SSRS Report loads faster on the reporting server compared to user's browser

If I run the same report from the same URL for my SSRS report it runs faster on the reporting server's IE compared to the user's IE.
If I run it in the reporting server's IE it takes 3 seconds and in my browser it takes 10 secs.
Is there a way to speed up loading the report on my IE?

Hi curiousnoob,
As per my understanding, when we run a report outside the report server, it spends more time compare to the report server can be caused by the following reasons:
We should connect to report server, then retrieve data from data sources for the report. This should spend some time when we run a report outside the report server.
The different IE browsers on those two servers.
Net Speed can also cause this issue.
So if we want to speed up loading the report, we can refer to the last two reasons.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

NeoDynamic Barcode Proffessional Upload Error in SSRS Report Server 2012

Hi,
I am Developing a SSRS Report for Displaying Barcode . I am Using Neodynamic Barcode Proffessional and the Report is Working fine in Developer Machine (MY Machine). When i try to Upload the Report into SSRS Report Server i get this Error Can any one Help on
this. Thanks in Advance
Note : I am Using SSRS 2012 Version and The Report Server is also the Same
Error : Error while loading code module: ‘Neodynamic.ReportingServices.Barcode, Version=7.0.2000.0, Culture=neutral, PublicKeyToken=c6b33c3093a0d4cd’. Details: Could not load file or assembly 'Neodynamic.ReportingServices.Barcode, Version=7.0.2000.0, Culture=neutral,
PublicKeyToken=c6b33c3093a0d4cd' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) (rsErrorLoadingCodeModule) Get Online HelpError in class instance declaration
for class Neodynamic.ReportingServices.Barcode: [BC30002] Type 'Neodynamic.ReportingServices.Barcode' is not defined. (rsCompilerErrorInClassInstanceDeclaration) Get Online Help There is an error on line 4 of custom code: [BC30451] Name 'Neodynamic' is not
declared. (rsCompilerErrorInCode) Get Online Help

Hi cbazrm,
According to your description, you add an external assembly to display barcode in your report. It works properly in developing environment. But it throw the above error after deploying onto report server. Right?
Based on the error message, the report server side doesn't have the assembly added, so it can't use the assembly to render the barcode.
In this scenario, we should copy the AgeAssembly.dll to the “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\bin” folder then drag and drop the assembly to the C:\Windows\assembly too.
Reference:
SSRS - Custom Code with External Assemblies
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Pre-Purchase Question - Deploying Crystal Report to SSRS Report Server

Our company has recently installed a SQL 2005 server for our accounting system. I had intended going down the path of using SQL Reporting Services as our reporting tool and deploying them to the builtin Report Server. However, I've been using Crystal Reports for years and find it much more user friendly for a non-programmer to use. I can actually write a report in Crystal, SSRS took me 3 days to achieve very little, I believe it requires too much SQL reporting knowledge for a beginner.
After spending many hours trawling the net looking for a solution to this problem, I found that Crystal comes as part of Visual Studio. However, I also believe the version of Visual Studio that comes with SQL2005 is the basic version, and I'd need the Pro version to get the Crystal add on.
To this end, I've downloaded the trial version of Crystal 2008 and installed it. I find I can write a report in Crystal, and then I can manually add that report to a SSRS project. When I open the Crystal Report within Visual Studio I can see all the correct Crystal toolbars and menus etc, so it would appear that the installation of Crystal for Visual Studio has integrated properly. I can then deploy that report to the Report server and see the report on the web page. However clicking to open the report then opens the full Crystal Reports application, instead of just displaying the report in the web page.
I've been unsuccessful in finding a solution to the above deployment problem. I'm seeking a solution so that my users can just see the report without Crystal itself opening up. I've been advised that there is a Crystal Report Server that I can purchase, but I don't wish to go to that expense when we already have this functionality built into our SSRS server.
Can you please advise if it's possible to deploy the Crystal report to the SSRS Report Server and then open the report within the web page without opening the full Crystal app, and if so what steps I would need to take to implement this.
If this issue can be resolved, I'll be more than happy to purchase the full Crystal 2008 package and forget SSRS as a bad idea.
Sorry to be so long winded, I wanted to be clear what the issue is. Any information /advice would be very much appreciated.

Hello Diane,
I would not know if Crystal Report can be used with SSRS but I know for sure that you can use the embedded Crystal Reports Version with comes with VS 2005 or VS 2008 to create reports and to display them in web and windows application.
We have lots of samples how to do this in our [dev community|https://boc.sdn.sap.com/].
Also, you can use [Crystal Reports 2008|https://boc.sdn.sap.com/developer/library/CR2008SDK] with MS SQL 2005.
Other products like Crystal Reports server can also use MS SQL 2005.
Please see our [supported platforms for CR 2008|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000712280&_OBJECT=011000358700000675322008E] on windows.
Hope this helps
Falk

Crystal Report Server 2008 Named User License

Hi,
Where can I find pricing info for Crystal Report Server 2008 Named User License?
This is for an existing Crystal Report 2008 Server installation, which was initially licensed with CAL. The user would now like to add dedicated NUL clients.
I found the following in the online store, but that includes a server license, which is not required in this case.
http://store.businessobjects.com/store/bobjamer/en_US/pd/ThemeID.29254600/parentCategoryID.57065700/categoryID.57103400/productID.105954100/categoryId.57103400
Thank you
Kind Regards,
Alain Braibant

You need to contact your sales contact in SAP. Pricing is not availble in public.

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox account, no password prompted and account is online and enabled... Thoughts?

Have you tried clicking on the lock to see it it will then ask for a passwored. Otherwise, try reblooting.

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

How to find out SSRS report server name

I'm trying to follow the steps for using SSRS web services (http://ssrstutorials.blogspot.com/2012/10/lesson-12-using-ssrs-web-services.html).
In Step 3:
Click advanced--> add web reference -- url - http://localhost/reportserver/reportservice2005.asmx
(replace localhost with your report server name).
How do I know what's my report server name?
Thanks,

Hi sherri71,
Sorry for that mark an incorrect reply as an answer.
The reply suggested by Akbar is about Instance Name, not report server name. Based on my further research, I find that the Reporting Services server name is the computer name which install
the report server. So we can try to click Start button, right-clicking Computer, and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
If there are any other questions, please feel free to ask.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

Project Server 2013 SSRS reports by logged in user group

Hi All,
We are using project server 2013. We have developed SSRS report. We need to display the projects based on the logged in user security group(e.g Project Manager, Administrator etc.) I tried with the below query got from a forums. But it is not working. Is
there is any way to get the security group of the logged in user using SQL query.
SELECT MSP_WEB_SECURITY_GROUPS.WSEC_GRP_NAME, MSP_WEB_RESOURCES.RES_NAME
FROM MSP_WEB_SECURITY_GROUP_MEMBERS INNER JOIN
MSP_WEB_RESOURCES ON MSP_WEB_SECURITY_GROUP_MEMBERS.WRES_GUID = MSP_WEB_RESOURCES.WRES_GUID RIGHT OUTER JOIN
MSP_WEB_SECURITY_GROUPS ON
MSP_WEB_SECURITY_GROUP_MEMBERS.WSEC_GRP_GUID = MSP_WEB_SECURITY_GROUPS.WSEC_GRP_GUID
Thanks in advance, Taj

Taj,
The query above gives you a complete list of user groups and users. It does not filter by resource name/group.
You can get the logged in user using the "USer Filter" webpart, on which the SSRS report is being displayed (assuming you are displaying it on a SharePoint page). You will need to pass this as a parameter into your SSRS report.
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=214
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=91
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com

SSRS Reporting Server system requirements

Where can I get the system requirements for a SSRS server that is a standalone reporting server. It's going to pull from databases on other servers, so this won't be running any heavy local databases. Could be up to 600 users. Would this just be
the SQL 2008 R2 requirements?

Hi Jlkansascity,
Based on your scenario, the SQL Server 2008 R2 Reporting Services can absolutely meet your requirement. For the Hardware and Software Requirements for Installing SQL Server 2008 R2, please see:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
However, the report server performance is affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount of data in a report, and output format. For more information about tools and guidelines about report
server performance, please see the
Planning for Scalability and Performance with Reporting Services as Vision2040 posted above.
Hope this helps.
Regards,
Mike Yin
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.

SSRS Report is not fully shown in browser

Hi All,
I have made a report using SSRS (Visual Studio 2013).
But when I deploy it on report server and then view it in browser using URL for e.g. http://myserver/reports then
the report is cut off from right side, that means it only shows half of the report. When I export that report to Word then it also displays fine.
Please let me know how to fix this one.
Thanks and Regards,
SK2811

Hi SK2811,
Based on your description, you are experiencing the issue when you viewing the report in Browser on Report Server, The report with some display issue that you can just see left half of the page, but when you export to Word it will display fine, right?
In your scenario, the issue could be related to the Browser settings or the compatibility between Report Manager and Browser. First, please check the version of the SQL Server Reporting Service and then check the type and version of your Browser. Not all
browsers support all report functionality.
Planning for Reporting Services and Power View Browser Support (SSRS 2012) (This article describes the support and requirements for Report Manager management features, viewing reports, the Report Viewer controls in Visual Studio)
If it is IE Browser you can have a quick test by changing the browser version before view the report to see if the same issue will reproduce:
Launch the IE , and press F12
Click Emulation icon on the left of the bottom and in the User agent string dropdown list select an supported version.
If the supported version works fine, try to reset IE to that version. Please also check the result in IE Compatibility View mode.
If still doesn’t help, you can reference to below similar thread and do the setting:
SSRS 2008 - Vista Security - Header Only
If you still have any question, please feel free to ask.
Thanks
Vicky Liu

Frozen process on report server after killing user process

Hi,
I've following problem. When user kill request(user process on PC) on creating report during process
(PDF file, report server 10g), the process on OAS stay frozen and nobody is able to create own report. When we use for creating report(PDF) Adobe destiller it was OK, but in this time we use options in ORACLE Report for creating PDF
Ivan

Primary Server Listener File
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.200)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = jsl)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = jsl)
Standby Listener File
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.201)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = jsl)
Thanks & Regards
Vijayaraghavan K

How can you display a dynamically loaded vi to the Web Server?

I am working with LabView 6.1 and the Web Server. I can call a subvi and have it display on a remote machine using a browser with no problem. But what I would like to do is dynamically load and run a vi and have it display on the remote computer using only a browser. I have tried a small example of a front panel that invokes the run vi method (and fp.open prop) on another vi when a button is pressed, but the invoked vi is displayed only on the local computer. Is there any way of viewing dynamically loaded vi's on a remote machine without having a copy of LabView running on it?

If i understand your question correctly, you want to monitor vi that are dynamically loaded on a remote machine without having LabVIEW installed on the machine from witch you want the monitor. I don't think it's possible how ever a good reference book would be Internet applications in LabVIEW. You can find it on BARNES&NOBLE.
Hope i could help

Load Balancing And the Login Server

We have just added load balancing to our cluster of 30980 portal servers. The load balancing works only sporadically. We noticed a round-robin approach was taken in the configuration guides, which is not acceptable to our infrastructure team.
Questions: Is there a problem with using load balancers such as Resonate with Oracle portal? If not, should one machine in the cluster be specifically identified as the login server? Can they each act as login servers for any of the others?

I have had the same problem.
I think whoever programmed the logon routine at that point should be fired immediately and banned from programming for life! Logging on is a very basic and well-understood task, and programmed gozillions of times since 1940s. Common sense and unwritten rules of programming dictate simply if you make something case-sensitive, then you should accept an input in its original form (i.e. password in smalls, or whatever) but not change it to uppercase and then work case-sensitively. Either this, or you program everything case-insensitively.
Fire that programmer or give him to us gollumvoice

Problem loading page, error the proxy server is refusing entry

My computer crashed a week ago, with numerous viruses. After it was fixed, when I go into Firefox, the screen I get is Problem Loading Page, then in a dropdown box it says the proxy server is refusing connection. Cannot get into the internet. What can I do?

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select No Proxy

Running the App Server as a user other than root

We used to use iPlanet Web Server which during installation allowed you to specify which user you wanted to run the Web Server. This was very good for security. How do you do this with the App server ?
Thanks
PS We are running it on Solaris 9.

Application Server 7 expands on the flexibility offered in the web server.
The most basic means to define app server instances with non-root users is to create an administrative domain (basically, an admin server instance) using the user ID of interest. As you create new application server instances in the admin domain, you can assign the same user ID to the instances.
(There is an admin domain that is initially configured as part of the app server installation. If you installed the product as root, then the admin server and the initially configured app server instance are owned by root. If you do not want these instances to be owned by root, you should remove this admin domain and create a new one that is owned by a non-root user.)
For example, with the following command, I've created a new app server config (an administrative domain) containing an admin server owned by user "ckamps":
root@canteloupe-{}: asadmin create-domain sysuser ckamps adminuser admin adminpassword password adminport 5050 ckamps.domain3
Created Domain ckamps.domain3 successfully
root@canteloupe-{}:
Then I create an app server instance within this admin domain:
root@canteloupe-{}: asadmin create-instance domain ckamps.domain3 sysuser ckamps --instanceport 80 instance1
Created Instance instance1 successfully
Note the use of the "--sysuser" option to specify the user that owns both the admin domain as well as the app server instance.
You can either use root to define the admin domain and the instances (in which case you need to specify the sysuser option to force a non-root ownership) or you can use a non-root user to define the admin domain and app server instances. In the latter case, specification of the sysuser is not required.
Since my instance is defined to listen on a privileged port, I'll need to set the "run as user" in the <instance-dir>/config/init.conf file (similar to magnus.conf in Sun ONE Web Server 6) AND ensure that I start the instance as root. Once the server instance starts up as root, it will automatically switch to the run as user.
The "User" setting below is the "run as user" specified in the admin console's "Create new instance" wizard.
<snip of init.conf>
NetsiteRoot /usr/appserver
ServerID instance3
ServerName canteloupe
PidLog /var/appserver/domains/ckamps.domain3/instance3/logs/pid
User ckamps
DNS off
</snip>
Alternatively, you can start up the newly defined admin server and create the new app server instance through the admin console.
Hope this helps,
Chris

SSRS Report loads faster on the reporting server compared to user's browser

Similar Messages

Maybe you are looking for