Standard Work flow for Leave approval in HR module

Hi ,
My query is there any standard work flow available in HR module for Leave approval and Over time approval. We have negative time management and with out ESS and MSS.
Pl suggest if any one has used this earlier with out ESS or EP
Regards
Punit

I can think of the following but not without enhancement for the workflow part.
- Since you are not using ESS, you (leave admin) may create the absence record directly in IT2001 (in LOCK mode).
- In the user exit of 2001 you may trigger your Workflow process (i.e. call the function module to trigger WF here) depending on the LCCK status. You have to explore if standard WF can be used to your requirement.
- Upon approval, you can UNLOCK the absence.
- In the event that UNLOCK is unsuccessful, trigger WF to your Leave Admin for him to update via PA30.
Standard SAP Workflow
- Only 1 level approval
- Using Chief Position
IF your workflow requirement deviates, then you have to also customize workflow, does not matter whether you are using ESS or not.
Finally test and retest to make sure all possible events are covered.
OT is the same, except that you need to use 2007 vs 2002
Edited by: sapuser909 on Nov 18, 2009 12:07 PM

Similar Messages

  • Standard Work Flow for Goods Receipt

    Hi All,
              I am working on Work flow is there any standard work flow for Goods Receipt?
    If so please help me in this regard.
    I found a BO BUS2017. Is this right one?
    Thanks.
    Ranganadh.

    hi,
    Refer to the link.
    Automatic mail sending for goods receipt
    Regards
    Sumit Agarwal

  • IT0022 Education- Is there a Standard work flow for ESS??

    Hello All,
    is there a standard work flow in SAP where in an employee updates his education details in ESS and a work flow is triggered either to Adminstrator / Manager to approve the same? if aint...how to make this possible, anyworkarounds?
    if yes, in what versions is it available/where?
    Any help wld be rewarded with Points.
    thanks
    hrbuddy
    **where can i look for standard ESS & MSS related workflows**
    Message was edited by:
            Hr Buddy

    There <b>"IS"</b> a central place where workflows can be accessed in SAP...which i eventually foundout...it is thru <b>Tcode SWDM - Business Workflow Explorer</b>
    There we need to check for component that we are looking workflows for....
    for example :
    EP-PCT-MGR-HR - Business Package for Manager Self-Service (HR)
    PA-ES - Employee Self-Service
    PT-EV -Time Evaluation
    And ofcourse Bus.Pack Documentation is always useful.

  • Work flow for Leave request without ESS

    Dear All,
    For one of our client, we have configure workflow for leave request, first is it possible to do tht?
    If so how to do it?, here we dont have ESS/MSS. Is there any standard workflow available?
    Thanx

    There is standard workflow task which give by SAP to approve leave request i.e. 12300111.
    But I am not sure this workflow task will work with out Portal or not.

  • Work flow for leave request through email

    Hi guru,
    my issue is, when employee requesting for leave through Net viewer (ESS). it must be trigger to
    out-look email id of authorized person. plz suggest me how i have to do configuration for this.
    Thanks,
    Rajesh

    Either you can make use of the report RPTARQEMAIL or you have a BADI PT_GEN_REQ implement this BADI, in this badi you can find a  method to determine the EMAIL list. IMplement the logic to send mails.
    Before doing this ask the basis guys to make appropriate SCOT settings inorder to send External Mails

  • Trigger Work Flow for payment release

    hi guys,
    kindly help me how to trigger the standard work flow for Payment release ((WS00400012).
    With Regards
    Pradeep N

    enter the Workflow
    in SWDD : WS00400012
    click on Agent Assignment and assign the Approver USer ID.
    click on the event linkage and activate and save.

  • Using work-flow for payment release

    Dear Experts
    I have a problem when using work-flow for payment release:
    I am using ws00400012 as standard work-flow for payment release ,after posting invoice documents via FB60 BSEG is crated but BKPFID dose not exist in container .
    when I test this work-flow it is running correctly via SWUS.
    It would be very helpful if someone can help me with this problem.
    Thanks and best regards,
    Azam

    http://help.sap.com/saphelp_46c/helpdata/en/6e/1217de9f0411d189b80000e829fbbd/frameset.htm
    Goto Accounts Payable (FI-AP) and in that "Vendor Down Payment Processing".
    Check out the link for workflow scenarios.. http://help.sap.com/erp2005_ehp_03/helpdata/EN/04/926f8546f311d189470000e829fbbd/frameset.htm
    Goto "Archiving Application Data (FI)" and check if your scenario exists or not !!!
    Regards,
    PR.

  • SAP STANDARD RETRIGGER WORK FLOW FOR SC CHANGES -SRM 550

    Hello ALL
    assume that we use any standard sap WF templates
    SC created
    SC awaiting for manager approval
    now requester changes any piece of data . will work flow retrigger ( again workitem created) for any cosmetic changes upon standard work flow templates used?
    what are the actions on shopping cart will retrigger the workflow
    now sc is awaiting for approval but below actions done by REQUESTER in the shopping cart
    1. changing sc descrition name?
    2. notes for approval?
    3.change qty /price /uom/ pg /product changes/ cost center changes /add attachment
    4.changing vendor
    please share what are the above actions will retrigger the workflow in SAP STANDARD.
    etc
    Mutu

    Hi,
    There is BBP_WFL_SECURITY setting in SRM 5.0.
    http://help.sap.com/saphelp_srm50/helpdata/en/37/830b3b7e7ef74de10000000a114084/frameset.htm
    I'm not sure if the table BBPD_COMP_FIELDS is for checking the changes.
    We can get answer by testing.
    Regards,
    Masa

  • Approval work flow for Role based and Resource based

    Hi All,
    We have to implement approval work flow for the following things in OIM 9.1.0.1
    Approval work flow for Functional Roles (Groups in OIM) (Approvalsrequired for users to get these roles)
    IT Roles (Resources in OIM) (Approvalsrequired for users to get these resource)
    Functional Role (Group) contains policy1,polici2. Polciy1 contains res1,res2 and Policy2 contain res3,res4.I want to create approval work flow for this Functional Role to achieve the following
    User raise a request for the functional role, then it should wait to get manager approval. then once its gets approval, that user account should create on all resources which are involved in that group.
    And, I have to define approoval work flow for all individual resources to get users account creation on target with approvals. These resources may include in the groups as well.
    After getting approval for functional role (Group), then Will OIM starts the approval flow for all resources involved in the group? becase, all resources have approval workflow at resource level also.
    My Goal: Approval work flow for Group, should not process the approval work flow for resource. can we do it in OIM 9.1.0.1?
    And can we do the same in OIM 11g also?
    Please help me and do let me know, if you need any information from my end.
    Thanks.

    Thats configurable buddy ! ! And possible in 10G and 11G both versions.
    Functional Roles : These are the groups/roles in OIM 10g/11g with access policies attached at the backend.
    - Create a dummy resource and name it Request Role or anything as you like. Attach an Object Form to it and have form field for Role Name, this would be a lookup type field linked to all OIM groups (leave system values using lookup query). So a user can select any OIM Group in this request as per configuration. Have approval workflows defined on this dummy resource Request Role and in its Provisioning Process make user/s a part of the requested group.
    - Now once the user is made a part of the group, the associated access policy would be invoked automatically and thereby provisioning. The only thing you need to keep in mind is that create the access policy without approval (there is a check box). If you do this the approvals would never be invoked even if you assign a group manually to the user coz it suppresses all the approvals in this access policy.
    IT Roles : These would be linked to the resource and you can define individual approvals on the resources as required.These approvals would be required if someone raises a request for these resources individually.
    Thanks
    Sunny

  • How to config work flow for approval in snp?

    Dear Expert,
    we want to running TLB for deployment stock orders which are approved by leaders.
    please tell us how to config work flow for approval in snp?
    thanks so much

    Hi,
    I got to know from DB49 that some workflow is available in GATP, but as far as I know, there is no such possibility in SNP.
    Deployment stock transfer kind of data exists in livecache order series, and it's very tough to manipulate it in some way to suit the approval workflow.
    As far as I can propose, you would need to do following (big custom development):
    1) Create a custom transaction
    2) Read Deployment Stock transfer data in accordance with your selection criteria and display it to the relevant user/approver
    3) User would accept/reject the Deployment Stock Transfer. This action is possible in a custom transaction.
    4) If Deployment Stock transfer is rejected, delete it from livecache
    5) Now when you run TLB, only approved Deployment Stock Transfer would be available to be coverted to STOs.
    In the above development, you could create logs/reports as you need for audit kind of purpose.
    This won't be a very simple development, but it's possible.
    May be someone could give you some better alternative.
    Thanks - Pawan

  • Triggering a sub work flow for multiple users at same time.

    I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
    This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
    How can this be achieved?

    Tyr to do like this,
    1. First include the subworkflow in the main workflow template.
    2. Now include standard Block Step in the main workflow template.
    3. In the block select the block type as ParForEach.
    4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
    5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing  assign the multiline container element name in the   for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
    &COSTCENTER[&_WF_PARFOREACH_INDEX&]&   -------->     &_COSTCENTER_LINE&
    Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

  • Work flow for Goods issue MIGO_GI

    Hi friends,
    I want to develop a work flow for good issue MIGO_GI  transaction.  Is there any standard work flow this scenario.
    When I deliver the 4 materials, the Material cost is 100*4 = 400, if the Material cost is greatr than 500, mail should trigger to the manager, if it less it will go to the first approver.
    please advice me in this.,
    regards,
    Ajay

    I think no stanadard workflow will provide you with such a validation, Better to design your own customized workflow template,
    Follow the below steps.
    1. Open PFTC select the task type workflow template
    2. Click F5 and define the relevant fields and make the agent assignemnt for the workflow template as general task from the menu  addtional agent  ---> agent assginement  --> maintain --> general task.
    3.  Check the BOR BUS2017 this might be useful.
    Check the method GoodsMovement.SAPCreate and its parameters  interface, if you can get the total values of the then include a condition and validate th total cost if is satrisfyies send mail and workitem to approver, if it does not satisfy then send only workitem to approver.
    Check the below BADI's
    MB_BAPI_GOODSMVT_CREATE        MB_GOODSMOVEMENT
    MB_BATCH_MASTER                MB_GOODSMOVEMENT
    MB_DOCUMENT_BADI               MB_GOODSMOVEMENT
    from where you can trigger your customized workflow by using the standard fm SAP_WAPI_CREATE_EVENT or SAP_WAPI_START_WORKFLOW*

  • Work Flow for Manually Disabling Account and Reporting on Disabling Account

    Hi All
    THis is my First Time To Create Work Flow for Idm Project Please Help me
    i want Work Flow for Manually Disabling Account and Reporting on Disabling Accounts
    Please Tell me How I will have to start, to create the code, I know how to configure but may be I will use BPEL or Through Netbeans and plugin I will use.
    please provide me sample code, so that I can start workflow work

    Thats configurable buddy ! ! And possible in 10G and 11G both versions.
    Functional Roles : These are the groups/roles in OIM 10g/11g with access policies attached at the backend.
    - Create a dummy resource and name it Request Role or anything as you like. Attach an Object Form to it and have form field for Role Name, this would be a lookup type field linked to all OIM groups (leave system values using lookup query). So a user can select any OIM Group in this request as per configuration. Have approval workflows defined on this dummy resource Request Role and in its Provisioning Process make user/s a part of the requested group.
    - Now once the user is made a part of the group, the associated access policy would be invoked automatically and thereby provisioning. The only thing you need to keep in mind is that create the access policy without approval (there is a check box). If you do this the approvals would never be invoked even if you assign a group manually to the user coz it suppresses all the approvals in this access policy.
    IT Roles : These would be linked to the resource and you can define individual approvals on the resources as required.These approvals would be required if someone raises a request for these resources individually.
    Thanks
    Sunny

  • Standard Work Flow in PP and QM

    Hi Gurus,
    What are the standard Work Flow in PP & QM ?
    Thanks in advance,
    Shree

    Hi
    Follow the Path to find it your self.
    <i><b>SPRO>Quality Management>Envrionment>Central Functions>Activate Workflow</b></i>
    You get a pop-up screen, Click on "<b>Activate SAP Business Workf</b>low"
    you get a screen "Task Customizing Overview"
    For each module you have a workflows
    click on <b>Assign Agents</b>  you will find the number of Tasks for each activities or functions
    Like Under Production Orders you will have "inform MRP Controller about trigger pt"
    etc like wise you have to use these Tasks provided by SAP to your build or combine as per customers requiremnts with proper agent assignments
    Regards
    Rehman
    <b>Reward Your Points If Useful</b>

  • Work Flow for Material Creation in MDM

    Hi MM Experts,
    Can any one tell me whether there is an option of having Work Flows for Creating Material in SAP MDM (Master Data Management). I think this feature is not available in Standard SAP R/3.
    Cheers
    Deepal

    hi
    check this website.
    https://www.sdn.sap.com/irj/sdn/nw-mdm?rid=/webcontent/uuid/5024a59a-4276-2910-7580-f52eb789194b [original link is broken]

Maybe you are looking for