Staging area different from target - which KM???

Hi,
I need to transfer data from CSV to DB (only new inserts operation)
I am working the following KM's
LKM File to SQL
IKM SQL Control Append
It's working fine. However now i need to keep the staging area (where C$, I$ etc table are created) in a separate schema.
I have created a diff schema for staging area and selected in the interface "Staging area different from target"
However not sure of which KM's to use.
Please let me know how to achieve this.
Thanks,
Rosh

Hi
1st thing you have to give the workschema for temp tables when creating physical schema in dataserver for target.
Then you have to select the workschema in overview of interface as "staging different from target".
After doing this when you will use predefined KM for the interface it will create temp tables in workschema.
Now suppose you are not giving the workschma at the time of creating physical schema and you have selected "staging different than target" in interface.Here your C$ table will be created in your workschema but I$ table that is used by IKM is going to be created on target schema.So for this again you have change the IKM KM i.e. where to create I$ table (wokrschema) by selecting the corresponding logical schema.
So its better you give the workschema at the time of creating physical schema.
Here is the query to give privilege by the sys_dba
Grant create any table to ODI_TEMP.
Hope you got it
(Please mark the answer as correct or helpful and close the thread)
Thanks

Similar Messages

Staging area different from target

I am using oracle 10g as target database. I want to upload a flat data file into oracle table.
I uploaded sucessfully using LKM Oracle (SQL Loader) in Interface. In this case i am using oracle database as a staging area. So all load transferred to my database at the timing of processing.
I want to create staging area at my file server. So please help me out to resolve this problem.

A staging area must accept SQL syntax.
A File server won't accept SQL syntax.
So if you speak about Physical Server where you got your file and if there is a RDBMS installed in maybe but else I don't really know how you can...
You can specify another data server for your staging area or use the SUNOPSIS_MEMORY_ENGINE which use the cache I think but it's not optimized I think...
For this in the Definition Tab of your Interface choose Staging Area different from the Target and then select in the list box SUNOPSIS_MEMORY_ENGINE.

Lookup issue when staging area diff from target

Hi,
I am using staging area different from target (csv file to database)
Everything is working fine the source data is moved to target. The interface runs suiceessfuly.
Now i want to add a lookup during transformation using a lookup table.
When i do that using lookups in quick edit section, i am getting an error.
When i run the interface, the C$ gets created in staging area - that is correct.
However when inserting from staging to target, now the ODI searches for the C$ table in target area instead of the staging..
Please help.
Thanks,
Rosh

Hi
1st thing you have to give the workschema for temp tables when creating physical schema in dataserver for target.
Then you have to select the workschema in overview of interface as "staging different from target".
After doing this when you will use predefined KM for the interface it will create temp tables in workschema.
Now suppose you are not giving the workschma at the time of creating physical schema and you have selected "staging different than target" in interface.Here your C$ table will be created in your workschema but I$ table that is used by IKM is going to be created on target schema.So for this again you have change the IKM KM i.e. where to create I$ table (wokrschema) by selecting the corresponding logical schema.
So its better you give the workschema at the time of creating physical schema.
Here is the query to give privilege by the sys_dba
Grant create any table to ODI_TEMP.
Hope you got it
(Please mark the answer as correct or helpful and close the thread)
Thanks

Staging different from target giving error

Hi Friends.
when i am making staging different from target its giving error not enough privillege to create table.
What changes i should do so that my IKM will work.
Thanks in advance for the help.
Linkan

Wow
Thank you very much for such quick response.I have privillege to create table,view,..... in my staging area not on target. I had asked DBA but he denided to give create privillege in target.Its only in my staging schema.
I will try to change the schema & will check if its working or not.
Thank you very much again.

Backed up using i-cloud now can not restore because security questions are different from apple account?

i just purchased a new i-touch for my son becasue he smashed th old one. I purchased it at the apple store and the tech told me to back info up utilizing i-cloud. I did that inside the store. I am trying to set the i-touch up using the i-cloud backup but when i get to the security question part, the questions are different from my apple account. I then get an error message saying server error. I called apple and they did not seem to be much help.

Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Explain that after resetting your password, you are still asked for the answers you have forgotten, before you can gain access to My Apple ID > Manage your account > Password & security, which is where you need to be to change your answers.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

Error in ME51N - Account object functional area differs from asset master

We are in the middle of going thru an upgrade -
Funds & Functional Area were display fields in the old system but it was recetly changed to required fields in the Asset Master Record (AS01). Now when I try to create a Purchase Requisition for procuring the asset, I get this error - We are in the middle of going thru an upgrade -
Funds & Functional Area were display fields in the old system but it was recetly changed to required fields in the Asset Master Record (AS01). Now when I try to create a Purchase Requisition for procuring the asset, I get this error - Account object functional area differs from that in asset master record. Any suggestions?. Any suggestions?

The functional area what is comming is not the same in Asset accounting as you get from ME51N.
What functional area you get from ME51N and what is the asset.
Is the functinal area in the cost center not the same as you filled in the asset?

How SAP smartforms are different from Adobe forms

Hi,
Can anyone explain me how SAP smartforms are different from Adobe forms
Tthanks&Regarda
Rama Devi

Hi,
Both are same but adobeforma are advance version of smartforms
for more details check with the following links
Smartforms:
tcode:smartforms
[Smartforms|http://help.sap.com/saphelp_nw04/helpdata/EN/a5/de6838abce021ae10000009b38f842/content.htm]
Adobeforms:
tcode: sfp
[Basics of Adobe|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4]
[Adobeforms|http://help.sap.com/saphelp_nw70/helpdata/EN/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm]
Hope this helps you.
Regards,
Rajani

Can anybody help me in finding the reasons why the time of email received are different from the one on my macbook which time is correct

Hi
Can anyone help me in finding the reason why the date on e=mail reced is different from the one on my MacBook eventhough it is correct
Thanks

Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2

SM37 - executing server different from target server

Hello Everybody,
Most of our jobs are scheduled to run on a unique target server,
but when i occasionally check all the finished job report on sm37 i find that -
small amount of jobs finally ran on executing server which is different from the specified targer server.
we are not facing any resources issues,
so may anyone know how to analyse it? and what are the possible reasons this problem may occur?
have a nice day.

I think that's an issue for SAP via OSS. Have you checked for notes yet? I do see several notes that apply but mostly for releases 6.4 and earlier. I don't know of a system profile parameter that would allow that setting to be overridden but that doesn't mean that there isn't one...

My albums in Itunes are different from those on my Ipod

I've collected songs in different albums in Itunes (like the 90's), but when I sync my Ipod, there are songs from the same album that stand apart (I get 3 times 'the 90's as album). I've already tried 'compilation' and all the information is the same for each song... How can I change this, so all of the songs are in the same album on my Ipod?

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder.
3 - reboot, launch iWeb, reset the colors and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

Why when I open my raw files into lightroom, colors are different from my camera's preview?

Ciao,
I have a problem... maybe this can be a stupid question but anyway.. I would like to know the reason why when I open a raw image in lightroom, for a second I see the right colors/tone/contrast that i see when i look at the same images on my camera and soon after the word "Loading" I see the raw files with different colors.
Why this happens???
Before "Loading" and --> after
Thank you so much

Hey Giuseppe
I have a similar problem but the cause may be different from yours. I shoot a Canon 6D and as far as I know no one with the 5D MKIII has my issue, but maybe you could look into it.
Canon's Adobe Camera Raw in Photoshop CC, as well as Lightroom CC, is automatically down converting my CR2 RAW files from 14 bit color depth to 8 bit color depth. This is screwing up my colors, contrast, gradients, etc quite a bit when trying to process RAW files in Photoshop CC and Lightroom CC.
You can read my thread here:
Banding due to automatic downconverting of RAW files to 8 bit
You might want to check and see if your RAW files are actually being processed in 16 bit color depth. There is a possibility that they are being down converted automatically for some reason.
The bit depth in Lightroom for RAW files is supposed to be 16 bit but when opening my files it just converts it down.
Try downloading Canon's Digital Photo Professional 4
Canon U.S.A. : Consumer & Home Office : EOS 5D Mark III
Use that software to process a RAW photo and convert to a 16 bit TIFF. I know this software truly gives you a 16 bit depth image. Then compare the result side to side with what you're seeing in Lightroom.
If you are having this issue, I have not yet found a way to process RAW CR2 files in ACR or Lightroom and maintain 16 bit depth.
If you are batch processing to JPEGs it probably doesn't matter, but my issue is that it is down converting BEFORE exporting and thus any edits I do become much more destructive on my 8 bit image than they would if I was editing a 16 bit image. I have to be able to keep things in 16 bit up until the point they go to the printer.
Sorry, this may not help you at all, it looks like there could just be a difference in White Balance, but I figured I'd throw my two cents out there and maybe you could see if this is actually what is happening for you, and hopefully eventually Adobe could potentially fix this bug.

Values are different from R/3---A.H.P R SOMEBODY PLZ HELP

Hi gurus,
i have a weekly stock cube in Inventory
when i check the stock value for a material its correct but the material has different sizes like a, b, c, but the sock values of the material in different sizes are not matching at all with R/3 but the overall stock value is matching
what could be the reason ????
In weekly stock cube will it also consider daily recipts and issues and give us the exact report even the week is not completed for example
we have already completed 22 weeks and r running in 23 week so if want a status of a material will it show only the status as of 22nd week r else it will take into considerataion into the 23 issues and receipts.
becoz i am using the stock cube which is only having time char as 0calweek and r/3 is giving stock details as of now.
regards
neelu
Message was edited by: Neel Kamal

Hi DMK,
We are using the SAP standard cube AFMM_C02--> stock on weekly basis.
so even the update rules are standard and we have not done anything to get the size values has we have standard object called grid value when we try to view information in drill down by sizes then we are not getting the right info for the grid values
and we are having deltas every day.....then even if we have entered into the 22nd week it should show us the actual quantity right
and i have found this code in my update rules....its a standard one and its almost the same for other 3 keyfigures
IF ( COMM_STRUCTURE-PROCESSKEY = '100'   "Other Issues
   OR COMM_STRUCTURE-PROCESSKEY = '101'   "Returns / Vendor
   OR COMM_STRUCTURE-PROCESSKEY = '104'   "Material Transfer
   OR COMM_STRUCTURE-PROCESSKEY = '105'   "Stock Adjustment InvD -
   OR COMM_STRUCTURE-PROCESSKEY = '106'   "Stock Adjustment Other -
   OR COMM_STRUCTURE-PROCESSKEY = '110' ) "Issues from Stock Transfers
AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
Only movements which are relevant for stock control
AND COMM_STRUCTURE-STOCKRELEV = '1'
AND COMM_STRUCTURE-CPQUABU <> 0.
result value of the routine
   RESULT = COMM_STRUCTURE-CPQUABU.
if the returncode is not equal zero, the result will not be updated
   RETURNCODE = 0.
ELSE.
if the returncode is not equal zero, the result will not be updated
   RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
PLZ MAKE ME UNDERSTAND WHAT DOES THIS CODE MEANS I HAVE NO KNOWLEDGE IN ABAP.
THANKS
thanks and regards
neelu
Message was edited by: Neel Kamal

Thumb drive will not accept duplicate numbers altho pics are different from iPhoto. Can numbers/labels be changed?

iPhoto 11, vers. 9.2.3 - Photos downloaded from my camera have a set of numbers which are repeated with each download posing a problem when trying to place them on a CD or thumb drive as the duplicate numbers are not accepted. I have well 2500 photos and possibly dozens of duplicate numbers. I thought I could simply modify the name of each photo but that does not work. Any suggestions would be appreciated, thank you.

Two simple solutions
1 - export to different desktop folders on the desktop and then drag those folders to the thumb drive - duplicate file names in different folders are fine (you can not have duplicates in the same folder)
2 - export to a desktop folder using the sequential file name option - Exporting From iPhoto - and drag that folder to the Thumb drive
LN

My playlists on iTunes are different from my iPhone 5s

My playlists on iTunes [version 12.1 for Windows (64-bit)] are completely different (names, order, contents) from the playlists on my iPhone 5s (IOS 8.1.3). How can I "transfer" the lists organized in iTunes to the iPhone? Formerly, I didn´t have problems to synchronize them.

I am having the same problems with my iphone as well. I deleted the software and reinstalled it and for the life of me it would not load my apps that i have recently purchased.
My suggestion to you is to try and run a dianostic test from iTunes with your iPhone connected to the computer. it might help.

Emails are Blocked from domains which are added to "BypassedSenderDomains" in Exchange 2007 Edge server

Hi,
We have an Exchange server 2007 and an Edge server 2007 is configured in the perimeter network. Most of our clients use Public email domains such as Yahoo and Gmail. Last few weeks it has been a major issue for us that most of the emails from Yahoo/Gmail
get blocked by our Edge server calming the sender IP address is in Block Lists.
As a solution I've added yahoo.com/gmail.com/aol.com/hotmail.com to "BypassedSenderDomains" hoping if emails receive from one of these domains it will bypass the connection filtering. But still some of our customers complain that their emails are
still not passing to us and blocked by our edge server. They have provided me the error message they receive.
Our clients get following error message
edgexch gave this error: Recipient not authorized, your IP has been found on a block list
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction
may be preventing delivery.
550 5.7.1 Recipient not authorized, your IP has been found on a block list
When I check the Agent logs in Edge server I found specific email had been blocked. Please check one of the log entry.
Timestamp       : 1/30/2014 1:45:15 PM
SessionId       : 08D0E865200E7CBF
IPAddress       : 98.139.213.140
MessageId       :
P1FromAddress   : Sender Email Address (@yahoo.com)
P2FromAddresses : {}
Recipients      : {Recipient Email address}
Agent           : Connection Filtering Agent
Event           : OnRcptCommand
Action          : RejectCommand
SmtpResponse    : 550 5.7.1 Recipient not authorized, your IP has been found on a block list
Reason          : BlockListProvider
ReasonData      : bl.spamcop.net
This troubles me because I've added Yahoo.com to "BypassedSenderDomains" on 1/28/2014 and this email was blocked on 1/30/2014. I've checked whole Agent logs from 28th to-date and found most of the messages from white-listed domains bypassed
the content filtering but some were still getting blocked. Most of the messages from white-listed domains were blocked from "bl.spamcop.net " IP block list provider.
As a solution for the current situation I've disabled "bl.spamcop.net" from the "IP block List Providers". But the issue is, why the mails are getting blocked even the domains were white-listed. I though after white-listing emails domains,
messages will bypass the content filters if the email generates from one of the white-listed email domain.
I've also added the "Content Filter Config" for your reference.
[PS] C:\Windows\system32>Get-ContentFilterConfig
Name
: ContentFilterConfig
RejectionResponse
: Message rejected as spam by Content Filtering.
OutlookEmailPostmarkValidationEnabled
: True
BypassedRecipients
QuarantineMailbox
: [email protected]
SCLRejectThreshold
: 7
SCLRejectEnabled
: False
SCLDeleteThreshold
: 9
SCLDeleteEnabled
: False
SCLQuarantineThreshold
: 5
SCLQuarantineEnabled
: True
BypassedSenders
BypassedSenderDomains
: {yahoo.com, gmail.com, hotmail.com, aol.com}
Enabled
: True
ExternalMailEnabled
: True
InternalMailEnabled
: False
AdminDisplayName
ExchangeVersion
: 0.1 (8.0.535.0)
DistinguishedName
: CN=ContentFilterConfig,CN=Message Hygiene,CN=Transport Settings,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,CN={4546F49-6BC5-4F7A-848F-03E4652528A6}
Identity
: ContentFilterConfig
Guid
: c501959c-b062-4f59-8f0c-404c53f54a34
ObjectCategory
: CN=ms-Exch-Message-Hygiene-Content-Filter-Config,CN=Schema,CN=Configuration,CN={4546F4196BC5-4F7A-848F-03E4652528A6}
ObjectClass
: {top, msExchAgent, msExchMessageHygieneContentFilterConfig}
WhenChanged
: 1/28/2014 8:48:49 PM
WhenCreated
: 1/8/2012 8:42:18 PM
OriginatingServer
: localhost
IsValid
: True
It would be great if someone could help me to resolve this issue because this is a major problem since we lost mails from our valuable customers.
Thanks in advance.
Tharaka

Here is a similar issue someone with Exchange 2010 -
http://social.technet.microsoft.com/Forums/exchange/en-US/36aec4f6-6d73-4d71-ab64-e7f3d817b39b/exchange-2010-still-blocks-mail-from-domain-on-dnsbl-even-though-its-on-bypassedsenderdomain?forum=exchange2010. So in essence, use the exceptions tab for
the IP Block List Providers. See if that will work as a solution for you.
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.

Staging area different from target - which KM???

Similar Messages

Maybe you are looking for