SSRS report- Request timed out error displaying when running.

I have a parameter which with other date ranges work but where the parameter for datetime is from 4/1/2013 to 5/1/2013 it brings this error:
Server Error in '/' Application.
Request timed out.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Request timed out.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Request timed out.]
How can I be able to determine the cause of this because the sql mgmt studio brings in the data really well at 15 seconds with hundreds of rows?
I am not trying to lessen the time for getting this data which one thing would be to reduce the amount of fields needed to lower reaction time for retrieving the data. I am just wondering why is it giving me this and what plans can I do to avoid these errors
from happening again?

Hi Elvin,
The issue might be related to the executionTimeout setting of the Web application. If you view the report in the report manager, please use the following steps to modify the web.config file:
Navigate to <Drive>:\Program Files\Microsoft SQL Server\MSRSX.<InstanceName>\Reporting Services\ReportManager, back up and then open the web.config file.
Search for httpRuntime.
Add maxRequestLength="100000" to the line of code, and reset the executionTimeout value so that the line looks like this:
<httpRuntime maxRequestLength="100000" executionTimeout="90000" />
If you view the reports on a SharePoint site, please modify the web.config file of the SharePoint Web application. For example, if the SharePoint Web application uses 80 port, then its web.config file is located in the C:\inetpub\wwwroot\wss\VirtualDirectories\80
folder.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Request timed out.- Error while opening a item in Blog

Hi,
   We have a blog in our share point portal which was running properly before few days.
We get Request Timed out error while opening an item in the blog. The list contains about
   3500 items
[HttpException (0x80004005): Request timed out.]
We were able to create a new item but not able to view the item.
When we check the server SQLSERVR.EXE takes more than 90% of the CPU Usage.
Please let me know how to resolve this issue.
Thanks,
Vanitha

Hi,
According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
to preform well. SQL requires 2GB RAM for optimum performance.
Messages like this are mainly due to lack of RAM Allocation.
Best Regards
David Hu

Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

Hi, couple of things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Request timed out error

I am getting this error message. when I add
"The Exception: Oracle.DataAccess.Client.OracleException Connection
request timed out at ...
Oracle.DataAccess.Client.OracleConnection.Open()
as a temporary fix I added pool=false to the web. config file and works fine. my question is what is the disadvantage of adding this to the web.config file and if there is a better solution to fix this proble.
I am working with ODP.net 11.2
<add name="test" connectionString="Data Source=xx;User Id=xx;Password=xx;pooling=false" providerName="Oracle.DataAccess.Client"/>
Please let me know how this can be fixed. thank you

Hi,
According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
to preform well. SQL requires 2GB RAM for optimum performance.
Messages like this are mainly due to lack of RAM Allocation.
Best Regards
David Hu

Adding items to custom list - performance issues - Request timed out error

Hi,
I am using VS 2010, c#.
I am inserting records from an excel file, which contains 6000 records to a custom list.
I am using the Visual webpart, and oledb connection. I am not using the openXML format, as i need to use "xls" and "xlsx" type.
I am doing the below steps currently:
1) From the file upload control, i am saving the excel to the sharepoint layouts - inside that a custom folder, to keep the records.
2) Using the oledb connection to read the records and fill it in a datatable.
3) Inserting the datatable values to a custom list.
Looping through the datatable and inserting 3000 – 4000 records to List, I am getting the "Request timeout error".
Below is the sample code, where i am looping the datatable and inserting the record:
SPList prjCmpList = oWeb.Lists[strListName];
SPListItemCollection prjCmpListItems = prjCmpList.Items;
SPListItem prjCmpListItem;
foreach (DataRow dr in dt.Rows)
try
prjCmpListItem = prjCmpListItems.Add();
prjCmpListItem["Title"] = dr[0];
prjCmpListItem["FirstName"] = dr[1];
prjCmpListItem.Update();
catch (Exception)
I am using the "using block" for the spsite and web objects. When I see the execution time out in my web.config it is set to 3600. But I am getting the request time out after 2 mins only.
I have checked these link's : http://msdn.microsoft.com/en-us/library/aa973248%28v=office.12%29.aspx
http://www.etechplanet.com/blog/how-to-import-an-excel-spreadsheet-in-sharepoint-and-save-it-as-a-custom-list.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8664375c-fae0-483a-b43f-ce7d353b896a/importing-3000-records-to-sharepoint-list-causing-requesting-time-out-error?forum=sharepointadminlegacy
However, I am following the best practices, and also the insertion of records is to be done programmatically.
Has anyone faced this kind of issue? How to fix this?

HI,
Thanks for the reply.
If the list has custom columns which consists of string and Date types, can the same type be used? Or should the list be an empty list without any columns?
In the xml if it is put as "onerror= continue", how to fetch the records which error out?
Also, in the datatable code block, which I had put in the first post, I am also trying as below:
if(dt[1] != null)
if(!string.IsNullorEmpty(dt[1].toString())
prjCmpListItem["FirstName"] = dt[1].toString();
Can these condition checks be performed with the "processbatchdata" approach?
Thanks

Why do I get this error (The request timed out.(102)) when i try and download an app from the mac app store?

I have been trying to download the new updates for Aperture , Safari, and Iphoto. I click update and it gets the download bar but it doesnt get passed 0 KB when downloading the apps. Previously I had gotten the NSURLErrorDomain error -3001.)(102) but that stopped. Why is it doing this?

typing
http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 %20n4a9yyq37g/Safari6.0.2Mountain.pkg
in the Safari address bar will download the update, but at the moment the Apple servers are very slow.

SMC 3.5 - SNMP request timed out error

hi
am testing SMC 3.5 and have installed three agents which are in the same subnet as the server (no firewalls). while one agent is working fine, but in the others, I cant open either the "Module Browser" or the "Module Manager" tabs in the console. But the other tabs like "logs" and "info" look good.
any pointers to how i can debug this issue?
thanks in advance
shivshan

I have a few questions:
1) Can you see the tabs but just not open them... or
do they not exist for the problem Agents?I can see the tabs but the modules dont show up for the problem agents.
2) Are the icons for the problem Agents little blue
folders, or are they tiny pictures of the hardware
like the icon for the Agent that works?i can see icons of the hardware.
3) What are the hardware types (i.e. Ultra5? Sun Fire
6800? Netra?) for all 3 hosts?all the agents are running on 280R.
i thought maybe the modules are not loaded but when i look at the agent.log, it states that all the modules were loaded and enabled!
for completeness: i also have a SMC 3.0 server polling few servers in the same subnet; though i dont see how this can create any problem.
thanks
shivshan

I keep getting The request timed out.(-1001) when I try to update

I am online, the network is working fine, it does this on every network I connect to, WTH?

If you are setting it up via USB try disabing the computer's antivirus and firewall.
Power off and then back on the router
Try when connect to another network if setting up via wifi

Request timed out when purchasing music. Fresh install of Win7.

For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally disabled I would still get the "Request timed out" error. And at the same time I'm getting these errors, a Podcast can be in the background downloading or I can be previewing a song! I eventually gave up and just figured its some random windows bug that isn't very common or its just another example of iTunes sucking for Windows and Apple not caring. I just purchased most of my music off AmazonMP3 which I've been doing more and more of anyway.
Yesterday I installed a new HDD and installed a fresh copy of Windows 7 Home Premium from my retail disc. I Installed all the updates then proceeded to install my software and put all my media back in-place. I'm a backup neat-freak so all this happen pretty easily and fast. I purchased a song off iTunes and was pleased to see it working again. Well here I am again suddenly having the issue with the connection timing out when purchasing a song. Firewall is configured fine and again I even disabled it. I know its not Windows now as there haven't been any new Drivers or Updates installed since I last purchased a song. I even tried different network adapters! What the heck is going on?

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

Cisco Prime and WLC packet capture error - Request Timed Out

Hello,
We have a Cisco Prime installation (2.2.0) and a WLC (Cisco 5508)
I’ve been trying to test the wireless packet capture function, but have now run into problems, a quick rundown of my actions so far:
Selected a wireless access point in Prime and clicked ‘Packet Capture’
Did a packet capture saving to the PI, the capture worked fine
Could not find any way to delete the packet capture
Selected a wireless access point in Prime and clicked ‘Packet Capture’
Did a packet capture saving to an FTP server, the capture worked fine
The 1st capture had finished (10 minute capture) before testing the second
The 2nd capture has also finished and saved the files to the FTP server as specified
Now though I cannot capture from any access point as when I click ‘Packet Capture’ I get the error:
“Request Timed out. Error in getting data from server.”
The error is ‘instant’ as in no delay indicating something actually timing out.
So the 2 problems I have are:
How do I fix the ‘request timed out’ error above
How do I delete old packet captures from the PI
I hope someone can help as I can’t find any info on either of the problems.
Cheers
Adrian

I think I've solved (2) by deleting the files from the FTP directory on the prime box through SSH.
So I'm now just stuck on the timed out error.

Connection request timed out - problem

Hi, our errorlog confirms there are regular "Connection request timed out" errors in our web-application (asp.net with odp 9.2.0.4).
Now we did a standard ODP installation, so i don't know how all the Pooling parameters are set up initially. But i found metalink note 261377.1 which states that the max number of connections also depends on the setting of maxconnections in the machine.config on the server. right now this setting is (windows server 2003):
<connectionManagement>
<add address="*" maxconnection="2"/>
</connectionManagement>
Apart from having to install patch version 9.2.0.7, could this be part of the problem? Or could this also be caused by wrong programming practice?
Furthermore: in metalink note 240997.1 i found an example of setting several pooling parameters at connect-time. Is this the only way to do it, or is there something like an odp.config where you can specify these parameters?
Regards, Paul.

Hi Paul,
1) "how the pooling parameters are set up initially": refer to the odp.net documentation, it tells you what all the default parameters are. The key parameter in this case would likely be "max pool size" which defaults to 100.
2) "maxconnections in machine.config": I looked at that note which doesnt contain very much detail, but couldnt force a problem. maxconnection="2" is apparently the default, it's what mine is set to, and I can open 100 connections without problem. It may be that theres another setting that can affect this (I doubt the guy who wrote the note just made the info up) but I dont know what that is top of my head.
3) the pooling parameters can only be set in the connect string itself. You could certainly store the settings in a System.Configuration.ConfigurationSettings.AppSettings file however.
4) "Connection request timed out" is typically not an Oracle software problem, but more frequently an issue with code not cleaning up after itself properly. To confirm whether you've hit "max pool size", check v$session; how many actual connections does that app have? Make sure you're closing and disposing the connection, and additionally the command, reader, etc, under all circumstances (ie, a finally block).
Hope that helps,
Greg

SharePoint Site Very Slow and some time Request Timed Out

Hi All
I have many Web Application is running in SharePoint Farm. Since yesterday one of the web application started responding very slow. It takes 5 to 6 mins to load the page. Some time i received request timed out error message. But all other web applications
are working good.
I increased executionTimeout value, stall it slow / not responding.
Please let us know if you have come across this issues or any suggestion from your end to resolve this issue.
Thanks in Advance - Guru
Cheers, Guruprasad

i would recommend enable the developer dashboard on the web app and check which task is consuming the more time i.e. webpart, query to database etc.
also any change to web app since the issue started, any new webpart added to the page, any solution deployed or something else.
also did you try to recycle the app pool of the web applications?
how many wfe in the farm?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Slow reports giving "An error has occurred: Request timed out" on first run

I have BO XI R1 SP4 installed on Windows 2003 R2 SP3 with .Net 1.1 installed.
Most of our reports are quite large (>60000 rows returned) and will timeout in InfoView when first run and give the message in the subject. When you close the window and re-run them then they come up almost straight away.
This tells me that the report runs and it gets stored in the cache server, which is fine, but I want to be able to eliminate the timeout for the users.
I found a solution if .Net 2.0 is installed (HOW TO: Resolve 'An error has occurred: Request timed out' issue) but my server only has .Net 1.1.
Is there a change to a timeout I can made to the server as it is, or should I install .Net 2.0 and change IIS to use that version of .Net then make the solution change already suggested?
TIA
I should add that the timeout is after around 5 minutes, so the normal changes recommended at note 1198539 doesn't seem to apply, as the timeout happens after the normal 90 seconds expires for some time.
Edited by: Geoff Croxson on Sep 3, 2009 2:02 PM

Will something like this work on an iPhone and where would I locate it? My App Store was working just fine and this last week it's been slower and slower, plus difficulties with downloading and updates. Both my downloads and updates start and then pop up a 'can't install at this time'. I thought it might b my storage space so I started deleting. Well I have plenty of space now and still get same problem.
Now over the last two days I will type in a search to reinstall the apps that I removed and the App Store tells me request timed out.
Help please

Timed out error when running a report

The error is:
"Request timed out because there has been no reply from the server in 600000 ms"
Does anybody have any idea how to solve the issue?
The following is more info on the report:
Report has 8 subreports and data set is around 7MB size
We generated another report with 83MB of data and this report doesn't have any subreports and its running completely.
using Crystal reports XI r2 SP3, Visual studio 9, BOXI server SP3 and using XML as data source.
Any help would be appreciated.
The following is the Stack Trace:
System.Exception was unhandled by user code
Message="Load report failed."
Source="CrystalDecisions.CrystalReports.Engine"
StackTrace:
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, EnterpriseSession enterpriseSession)
       at Covance.ED.Framework.Reporting.Workflow.CreateReportOutputActivity.executeCrystalReport_ExecuteCode(Object sender, EventArgs e) in C:\Source\TR\Components\Framework\Covance.ED.Framework.Reporting\Workflow\CreateReportOutputActivity.cs:line 189
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
InnerException: System.Runtime.InteropServices.COMException
       Message="Failed to load info object."
       Source="Analysis Server"
       ErrorCode=-2147467259
       StackTrace:
            at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       InnerException:

There are a few timeouts that could come into play here. One is a Corba timeout.
You'll want to adjust your ConnectionTimeout in your regisry under HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECTS\Suite 11.5\CER. The default value is 600000. Try doubling it to 1200000.
You may also want to increase your httpExecution timeout as well in your web.config file.
http://msdn.microsoft.com/en-us/library/e1f13641.aspx

HOW TO: Resolve 'An error has occurred: Request timed out' issue

Post Author: fmi-charles
CA Forum: Crystal Reports
After doing a new install of BOE Server software, encountered a problem viewing long running reports on-demand. InfoView displayed: 'An error has occurred: Request timed out.' Couldn't find answers anywhere (not even on this site) that would help me resolve this issue. So, I decided to post the resolution.
The error from this post's subject line is displayed when viewing on-demand reports that run for longer than 90 seconds. If the report was scheduled, it wouldn't have a problem - only viewing on-demand. This issue transpires with the following setup: * M$ Windows 2003 Server * IIS v.6 * .NET 2.0.50727 * BO Enterprise Server XI R2 SP2 * M$ SQL Server 2005
The resolution is to find the 'machine.config' file for your current version of the .NET Framework (e.g. C:\WINDOWS\Microsoft.NET\Framework \v2.0.50727\CONFIG\machine.config). Edit the file and place the following into a new line within the 'system.web' section: <httpRuntime executionTimeout="3600"/>
The timeout is set in seconds.
Then, restart IIS using the command line.

Hello Cristinel -
Thanks for send your inputs but I have solved this error.
I would like that if you solve my this question.
My project's URL is http://www.lampslightingandmore.com/
I want to put w3stander HTML logo in my website.
I have done many error but some error i could not understand.
please click on below url and send me your suggestion how to solve this errors?
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.lampslightingandmore.com%2F
I hope you send your best inputs.
Thanks

SSRS report- Request timed out error displaying when running.

Similar Messages

Maybe you are looking for