SSRS - Installation and configuration

Hi ,
Am new to SQL Server and I need to setup SQL Server Repoting services on SQL server cluster where instance is already running.
Version : SQL Server 2008 SP1
I did some research online and found some links and videos on how to do it.  My understanding is that I need to Install Reporting services and configure it. This is needed for Sharepoint. Here are the links which am planning to use.
http://technet.microsoft.com/en-us/library/ms143736(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/cc281311(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/bb326356(v=sql.105).aspx
http://msdn.microsoft.com/en-us/library/ms144292(v=sql.105).aspx
I got some doubts when going through the above links.
1)  Which mode should I choose while installing it Native or Sharepoint integrated mode, am thinkning as we have sharepoint enviornment, I need to choose Sharepoint Integrated mode, please confirm.
2)  Is downtime needed to do this. I mean I can install it when the instance is up and running right ?
3) As it's a clustered environment, I'm thinking I need to install SSRS on one server but what changes should I make on the second server to recognize this?
4) Can you please share me any more better links to do this on clustered enviornment, which has step-by-step procedure.
Thanks in advance

Hello,
1. It based on your requirement, if you want to use the features of SharePoint, you can configure the Reporting Services in SharePoint Integrated mode. Report server modes are mutually exclusive, you can switch a report server from one mode to the other.
2.No. SQL Server Reporting Services is independent SQL Server component which you can installed side by side with SQL Server instance.
3.Report Server service cannot participate in a failover cluster, you can install Reporting Services on a computer that has a SQL Server failover cluster installed and host the report server database on a SQL Server failover cluster. The report server runs
independently of the failover cluster.
Reference:Host a Report Server Database in a SQL Server Failover Cluster
4. The following threads are about similar requirement,please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/b9db5c98-1b36-47a4-927d-c03e536f7cb7/reporting-services-on-failover-cluster-nodes
http://www.sqlservercentral.com/Forums/Topic849220-146-1.aspx
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Similar Messages

  • EIS Installation and Configuration

    Hi Everybody,
    I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
    But I have no idea how to configure(Creating DSN Catalog) in EIS.
    I am using Oracle 10g. Can any one please help me on thsi installation.
    Already I gone through the installation document but I didn't understand how to configure.
    If anyone having installation and Configuring Screen shots please send me to my mail
    Mail Id: [email protected]
    This is very urgent I need to give presentation on the EIS
    Thanks in Advance for your help
    Awaiting for your quick Response

    I'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.

  • What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

    I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
    So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
    Clients and suggests it should be used for Jabber for Mac.
    What is BDI or BDS spelled out? Something directory integration, but what is the B ?
    Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
    How can Jabber get any more confusing…
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

    Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
    To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
    Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error

    Hello,
    I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
    In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
    Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
    In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
    The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
    lf
    WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
    INFO: Creating new CFM connection
    INFO: Creating a new logger for oracle.sysman.top.agent
    INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
    INFO: Creating a new logger for OuiConfigVariables
    INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
    INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
    INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
    INFO: Successfully returning from CfmFactory.connect()
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 2 aggregate instances saved
    INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
    INFO: Framework waiting for Action to complete at 15:08:10.272
    INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
    WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
    WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
    INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
    INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
    INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
    INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
    INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
    1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
    2.AGENT_PORT=3872
    3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
    4.b_doDiscovery=false
    5.AGENT_BASE_DIR=/users/ncgf/em_agent
    6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
    7.s_hostname=nsn175-89.us.oracle.com
    8.OMS_HOST=nsn175-105.us.oracle.com
    9.b_startAgent=false
    10.b_secureAgent=true
    11.b_chainedInstall=false
    12.b_forceConfigure=false
    13.EM_UPLOAD_PORT=4904
    14.b_forceAgentDefaultPort=false
    15.s_staticPorts=
    16.PROPERTIES_FILE=
    b_skipValidation=false
    INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
    INFO: oracle.sysman.top.agent:Validating with http protocol ...
    INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
    SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
    INFO: oracle.sysman.top.agent:Validating with https protocol ...
    INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
    SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
    INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
    INFO: oracle.sysman.top.agent:Performing free port detection..
    INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
    INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
    INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
    INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
    INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
    1. state_dir=/users/ncgf/em_agent/agent_inst
    2. agentBaseDir=/users/ncgf/em_agent
    3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
    INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
    INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
    INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
    INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
    INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
    INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
    INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
    INFO: oracle.sysman.top.agent:Creating shared install...
    INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
    INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Secure Mode: No
    INFO: oracle.sysman.top.agent:DeployMode : agent
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:Creating directories...
    INFO: oracle.sysman.top.agent:Creating private.properties...
    INFO: oracle.sysman.top.agent:Creating blackouts.xml...
    INFO: oracle.sysman.top.agent:Creating targets.xml...
    INFO: oracle.sysman.top.agent:Creating emctl control program...
    INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
    INFO: oracle.sysman.top.agent:Agent will not be secured.
    INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
    INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is  missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
    INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
    INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
    SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
    1. Agent Registration Password was not passed.
    2. b_secureAgent was passed as false
    3. The flag -forceConfigure was assed from agentDeploy.sh
    INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
    INFO: oracle.sysman.top.agent:Plugin Homes found.
    INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
    INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
    INFO: oracle.sysman.top.agent:Plugin command completed with status=0
    INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:---------------------------------------------------------------
    INFO: oracle.sysman.top.agent:---------------------------------------------------------------
    SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
    SEVERE: oracle.sysman.top.agent:Agent configuration has failed
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
    INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 2 aggregate instances saved
    INFO: done waiting for Action from 15:08:10.272
    Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
    "Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
    Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output.  Also if you can open an SR with oracle support to track this issue and its resolution. "
    [ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
    Oracle Enterprise Manager 12c 3.
    Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
    The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
    Do you want to continue using this directory? [yes/no] yes
    Enter password
    Emcli setup successful
    [ncgf@nsn175-105 bin]$ ./emcli verify_updates
    Verifying updates. Starting validation...
    Type       : Plug-in
    Description: Demo Hostsample Test Plugin
    Attributes
            Version: 1201000100
            Revision: 0
            OS Platform: Generic Platform
            Plug-in Name: Demo Host Sample Plugin
    Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
    For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.

       Hello AkankshaSheoranKaler
    We have done the following, but we aren't able to resolve this issue. Thank you for your help!
    lf
    “This  happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
    On Enterprise Manager server [nsn175-105], we did the following:
    1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
    we start nfs service by executing command “service nfs start”.  
    On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
    On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
    After making this change, we ran agent deployment again. We encountered the same error as shown above.
    “You can fix the software library or you can download the agent bits in offline mode.”
    For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
    “Try downloading the bits again”
    We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
    (Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

  • SEEBURGER EDI &AS/2 adapter installation and configuration guides

    hi ,
    can any one provide me SEEBURGER EDI &AS/2 adapter installation and configuration guides or links please?
    thank you,
    babu

    Hi,
    You can get the original manuals from Seeburger if you are installing the Seeburger on server.
    Please see the below links
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://www.seeburger.com
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Regards
    Chilla

  • Oracle 11g Server Installation and Configuration

    Hi All..
    I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
    This is for a server and we might even need to replicate the entire DB.
    Can any on please help me out in this .
    Thank you

    Hi,
    Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
    Regards,
    Hussein

  • Exch 2013 Installation and configuration from a SBS point of view?

    I was just wondering if anyone has stumbled upon any good "how-to" sites for those of us that (up to now) have been used to using SBS servers but now find ourselves needing to go the manual route with separate new servers (domain controller and
    Exchange 2013 server)?
    I'm trudging along with my first Server 2012 R2 and Exchange 2013 SP1 installation and configuration, but since I'm used to things configuring themselves in SBS, the piecemeal approach to 2013 is presenting challenges for me.  
    Considering the market for SBS is small business (and for me, typical 20 users), I'm looking for some direction and help in configuring these new servers to act like SBS 2011 replacement servers, with similar capabilites, etc...from the viewpoint of an SBS
    administrator, per se.
    Maybe nothing exists and we have to start from scratch, but I was hoping with as big as the SBS market was, there would be some useful info out there with the realization that we're coming from SBS.
    Thanks.

    Hello,
    It seems you have installed the Exchange Server and preparing to move mailboxes to the new host. You can check the application log to check whether the new installed Exchange works
    fine.
    If there are any error ID/reports, you can post them here for our referernce.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Hyperion 11.1.1.3 Installation and Configuration on a Distributed Environ:

    Hi All,
    We have Only Hyperion Production Servers on a Distributed Environment. Now, we are thinking to create new instance that will be called Development Environment and that must be replica or mirror of Prod Environment. For that we cloned Production Servers.
    Since we have all four servers Cloned for Development Environment now I need to Configure those all four instances.....I never worked with installations and configurations ...I do have knowledge and little experience with single tier or one system installation and configuration but distributed environment....I need your support and guideline to configure these boxes...
    Our Distributed Environment lay out is as follows:-
    We have installed Hyperion on Windows Server 2003 and Database is SQL Server
    (1) We have Four Servers
    (a) SQL, which Contains these services EPMA, and IIS Admin Service, World Wide Publishing Services, Hyperion Calc Manager-Web Application,
    Hyperion EPMA (.Net JNI Bridge, Engine Manager, Event Manager, Job Manager, Process Manager, Web Application, and Data Syn-WebApplication)
    (b) Essbase Server Contains these services Hyp ERP Integrator-Web Application, Hyp Essbase Services, Hyp financial Data Quality Management-
    Task Manager
    (c) Planning Server contains these Services Hyp Financial Reporting-Web Application, Hyperion Planning-Web Application, Hyp RMI Registry,
    Hyp Web Analysis-Web Application
    (d) Workspace Server Contains these services Hyp Finacial Reporting (Java RMI Registy, Print Server, Report Server, Scheduler Server), Hyp Foundatio
    OpenLDAP, Hyp foundation shared services-web application, Hyp Provider Services - web application, Hyp Workspace (agent service and web application)
    (2) Now my question is which server needs to be configured 1st then next and next and what things or steps i need to follow for configuration that works fine?
    I know I can run EPMA configure tool for each system from Stat>All program>Oracle EPMA>EPMA Configuration> and then select tool to run.....But I am bit confused that which one go 1st and then next.
    Please give your few words for this so that I can start configure the system....
    I hoping for positive feedback...
    Thanks in Advance.
    Safi
    Edited by: Safi on Aug 31, 2011 2:00 PM

    We have roughly 8 servers in our distributed prod environment. We are using red linux for everything but the epma and report server which you need a windows server. The way we installed was to start with the base server with Shared services and establish that one and whatever else you want on that server. From there it really didnt matter as you go through the installs it will ask you where your shared services box is located. The only problem we had was that some of our boxes are behind a WHI cage where we had to open up ports. Other then that i really didnt follow a specific sequence of installation after shared services. Hope that helps.

  • EAS Startup issue after OEPM 11 Installation and Configuration

    Hi All,
    EAS server is not starting up after the successfull installation and configuration of OEPM 11.1.1.2
    Provider Services and Shared Services started fine and i was able to login to Shared Services console
    During eas startup individually from the startup script i see this catalina.out file with some errors..
    By this i understand that there is some problem in selecting the required JRE as i see both JRE and JRE-64 under the
    common folder. Anybody has come across this issue while startup of EAS 11.1.1.2
    Any help would be accepted...
    execve(): No such file or directory
    Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
    Check if file exists and permissions are set correctly.
    Failed to start a 64-bit JVM process from a 32-bit JVM.
    Verify all necessary J2SE components have been installed.
    (Solaris SPARC 64-bit components must be installed after 32-bit components.)
    execve(): No such file or directory
    Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
    Check if file exists and permissions are set correctly.
    Failed to start a 64-bit JVM process from a 32-bit JVM.
    Verify all necessary J2SE components have been installed.
    (Solaris SPARC 64-bit components must be installed after 32-bit components.)
    execve(): No such file or directory
    Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
    Check if file exists and permissions are set correctly.
    Failed to start a 64-bit JVM process from a 32-bit JVM.
    Verify all necessary J2SE components have been installed.
    (Solaris SPARC 64-bit components must be installed after 32-bit components.)
    execve(): No such file or directory
    Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
    Check if file exists and permissions are set correctly.
    Failed to start a 64-bit JVM process from a 32-bit JVM.
    Verify all necessary J2SE components have been installed.
    (Solaris SPARC 64-bit components must be installed after 32-bit components.)
    Thanks,

    Hi,
    1. I assume your system is 64 bit.
    2. I think you are installing the 64 bit application. In that case you would get both the folders i.e JRE and JRE-64.
    3. Seconldy, I would like to set the permissions of the folders to everyone and give full control and test again. ( to do this, right cick ->security ->add 'everyone' -> give him full control and test).
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • InDesign Server Installation and Configuration Guide

    Hi everybody
    I try to ask one silly Q.
    Where can I get this document.
    I found many references but no link :(

    There is no document titled "InDesign Server Installation and Configuration Guide". This was an error in the CS2 version of Introduction to InDesign Server.
    You'll find the CS2 version of Introduction to InDesign Server in the InDesign Server CS2 ESD (the server download bundle). Even better you'll find the CS3 version in the InDesign CS3 Server SDK. Available at the following URL:
    http://www.adobe.com/devnet/indesign/
    The information about Java/CORBA is specific to CS3, but the information about scripting and SOAP applies to CS2.
    Let me know if that helps, or you still need something else.
    Regards,
    Heath Lynn
    Developer Technologies
    Adobe Systems

  • DAC and Informatica 8.6.1 installation and configuration on Linux (64 bit)

    Hi Hussien,
    I saw some very good post by you regarding installing, setting up and configuration R12 , OBIEE, DAC 10.13.4 , Informatica 8.6.1 on Windows. I am looking installation and configuration of Informatica and DAC installation on Linux 64 bit platfrom. I have already running R12 and OBIEE instances on Linux 64 but now need to configure the Informatica and DAC.
    I find some starting steps and documentation from the web but your expert advises and reference Notes are awesome so looking for that.
    Regards
    -Samar-

    Samar,
    I do not have specific document for DAC installation, but I would suggest the following links/docs:
    Oracle Business Intelligence Data Warehouse Administration Console Introduction
    http://download.oracle.com/docs/cd/E12513_01/doc/index.htm
    System Requirements and Supported Platforms Guide for Oracle Business Intelligence Applications 7.9.6.1
    http://download.oracle.com/docs/cd/E14847_01/bia.796/e14221.pdf
    Note: 1082987.1 - ALERT: Required and Recommended Patch Levels For OBIEE 10.1.3.x Versions
    Note: 981452.1 - INFORMATICA 8.6.1 CONFIGURATION ISSUE FOR ORACLE BI APPLICATION 7.9.6.1
    Thanks,
    Hussein

  • NWDI installation and configuration.

    Hi Expert's
    We are in the process of implementing NWDI,  I am new to this field . i need some help regarding
    1.Configured the DTR, CMS and CBS of the NWDI system
    2. What are the steps required for the installation DTR, CMS and CBS .
    3. How to install NWDI
    Thanks in advance.
    Waiting for reply
    Raj

    hi
    check this
    what is nwdi
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8a74199b-0701-0010-07a1-ebb5adafe2b1
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0b2b146-5776-2910-4a8f-9b3190eab060
    how to install
    /people/bhavana.gupta/blog/2007/01/23/installation-and-configuration-of-netweaver-development-infrastructure-was-64
    http://help.sap.com/saphelp_nw2004s/helpdata/en/98/b5b14035a5c64ee10000000a1550b0/frameset.htm
    post installation steps
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
    let me know u need more
    bvr
    Edited by: bvr on Feb 11, 2009 6:01 AM

  • Want a XI installation and configuration guide

    Hi,
    Can anybody send me the XI installation and configuration guide which has all the installation steps and post configuration steps explained in detail.
    Please send it to me on [email protected]
    Thanks n Regards
    Chirag Gohil

    Check these links,
    Installation Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
    Configuration Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    Regards
    Bhavesh

  • Starting slow... Basic installation and configuration

    Let me preface by saying that I took the AM class last year about this time... Between the class materials and the online documentation, though, I'm finding that there isn't a single clear and concise "getting started" document out there. There are a lot of good things available but I'm looking for one doc that walks through the installation & configuration process from top to bottom. The best I've come across is http://www.javapassion.com/handsonlabs/IdentityWebServices/ but that appears to have been written for an older version than what is currently available.
    So, I appeal to the community wisdom. Does anybody have or know of a cookbook or howto document that would walk take someone who has never seen Access Manager and walk them through the basic installation and configuration process for a Windows platform? I realize there is a lot more to be done after these steps but that'll come later.
    Thanks,
    James

    This is for Access Manager 7.0
    http://docs.sun.com/app/docs/doc/819-6258
    I've used it, found it on this page. http://docs.sun.com/app/docs/coll/1292.1

  • Netweaver Developer Studio Installation and Configuration Guide

    Dear Experts,
    I have downloaded the Developer Studio and Netweaver Composition Environment 7.1 trial version from SDN and have successfully installed the Server.  May I ask is there any Installation and Configuration Guide for the Developer Studio
    Your kind assistenance is appreciated.
    Thanks.

    Hi,
    This is the link for the installation and config guide :
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
    and here is the link to the master guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c7613c-0d69-2a10-ed8b-bfef43f2a8c6
    hope it helps!!!!!!!
    Pls reward points if found useful
    Edited by: Mohd Tauseef Ibrahim on Apr 23, 2008 12:52 PM

Maybe you are looking for

  • IPod not seen in Windows or iTunes

    Hi! Can you help? I have a click-wheel iPod which my friend has given me (she has gone overseas and updated to a newer model). I can't seem to get the iPod in either Windows or iTunes, and I have tried to follow the instructions on the website, but i

  • Use User Defined Tables in a Marketing Document on Row Level

    Hello All, Is there a way to use the fields from a User Defined Table in a Marketing Document on a row level such as for example Purchase Order. If this is not possible directly, any known work-arounds? Thanks for your effort, gr. Freek

  • How can I paint a line to the XY-plane specified??

    How can I get XY-plane that is specified before??? because I want add a line to the XY-plane!! thanks in advance!

  • Idoc to soap using BPM

    Hi, Plz give inputs/blogs link to do this scenario. i want to send idoc from R3 to web service(SOAP) using BPM bec i want to get the response. how many Message Interface i need to develop for this? Edited by: ruban R on Apr 1, 2008 12:29 AM Edited by

  • ERROR   OGG-01496  restarting extract

    Each time i restart the extract process after a normal stop i got this type of error: ERROR OGG-01496 Oracle GoldenGate Capture for Oracle, EXT1.prm: Failed to open target trail file P:\OracleGoldenGate\dirdat\lt000661, at RBA 5466894. Why and what c