/a", 0, 0)))
Basically if field value = "YES" it counts, if the answer = "No" if the value is = "n/a" it should not count in the total score percentage
I get the correct PERCENTAGE on the 1st aggregate, but when the table has multiple aggregates the percentage is never accurate.
The Table below is using the above formula, the 1st aggregate is correct but if you get the average percentage from the 1st column it should be 86.2% is the accurate number, sometimes close but i want to report accurate numbers and not doubt SSRS reports
compared to excel reports.
TOTAL ROW (highlighted on the screenshot in Yellow) is incorrect aggregate averages %, the correct average are the following
[86.2%] [71.5%] [75.5%] [87.87%] [90.2%] [69.9%] [92.8%]
-Isaack

Is it possible to datamerge more than one image per page?

I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Add image fields in the data source file
By adding image fields to the data source file, you can allow a different image to appear on each merged record. For example, when you merge documents that include information from various companies, you may want to include an image of each company’s logo as part of the merge.
Open the data source file.
At the beginning of the data field name, type an “at” symbol (@) to insert text or paths that refer to image files.The @ symbol is required only in the first line; subsequent lines should include the image paths. Paths, which are case-sensitive, must follow the naming conventions of the operating system in which they’re stored.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.
(Windows) Example of image references in data source file
Bill Tucker
36
C:\Photos\BillTucker.jpg
Dat Nguyen
53
C:\MyDocuments\dat.gif
Maria Ruiz
26
C:\Photos\Ruiz.psd
(Mac OS) Example of image references in data source file
Bill Tucker
36
Mac HD:Photos:BillTucker.jpg
Dat Nguyen
53
Desktop:Family:dat.gif
Maria Ruiz
26
Mac HD:Photos:Ruiz.psd
You can use InDesign to view the path of an image on your operating system. Insert an image in an InDesign document, and then use the Links panel to view the image’s location. With the image selected, choose Copy Info > Copy Full Path from the Links panel menu. You may need to edit the path after you paste it in your data source. This technique is especially useful for images on a server.

anna-rees wrote:
I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Yes, pretty much exactly as you describe. You would then just add those fields to the boxes in your page. I tend to add an apostrophe before the @ symbol in Excel so it doesn't think it's a function - as per text you quoted above.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.

HP OfficeJet Pro 8600 - The Really High Cost Per Page

On February 6, 2014 I bought an HP OfficeJet Pro 8600 all-in-one, including the OPTIONAL tray 2.
I use it in my home office with five computers. One is a new Apple MacBook Pro OS 10.9.5, another is a three year old HP Laptop on Windows 7, and another is a five year old Dell Desktop still on Windows XP.
I bought the printer to . . . print. I thought I might be a nice convenience to write business correspondence and print an envelope, without the need to change paper, or otherwise touch the printer until I was ready.
The printer is advertised, even in the user manual and box, to be capable of 1200 dpi printing, even though it uses the below average PCL Print Driver and not Post Script.
The printer works fine, but the HP driver and utility software must be written for a different printer. If I put HP Inkjet 20# paper in tray 2, and #10 envelopes in a locked tray 1, I can print at the "best print setting" which still isn't great. But it works.
If I put HP Premium Presentation Paper 32# paper in tray 2 ($8.00 per 100 sheets), and the same quality #10 envelope in tray 1, the printer software loses it's mind. It performs the same on all five computers.
When I try to print a business letter and envelope the print driver and HP utility grays out tray 2, and it grays out the "best" print setting. In short the only choice is NOT to use HP brand papers, or remove tray 2, print the business letters, and then remove the 8.5X11 HP Premium Paper, install envelopes, and print again. Not what I had in mind.
I've been in touch with HP as the printer is still under warranty. They offered a replacement, that will have the same printer an utility problems, or to buy it back at $175.
I bought the original printer for $249, tray 2 for $125, and 5 XL print cartridges for $149. That is a total of $588. If I sell it back to HP check out the cost per page. At $588 - $175 = $413/2742 total pages = 15 cents a page! Owch!!!
There is nothing wrong with the printer as such. The problem is the HP Utility and Driver. When did HP stop using a traditional warranty, and give pennies on the dollar, when they clearly have a software problem, they refuse to fix?

Hi there @Oceankey , welcome to the forums
I understand your Officejet 8600 is no longer copying an entire page from the scanner bed.
I am unsure of which troubleshooting steps you have tried for this problem however, I would suggest updating the firmware (if needed), power resetting the printer and to ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Getting the Latest Firmware and Product Updates
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a wonderful day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I add pages to a photo book with the same number of photos per page.

I want to add a photo book, select all the pages and tell the book to be 4 photos per page. And when I add new pages, I want those to have 4 photos.
When ever I add, it just selects a random page and then I have to manually change that page to have 4 photos. Is there an easier way to do this?

Nope
the added pages are what they are and you have to change them if hey are not what you want
Click on the layout button and and select the 4 photo per page layout you want
LN

Limit the number of records per page in webi

Hello All,
How do i limit the number of records per page in webi?
i was asked to have not more than 20 records per page.
In " NUmber of Vertical records per page"(Quick display mode) the default value was 100, i am trying to set it to 20 ...but its not updating....its still taking 100.
I am on BO XI 3.1 Sp2 fix pack 3
Please let me know a way to accomplish this.Any inputs appreciated
Thanks

It can be done as follows:
1. create a variable at report level as:
v Test = Floor(RowIndex()/20)
2. Added this variable in the Block as a new column.
3. Select the v Test column, Right Click and set as section (also you can apply break).
4. Go to structure mode select section\break and go to properties tab and select the property "Start on new page".
Regards,
Rohit

Matrix with subtotal per page

hi,
How do i get the page total of a matrix? please help.

Can you give me a little more details? Subtotals on a per page basis of the data in the report?

Printing multiple photos per page ?

in Canon easi print you can select many photos and/ or many copies of the photo and select how many per page. for example : 2 x photo A, 3 x B, C, D & E ; 8 photos total on 2 x A4 sheets. or you could select 8 on 1 page, or 2 on 4 pages...
Does Mac have same functionality...I can't find it in i photo....
canon easi print does not have i mac version.....sadly
is there any other software available which has similar ease of use ?

You can print multiple photos of te same size on a page easily
select the photos and print, select the printer, paper size and print size (do to math to be sure they fit) and if the previews does not show multiple photos then click customize and colcik on settings - select multiple photos per page and teh preview will reflect youur choice - click print and make any printer specific selections and pting
LN

SSRS Expression- Adding Totals per page

Similar Messages

Maybe you are looking for