Standard Container element not populating....
Hi All,
I am using a standard task TS17900100 to process the HCM Form in workflow at 2 places. There is a standard container element STEP_OBJECT of this task which gets populated at run time.
Now at first place this container is getting populated correctly. But in the second place I have used the same binding and same task but STEP_OBJECT container is not getting populated. Also, STEP_OBJECT is not an import/export parameter.
Please suggest.
The task is using the following class and method :
CL_HRASR00_WF_COMPONENTS
WI_EXECUTION_VIA_R3_INBOX
Hi,
I have checked the bindings in both the steps. It is same and all the containers are getting populated in the log except STEP_OBJECT. That's why I am not getting the reason for such a case. STEP_OBJECT is getting populated by itself in the first step. But it is not getting populated in the second step.
Please suggest.
Regards,
Guddan
Similar Messages
-
Worflow container elements not populating
Hi,
I am using a simple method and populating certain parameters of the method. in stand alone from swo1 the method populates the container element. This method is then called from a task in workflow.
The problem I face is that the workflow container elements are not populated, although the container elements at the task level are populated corectly in the workflow log. Even If I am binding a hardcoded value at the task to workflow binding level, the workflow container elements is not getting correct values; when I check the log and hence the workflow goes in error.
I would like to know why the workflow container elements not getting filled with right values. I have done many workflows before but never faced such an issue before.
Regards,
Vishal Bhatia
Edited by: Vishal Bhatia on Sep 19, 2011 2:33 PMHi,
I have checked the binding and workflow is activated again.
Also buffering was done in SWU_OBUF.
I also tried to run the workflow from SWDD itself and still the same problem. This is very strange. Never before i encountered such an error.
Kindly suggest. I also tried to create a new task and change the names of container variables in workflow. The strangest thing is the hardcoding of value also not being passed.
Types of parameters match and import export set accordingly.
Regards,
Vishal Bhatia -
Using Standard Container elements as Method Parameters
Hi
Seems that Methods doesnt accept standard Container Elements like '_WI_Result' etc as importing parameters.How to access such elements this within method/secondary methods?
Regards
ImmanHi,
Usually the WIRESULT is an exporting parameter of a workitem that has a result parameter in the Object Method. When you finish the processing of that specific workitem you can capture the value of the WIRESULT.
For this you will have to:
1. Create a workflow container of the type WIRESULT.
2. In the binding of the method which has the result parameter define the binding from the task container to the workflow container. This is usually the second part in the binding screen. The first part is the binding from the workflow to the task and then the second which is below the first is the binding from the task to the workflow.
You can then acccess the parameter in the workflow.
Hope this helps,
Sudhi -
Return order BUS2102 Workflow container data not populated
Hi All,
Please requesting you to provide your advise on the below issue.
I have created a custom workflow with business object BUS2102
In the Workflowtemplate (E.g. WS90000XXX)
i have included the triggering event for BUS2102 with EVENT "CREATED" and
added a container element SDReturnCN of type BUS2102
Once the Return Order is created the Workflow is getting triggered successfully
but data is not populated into the container SDReturnCN.
Do i need to write and EXIT to populate container UNLIKE as in Credit memo bussiness object :BUS2094
if yes please let me know which part i am missing.
Thanks & Regards,
Veeru.Hello,
"but data is not populated into the container SDReturnCN."
Check the bindings. Where is the value coming from?
regards
Rick Bakker
hanabi technology -
Over Time Workflow Container elements not updated
Hi,
I am using Standard Task TS20000459 for approval of Overtime entered for an employee in CAT2 transaction.
Work item is getting generated to his manager's inbox.
Issue is, subject of the work item should have employee number and Employe name. Standard Task contains Container elements &TS_PERNR& and &TS_ENAME& which is not getting filled with any values.
Can any one suggest me how to get the same?
Regards,
Saravana PerumalHi Shanti
I faced the same problem...And i resolved that problem by binding...
Create the container element for PERNR and ENAME in the standard task ts20000459 as well as in workflow container.Then bind those container values.
Before bind the workflow and task container, you have to bind the workflow container with the event container.
Regards,
Hemalatha. -
0PM_ORDER - WBS element not populated by extractor
Hi all
Just wondering if anyone has experienced a similar problem.
We use this data source as part of our PM master data loads. It runs every night, no problem. Iu2019m busy with a new user requirement regarding Project (WBS) costs as posted on PM orders, and I was pleased to see that 0PM_ORDER has field PROID (WBS) on it already u2013 thought I was half way to building my query!
Except, the field is not populated. Even when I run the extractor on the R/3 system to test (for an order type PM05 on which WBS element is a required entry), I never get any values in this field. I had a look on SDN and OSS and have seen a number of posts about the conversion exits relating to WBS elements, but this presupposes that a value is being populated in the extractor, which in my case is not happening.
Does anyone have any suggestions?
Regards, Lara0PM_Order extracts the data of WBS element on the tab "location" on the PM order (IW33). It doesnt extract the WBS element on the tab "Additional data".
I am not sure how these WBS elements are different, your PS consultant might have an answer. Either you can have user exit to fill this field or ask your ECC abap consultant to fill the same in both fields of order, if doesnt make any difference. I am also in same situation, keep me posted if you have have get any new information from your PS consultant or SAP. -
BPM Alert Container Elements Not Filled
Hi All,
Another problem i am facing when i am raising alert from BPM.
In inbox i see alert message being raised but with no text.
I have also subscribed to email alerts.
In the email the subject is Process 000000008058
and the content is the first alphabet of the AlertMessage container element.
Ex : In BPM my container element is AlertMessage and the message assigned is <i>Error</i> . Then in email message i only get E. where as in alert inbox i get nothing.
ps : im using XI 7.0 SP 9. there are no notes which are applicable for this release.
Regards,
Rahul
Message was edited by:
Rahul JainHi Bhavesh,
<i>>When you select Dynamic text in the Alert category, the Container tab will no longer be available in ALRTCATDEF for your Alet Category.!</i>
the container tab is available but the Long& Short text tab is disabled.
I did not mean that..
What i meant was see next to the Properties tab in Alert Category defination there is a Container tab where we define our own container elements.
Do i need to define the names there..or i can directly use in the BPM?
Regards,
Rahul
Message was edited by:
Rahul Jain -
Step Container Element not getting updated
Hi,
I have created a step container element for handling comments with the same ABAP dictinary structure & import export parameter of a existing workflow conatiner element & binded with the WF container & step conatiner & i have the saved & activated the WF template sucessfully.but when action is being taken from portal on a Workitem then comments are being passed to the WF container but the step container that i created is not getting updated . i checked in SWI6 , it's showing not set.
can any help me on this regard.?
Thanks & Regards
Rohan Kumar DasActually, I believe the problem is related to binding.
When called in the foreground, object references (and data references) are present in memory for all subsequent processing.
You probably need to make the CONTAINER "Persistent".
In your code, call the macro SWC_CONTAINER_TO_PERSISTENT <container name here>. For example:
SWC_CONTAINER local_container.
SWC_CREATE_CONTAINER local_container.
" Set you Container elements
" SWC_SET_ELEMENT local_container 'Element01' lv_element01.
" SWC_SET_TABLE local_container 'Element02' lt_table02.
SWC_CONTAINER_TO_PERSISTENT local_container.
" Start your workflow passing local_container.
Something like this...
Hope this is relevent . . . Apologies if not . . .
Regards,
Tom Carruth -
Container element not available when task is background
Hi All,
We have a task and method. the method works fine when tested individually, returns the correct values.
However when the task is executed in background mode, the element in container is not updated. If the processing mode is foreground, the element is rightly updated in container.
Clearly it has nothing to do with binding since I get the elements when I execute the task in foreground.
any ideas would be welcome.
thanks,
GautamActually, I believe the problem is related to binding.
When called in the foreground, object references (and data references) are present in memory for all subsequent processing.
You probably need to make the CONTAINER "Persistent".
In your code, call the macro SWC_CONTAINER_TO_PERSISTENT <container name here>. For example:
SWC_CONTAINER local_container.
SWC_CREATE_CONTAINER local_container.
" Set you Container elements
" SWC_SET_ELEMENT local_container 'Element01' lv_element01.
" SWC_SET_TABLE local_container 'Element02' lt_table02.
SWC_CONTAINER_TO_PERSISTENT local_container.
" Start your workflow passing local_container.
Something like this...
Hope this is relevent . . . Apologies if not . . .
Regards,
Tom Carruth -
WBS element not populating at item level
Hi Gurus,
<br>I am trying to create a new sales order using the function module SD_SALESDOCUMENT_CREATE but when i pass a <br>value for the WBS element at item level it is not getting populated in the back end system.
<br>
<br> data :LT_RETURN TYPE TABLE OF BAPIRET2,
<br> LT_SALES_ITEMS_IN TYPE STANDARD TABLE OF BAPISDITM,
<br> LT_SALES_ITEMS_INX TYPE TABLE OF BAPISDITMX ,
<br> LT_SALES_PARTNERS TYPE TABLE OF BAPIPARNR ,
<br> LT_SALES_SCHEDULES_IN TYPE TABLE OF BAPISCHDL ,
<br> LT_SALES_SCHEDULES_INX TYPE TABLE OF BAPISCHDLX ,
<br> LT_SALES_CONDITIONS_IN TYPE TABLE OF BAPICOND ,
<br> LT_SALES_CONDITIONS_INX TYPE TABLE OF BAPICONDX,
<br> LT_SALES_CFGS_REF TYPE TABLE OF BAPICUCFG ,
<br> LT_SALES_CFGS_INST TYPE TABLE OF BAPICUINS ,
<br> LT_SALES_CFGS_PART_OF TYPE TABLE OF BAPICUPRT,
<br> LT_SALES_CFGS_VALUE TYPE TABLE OF BAPICUVAL ,
<br> LT_SALES_CFGS_BLOB TYPE TABLE OF BAPICUBLB ,
<br> LT_SALES_CFGS_VK TYPE TABLE OF BAPICUVK ,
<br> LT_SALES_CFGS_REFINST TYPE TABLE OF BAPICUREF ,
<br> LT_SALES_CCARD TYPE TABLE OF BAPICCARD ,
<br> LT_SALES_TEXT TYPE TABLE OF BAPISDTEXT ,
<br> LT_SALES_KEYS TYPE TABLE OF BAPISDKEY ,
<br> LT_SALES_CONTRACT_IN TYPE TABLE OF BAPICTR ,
<br> LT_SALES_CONTRACT_INX TYPE TABLE OF BAPICTRX,
<br> LT_EXTENSIONIN TYPE TABLE OF BAPIPAREX ,
<br> LT_PARTNERADDRESSES TYPE TABLE OF BAPIADDR1 ,
<br> LT_SALES_SCHED_CONF_IN TYPE TABLE OF BAPISCHDL2 ,
<br> LT_ITEMS_EX TYPE TABLE OF BAPISDIT ,
<br> LT_SCHEDULE_EX TYPE TABLE OF BAPISDHEDU ,
<br> LT_BUSINESS_EX TYPE TABLE OF BAPISDBUSI ,
<br> LT_INCOMPLETE_LOG TYPE TABLE OF BAPIINCOMP ,
<br> LT_EXTENSIONEX TYPE TABLE OF BAPIPAREX ,
<br> LT_CONDITIONS_EX TYPE TABLE OF BAPICOND ,
<br> LT_PARTNERS_EX TYPE TABLE OF BAPISDPART ,
<br> LT_TEXTHEADERS_EX TYPE TABLE OF BAPISDTEHD ,
<br> LT_TEXTLINES_EX TYPE TABLE OF BAPITEXTLI ,
<br> LT_BATCH_CHARC TYPE TABLE OF BAPIBTSEL ,
<br> LT_CAMPAIGN_ASGN TYPE TABLE OF BAPISDCA ,
<br> LT_CONDITIONS_KONV_EX TYPE TABLE OF KONV .
<br>
<br> DATA: LV_SALESDOCUMENT_EX TYPE BAPIVBELN-VBELN,
<br> LT_SALES_HEADER_OUT TYPE BAPISDHD,
<br> LT_SALES_HEADER_STATUS TYPE BAPISDHDST.
<br>
<br> DATA: LV_VALUE_SALESDOCUMENT TYPE BAPIVBELN-VBELN,
<br> LT_SALES_HEADER_IN TYPE BAPISDHD1,
<br> LT_SALES_HEADER_INX TYPE TABLE OF BAPISDHD1X,
<br> LT_SENDER TYPE TABLE OF BDI_LOGSYS,
<br> LV_BINARY_RELATIONSHIPTYPE TYPE BRELTYP-RELTYPE,
<br> LV_INT_NUMBER_ASSIGNMENT TYPE BAPIFLAG-BAPIFLAG VALUE 'R',
<br> LV_BEHAVE_WHEN_ERROR TYPE BAPIFLAG-BAPIFLAG VALUE ' ',
<br> LT_LOGIC_SWITCH TYPE TABLE OF BAPISDLS,
<br> LV_BUSINESS_OBJECT TYPE BAPIUSW01-OBJTYPE VALUE ' ',
<br> LT_TESTRUN TYPE TABLE OF BAPIFLAG-BAPIFLAG ,
<br> LV_CONVERT_PARVW_AUART TYPE BAPIFLAG-BAPIFLAG VALUE ' ',
<br> LV_STATUS_BUFFER_REFRESH TYPE BAPIFLAG-BAPIFLAG VALUE 'X',
<br> LV_CALL_ACTIVE TYPE CHAR4.
<br>
<br> DATA: WA_SALES_PARTNERS LIKE LINE OF LT_SALES_PARTNERS,
<br> WA_SALES_SCHEDULES_IN LIKE LINE OF LT_SALES_SCHEDULES_IN,
<br> WA_SALES_CONDITIONS_IN LIKE LINE OF LT_SALES_CONDITIONS_IN,
<br> WA_EXTENSIONIN LIKE LINE OF LT_EXTENSIONIN,
<br> WA_SALES_ITEMS_IN LIKE LINE OF LT_SALES_ITEMS_IN,
<br> WA_SALES_TEXT LIKE LINE OF LT_SALES_TEXT.
<br>
<br> LT_SALES_HEADER_IN-DOC_TYPE = 'ZSAL'.
<br> LT_SALES_HEADER_IN-SALES_ORG = '1000'.
<br> LT_SALES_HEADER_IN-DISTR_CHAN = '02'.
<br> LT_SALES_HEADER_IN-DIVISION = '01'.
<br> LT_SALES_HEADER_IN-PMNTTRMS = 'Z020'.
<br> LT_SALES_HEADER_IN-DUN_COUNT = '0'.
<br> LT_SALES_HEADER_IN-ADD_VAL_DY = '00'.
<br> LT_SALES_HEADER_IN-EXCHG_RATE = '0'.
<br> LT_SALES_HEADER_IN-BILL_DATE = SY-DATUM.
<br>
<br>data lv_kunnr type kunnr value '106475'.
<br>
<br>CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
<br> EXPORTING
<br> INPUT = lv_kunnr
<br> IMPORTING
<br> OUTPUT = lv_kunnr.
<br>
<br> WA_SALES_PARTNERS-PARTN_ROLE = 'AG'.
<br> WA_SALES_PARTNERS-PARTN_NUMB = lv_kunnr.
<br> APPEND WA_SALES_PARTNERS TO LT_SALES_PARTNERS.
<br>
<br> WA_SALES_PARTNERS-PARTN_ROLE = 'WE'.
<br> WA_SALES_PARTNERS-PARTN_NUMB = lv_kunnr.
<br> APPEND WA_SALES_PARTNERS TO LT_SALES_PARTNERS.
<br>
<br> WA_SALES_TEXT-ITM_NUMBER = '000010'.
<br> WA_SALES_TEXT-TEXT_ID = 'ZS01'.
<br> WA_SALES_TEXT-LANGU = SY-LANGU.
<br> APPEND WA_SALES_TEXT TO LT_SALES_TEXT.
<br>
<br> WA_SALES_TEXT-ITM_NUMBER = '000010'.
<br> WA_SALES_TEXT-TEXT_ID = '3010'.
<br> WA_SALES_TEXT-LANGU = SY-LANGU.
<br> APPEND WA_SALES_TEXT TO LT_SALES_TEXT.
<br>
<br> WA_SALES_SCHEDULES_IN-ITM_NUMBER = '000010'.
<br> WA_SALES_SCHEDULES_IN-REQ_QTY = '22'.
<br> APPEND WA_SALES_SCHEDULES_IN TO LT_SALES_SCHEDULES_IN.
<br>
<br> WA_SALES_CONDITIONS_IN-ITM_NUMBER = '000010'.
<br> WA_SALES_CONDITIONS_IN-COND_TYPE = 'ZMAN'.
<br> WA_SALES_CONDITIONS_IN-CURRENCY = 'NOK' .
<br> APPEND WA_SALES_CONDITIONS_IN TO LT_SALES_CONDITIONS_IN.
<br>
<br> WA_EXTENSIONIN-STRUCTURE = 'BAPE_VBAK'.
<br> * WA_EXTENSIONIN-VALUEPART1 = '090000000200'.
<br> APPEND WA_EXTENSIONIN TO LT_EXTENSIONIN.
<br>
<br>data lv_MATNR type MATNR value '000000000000000031'.
<br>
<br>CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
<br> EXPORTING
<br> INPUT = lv_MATNR
<br> IMPORTING
<br> OUTPUT = lv_MATNR.
<br>
<br> WA_SALES_ITEMS_IN-ITM_NUMBER = '10'.
<br> WA_SALES_ITEMS_IN-MATERIAL = lv_MATNR.
<br> WA_SALES_ITEMS_IN-TARGET_QTY = '1'.
<br> WA_SALES_ITEMS_IN-TARGET_QU = 'ST'.
<br> WA_SALES_ITEMS_IN-SHORT_TEXT = 'TESST AJ'.
<br> WA_SALES_ITEMS_IN-SALES_UNIT = 'ST'.
<br> WA_SALES_ITEMS_IN-CURRENCY = 'NOK'.
<br> WA_SALES_ITEMS_IN-WBS_ELEM = '011215'.
<br> APPEND WA_SALES_ITEMS_IN TO LT_SALES_ITEMS_IN.
<br>
<br> DATA : WA_ORDER_ITEMS_INX TYPE BAPISDITMX.
<br> DATA : LT_ORDER_ITEMS_INXN TYPE STANDARD TABLE OF BAPISDITMX.
<br> DATA : WA_ORDER_HEADER_INX TYPE BAPISDHD1X.
<br> DATA : LT_ORDER_HEADER_INXN TYPE STANDARD TABLE OF BAPISDHD1X.
<br>
<br> WA_ORDER_ITEMS_INX-UPDATEFLAG = ' '.
<br> WA_ORDER_ITEMS_INX-ITM_NUMBER = '000010'.
<br> WA_ORDER_ITEMS_INX-MATERIAL = 'X'.
<br> WA_ORDER_ITEMS_INX-TARGET_QTY = 'X'.
<br> WA_ORDER_ITEMS_INX-TARGET_QU = 'X'.
<br> WA_ORDER_ITEMS_INX-SHORT_TEXT = 'X'.
<br> WA_ORDER_ITEMS_INX-SALES_UNIT = 'X'.
<br> WA_ORDER_ITEMS_INX-WBS_ELEM = 'X'.
<br>
<br> APPEND WA_ORDER_ITEMS_INX TO LT_ORDER_ITEMS_INXN.
<br>
<br> CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
<br> EXPORTING
<br> SALESDOCUMENT = LV_VALUE_SALESDOCUMENT
<br> SALES_HEADER_IN = LT_SALES_HEADER_IN
<br>* SALES_HEADER_INX =
<br>* SENDER =
<br>* BINARY_RELATIONSHIPTYPE = ' '
<br> INT_NUMBER_ASSIGNMENT = LV_INT_NUMBER_ASSIGNMENT
<br>* BEHAVE_WHEN_ERROR = ' '
<br>* LOGIC_SWITCH = ' '
<br> BUSINESS_OBJECT = ' '
<br>* TESTRUN =
<br>* CONVERT_PARVW_AUART = ' '
<br> STATUS_BUFFER_REFRESH = 'X'
<br>* CALL_ACTIVE = ' '
<br> IMPORTING
<br> SALESDOCUMENT_EX = LV_SALESDOCUMENT_EX
<br> SALES_HEADER_OUT = LT_SALES_HEADER_OUT
<br> SALES_HEADER_STATUS = LT_SALES_HEADER_STATUS
<br> TABLES
<br> RETURN = LT_RETURN
<br> SALES_ITEMS_IN = LT_SALES_ITEMS_IN
<br>* SALES_ITEMS_INX =
<br> SALES_PARTNERS = LT_SALES_PARTNERS
<br> SALES_SCHEDULES_IN = LT_SALES_SCHEDULES_IN
<br>* SALES_SCHEDULES_INX =
<br> SALES_CONDITIONS_IN = LT_SALES_CONDITIONS_IN
<br>* SALES_CONDITIONS_INX =
<br>* SALES_CFGS_REF =
<br>* SALES_CFGS_INST =
<br>* SALES_CFGS_PART_OF =
<br>* SALES_CFGS_VALUE =
<br>* SALES_CFGS_BLOB =
<br>* SALES_CFGS_VK =
<br>* SALES_CFGS_REFINST =
<br>* SALES_CCARD =
<br> SALES_TEXT = LT_SALES_TEXT
<br>* SALES_KEYS =
<br>* SALES_CONTRACT_IN =
<br>* SALES_CONTRACT_INX =
<br> EXTENSIONIN = LT_EXTENSIONIN
<br>* PARTNERADDRESSES =
<br>* SALES_SCHED_CONF_IN =
<br> ITEMS_EX = LT_ITEMS_EX
<br> SCHEDULE_EX = LT_SCHEDULE_EX
<br>* BUSINESS_EX =
<br>* INCOMPLETE_LOG =
<br> EXTENSIONEX = LT_EXTENSIONEX
<br>* CONDITIONS_EX =
<br>* PARTNERS_EX =
<br>* TEXTHEADERS_EX =
<br>* TEXTLINES_EX =
<br>* BATCH_CHARC =
<br>* CAMPAIGN_ASGN =
<br>* CONDITIONS_KONV_EX =
<br>.
<br>
<br> commit work.
<br>
<br>I am aware that there are other BAPI's available to create a new sales order(BAPI_SALESORDER_CREATEFROMDAT2 <br>etc.) but the problem with using them is they internally call the same function module 'SD_SALESDOCUMENT_CREATE'. i <br>have already tried to create the sales order using 'BAPI_SALESORDER_CREATEFROMDAT' but the effect is the same.
<br>When I pass WBS element value in VA01 and create a sales order I can see that WBS element value is coming correctly. <br>But when i create the sales order using ABAP code WBS element is coming as blank. When I execute this standard FM it <br>creates the sales order correctly with a blank against WBS element. I checked in the VBAP table the value is not even <br>populated there . Kindly share your valuable inputs for the same.
- AkshayMay be you have to post this in ABAP forum to get suitable suggestions.
G. Lakshmipathi -
Missing Standard Container Elements
Good day,
Normally, we see the following elements as template container standard elements:
AdhocObjects
AttachObjects
WfInitiator
WfPriority
WiGroup_ID
_Workitem
WfVersion
For a reason, I can not see those elements within new created templates container any more. However, I can see them in old templates.
I don't know if this is releated, but, we just changed the development client from 023 to 022. And we kept the prefix template numbering to go on wiht 923XXXXX instead of starting with 922XXXXX.Hi,
Goto EXTRAS --> OPTIONS in the TCODE SWDD(Workflow builder), here goto VIEW tab, here you have a check box for DO NOT DISPLAY SYSTEM ELEMENTS IN CONTAINER under the Miscellaneous Block. Just uncheck this checkbox if it is checked and you can see the systems elements in the container.This will solve your issue.
Thanks,
Sujatha -
Standard parameter ID not populating
Hello Gurus,
I have added a field in MM01 transaction at Costing 1 tab through SPRO.
I want that field to be visible only for one Plant.
But after entering the plant , I am unable to fetch it from its parameter ID WRK.
Please comment on how to achieve the following.
Thanks & Regards,
Roshan.Hi,
Some times the parameter ids would not work as they have not been set in the program, driving the screen if thats not woring why dont you try to read the values from the screen using FM like dynp_values_read or use the field symbols to read the values from the stack and use the same.
Regards,
Himanshu -
Container Variables Not Filled
Hi,
I have configured Alert Category and Alert Rules to trigger exceptions at Mapping, Adapter and Proxy level. All these alerts are getting triggered properly. But the container variable, &SXMS_FROM_SERVICE& is not getting populated and displays the tag as such.
I infact checked the Note 947738 (Container Element not filled). But this is for SP 09. We are in Release 7.0 SP 11. So the note is already implemented.
But still I am facing this problem. The container variables are not filled. Can someone suggest how to fix this.
Regards.
BalaHi,
Are all the other Container Variables being populated?
If yes, one option is to check note : 913858 . This note describes one question when the From Interface Container variable does not fill up. Check what it mentions.
Regards
Bhavesh -
Hi,
I'm doing a bpm scenario where i recieve a file using receive step then use a switch to check if a condition satisifies based on that I'm sending to File using send step and in other block using Mail.
Im getting error as container elements not intialized when did syntax check in bpm and also for receive step it says container element intialized but not used,,,
please tell me what needs to be done
ThanksHi,
for every abstract interface you will contanier variable and this varaible will be used in BPM Steps, this i very basic fund.
so please make sure that you have done perfectly.
Regards,
Raj -
Hiding a container element from a standard applicaition
hi,
i have a requirement to remove the UI elements in a transparent container from a view of a standard webdynpro component HRRCF_C_PREFERENCES_UI. This component is being used as a sub component in a main application.
The transparent container within has a drop down list and a few buttons.
So i created a component configuration for the component HRRCF_C_PREFERENCES_UI and changed the property of the UI element in the configuration to invisible. This worked, the container element was invisible in the application. But two other containers next to the UI element that was hidden did not move to the left . No proper alignment.
Is this the standard behavior of a component configuration? i don't think so.
Now in my option, the other only possible option is to hide the button by changing the attribute in the WDDOMODIFYVIEW method of the view.
Could someone please help me how to set the attribute problematically? Is there a different way to meet this requirement?
Need some help.Thanks.
Best Regards,
SridharanHi,
Just go to enhancement mode in your webdynpro component and delete that button from UIElement hierarcy.
If you want your button back, delete the enhancement.
Regards
Vishal kapoor
Maybe you are looking for
-
There is a major flaw in the design and use of AppleIDs and their use across the entire Apple product line. It could be fixed easily if I could "unverify" an email address that I used for a certain appleID. After over an hour talking with phone tec
-
Please god . deactivate this product. Your troubleshooters dont work, cannot deactivate. I am using RETAIL, adobe acrobat xi.Connected to internet. On for over 20 min. Open to deactivate greyed out. Windows 7 x64 pro. This crap makes people want to u
-
A Toplink Java code example in Jdev 10.1.2
Hello every body I have just begun using Toplink 10g in Jdev 10.1.2, and I want examples of Java code to insert, edit and show information from struts application whose model is Toplink. Thanks
-
HELP: I cant switch off a message in my terminal window
I am trying to get some scala coding done, but I keep getting this extremely annoying message in my terminal window: Broadcast Message from [email protected] (no tty) at 20:26 BST... Oct 5 20:26:22 jonathan-kings-MacBook-Pro-2996 kernel[0]: How do I
-
Hi Experts, My client would like the possibility to choose several reasons for an opportunity status. e.g. : Status : Won Reasons : Price Right Ressources Do you know how to do this (if it's possible) ? Thanks a lot