Standard report for User defined feild in order operation

Hi all,
do we have any standard report? for User defined field in order operation. actually we have User defined field in task list and same could be reflected in order operation. so i am using those user defied field to record extra info in maintenance order.  i am wondering how to get the reports . do we have any standard reports?
thanks
Amit kushwaha

Dear Amit
I have utilised 3 user fields & activated order enhancement tab. I could find these three fields in report IW37N & IW49N. I m using ECC 6.0 EHP4. Try to set the layout & look for  fields - user field for quantity in the layout. For this please maintain some data in these user fields of some orders and then check for those orders in t code- IW37N & IW49n.
Shakti

Similar Messages

  • Standard Report for missing parts at production order operation level?

    Hi PP Gurus,
                We have standard report for missing parts at production orders level.
    For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
    Please help.
    Thanks,
    Reddy.

    Hi Arvind,
          Thanks for for your response.
    1. List: Components,  Layout: Standard layout          set the Missing part
           It shows the component requirement/withdrawn  quantity for each operation of production order. It is not showing the commit quantity.
    2. List: Components,  Layout: Pick list          set the Missing part
           It shows the component requirement/withdrawn  quantity for each production order.
    3. List: Components,  Layout: Missing Parts List-Material View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
    4. List: Components,  Layout: Missing Parts List-Order View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
          We are unable to get the solution from all these 1 to 4 reports from COOIS.
    Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
    If avilable, what is the procedure to be followed?
    Thanks,
    Reddy.

  • SAP standard report for Purchase requisition against Purchasing order

    Hi all,
    Is anyone aware of any report in R/3 which gives a report similar to this order?
    <b>PR No.       Item No.       PO No.       Vendor Name      Vendor No.       Unit Price      Quantity.       Unit of Measurement (UOM)</b>
    Any report which has all these fields will do.
    Thanks and warm Regards
    Veena

    Hi Veena,
    In R/3 you can use ME58 or ME59.
    Hope it helps.
    Bye
    Dinesh

  • Standard report for sales history.

    hi,
        i need a standard report for sales history(all sales order ) for my company code. in va05 transaction it shows only for sales area. give the tcode .
    regards
    muthuraman.d

    Hi,
    There is no standard report for sales order list on the basis of company code.u have to develop it.
    OR
    Create report with SAP Qury
    OR
    u can us VA05N tcode >>> Speciefy sales organization from - to (all sales organizations from one company code).
    Kapil

  • Standard  report(for open PO order items) with estimated Delivery dates

    hi friends
    i would like to know if there is any standard  report(for open PO order items) with estimated Delivery dates on it.
    thanks
    alahari

    ME2M (by material)
    ME2L (by vendor)
    ME2N (by number)
    Use selection parameter WE101 for open GR
    and scope of list EINT (scheduling lines)

  • Standard report  for solve inconsistencies with user SAP.

    Dear Experts.
    We have a problem with a user(ZEST) that in the portal when I open a service(application) display a  blue Window of Internet Explorer without display information.
    We have copied this user((ZEST) TO (ZEST2 )with the same roles , however   this user  new work fine.
    My question is:
    There are a standard report  for solve inconsistencies?
    We have deleted the user and have created it of new, however this not work.

    Run the t-code SA38
    Specify the name POWL_D01
    In selection screen specify the user id in USER field of which your facing issue
    Click on Execute
    Run the T-code SA38
    Specify the name POWL_WLOAD
    In selection screen specify the user id in User input field of which your facing issue
    Click on Execute
    Now you check it issue will solve.

  • Standard report for BLOCKED SALES ORDERS

    Hey friends,
              Do any one of you know whether there is any standard report that shows the Blocked sales orders..??
    thanks in advance,
    Regards,
    Anvita.

    anvitha,
    You have the following transaction available in SAP for showing the sales documents blocked due to different reasons.
    V.14  Sales Orders Blocked for Delivery  
    V23   Sales Documents Blocked for Billing
    VA14L Sales Documents Blocked for Delivery
    VE31  Blocked SD Documents (Export related)               
    VKM1  Blocked SD Documents (Credit Blocked)               
    Check which one will satisfy your requirement.
    Thanks
    Giridhar

  • Crystal Report Templates for User-Defined Objects

    Hello Experts,
    I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
    Any help would be appreciated.
    Thanks,
    Praneeth

    If this is still a problem please re-post to the SAP Integration Kit forum.

  • SAP Standard report for Purchase order Amendments

    Hello MM Gurus,
            Kindly let me know whether any standard report available in SAP on
    Purchase order amendments.
    Regards
    Yoga

    Hi Yoga,
    You can do a small work around.
    Activate version management in PO.
    Then, you can get the list of changed POs from the transaction ME2N, by clicking on the dynamic selection icon (icon with 3 colored lines) and entering values for the "Version" field.
    You can enter multiple values there, say, 1,2,3..5, depending on the maximum number of versions that will be created.
    This selection will give you the list of amended POs.
    Regards
    sampath

  • Standard report for sales order

    HI all
    I would like to know whether there is any standard report for sending confiramtion mail to customers once the shipments are planned.
    Or atleast to track the status of sales order (to find out whether the shipment is planned) so that i can club the mail program with this.

    Hi,
    Check the following links:
    http://sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
    http://sap-img.com/abap/sending-mail-when-the-purchase-order-is-released.htm
    Regards,
    Bhaskar

  • Standard Report for Credit Balance

    Hi,
    Is there any oracle standard report for the information of credit balance??
    We use customized report for this issue now, but I prefer to use the standard report in the future.
    I created a customer with credit limit of 1000 USD, and created an order for 10 USD and then booked.
    My Credit Rule is set at booking point.
    I need an report which shows the information about : credit limit is 1000 USD, 10 USD is in used, and credit balance is 990 USD.
    I have run Credit Exposure Report and Credit Limit Usages Report, which names are alike what I want, but Credit Exposure Report just show the overall credit limit without information about how much is in used (and exposure is 0 ?? , available is the same as overall credit limit which equals to 1000 USD.), the Credit Limit Usages Report show nothing.
    So, is there any other oracle standard report for the information of credit balance??
    Thanks in advance and
    best regards,
    Zhxiang.

    Hi Zhxiang,
    Exposure is the credit usage of the customer. The credit exposure report will work based on the credit check rule. So, in your case, check what the "Booking" rule is set as. The report will consider all the elements mentioned in the rule like open orders, open AR balance etc. The values which you see in the report are exactly the same ones which are used by the credit checking engine when it does a credit check. You can get some information in the user guides also for this report.
    But this is the report which you should be looking into for knowing the credit limit, credit used and credit available details.
    Regards,
    Swapna.

  • Cost Analysis Report - For a range of process orders

    Dear all,
    Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
    Thanks
    Nagarajan

    Dear
    You can use cost analysis report like
    1.S_ALR_87099932 - Variances Between Costing Runs
    2.S_ALR_87099931 - Price vs Cost Estimate
    3.S_ALR_87099932 - Variances Between Costing Runs
    5.KOC4
    Regards
    JH

  • Standard report for the cost of raw materail in production of finished good

    Is there any standard report for calculation of raw material cost from the production order of finished goods.?
    plz help in this issue.
    Thanks.

    closed

  • I NEED TO KNOW IF IN SAP WE HAVE THESE STANDARD REPORTS FOR PP Division.

    i NEED TO KNOW IF IN SAP WE HAVE THESE STANDARD REPORTS FOR PP Division. OR I NEED TO CREATE BI/ABAP REPORTS
    PLEASE HELP.
    Please tell me how to check in sap these reports exists if not on functional report how to give fields and table name etc.............i am pretty new and i need to submit this work by monday its matter of survivial please please help
    1. lOSS ORDER REPORT as PER GAAP
    2. wWORK IN PROCESS SUMMARY (FIELDS ARE JOB NUMBER,ORDER TYPE,CUSTOMER NAME, NET SELLING PRICE,MATERIAL,MATERIAL OVERHEAD,labor hrs,labor, labor ovehead, total)
    3. 1099 REPORT (VENDOR,VENDOR CODE,DISCRIPTION AND VENDOR AMOUNT)

    If you are collecting your responses outside of Formcentral your forms will continue to work past June. This can be done by email or the Acrobat Pro mechanism. If your data is being collected in a Formscentral response table then it will cease working in July.
    Andrew

  • Value mapping, interface mapping, standard funtions and user defined functi

    I like have more information abt live scenario's use of value mapping, interface mapping, standard funtions and user defined functions.
    How to create user defined funtions and how to use it in XI?
    thanks in advance
    shiva

    Hi,
    Interface mappings register your mapping program for an interface pair in the Integration Repository. If you require a mapping at runtime, it is sufficient to select the interface mapping for the interface pair at configuration time .The Integration Server uses the interface mapping to identify associated mapping programs for request messages, response messages, fault messages, or all three.
    Features
    Executing Multiple Mapping Programs for One DirectionBy using an interface mapping you can execute multiple mapping programs consecutively for the transformation of a request or response message. In such cases, an interface mapping comprises multiple steps for which the following applies:
    &#9679;     The steps are executed in the sequence specified (from top to bottom). The result of the mapping program from the previous step is forwarded to the mapping program of the subsequent step.
    &#9679;     Each step can reference a mapping program that executes a 1:1, 1:n, n:1, or an m:n transformation. In the case of multi-mappings (1:n, n:1, or m:n), the previous step must create the same number of messages that the subsequent step expects.
    &#9679;     Multi-mappings use one envelope to put all messages in one structure. If one of the steps references a multi-mapping program, all subsequent steps must use the same envelope.
    The mapping for a request message comprises two message mapping programs: one 1:1 transformation and one 1:n transformation. Since the latter message mapping uses the multi-mapping envelope for both the target message and the source message, the message mapping for the 1:1 transformation must also create a transformation result with a multi-mapping envelope.
    You do not strictly need to divide up one direction of the whole mapping into different steps. However, this enables all the message formats in one system landscape to be mapped to a central message format, for example. This results in less mapping programs being required because you no longer need to be able to map all the different message formats to each other
    Activities
           1.      Create a message mapping on the design maintenance screen of the Integration Builder (see also: Creating an Object).
    You can also create multiple interface mappings for the same interface pair.
           2.      Enter the source and target interfaces that require a mapping of the request message, the response message, the fault message, or all three, in the table of the same name. The following restrictions apply:
    &#9675;     If you want to use the interface mapping in a transformation step in an integration process, you must only specify abstract message interfaces. Furthermore, all objects (integration process, interface mapping, and all objects that reference the interface mapping) must be in the same software component version. If you want to reference objects from underlying software component versions, you must access the objects from the Basis Objects branch (in the navigation tree or using an input help).
    &#9675;     If you want to map multiple messages to each other by using a multi-mapping, you can only specify asynchronous interfaces (for further restrictions, see: Multi-Mappings). If any message interfaces are missing, you can also create them by using the function Create New Object ().
    If the interface cannot be imported or cannot be created in the Integration Repository (in the case of an external adapter, for example), you must enter the interface names manually. However, it is not possible to check the technical name in this case.
           3.      To import the properties of the interfaces, choose Read Interfaces. The table in the lower area displays tab pages for the request message, response message, and if available, for the fault message, for each mode of the interfaces (either synchronous or asynchronous).
           4.      To develop an external mapping program, export the XSD schema of the respective request or response message as a zip file after you have imported the interfaces. The zip file can contain multiple schema files that reference each other, for example in a multi-mapping. In this case, the schema with the global message element has the name MainSchema.
           5.      To reference a mapping program for the respective message, you have the following options:
    &#9675;     Select an existing mapping program from the Integration Repository by using the input help (). If this is a message mapping, the default setting of the input help only displays those message mappings that are found using the source and target message in the Integration Repository (in multi-mappings, the first source and target messages are used as the search criteria). However, you can also display any number of message mappings, for example, because you are constructing a mapping from several mapping programs with intermediate instances which have no message types.
    &#9675;     You can create message mappings directly from the interface mapping. To do this, select the mapping type Message Mapping in the Type column. Position the cursor in the Name column and choose the function Create New Message Mapping () in the Mapping Program frame. The Integration Builder copies the specifications of the messages and their occurrence directly from the interface mapping.
    An interface mapping can only reference mapping programs that belong to the same or an underlying software component version of the interface mapping. This ensures that the mapping program can be shipped together with the interface mapping (see: Software Logistics).
           6.      If it is not a mapping for a fault message, you can execute multiple mapping programs in succession for request and response messages:
    &#9675;     To insert an additional line for a mapping program, choose .
    &#9675;     To delete the registration for a mapping program, choose .
    At runtime, the mapping programs are executed from top to bottom.
           7.      Save the interface mapping.
    Regards
    Aashish Sinha
    PS : reward points if helpful

Maybe you are looking for

  • I tried to copy my itunes library to new drive now I'm in trouble

    I bought a new 1tb internal drive and installed it. I wanted a dedicated spot for a 500 gig music library and a place for dedicated backup. The man at micro center told me in order to move the library from the 1tb lacie external drive to the new driv

  • How do I know my iPhone has been wiped?

    Hi, my iPhone got stolen last night so I went home immediately and logged into me.com/icloud to wipe it, but it's saying that the request has been sent but will only be wiped once connected to the Internet. Whoever has taken it has turned it off, but

  • Delete xml information / reference without losing structure

    Hello, I'm currently working on a project that builds catalogs. The catalogs consist of several different, linked INDD-files. Now, those INDD-files are filled up with XML data and saved. When we import them, we always get errors that there is a link

  • Define URL in CCM 2.0 catalog

    Dear Experts, In our CCM2.0 , We have define the field CCM/PICTURE  with the URL for picture of the product We would like to add a second URL for more information of the product , We have search for a field that can be set to this URL but could not f

  • Wish I didn't upgrade to iTunes 10... Having issues.

    Ok so I have over 1200 songs on my iTunes and I saw it upgraded so I figure why not... that was a mistake as it is flawed at the moment. Some of my music is in MIDI format which was working fine on the previous version. Now ALL MIDI files read as Qui