Standard Program Name for updating the System-Variables everyday in BACKGRO

Hi All,
Can anybody tell me the Standard Program Name for updating the System-Variables everyday in BACKGROUND job?

Hello matt,
I have a program with variant.
This VARIANT input values will store in TVARVC table every day night background job.
i want the program name

Similar Messages

Standard program name for PO smartform in Ecc 6.0 onwards

Hi,
Could anyone please help me to know the program name for PO smartform in ECC 6.0 version onwards.i know about /SMB40/FM06P but this program is not there in Ecc 6.0.
Plesea help me.
Thanks,
Sandeep.

Hi Sandeep,
The Driver program for the SapScript MEDRUCK is SAPFM06P.
Thanks,
Anon

Problem in picking the system variable value in Calculation Script

Hi All,
We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
Now I am using this system variable in the calculation script as below:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportOverwriteFile ON;
Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
DATAEXPORT "File" " " $DEXPORTPATH;
ENDFIX
Here "DEXPORTPATH" is the system variable
I am creating this system variable from the batch script and the system variable value varies at the runtime.
This calculation script works fine for first time and it picks the correct value from the system variable.
But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
The calc script works fine with this.
For next execution, system variable value is changed to "D:\Time\temp.txt"
Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
and performs execution which is wrong.
Please help me on this issue how to handle system variables in calc scripts.
Thanks in advance
Regards
Swathi

811829 wrote:
Hi All,
We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
Now I am using this system variable in the calculation script as below:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportOverwriteFile ON;
Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
DATAEXPORT "File" " " $DEXPORTPATH;
ENDFIX
Here "DEXPORTPATH" is the system variable
I am creating this system variable from the batch script and the system variable value varies at the runtime.
This calculation script works fine for first time and it picks the correct value from the system variable.
But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
The calc script works fine with this.
For next execution, system variable value is changed to "D:\Time\temp.txt"
Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
and performs execution which is wrong.
Please help me on this issue how to handle system variables in calc scripts.
Thanks in advance
Regards
SwathiAs of my knowledge system variables will not update immediately...you need to log off the session after changing the value.
Update the system variable..
Log off from the session..
And Re-login with the same username ....and check...
Regards,
Prabhas

Standard program names

hi,
what are the standard program names for
Vendor master
customer master
material master
purchase order
purchase requestion
sales order
delivery note
billing.
please send me the details.
thank u in advance

Hi,
You can find out the details of the program from the transaction codes. Just go to SE93 and see the details of the transaction. However, I am not sure what are you going to do with the same.
Vendor master XK01
customer master XD01
material master MM01
purchase order ME21n
purchase requestion Me51n
sales order VA01
delivery note VL01n
billing VF01
<b>You have not closed your previous threads, please mark all the helpful answers and close all your threads.</b>
Regards,
Ravi

Print program name for the dunning form F150_FR_DUNN_01 in sapscript

Hi,
I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
Kindly help me.
Thanking you.
Pujarini Patra

Hi,
Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP 0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
The corresponding SAP sample Forms are:
- F150_DUNN_SF for Smartform; and
- F150_DUNN_SF for pdf Form (don't let the name confuse you )
I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
- FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
- FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for view Cluster VC_T047_F... That would save the whole effort to try to detect the type for form assigned...
Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
The selected entry is the one you are looking for to assing your custom forms, I believe.
cheers
Janis

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Find the program which retrive the program name for 2 years.

Hi Team,
i have requirement like , i am working on BRITVIC Client , they want to me write a program which has retrive the all development Z program name for last 2 years.
could you please suggest me the standard program which has retrived all program name for last 2 years.
Thanks in Advance.
puneet.

Hi,
go to table EUDB - Development Environment Objects
see the program name NAME as putting Z*
where DATUM is the creation date
ZEIT is the creation time
also you can go for table REPOSRC - Report Source Code
Arunima
Edited by: Arunima Rudra on Nov 18, 2008 3:44 PM

Standard smartform name and standard print program name for Sales Quotation

Hi,
I would like to know the standard smartform name and standard print program name which can be used for sales quotation through transaction VA23.
For eg: The standard output type for billing document (For T code VF03) is RD00 and it' smartform name is LB_BIL_INVOICE. It's print program name is RLB_INVOICE.
Similarly, I would like to know the standard smartform name and standard print program name for AN00 output type which is used for sales quotation. .
Regards,
Zahid

Hello
std driver prgram is /SMB40/RVADOR01
form entry is ENTRY
std smartforms is /SMB40/SDQUO_A an du can check this the in NACE tcode.
Output Type     AN00          Quotation
Application     V1            Sales
   Program                   /SMB40/RVADOR01
   Form Routine              ENTRY
   Form                      RVORDER01
   PDF/Smartform Form        /SMB40/SDQUO_A
Thank u,
santhosh

What is the system variable to find the name of the current window in S.F

hi
what is the system variable to find the name of the current window in S.F

Hi ,
SFSY_PAGEWINDOW
regards,
Prashant

The system variables in java, NEEDED ONLY at CLI execution of java programs

The system variables in java, NEEDED ONLY at CLI execution of java programs, and NOT needed at all[essentially] if I install bundle(14+6.7)?
if I install bundle(14+6.7) to run-test a web app with netbeans 6.7 what I must press, then opens the default browser? I have to be online,...? How I test browse my project?

Probably a complete tutorial on all possible environment variables in addition to a tutorial on netbeans configuration.

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are n

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are none available. How can I update my system to ver 10.8 or newer to accommodate the new banking app?

You can update directly to Yosemite (for free) through the App Store (this is 10.10). Make sure your existing applications will run on this OS.
If you wish to stay at 10.8, you can order this through the online Apple Store (it's $20), and they will email you a redemption code to be used on the App Store.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Matt

Program name for fill up setup table vistex agreement datasources

Dear all,
Am using the Vistex agreement data source in which i want to retrieve the data into BI landscape.
For my concern i have seen one article,
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30a25b51-c5e8-2c10-d485-de4c69a78728
i can able to see in se38 we need to run program to fill up the set up table ,for different different extractors which is mentioned in the above articles.
but in my case am using ,
/IRM/LIS_RM_IPCRASP direct agreement condition
/IRM/LIS_RM_IPBBASP indirect agree condition
for the above mentioned two extractor wat is the program name to fill the set up table?
experts plz guide me its an urgent one,
regards
Edited by: gadhatharan thirunavukkarasu on Oct 17, 2011 2:35 PM

hi ,
this OSS notes belongs to ,use any standard SAP
BW objects from BI content for Vistex application
i dont wan to use satandard or existing bi content as per the suggestion,there is no std content is tehre for vistex application
am going customizes all upto Data target level
when i replicating the vistex datasources and try to cativate the system proposing error mesge,
The DataSource /IRM/LIS_RM_IPBBASP(D10CLNT730) does not exist in object version A
even the activation button is not highlighting
plz provide me solution its an urgent one,

Creation of function module for updating the ztable

Hi,
I am sending the requirement for ceation of function module for updating the ztable.
Requirement----
Table Updation rule (New record)
While creating a new record the calling function will export the following to the table handling function.
Table field     Probable Values
ZORDERNO------->     Sales Delivery no in case of sales orderShipment no in case of transfer order
UNAME----
>     User ID
ZORDTYPE----
>     SALEOR in case of sales orderTRANSF in case of transfer order
ZREFDOCNO----
>Sales Order no in case of sales orderPurchase Order no in case of transfer order
ZREFDOCNO1----
>Delivery no in case of transfer order
The table handling function will calculate the following fields
Table field     Probable Values
ZREQNO----
>Running serial number (incremented by 1 for each new record)
ZREQDAT     -
>System date
ZREQTIME----
>     System time
ZSTATUS----
>OPEN (for all new records)
Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
Table Updation rule (Status Update)
While updating a record the calling function will export the following to the table handling function.
Table field     Probable Values
ZORDERNO----
>Sales order no in case of sales orderShipment no in case of transfer order
ZSTATUS----
>CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
The table handling function will calculate the following fields
Table field     Probable Values
ZSTATDAT----
>System date
ZSTATTIME----
>     System time

Do you have to create/update new record in Ztable through Function Module ?
or you need to write FM only for validation?
Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
Let me know clearly what exactly u need ?
Regards,
Kiran

Fetch Report Program names for a given Package

Hi,
I need to fetch all the report program names for a given pakage. I tired TADIR table but couldnt fetch report details alone..
thanks,
sri
Moderator message: very basic, please do more own research before asking, e.g. look at a few TADIR entries of different object types, also discover the repository information system.
Edited by: Thomas Zloch on Feb 23, 2011 2:56 PM

Dan is right to be cautious, i've seen this cause problems.
It's not very difficult to make the chnages in BCS, and if you have a lot of them/frequent changes, you can always use create an upload method
and then make all future changes by .txt file

Standard form name for QM01 and QM02 ?

Hi,
Can someone tell me the standard form form name (print program) for transaction QM01 ?
How do I find standard form name for any transaction ?
Prompt replies will be awarded.
Tushar.

QM_NOTIF_OVERVW1

Standard Program Name for updating the System-Variables everyday in BACKGRO

Similar Messages

Maybe you are looking for