Standard input help in zreport selection screen
Hi All,
I am having a selection sceen like S_PERNR FOR PA0001-PERNR.
when I put f4 help then it is comming right and showing the value
of personnel number which is correct.
But when you execute the transaction PA30 and select f4 help in
personnel number then it iscomming with window and all information
is cooming. I want to put that help on my selection screnn S_PERNR FOR PA0001-PERNR.
is it possible? Please give me the solution.
Thanks,
Rakesh
Yes, i am getting input help for position in that program also in ECC 6.0 version.
SELECT-OPTIONS:pchobjid FOR pchdy-objid_seq.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-high.
rhx-f4-objid-high pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
Which version are you working ?
Note: Plz post only one question per thread.
Similar Messages
-
Input help for a selection screen field
I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF. -
I need some help on a selection screen. I have the following:
SELECTION-SCREEN: BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
PARAMETERS: p_bldat TYPE bkpf-bldat OBLIGATORY DEFAULT sy-datum,
p_budat TYPE bkpf-budat OBLIGATORY DEFAULT sy-datum,
p_xref1 TYPE proj-pspid OBLIGATORY,
p_bktxt TYPE bkpf-bktxt,
p_bukrs TYPE bkpf-bukrs OBLIGATORY DEFAULT '1100',
p_waers TYPE bkpf-waers OBLIGATORY DEFAULT 'USD'.
SELECTION-SCREEN: END OF BLOCK a1.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS: p_lifnr TYPE ekko-lifnr OBLIGATORY,
p_ebeln TYPE ekko-ebeln OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK b1.
SELECTION-SCREEN: BEGIN OF BLOCK c1 WITH FRAME TITLE text-003.
PARAMETERS: p_amt TYPE wrbtr,
p_ret TYPE wrbtr.
SELECTION-SCREEN: END OF BLOCK c1.
SELECTION-SCREEN: BEGIN OF BLOCK d1 WITH FRAME TITLE text-004.
PARAMETERS: p_cmode TYPE callmode DEFAULT 'N' OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK d1.
AT SELECTION-SCREEN ON p_ebeln.
SELECT SINGLE kwert INTO p_ret FROM zretention WHERE ebeln = p_ebeln AND ebelp = '00000' AND TYPE = 'C'.
IF NOT sy-subrc = 0 OR p_ret IS INITIAL.
CONCATENATE 'Purchase Order' p_ebeln 'does not have any retention available for release!' INTO d_string.
MESSAGE d_string TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN.
check p_ret is not INITIAL.
IF p_amt > p_ret.
MESSAGE 'Amt. To Be Released is more than the remaining retention. Please check your input.' TYPE 'E'.
ELSEIF p_amt IS INITIAL.
MESSAGE 'Amt. To Be Released is required. Please check your input.' TYPE 'E'.
ENDIF.
What I want is for the parameter p_ret to be populated when the user inputs a PO (p_ebeln). This seems to work except I want this to be brought in without running through the other checks (AT SELECTION-SCREEN). In order to bring in p_ret I am having to hit ENTER which will trigger the event AT SELECTION-SCREEN.
How can I bring in p_ret without triggering the event AT SELECTION-SCREEN?
Regards,
DavisIn this case.
If you don't want at selection-screen to be triggered on hitting enter, you can give an if condition in at selection-screen.
tables : sscrfields.
AT SELECTION-SCREEN ON p_ebeln.
SELECT SINGLE kwert INTO p_ret FROM zretention WHERE ebeln = p_ebeln AND ebelp = '00000' AND TYPE = 'C'.
IF NOT sy-subrc = 0 OR p_ret IS INITIAL.
CONCATENATE 'Purchase Order' p_ebeln 'does not have any retention available for release!' INTO d_string.
clear sscrfield-ucomm.
MESSAGE d_string TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN.
if sscrfields-ucomm = 'ONLI'.
check p_ret is not INITIAL.
IF p_amt > p_ret.
MESSAGE 'Amt. To Be Released is more than the remaining retention. Please check your input.' TYPE 'E'.
ELSEIF p_amt IS INITIAL.
MESSAGE 'Amt. To Be Released is required. Please check your input.' TYPE 'E'.
ENDIF.
endif.
The code in at selection-screen is executed only when user presses F8. on pressing 'Enter' it will not be executed.
Hope this helps you.
Regards,
Siddarth -
Error in search help button at selection-screen
hi all,
i have a small issue.
i have created a seach help button in selection screen .
my code is as bellow.
TYPES: BEGIN OF ty_ZSD_SNID,
KUNNR TYPE KUNNR,
BAREA TYPE WERKS_D,
END OF ty_ZSD_SNID.
DATA : it_z TYPE STANDARD TABLE OF ty_ZSD_SNID.
selection-screen : begin of block b with frame title text-000.
select-options : skunnr for zsd_snid-kunnr.
parameters : pbarea like zsd_snid-barea obligatory.
selection-screen : end of block b.
INITIALIZATION.
SELECT KUNNR BAREA FROM ZSD_SNID INTO TABLE it_z.
SORT it_z BY BAREA KUNNR.
DELETE ADJACENT DUPLICATES FROM it_z COMPARING BAREA KUNNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SKUNNR-low.
IF it_z[] IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'KUNNR' " data base table field name
PVALKEY = ' '
dynpprog = sy-repid " program name
dynpnr = sy-dynnr "screen name
dynprofield = 'SKUNNR-LOW' " layot field name
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = it_z[] " internal talble name
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
MESSAGE E000(zsdsn).
ENDIF.
my issue is , its working properly if records are there in my z table.
if no records are there in the table then if i do comment the last message statement then its working.
if i do uncomment like the above code, then its dumming.
what i should i do ??
kind regardsclosed because of no answer.
-
Add input parameters to ik07 selection screen..enhancement spots
hello experts,
Help required..
Please tell me how to enhance the tcode ik07 for putting the input parameters on the selection screen I think there are no badi and exits we have to use enhancement spot.
How can i... Please reply...screenshot for referenceSince i am adding a select option of type ekko-ebeln, i have to add a statement TABLE ekko.
-
F4 Help for the selection screen field
Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'CODE'
dynpprog = lw_repid
dynpnr = sy-dynnr
VALUE_ORG = 'S'
TABLES
value_tab = gi_text
field_tab = li_fields_tab
return_tab = pi_return_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001 test
001 test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
field LIKE e070-trkorr,
text LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
p_text LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu = 'E'.
t_fldtab-position = 1.
t_fldtab-offset = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext = 'Key'.
t_fldtab-leng = 20.
t_fldtab-intlen = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype = 'C'.
t_fldtab-headlen = 20.
t_fldtab-keyflag = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext = 'Text'.
t_fldtab-leng = 60.
t_fldtab-intlen = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen = 60.
t_fldtab-keyflag = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'FIELD'
dynpprog = 'ZKTEST01'
dynpnr = '1000'
dynprofield = 'P_FIELD'
value_org = 'S'
TABLES
field_tab = t_fldtab
value_tab = value_tab
return_tab = t_rettab
dynpfld_mapping = t_dynmap
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi -
Standard Input Help on a table column.
Hello,
Requirement is to provide a Standard Input Help on a Table Column in Web UI. The Context node is a Value node and that column should be in editable mode.
And how can I get standard search in Web UI that is available in GUI for searching the Transaction No. in T- Code CRMD_ORDER.
Pl. help.
Thanks & Regards
AnkitHi Ankit,
If you are asking about DDIC search help, then you need to use method GETV_XYZ of the context node attribute.
Have a look on below written code:
data:
ls_map type IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING,
lt_inmap type IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB,
lt_outmap type IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB.
ls_map-context_attr = 'struct.countryorigin'.
ls_map-f4_attr = 'LAND1'. ( Search help Parameter, in your case it will be Transcation no.)
append ls_map to: lt_inmap, lt_outmap.
create object rv_valuehelp_descriptor type
CL_BSP_WD_VALUEHELP_F4DESCR
exporting
iv_help_id = 'H_T005_LAND'
iv_help_id_kind = IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_NAME
iv_input_mapping = lt_inmap
iv_output_mapping = lt_outmap.
Regards,
Saurabh -
How to provide F4 help in a selection screen
Hi..
How to provide F4 help in a selection screen for a particular field using
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'.
Thanks in Advance.
Regards
Raj KumarAT SELECTION SCREEN
at selection-screen on value-request for s_contr-low.
Get contract (low value)
perform get_contract changing s_contr-low.
form get_contract changing p_contr .
types: begin of ty_ycontract,
ycontract type xchcontract-ycontract,
lifnr type xchcontract-lifnr,
ycontdate type xchcontract-ycontdate,
ycont_end_dt type xchcontract-ycont_end_dt ,
end of ty_ycontract.
data: ds_returntab type ddshretval,
dt_returntab type table of ddshretval,
dl_fieldname type dfies-fieldname.
data: dt_ycontract type table of ty_ycontract.
select ycontract lifnr ycontdate ycont_end_dt
from xchcontract
into table dt_ycontract.
if sy-subrc = 0.
clear dl_fieldname.
dl_fieldname = 'YCONTRACT'.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = dl_fieldname
value_org = 'S'
tables
value_tab = dt_ycontract
return_tab = dt_returntab
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
clear ds_returntab.
read table dt_returntab into ds_returntab index 1.
if sy-subrc = 0.
p_contr = ds_returntab-fieldval.
endif.
endif.
endif.
endform. -
F4 help in the selection screen from a int table
I collected the datas from the function module. and the internal table is populated.
the internal table contains manny fields.
among these fields i need to take only one field and this field value to be used for F4 help in the selection screen ( not a dynpro)
for example : in the selection screen
I have to select the PO.
based on the user i have filtered the PO. (determined dynamically by using the user name this i have done it)
then i have to assign the PO the selection screen.
which FM will be better to use for this type of scenario and help me out with some example codes particularly for my req
ThanksHi ,
use the FM 'F4IF_INT_TABLE_VALUE_REQUEST'
This example is for search help for material type .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_mtart-low .
select all material types you want to display in search help into table i_mtart.
PERFORM select_material_type.
PERFORM help_material_type.
*& Form help_material_type
text
--> p1 text
<-- p2 text
FORM help_material_type .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'MTART'
PVALKEY = ' '
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'S_MTART-LOW'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = i_mtart
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " help_material_type
Regards,
Balaji. -
How to link a search help to a selection screen field
Hi All,
I am using field PKWRG from PA0017 table in selection screen. I need F4 help there as in Tcode PA30 . But this field does not have value table or check table. However, it has a search help attached 'TRV_PKWRG' .
But, I donot know how to assign a search help to a selection screen field. Please help.
Regards,
NibhaHello,
Fetch all the data which from the table which you want to show in the search help and pass the value to the FM
F4IF_INT_TABLE_VALUE_REQUEST and the selection-screen event must be
at selection-screen on value request parameter or selection option variable.
BCALV_TEST_FULLSCREEN
BCALV_TEST_FULLSCREEN_CALLS
BCALV_TEST_FULLSCREEN_PRINT
BCALV_TEST_FULLSCREEN_STATUS
BCALV_TEST_GRID
BCALV_TEST_GRID_DRAG_DROP
BCALV_TEST_GRID_EDITABLE
BCALV_TEST_GRID_EVENTS
BCALV_TEST_GRID_INDEX
BCALV_TEST_GRID_TOOLBAR
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_LIST
BCALV_TEST_LIST_PRINT
BCALV_TEST_LIST_STATUS
BCALV_VERIFY_DTYPES_D0100_F01
BCSMENUF01
BDLCOF10
BDLDVI10
BDLTREDF -
Can we create serach help for a selection screen field
Can we create serach help for a selection screen field with out creating searchhelp object.
I mean is it possible to create serchelp in the program itself with some specific values i want to give.
E.g say we can define any internal table and fill it with values and using that into selection screen fields
Regards
MaveAT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
PERFORM PAYMENT_HELP.
FORM PAYMENT_HELP.
DATA: begin of DESCR_TAB occurs 0,
DESCR LIKE BKPF-BKTXT,
END OF DESCR_TAB.
DATA: gd_repid like sy-repid.
gd_repid = sy-repid.
DESCR_TAB-DESCR = 'aaaaa'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'bbbbb'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'ccccc'.
append DESCR_TAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'DESCR'
DYNPPROG = gd_repid
DYNPNR = '1000'
DYNPROFIELD = 'paymeth'
VALUE_ORG = 'S'
DISPLAY = ' '
TABLES
value_tab = DESCR_TAB.
endform.
Svetlin -
F4 Help in BSP for a input field in the Selection Screen...Urgent
Hi ,
Can anyone possible tell me how to put F4 help in a BSP
Regards...Hi Pavan,
It's a reccurring question in BSP forum that cannot be solved that easily...
You will find some examples of how it can be handled in demo BSP :
<b>bsp_valuehelp</b>
<b>bsp_vhelp</b> (this one is MVC-oriented)
To go further, you should have a look at the following blog :
/people/thomas.jung3/blog/2004/09/17/bsp-150-a-developer146s-journal-part-xii-150-value-input-help-popups
/people/thomas.jung3/blog/2004/11/01/bsp-value-input-help-popups-version-20-part-1
Hope it helps.
Best regards,
Guillaume -
How to capture the user change in an input field on a selection screen?
I am coding a selection screen in which there are two input fields. The first field takes a Unix directory from the user input. Based on the input value, the second field will be populated with a the name of a file under the corresponding directory.
My question is how I can make the program capture the user input without having to make the user press ENTER after they enter the value in the first field?
Any help will be greatly appreciated.Venkat,
Actually you led me to the real solution! It's the function module DYNP_VALUES_READ that does the trick for me. This function enables the program to capture dynamic user changes without recourse to PAI. Please refer to the code below:
REPORT zreiabsintf MESSAGE-ID zreiabsintfmc.
*<HGDC------------------------------------------------------------------
* Selection screen for the conversion program
*HGDC>------------------------------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-001.
PARAMETERS: p_indir LIKE epsf-epsdirnam OBLIGATORY, " Inbound file directory
p_infile LIKE epsf-epsfilnam DEFAULT gc_infile OBLIGATORY, " Inbound file name
SELECTION-SCREEN END OF BLOCK input.
*<HGDC------------------------------------------------------------------
* Displays a file-open dialog when the user clicks the search
* help button next to the inbound file text field. The user
* can select the inbound file visually.
*HGDC>------------------------------------------------------------------
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_infile.
* Capture any user change to the directory.
PERFORM check_dir_change.
* Display the file open dialog
PERFORM file_open_dialog CHANGING p_infile.
*<HGDC------------------------------------------------------------------
* Global constants
*HGDC>------------------------------------------------------------------
CONSTANTS:
gc_indir LIKE epsf-epsdirnam
VALUE '/interfaces/<SID>/inbound/', " Default inbound directory template
gc_infile LIKE epsf-epsfilnam VALUE 'input'. " Default inbound file name
*<HGDC------------------------------------------------------------------
* Global data
*HGDC>------------------------------------------------------------------
DATA:
gs_dynpfields TYPE dynpread, " Fields of the current screen
gt_dynpfields LIKE STANDARD TABLE OF gs_dynpfields. " Table of the screen fields
*& Form file_open_dialog
* Opens a dialog window for the user to choose a file in
* the specified Unix directory.
* <--P_FILE is the file to be selected.
FORM file_open_dialog CHANGING p_file.
* Validate the directory.
OPEN DATASET p_indir FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
MESSAGE i001(zreiabsintfmc) WITH p_indir. " Unable to open the given directory
EXIT.
ENDIF.
CLOSE DATASET p_indir.
* Call the dialog window to open a file in the directory.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
EXPORTING
directory = p_indir
IMPORTING
serverfile = p_file
EXCEPTIONS
canceled_by_user = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE i002(zreiabsintfmc). " Failed to open the file.
EXIT.
ENDIF.
ENDFORM. " file_open_dialog
*& Form check_dir_change
* text
* --> p1 text
* <-- p2 text
FORM check_dir_change .
CLEAR gs_dynpfields.
CLEAR gt_dynpfields.
gs_dynpfields-fieldname = 'P_INDIR'.
gs_dynpfields-fieldvalue = p_indir.
APPEND gs_dynpfields TO gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = gt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_dynpfields INTO gs_dynpfields INDEX 1.
p_indir = gs_dynpfields-fieldvalue.
ENDFORM. " check_dir_change
Thanks for all your answers! The problem is now solved.
Edited by: Ning Hu on Apr 9, 2008 11:32 AM
Edited by: Ning Hu on Apr 9, 2008 11:34 AM -
Input box on default selection screen
Hi,
how to create an input box on the default selection screen which will accept only 1275 characters.
Can u please help me?
Thanks in Advance,
Sreekala.Hi Sreekala,
You need to use the CL_GUI_TEXTEDIT for creating the box, also you need use the dialog program for that.
For more info on that class check this
Usage of CL_GUI_TEXTEDIT
Text box on selection screen
Hope they helps you.
Regards! -
F4 help for the selection screen field designed in screen painter
Hi all,
I have designed selection screen in the screen painter. in that for one of the fields i have to give f4 help. for that i have writter the code in PAI event. in this event i have used the standard Function module for f4 help. but no f4 help is comming for that field. can any body suggest what i have to do.
Thanks & Regards,
Giri.Hi,
You must use the correct event to meet ur requirement use POV event instead of PAI event.
for more clarification and example program see below the demo program
DEMO_DYNPRO_F4_HELP_DYNPRO
DEMO_DYNPRO_F4_HELP_MODULE
Cheers
fareed
Maybe you are looking for
-
Purpose of using wild cards in SAP-ABAP
what is the purpose of using the following in ABAP programs. In my case these naming convention are used in Reports * (Custom Programs) 1> tables: *nast. why we use * before the table name? 2> Data: %var1 type mara-matnr, What for this % is used to
-
Getting the same text more than once
I keep getting the same numerous texts more than once from my friends and one of my friends even said that they were getting my texts out of order. Is it my phone or the network?
-
"empty file" error in Mail from PDF attachments created on a PC
Hi all, We have an odd situation where a particular PC user seems to be unable to send MacMail-compatible .pdf files. When she sends the files, Mail gives the following error upon trying to open them: "The file xxxxx could not be opened because it is
-
Flash movie not loading in IE 8....??
Hi, ive made a flash site in Flash CS4 .The flash movie doesnt load either on my computer or on web server, but only in IE 8 ??, in all other browsers(FF,Safari,opera) it works???? Why does this happen? This is the page http:/
-
How to set up windows 8 to print to printer that is attached to an airport extreme?
Hello, Please advise what is the best way to setup my daughters new windows 8 desktop to print to a printer attached to an airport extreme. I used Bonquir to add the printer but nothing happens when I print something. It does not even register in the