Standard Text in Smartforms using SO10 Transaction
Hi,
My requirement is i have IF Condition followed by Elseif. when ever any of above conditions satisfy i need to print a text of at least 5 lines.
If <>
Print Text upto 5 lines each line at least 100 char(text1)
elseif <>
Print Text upto 5 lines each line at least 100 char(text2).
else <>
text24.
If solution for the above is using SO10 Tcode then plz expain me in detail.
thanx in advance
Hi
Check this
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Subtotals - Check the link...
Re: Subtotal with Table Node in smartforms
Regards
Anji
Similar Messages
-
Hi..how we enter standard text for smartform using include text
hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get textHi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad -
How to use standard texts in smartforms
Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10 -
How to use a standard text in Smartform ?
hi all...
iam want to use standard text in smartform ?
can any one tell me how to do this ?
Thanks
sandyuse function module READ_TEXT to read standard text .
Regards,
Shiva Kumar -
How to add standard text in smartforms?
Hi friends,
How to add standard text in smartforms ?
points rewarded soon
Regards
RHCreating the Standard Text:
Go to SO10
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create.
And enter the Required Information and save.
To include a Standard text in SmartForm.
Follow the steps below:
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
Hope it helps.
Regards. -
hi,
I want to include one standard text in smartform how cani do itFor long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above -
Standard Texts (Tcode CA10 and SO10)
Guys,
Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=317636]
Has anyone seen any decent SAP Help documentation on standard texts (TCode CA10 and SO10)
These are the texts that are used in operations, paging and some action-box functions, etc.
PeteAKaushal Rai,
I'm looking for some comprehensive documentation relating to the use of standard texts
We are investigating the possibilities/options for use in the PM module.
PeteA -
Hi,
I tried to create a standard text in russian language.But the characters are coming as ???? . Please give me solutionHi Soumya,
I tried to create a standard text in RUSSIAN in SO10, I am not facing any problem as you mentioned. Please check whether RUSSIAN language is installed in the system and try again.
Regards,
Avi.... -
Need to use standard text in smartforms
Hi,
My requirement is like to use standard text for the address like ...
Company Name
Street, State, PIN
Phone: 111-111-1111
All the above lines should be aligned in the middle and 'Company Name' should be displayed in the bold.
1) I have created the standard text, and included statement in text window as 'INCLUDE XXXX OBJECT TEXT ID ST LANGUAGE EN' but unfortunately it was not displaying anything in the output.
2) I have tried the another method like using the 'Include Text' as a text type in the text window. It was coming but BOLD and center alignment was not coming.
Here my question is why it was not coming in 1) case and if i use READ_TEXT function module will it solve the problem ? in case 2) how can i get all the 3 lines gets center aligned and first line should be bold.
Thanks in advance for your help.Hi Jaya ,
if u wnt ur Addr first line should come in bold letter than for that
u first *** to "sap smart forms : initial screen" there is option 'STYLE' click on that radiobutton and creat ur own STYLE (Zxxx) on there u vl find al ur answer...
hope this vl help u ,
plz reward paint.
regards
wasim
Edited by: mdwasim akram on Jun 11, 2008 1:09 PM -
Standard text in Smartform Vs. SapScript.
Hello,
I am experiencing an issue regarding standard texts in forms. If we were to create the text and format it in a certain way it may display in a SapScript form correctly, but in the Smartform it will be a little off. This also happens the other way around. Has anybody found a way to resolve this so that the formatted text displays the same way in both types of forms?Thanks for your response, yes the window is wide enough. What it seems to be is mainly in the tabs of the standard text. For example...
Here is some text,,,,,,More text
some txt,,,,,,More
In a SapScript it may show:
*I am using periods because simply using spaces is ignored. Disregard the periods.
Here is some text...............................More text
some txt............................................More
where in a smartform it would show something like
Here is some text..............................More text
some txt ..............More
In these cases, the width of the window in which the text is displayed is more than adequate. If I format it so that it will display correctly in the Smartform, then it would be mis-formatted in the SapScript -
How to output a logo stored as standard text to excel using OLE
Hi Experts,
I have a requirement to write a program which creates an excel spreadsheet to download data from SAP. The client would like the spreadsheet formatted with merged cells, background colours, different size fonts and in the top left corner of the spreadsheet to show their logo.
They have similar functionality in another report, however, this requires a template (containing all of the formatting) to be stored on the user's PC. They do not want to have to do this with the new download.
After checking the many postings on this forum I have worked out how to do most of the requirements, but as yet have still not been able to work out how to populate their logo to the spreadsheet. They already have their logo stored as standard text (SO10), so would prefer to use this if possible.
Any advise and/or sample code would ge greatly appreciated.
Thanks
SandraHi Surendra,
We have the same requirement. We want to do some format changes to "Generic FSG Drill Template". I am able to do few changes. But when we run the report, we are able to see PDF, html output. But 'Exce' report comes with blank. Can you help on this. How were you able to see logo in excel file.
Can you send the suggestions if any to my mail ([email protected])
Thanks in advance.
Thanks,
Techie.
Edited by: user1138068 on May 30, 2011 7:04 AM -
Standard Text to be used as a subject/body of an email
Hi guys,
I have a program which sends a sapscript thru mail... But my problem is how am I going to make use of the standard text created in SO10 as subject and body of mail???
I used the SO_DOCUMENT_SEND_API1 FM...
Thanks a lot for all the help...
Rgds,
Markyou will need to fetch the standatd text using READ_TEXT function module
need to pass following to READ_TEXT
Text Name your text name
Language EN
Text ID ST "Standard text
Text Object TEXT "SAPscript standard te -
Deleting standard text in smartforms
HI,
i have a standard text name rule1 . first i copied this into rule2 and made the reqiured changes in rule2.
so now i want to delete rule1 and and save rule2 as rule1 again.
so can u plz tell me how to delete rule1 and save rule2 as rule1 standard text.
regards
SiriHi,
Go to So10 transaction.
Open rule1 and then Text---> delete.
Then open rule2 then text--->save text as
give the rule1 as name..
Thats all..
cheers,
Simha. -
Dynamic Standard text in SmartForms
Hi,
I have requirwemnt where I need to retrive the data from the Standard text to display.
But it variews based on SalesOrge and Comany Code u2018Zxxxx_SALES_yyyyu2019 here XXXX is SalesOrge and YYYY Company code.
How to call the standard text Dynamically in Samrtform?
Regards
IrfanHi,
For displaying standard text dynamically, just follow the following steps:
1. Create a text element and in general attributes give type as Include Text.
2. Instead of providing any static Standard text in Text Name field, you need to click on the arrow button pointing right, which is for Dynamic Field Value. There you can provide your variable as &VARIABLE&, which contains the standard text name based on the conditions.
3. Pass value statically like Text Object-TEXT, Text ID - ST , Language - EN or else you can passs them dynamically as per your requirement.
As you will be passing variables in order to print dynamic standard texts, it is better to check the option "No error if no text exists".
Karthik
Edited by: Karthik S on Sep 2, 2010 2:40 PM -
Assigning standard text to smartform
Hi everybody
i need to create standard text and that text has to be assigned to the form
how to do this.
regards
SrinuHi Srinu,
You can go through this document for more details...
http://esnips.com/doc/7e67af5c-6188-4252-8613-41816756d560/from-sappres.pdf
<b>Close the thread once it is resolved.</b>
Regards,
SP.
Maybe you are looking for
-
I am trying to find a portable cell phone signal booster
I am away from electricity and there are too many spots where I need a signal boost in order to do my work. Does anyone have any recommendations for anything that I can use to boost my iphone signal so I can use Siri easier to dictate but runs on bat
-
Photoshop CC 2014 file save issue on OS X Server 2.21
Before we start, I do know that Adobe doesn't officially support saving files to a file server. However on CC2014 sometimes when we save files they disappear and we are left with a temporary file in the directory. Wondering if anyone else has seen
-
Problem Compiling JAR Loaded in Oracle 10g
I have loaded a JAR file into my Oracle 10g database using the following command-line: Loadjava -force -oci8 -order -resolve -schema "MYSCHEMA" -user "USER/PASSWORD@HOST" -verbose "JarFile.jar" Unfortunately, after loading the JAR contents, the resol
-
The message app in mountain lion suddenly stopped working?
hey, chatting away to friends and family today sending through my messages, a red esclamation mark popped up at the side of the message i was about to send asking me do i want to resend ive repeatedly clicked re-send is the system down or? im not sur
-
Podcasts show up as music and not podcasts
All of my podcasts synch to my iPhone as music and do not show up under podcasts. They do show up as podcasts in my iTunes. Does this happen to anyone else or does anyone know a solution to this?