Standby from active database

Hello,
I am attempting to create a physical standby database, following this guide:
http://www.oracle.com/global/uk/education/downloads/uwe_data_guard.pdf
as well as the oracle documentation on Data Guard. Using Oracle 11gR2 patched at #7 running on Windows Server 2008.
I've set all the parameters, created password files and checked connectivity. Hopefully correctly. I will post pfile exports at the end.
Here is where I hit a dead end.
RMAN> connect target system/[email protected]
connected to target database : HPROD89 (DBID)
RMAN> connect auxiliary sys/[email protected]
connected to auxiliary database: HPROD89STND (not mounted)
RMAN> duplicate target database for standby from active database;Error from spool. I need to spool the file to get the error code, otherwise the only thing rman provides is a "error message stack follows" message with nothing after that.
RMAN-03002: failure of Duplicate Db command at 11/19/2010 21:24:04
RMAN-06136: ORACLE error from auxiliary database: ORA-03114: not connected to ORACLEI'm running rman on the standby server with the database in NOMOUNT as the guide linked above suggests. This raises a simple question to start with: what server do I run rman on? The one with the primary database, or on the standby?
I hope it's just because it's getting late, but this issue has me confused .. rman clearly connects the auxiliary, but when trying to perform the actual duplication, it's not connected.
Thanks for input.
Regards.

primary parameters:
hprod89.__db_cache_size=3825205248
hprod89.__java_pool_size=33554432
hprod89.__large_pool_size=33554432
hprod89.__oracle_base='C:\app\oracle'#ORACLE_BASE set from environment
hprod89.__pga_aggregate_target=4127195136
hprod89.__sga_target=6375342080
hprod89.__shared_io_pool_size=0
hprod89.__shared_pool_size=2415919104
hprod89.__streams_pool_size=0
*._gby_hash_aggregation_enabled=FALSE
*._unnest_subquery=FALSE
*.audit_file_dest='C:\app\oracle\admin\HPROD89\adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='E:\oracle\oradata\HPROD89\controlfiles\control01.ctl','E:\oracle\oraflash\HPROD89\controlfiles\control02.ctl'
*.db_block_size=8192
*.db_domain='ad.rferl.org'
*.db_file_name_convert='E:\oracle\oradata\HPROD89STND\datafiles\','E:\oracle\oradata\HPROD89\datafiles\'
*.db_files=1021
*.db_name='HPROD89'
*.db_recovery_file_dest='E:\oracle\oraflash'
*.db_recovery_file_dest_size=104857600000
*.diagnostic_dest='C:\app\oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=HPROD89XDB)'
*.fal_server='HPROD89STND'
*.log_archive_config='dg_config=(HPROD89, HPROD89STND)'
*.log_checkpoint_interval=0
*.log_checkpoint_timeout=0
*.log_file_name_convert='E:\oracle\oradata\HPROD89STND\redologs\','E:\oracle\oradata\HPROD89\redologs\'
*.memory_target=10485760000
*.nls_language='ENGLISH'
*.nls_length_semantics='CHAR'
*.nls_territory='CZECH REPUBLIC'
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
standby:
hprod89stnd.__db_cache_size=5100273664
hprod89stnd.__java_pool_size=33554432
hprod89stnd.__large_pool_size=33554432
hprod89stnd.__oracle_base='C:\app\oracle'#ORACLE_BASE set from environment
hprod89stnd.__pga_aggregate_target=4227858432
hprod89stnd.__sga_target=6274678784
hprod89stnd.__shared_io_pool_size=0
hprod89stnd.__shared_pool_size=1040187392
hprod89stnd.__streams_pool_size=0
*._gby_hash_aggregation_enabled=FALSE
*._unnest_subquery=FALSE
*.audit_file_dest='C:\app\oracle\admin\HPROD89STND\adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='E:\oracle\oradata\HPROD89STND\controlfiles\control01.ctl','E:\oracle\oraflash\HPROD89STND\controlfiles\control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_name_convert='E:\oracle\oradata\HPROD89\datafiles\','E:\oracle\oradata\HPROD89STND\datafiles\'
*.db_files=1021
*.db_name='HPROD89S'
*.db_recovery_file_dest='E:\oracle\oraflash'
*.db_recovery_file_dest_size=104857600000
*.db_unique_name='HPROD89STND'
*.diagnostic_dest='C:\app\oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=HPROD89STNDXDB)'
*.log_checkpoint_interval=0
*.log_checkpoint_timeout=0
*.log_file_name_convert='E:\oracle\oradata\HPROD89\redologs\','E:\oracle\oradata\HPROD89STND\redologs\'
*.memory_target=10485760000
*.nls_language='ENGLISH'
*.nls_length_semantics='CHAR'
*.nls_territory='CZECH REPUBLIC'
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'

Similar Messages

  • RMAN 11gR2 DUPLICATE TARGET FOR STANDBY FROM ACTIVE DATABASE - Issue -HELP

    First question.
    Can primary and standby database have the same SID name?
    As I recall it is yes.
    I believe they must have different GLOBAL or DB_UNIQUE_NAME?
    Anyway, RMAN I believe is telling me it is having problems copying control file on first and dies.
    Permissions Issue on STANDBY machine?
    RMAN> connect target backup_admin/backup_admin
    connected to target database: LABDG (DBID=1973403623)
    RMAN> connect auxiliary sys/[email protected];
    connected to auxiliary database: LABDG (not mounted)
    RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE;
    Starting Duplicate Db at 18-JUL-11
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=10 device type=DISK
    contents of Memory Script:
    backup as copy reuse
    targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' auxiliar
    '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' ;
    executing Memory Script
    Starting backup at 18-JUL-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=151 device type=DISK
    Finished backup at 18-JUL-11
    contents of Memory Script:
    backup as copy current controlfile for standby auxiliary format '/u01/oradat
    restore clone controlfile to '/u01/app/oracle/flash_recovery_area/LABDG/cont
    '/u01/oradata/LABDG/control01.ctl';
    executing Memory Script
    Starting backup at 18-JUL-11
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting datafile copy
    copying standby control file
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 07/18/2011 11:20:54
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/18/2011 11:20:
    ORA-17628: Oracle error 19505 returned by remote Oracle server

    Hi,
    Permissions Issue on STANDBY machine?First problem I see is the sysdba password must be the same on both sides (target and auxiliary dbs).
    From the documentation.
    The source database and auxiliary instances must use the same SYSDBA password, which means that both instances must have password files. You can
    create the password file with a single password so you can start the auxiliary instance and enable the source database to connect to it.Check all prereqs for the standby db duplicate here.
    http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
    Rgds,
    Tycho

  • RMAN DUPLICATE FOR STANDBY FROM ACTIVE DATABASE fails

    Hello
    I'm trying to use RMAN DUPLICATE to create a standby database using Oracle 11.2.0.3 with PSU 6 on HP-UX.
    Primary is 2 node RAC. Standby is also 2 node RAC.
    Standby database instance is started in nomount mode.
    I use:
    duplicate target database for standby from active database
      spfile
      <some spfile parameters>
    with PFILE I get:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/01/2013 12:41:13
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of sql command on clone_default channel at 10/01/2013 12:41:13
    RMAN-11003: failure during parse/execution of SQL statement: alter system set spfile= '/opt/oracle/db11203/dbs/spfileCU1.ora'
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-01565: error in identifying file '/opt/oracle/db11203/dbs/spfileCU1.ora'
    ORA-27037: unable to obtain file status
    HPUX-ia64 Error: 2: No such file or directory
    With SPFILE I get;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/01/2013 13:06:34
    RMAN-05501: aborting duplication of target database
    RMAN-05537: DUPLICATE without TARGET connection when auxiliary instance is started with spfile cannot use SPFILE clause
    But I do have RMAN connexion to target database.
    Thanks for your help.

    Here is the output beginning of the script which clearly shows that I'm always connected to target database:
    Recovery Manager: Release 11.2.0.3.0 - Production on Tue Oct 1 13:05:47 2013
    Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
    connected to target database: CU (DBID=1143962925)
    connected to auxiliary database: CU (not mounted)
    RMAN> set echo on
    2> run
    3> {
    4>  configure device type disk parallelism 10;
    5>   allocate channel pr1 type disk;
    6>   allocate channel pr2 type disk;
    7>   allocate channel pr3 type disk;
    8>   allocate channel pr4 type disk;
    9>   allocate channel pr5 type disk;
    10>   allocate channel pr6 type disk;
    11>   allocate channel pr7 type disk;
    12>   allocate channel pr8 type disk;
    13>   allocate channel pr9 type disk;
    14>   allocate channel pr10 type disk;
    15>   allocate auxiliary channel st1 type disk;
    16>   allocate auxiliary channel st2 type disk;
    17>   allocate auxiliary channel st3 type disk;
    18>   allocate auxiliary channel st4 type disk;
    19>   allocate auxiliary channel st5 type disk;
    20>   allocate auxiliary channel st6 type disk;
    21>   allocate auxiliary channel st7 type disk;
    22>   allocate auxiliary channel st8 type disk;
    23>   allocate auxiliary channel st9 type disk;
    24>   allocate auxiliary channel st10 type disk;
    25>   duplicate target database for standby from active database
    26>   spfile

  • Duplicate database for standby from active database

    I'm running 11.1.0.7. Has anybody ever duplicated a standby database from active database and the active database being a physical standby open for read only with active dataguard instead of a primary dataguard database?
    The key here is location. The primary is located at a remote site where network bandwidth is inadequate for fast copy of database. The active standby database is at same site where I would like to build the new physical standby.

    I don't think you can, because "You cannot CONNECT RMAN to the standby database and then use DUPLICATE ... FOR STANDBY to create an additional standby database " and you can't fake it out by getting a controlfile from the primary because the controlfile has to match up with the backup and can't be a standby.
    But I'm wondering if you could failover to the standby, duplicate, fail back, then... oh well, that will never work either, incarnation problem.
    Snapshot standby? Could one back it up, then flashback restored new standby, change dbid? I would guess there would be an SCN problem, but don't know enough about it.

  • Duplicate target database for standby from active database session

    i have 1 tb db. for example i execute the duplicate command from activate standby database.after 500gb datafile copy the session terminate due to some bottle neck ( network) .is it possible to resume the job again means job again starded from the previous stage .
    thanks
    Edited by: 913779 on Sep 4, 2012 12:28 AM

    Hello;
    Changing my answer - you can use repeat DUPLICATE to do this :
    http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmdupdb.htm#BGBEFJHH
    As an alternative you could move the RMAN backup and then roll it forward :
    http://www.visi.com/~mseberg/duprman2.html
    and then :
    http://www.oracle-ckpt.com/?s=incremental&op.x=0&op.y=0
    Best Regards
    mseberg
    Edited by: mseberg on Sep 4, 2012 4:45 AM

  • Issue in configuring Standby Database from Active database in 11g by RMAN

    POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [[email protected] ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [[email protected] ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [[email protected] admin]$ rman target sys/[email protected] auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [[email protected] ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [[email protected] admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.
    Edited by: 895188 on Dec 21, 2012 5:50 PM
    Edited by: 895188 on Dec 21, 2012 6:09 PM
    Edited by: 895188 on Dec 21, 2012 6:22 PM

    Hello;
    Script has to be run from auxiliary.
    Great details, but what I don't see is how you connect in RMAN.
    Example
    Start RMAN
    $ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
    Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: RECOVER2 (DBID=3806912436)
    connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
    Generally for active duplication I start the future standby on a pfile NOMOUNT.
    Auxiliary Instance Initialization Parameters Needed :
    DB_NAME
    CONTROL_FILES
    DB_BLOCK_SIZE
    ( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
    Then start RMAN and finally run a single line duplication command.
    $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
    RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
    mseberg

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [[email protected] ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [[email protected] ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [[email protected] admin]$ rman target sys/[email protected] auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [[email protected] ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [[email protected] admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • Error during "duplicate target ... from active database"

    hi:
    RMAN duplicate failure after the auxiliary instance mounted,we want to create a physical standby database .
    Platform: solaris10 spark 64bit
    Version: 11.2.0.1.5 (both primary and standby)
    thank you..
    RMAN log:
    rman target sys/[email protected]_primary auxiliary sys/[email protected]_standby_tt
    Recovery Manager: Release 11.2.0.1.0 - Production on Thu Aug 30 15:40:06 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: HIS (DBID=3271178181)
    connected to auxiliary database: HIS (not mounted)
    RMAN> duplicate target database for standby from active database;
    Starting Duplicate Db at 30-AUG-12
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=2833 device type=DISK
    allocated channel: ORA_AUX_DISK_2
    channel ORA_AUX_DISK_2: SID=3399 device type=DISK
    allocated channel: ORA_AUX_DISK_3
    channel ORA_AUX_DISK_3: SID=3966 device type=DISK
    allocated channel: ORA_AUX_DISK_4
    channel ORA_AUX_DISK_4: SID=3 device type=DISK
    contents of Memory Script:
    backup as copy reuse
    targetfile '/u01/oracle/product/11.2.0/db_1/dbs/orapwhis' auxiliary format
    '/u01/app/oracle/product/11.2.0/db_1/dbs/orapwhis' ;
    executing Memory Script
    Starting backup at 30-AUG-12
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=1570 device type=DISK
    allocated channel: ORA_DISK_2
    channel ORA_DISK_2: SID=1708 device type=DISK
    allocated channel: ORA_DISK_3
    channel ORA_DISK_3: SID=1851 device type=DISK
    allocated channel: ORA_DISK_4
    channel ORA_DISK_4: SID=1995 device type=DISK
    Finished backup at 30-AUG-12
    contents of Memory Script:
    backup as copy current controlfile for standby auxiliary format '/u01/app/oradata/his/control01.ctl';
    restore clone controlfile to '/u01/app/oradata/his/control02.ctl' from
    '/u01/app/oradata/his/control01.ctl';
    restore clone controlfile to '/u01/app/oradata/his/control03.ctl' from
    '/u01/app/oradata/his/control01.ctl';
    executing Memory Script
    Starting backup at 30-AUG-12
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    channel ORA_DISK_1: starting datafile copy
    copying standby control file
    output file name=/export/home/oracle/snap.f tag=TAG20120830T154059 RECID=9 STAMP=792690060
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 30-AUG-12
    Starting restore at 30-AUG-12
    using channel ORA_AUX_DISK_1
    using channel ORA_AUX_DISK_2
    using channel ORA_AUX_DISK_3
    using channel ORA_AUX_DISK_4
    channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_1: copied control file copy
    Finished restore at 30-AUG-12
    Starting restore at 30-AUG-12
    using channel ORA_AUX_DISK_1
    using channel ORA_AUX_DISK_2
    using channel ORA_AUX_DISK_3
    using channel ORA_AUX_DISK_4
    channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_1: copied control file copy
    Finished restore at 30-AUG-12
    contents of Memory Script:
    sql clone 'alter database mount standby database';
    executing Memory Script
    sql statement: alter database mount standby database
    contents of Memory Script:
    set newname for tempfile 1 to
    "/u01/app/oradata/his/temp.266.750421813";
    set newname for tempfile 2 to
    "/u01/app/oradata/his/ts_temp_patrol.298.750425277";
    set newname for tempfile 3 to
    "/u01/app/oradata/his/ts_his_temp.296.750427905";
    set newname for tempfile 4 to
    "/u01/app/oradata/his/ts_tjjk_temp.282.750427917";
    set newname for tempfile 5 to
    "/u01/app/oradata/his/ts_temp_shuhao.595.782919539";
    switch clone tempfile all;
    set newname for datafile 1 to
    "/u01/app/oradata/his/system.256.750421615";
    set newname for datafile 2 to
    "/u01/app/oradata/his/sysaux.257.750421615";
    set newname for datafile 3 to
    "/u01/app/oradata/his/undotbs1.258.750421615";
    set newname for datafile 4 to
    "/u01/app/oradata/his/users.259.750421615";
    set newname for datafile 5 to
    "/u01/app/oradata/his/ts_his.280.750425023";
    set newname for datafile 6 to
    "/u01/app/oradata/his/ts_his_index.281.750425025";
    set newname for datafile 7 to
    "/u01/app/oradata/his/system.569.754307341";
    set newname for datafile 8 to
    "/u01/app/oradata/his/ts_bj.283.750425027";
    set newname for datafile 9 to
    "/u01/app/oradata/his/ts_gt.284.750425027";
    set newname for datafile 10 to
    "/u01/app/oradata/his/ts_fx.285.750425027";
    set newname for datafile 11 to
    "/u01/app/oradata/his/ts_uap.286.750425029";
    set newname for datafile 12 to
    "/u01/app/oradata/his/ts_gkxj.287.750425029";
    set newname for datafile 13 to
    "/u01/app/oradata/his/ts_xejj.288.750425031";
    set newname for datafile 14 to
    "/u01/app/oradata/his/ts_zdzyrz.289.750425031";
    set newname for datafile 15 to
    "/u01/app/oradata/his/ts_zj.290.750425033";
    set newname for datafile 16 to
    "/u01/app/oradata/his/ts_jgcp.291.750425033";
    set newname for datafile 17 to
    "/u01/app/oradata/his/ts_gtbj.292.750425033";
    set newname for datafile 18 to
    "/u01/app/oradata/his/ts_base.293.750425035";
    set newname for datafile 19 to
    "/u01/app/oradata/his/ts_exdata.294.750425035";
    set newname for datafile 20 to
    "/u01/app/oradata/his/ts_tjjk.295.750425037";
    set newname for datafile 21 to
    "/u01/app/oradata/his/ts_shuhao.594.782919537";
    set newname for datafile 22 to
    "/u01/app/oradata/his/ts_patrol.297.750425037";
    backup as copy reuse
    datafile 1 auxiliary format
    "/u01/app/oradata/his/system.256.750421615" datafile
    2 auxiliary format
    "/u01/app/oradata/his/sysaux.257.750421615" datafile
    3 auxiliary format
    "/u01/app/oradata/his/undotbs1.258.750421615" datafile
    4 auxiliary format
    "/u01/app/oradata/his/users.259.750421615" datafile
    5 auxiliary format
    "/u01/app/oradata/his/ts_his.280.750425023" datafile
    6 auxiliary format
    "/u01/app/oradata/his/ts_his_index.281.750425025" datafile
    7 auxiliary format
    "/u01/app/oradata/his/system.569.754307341" datafile
    8 auxiliary format
    "/u01/app/oradata/his/ts_bj.283.750425027" datafile
    9 auxiliary format
    "/u01/app/oradata/his/ts_gt.284.750425027" datafile
    10 auxiliary format
    "/u01/app/oradata/his/ts_fx.285.750425027" datafile
    11 auxiliary format
    "/u01/app/oradata/his/ts_uap.286.750425029" datafile
    12 auxiliary format
    "/u01/app/oradata/his/ts_gkxj.287.750425029" datafile
    13 auxiliary format
    "/u01/app/oradata/his/ts_xejj.288.750425031" datafile
    14 auxiliary format
    "/u01/app/oradata/his/ts_zdzyrz.289.750425031" datafile
    15 auxiliary format
    "/u01/app/oradata/his/ts_zj.290.750425033" datafile
    16 auxiliary format
    "/u01/app/oradata/his/ts_jgcp.291.750425033" datafile
    17 auxiliary format
    "/u01/app/oradata/his/ts_gtbj.292.750425033" datafile
    18 auxiliary format
    "/u01/app/oradata/his/ts_base.293.750425035" datafile
    19 auxiliary format
    "/u01/app/oradata/his/ts_exdata.294.750425035" datafile
    20 auxiliary format
    "/u01/app/oradata/his/ts_tjjk.295.750425037" datafile
    21 auxiliary format
    "/u01/app/oradata/his/ts_shuhao.594.782919537" datafile
    22 auxiliary format
    "/u01/app/oradata/his/ts_patrol.297.750425037" ;
    sql 'alter system archive log current';
    executing Memory Script
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    renamed tempfile 1 to /u01/app/oradata/his/temp.266.750421813 in control file
    renamed tempfile 2 to /u01/app/oradata/his/ts_temp_patrol.298.750425277 in control file
    renamed tempfile 3 to /u01/app/oradata/his/ts_his_temp.296.750427905 in control file
    renamed tempfile 4 to /u01/app/oradata/his/ts_tjjk_temp.282.750427917 in control file
    renamed tempfile 5 to /u01/app/oradata/his/ts_temp_shuhao.595.782919539 in control file
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting backup at 30-AUG-12
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    channel ORA_DISK_1: starting datafile copy
    input datafile file number=00008 name=+DATA/his/datafile/ts_bj.283.750425027
    channel ORA_DISK_2: starting datafile copy
    input datafile file number=00009 name=+DATA/his/datafile/ts_gt.284.750425027
    channel ORA_DISK_3: starting datafile copy
    input datafile file number=00005 name=+DATA/his/datafile/ts_his.280.750425023
    channel ORA_DISK_4: starting datafile copy
    input datafile file number=00015 name=+DATA/his/datafile/ts_zj.290.750425033
    RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_3 disabled, job failed on it will be run on another channel
    RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_4 disabled, job failed on it will be run on another channel
    RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_2 disabled, job failed on it will be run on another channel
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_1 disabled, job failed on it will be run on another channel
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 08/30/2012 17:49:09
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN>
    Primary database alert log:
    Thu Aug 30 15:41:00 2012
    Clearing standby activation ID 3277937203 (0xc3615a33)
    The primary database controlfile was created using the
    'MAXLOGFILES 16' clause.
    There is space for up to 11 standby redo logfiles
    Use the following SQL commands on the standby database to create
    standby redo logfiles that match the primary database:
    ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl5.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl6.f' SIZE 536870912;
    WARNING: OMF is enabled on this database. Creating a physical
    standby controlfile, when OMF is enabled on the primary
    database, requires manual RMAN intervention to resolve OMF
    datafile pathnames.
    NOTE: Please refer to the RMAN documentation for procedures
    describing how to manually resolve OMF datafile pathnames.
    Thu Aug 30 16:10:13 2012
    Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25860.trc (incident=72361):
    ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
    Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72361/his_ora_25860_i72361.trc
    Thu Aug 30 16:10:20 2012
    Trace dumping is performing id=[cdmp_20120830161020]
    Thu Aug 30 16:10:22 2012
    Sweep [inc][72361]: completed
    Sweep [inc2][72361]: completed
    Thu Aug 30 16:40:32 2012
    Thread 1 cannot allocate new log, sequence 3031
    Private strand flush not complete
    Current log# 4 seq# 3030 mem# 0: +DATA/his_primary/onlinelog/group_4.579.759345057
    Current log# 4 seq# 3030 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_4_74nf15rq_.log
    Thread 1 advanced to log sequence 3031 (LGWR switch)
    Current log# 5 seq# 3031 mem# 0: +DATA/his_primary/onlinelog/group_5.261.759345075
    Current log# 5 seq# 3031 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_5_74nf1q2g_.log
    Thu Aug 30 16:40:37 2012
    LNS: Standby redo logfile selected for thread 1 sequence 3031 for destination LOG_ARCHIVE_DEST_2
    Thu Aug 30 16:40:39 2012
    Archived Log entry 5829 added for thread 1 sequence 3030 ID 0xffffffffc3615a33 dest 1:
    Thu Aug 30 16:42:15 2012
    Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25862.trc (incident=72369):
    ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
    Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72369/his_ora_25862_i72369.trc
    Thu Aug 30 16:42:17 2012
    Trace dumping is performing id=[cdmp_20120830164217]
    Thu Aug 30 16:42:17 2012
    Sweep [inc][72369]: completed
    Sweep [inc2][72369]: completed
    Thu Aug 30 16:51:53 2012
    Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25858.trc (incident=72353):
    ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
    Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72353/his_ora_25858_i72353.trc
    Thu Aug 30 16:51:55 2012
    Sweep [inc][72353]: completed
    Sweep [inc2][72353]: completed
    Thu Aug 30 16:51:55 2012
    Trace dumping is performing id=[cdmp_20120830165155]
    Edited by: 960892 on 2012-9-24 上午2:22

    hi:
    this is the initialization parameter file for auxiliary instance:
    *.audit_file_dest='/u01/oracle/admin/his/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u01/app/oradata/his/control01.ctl','/u01/app/oradata/his/control02.ctl','/u01/app/oradata/his/control03.ctl'
    *.db_block_size=8192
    *.db_domain='abc.com.cn'
    *.db_file_name_convert='+DATA/his/datafile/','/u01/app/oradata/his/','+DATA/his/tempfile/','/u01/app/oradata/his/','+DATA/his_primary/datafile/','/u01/app/oradata/his/','+DATA/his_primary/tempfile/','/u01/app/oradata/his/'
    *.db_files=1000
    *.db_name='his'
    *.db_recovery_file_dest='/backup/oracle'
    *.db_recovery_file_dest_size=1073741824000
    *.db_unique_name='his_standby_tt'
    *.diagnostic_dest='/u01/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=hisXDB)'
    *.fal_client='his_standby_tt'
    *.fal_server='his_primary'
    *.log_archive_config='DG_CONFIG=(his_primary,his_standby_tt)'
    *.log_archive_dest_1='LOCATION=/backup/oracle/HIS_STANDBY_TT/archivelog VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=his_standby_tt'
    *.log_archive_dest_2='SERVICE=his_primary LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=his_primary'
    *.log_archive_dest_state_1='enable'
    *.log_archive_dest_state_2='enable'
    *.log_file_name_convert='+DATA/his_primary/onlinelog/','/u01/app/oradata/his/','/backup/odsdb/HIS_PRIMARY/onlinelog/','/u01/app/oradata/his/'
    *.memory_target=2181038080
    *.nls_language='SIMPLIFIED CHINESE'
    *.nls_territory='CHINA'
    *.open_cursors=300
    *.processes=3000
    *.remote_login_passwordfile='EXCLUSIVE'
    *.service_names='his.abc.com.cn,his_standby_tt.abc.com.cn'
    *.sessions=3305
    *.standby_file_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.event='10298 trace name context forever, level 32'

  • How reliable is DUPLICATE .. FROM ACTIVE DATABASE ?

    Version : 11.2.0.3
    Platform : OEL 6
    DUPLICATE .. FOR STANDBY FROM ACTIVE DATABASE doesn't involve taking any RMAN Backup files. Right? Just transferring data across the network.
    Given that I have a good network throughput, how reliable it is to use this feature to create a standby from a 2 TeraByte Primary ? The standby DB will be created in our Data Center located 50KM away from the Primary Site.

    Kavanagh wrote:
    Version : 11.2.0.3
    Platform : OEL 6
    DUPLICATE .. FOR STANDBY FROM ACTIVE DATABASE doesn't involve taking any RMAN Backup files. Right? Just transferring data across the network.
    Given that I have a good network throughput, how reliable it is to use this feature to create a standby from a 2 TeraByte Primary ? The standby DB will be created in our Data Center located 50KM away from the Primary Site.2TB is not a small database to perform Duplicate from ACTIVE Database, Yes as you said there is no more need of backups from 11g if you use ACTIVE database.
    Do not consider of the distance, Consider the bandwidth speed between two sites and how fast data can transfer and how stable it is.
    You can test the network speed by transferring any one of the big file using SCP also, On top of that you can estimate how much time it can complete and ensure there is no network glitches/interruptions to avoid failure duplicate.

  • RMAN duplicate target database for standby from active fails to create newname for system tablespace/datafile

    When executing 'duplicate target database for standby from active'  the system tablespace/datafile (datafile 1)  is not cloned.  All other datafiles clone successfully.  The RMAN process aborts with the following errors while attempting to clone the system tablespace/datafile.
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    Here are the details:
    Primary is 11.2.0.2 RAC database  on an Exadata platform
    Standby is 11.2.0.2 Single Instance database (same patch level as primary) on a Red Hat Linux box
    This is an ASM to ASM duplication.
    This is not unique to this database.  We tried another database and go the same behavior - all datafiles clone successfully with the exception of the system tablespace/datafile.
    We have traced the RMAN execution and it seems to fail when it is trying to assign a NEWNAME to the system tablespace/datafile.
    We even issued an explicit SET NEWNAME command but RMAN ignored it.
    We also shutdown the primary and started is up in mount mode thinking that something had ahold of the System Tablespace/datafile.
    We also opened up the network firewall to allow permit any,any traffic.
    We increased the max_server_processes
    and added TCP.NODELAY=yes to the sqlnet.ora file.
    There seems to be some artifact present in our Primary System tablespace/data file that is preventing it form being cloned.
    checked all alert files grid, asm,  and dbhome - no abnormal messages.
    We are in the process of restoring the database from a backup but we would prefer to get this working using the 'Active Database' methodology

    I successfully created the standby database using RMAN backup and recovery.
    I started the managed recovery.  Archive logs are being sent from the primary to the standby ( I can see them in ASM), but the standby is not applying them.
    I get the following messages in the standby alert log...
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:19:58 2013
    Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
    Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
    Tue Nov 26 16:20:01 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:11 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:22 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:32 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    I don't see any MRP processes:
    select process,
    status,
        thread#,
        sequence#,
       block#,
      blocks
      7     from v$managed_standby;
    PROCESS   STATUS          THREAD#  SEQUENCE#     BLOCK#     BLOCKS
    ARCH      CLOSING               2     154363          1        132
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    RFS       IDLE                  0          0          0          0
    RFS       IDLE                  1     145418        121          1
    RFS       IDLE                  0          0          0          0
    PROCESS   STATUS          THREAD#  SEQUENCE#     BLOCK#     BLOCKS
    RFS       IDLE                  0          0          0          0
    12 rows selected.
    SQL>  SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
       THREAD#  SEQUENCE# APPLIED
             2     154356 NO
             2     154357 NO
             1     145411 NO
             2     154358 NO
             2     154360 NO
             2     154361 NO
             1     145414 NO
             1     145415 NO
             2     154362 NO
             2     154363 NO
             1     145416 NO
    11 rows selected.
    I do have the archive logs that cover sequences 154158-154257
    Crosschecked 38 objects
    Crosschecked 62 objects
    Finished implicit crosscheck backup at 26-NOV-13
    Starting implicit crosscheck copy at 26-NOV-13
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    Crosschecked 2 objects
    archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154377.344.832521989 RECID=29 STAMP=832521990
    validation succeeded for archived log
    archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154378.346.832521991 RECID=31 STAMP=832521993
    Crosschecked 31 objects

  • Duplicate from Active database

    Hi,
    I have RAC primary database running in 11.2.0.3 with linux 5(dc). We also have configured RAC cluster on DR site recently.Now we need to create stanby database on DR site.
    For this is have following doubts
    My database size is 6TB(from dba_segmnets) and total is 14TB(from dba_data_files)
    1) How duplicate of active database works internally? Does it copy the exact file to standby site for example copy datafile(which is of 5GB in size) and send it over to standby over network?
    2) Both primary and standby sites are in different states, so i was thinking to backup the primary database first to tapes and then courier tapes to dr site and then finally restore and recover standby.
    I have doubts in above approaches which should i implement. I think active database duplication will skip a)backup time b) courier time. Is that correct?
    However if my database size is 14TB and using 1st method, does it send files to dr worth of 14TB size?

    I am working on active database duplication and has below issue. Can any one help me on this?
    RMAN> connect target [email protected]
    connected to target database: PA305 (DBID=2787277616)
    RMAN> connect auxiliary [email protected]
    connected to auxiliary database: PB305 (not mounted)
    RMAN> DUPLICATE TARGET DATABASE
    TO 'PB305'
    FROM ACTIVE DATABASE
    2> 3> 4> ;
    Starting Duplicate Db at 31-JUL-2012 17:20:07
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=2838 instance=PB3051 device type=DISK
    contents of Memory Script:
    sql clone "alter system set control_files =
    ''+DG_075_DATA01/PB305/controlfile/current.270.790104009'', ''+DG_075_FRA01/PB305/controlfile/current.286.790104009'' comment=
    ''Set by RMAN'' scope=spfile";
    sql clone "alter system set db_name =
    ''PA305'' comment=
    ''Modified by RMAN duplicate'' scope=spfile";
    sql clone "alter system set db_unique_name =
    ''PB305'' comment=
    ''Modified by RMAN duplicate'' scope=spfile";
    shutdown clone immediate;
    startup clone force nomount
    backup as copy current controlfile auxiliary format '+DG_075_DATA01/PB305/controlfile/current.269.790104009';
    restore clone controlfile to '+DG_075_FRA01/PB305/controlfile/current.288.790104009' from
    '+DG_075_DATA01/PB305/controlfile/current.269.790104009';
    sql clone "alter system set control_files =
    ''+DG_075_DATA01/PB305/controlfile/current.269.790104009'', ''+DG_075_FRA01/PB305/controlfile/current.288.790104009'' comment=
    ''Set by RMAN'' scope=spfile";
    shutdown clone immediate;
    startup clone nomount;
    alter clone database mount;
    executing Memory Script
    sql statement: alter system set control_files = ''+DG_075_DATA01/PB305/controlfile/current.270.790104009'', ''+DG_075_FRA01/PB305/controlfile/current.286.790104009'' comment= ''Set by RMAN'' scope=spfile
    sql statement: alter system set db_name = ''PA305'' comment= ''Modified by RMAN duplicate'' scope=spfile
    sql statement: alter system set db_unique_name = ''PB305'' comment= ''Modified by RMAN duplicate'' scope=spfile
    Oracle instance shut down
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 07/31/2012 17:20:18
    RMAN-06174: not connected to auxiliary database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    RMAN>

  • Standby to active database

    Hi All
    I am looking for some doc which tell about creation of Active database from standby without DG broker. I am looking for doc for 10g/11g version.
    kindly inform me . Thanks in advance.
    Thanks
    Krishna

    Actually my requirement is linke this. we are planning to have exadata serever with high capacity. on the server where my Standby is runing on same machine i >want to have my TEST/DEV database also. and we want cloning of databse on daily basis. so my TEST/DEV will be cloned from standby (using RMAN) and my >Data Guard should also be continue. Now your requirement is very much clear (Initially there was a bit confusion with your subject line :) ). You can have the cloning activity being carried out from the standby to the test database but during this process, the MRP (managed recovery process) on the standby database will have to be stopped. So, it means that, at the time of cloning, log shipping and applying of logs from the primary to the standby would not be carried out.
    Before the clone:
    On standby:
    SQL>alter database recover managed standby database cancel;
    Connect to target as the standby database and auxiliary as the test database (Remember your target database (standby) would be in mount stage and the auxiliary >database (dev) would be in nomount stage)
    RMAN target sys/[email protected] axuiliary sys/[email protected]
    RMAN>duplicate target database to 'dev' from active database nofilenamecheck;This would clone your standby database to dev but during the cloning activty you need to cancel the managed recovery on the standby. Once the cloning is done, you need to start the managed recovery on the standby again.
    On standby:
    sql>alter database recover managed standby database disconnect from session;If you do not cancel the recovery before cloning activity, then you would be getting errors while opening the dev database saying that the "system datafile is inconsistent and needs recovery".
    Note: This is tried without dataguard broker (normal sql commands). I have disabled the dataguard broker configuration and normally do not use it.

  • Rman clone duplicate database from active database

    Hi All,
    I read document saying that rman can duplicate database from active database (prod) to a remote server, so long as you configure listener and tnsname.
    I am working toward it.
    I met a problem, which is when i bring up auxiliary database in nomount mode, the listener service of that auxiliary database is in BLOCKED status, and throw out ora-12528 error when I rman auxiliary sys/[email protected] Isn't nomount mode the mode which auxiliary db is supposed to be in?
    (ora-12528: TNS:listener: all appropriate instances are blocking new connections)
    Thanks,
    milic

    You may have run into the same problem like I did recently:
    The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
    ORA-12528: TNS listener BLOCKED - trying to duplicate database
    Also for further problems:
    RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

  • Creating a duplicated database from active database

    I'm having problem trying to duplicate a database from a target database (PROD) to the auxiliary one (AUX).
    This is what I've configured:
    listener.ora
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME = PROD)
          (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
          (SID_NAME = PROD)
        (SID_DESC =
          (GLOBAL_DBNAME = AUX)
          (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
          (SID_NAME = AUX)
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521))
    ADR_BASE_LISTENER = /u01/app/oracletnsnames.ora
    AUX =
      (DESCRIPTION =
        (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = AUX)
    PROD =
      (DESCRIPTION =
        (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = PROD)
      )/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
    db_name='AUX'
    cp /u01/app/oracle/product/11.2.0/db_1/dbs/orapwPROD /u01/app/oracle/product/11.2.0/db_1/dbs/orapwAUX- Started PROD database (open and in archive log mode)
    - Started AUX database (in nomount mode and usinf pfile='/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora')
    But when I issue the following command I get connected to auxiliary database (not started) :
    rman target sys/[email protected] auxiliary sys/[email protected]
    connected to target database: PROD (DBID=196032563)
    connected to auxiliary database (not started)And executing the duplicate command it returns:
    RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
    Starting Duplicate Db at 2010-09-28:13:36:50
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/28/2010 13:36:50
    RMAN-06403: could not obtain a fully authorized session
    RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directorylsnrctl stopped and restarted several times. This is the output of lsnrctl status command:
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 28-SEP-2010 13:45:14
    Copyright (c) 1991, 2009, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=my_ip)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date                28-SEP-2010 12:44:50
    Uptime                    0 days 0 hr. 1 min. 22 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
    Listener Log File         /u01/app/oracle/diag/tnslsnr/my_ip/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=my_ip)(PORT=1521)))
    Services Summary...
    Service "PROD" has 1 instance(s).
      Instance "PROD", status READY, has 1 handler(s) for this service...
    Service "PRODXDB" has 1 instance(s).
      Instance "PROD", status READY, has 1 handler(s) for this service...
    Service "AUX" has 2 instance(s).
      Instance "AUX", status UNKNOWN, has 1 handler(s) for this service...
      Instance "AUX", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfullyI have already created a duplicated database from a backup of the target one and the configuration was quite the same: the differences are that using active database duplication I needed to use orapw files (and they need to have the same password) and that I needed to connect using Oracle Net service name to connect to the auxiliary instance.. otherwise I got:
    export ORACLE_SID=AUX
    rman target sys/[email protected] auxiliary sys/oracle
    connected to target database: PROD (DBID=196032563)
    connected to auxiliary database: AUX (not mounted)
    RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
    Starting Duplicate Db at 2010-09-28:12:27:21
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/28/2010 12:27:21
    RMAN-06217: not connected to auxiliary database with a net service nameWhere am I wrong?

    Thanks for your support. My instance was and is still in nomount mode. But I'm not able to connect this instance as auxiliary and in the right expected mode:
    connected to auxiliary database: AUX (not mounted)
    [[email protected]_ip oracle]$ env|grep SID      
    ORACLE_SID=AUX
    [[email protected]_ip oracle]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Wed Sep 29 10:28:44 2010
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    idle> shutdown immediate
    ORA-01507: database not mounted
    ORACLE instance shut down.
    idle> startup nomount pfile=/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
    ORACLE instance started.
    Total System Global Area  217157632 bytes
    Fixed Size                  2211928 bytes
    Variable Size             159387560 bytes
    Database Buffers           50331648 bytes
    Redo Buffers                5226496 bytes

  • RMAN restore from active database, ASM

    I'm attempting to refresh a stage database from a prod database using RMAN restore from active database. Both are on ASM. After working through various hurdles, I've got one issue I'm a bit stuck on. I've got a handful of data files that do NOT have OMF names (ie MSTRDATA/mstrmdpd/datafile/gsa_indx instead of MSTRDATA/mstrmdpd/datafile/gsa_indx.351.714779777) and these are failing when I do the restore. The syntax I'm using in RMAN is as follows:
    duplicate target database to dwstage
    from active database
    spfile parameter_value_convert 'dwprod','dwstage'
    SET DB_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE'
    SET LOG_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE';
    The error message I'm getting is this:
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/21/2011 13:26:24
    ORA-17628: Oracle error 19505 returned by remote Oracle server
    continuing other job steps, job failed will not be re-run
    Normally from what I've seen/read this error can be traced back to needing to pre-create the directories for the controlfiles etc, but since 90% of the datafiles copied correctly...
    Any suggestions as to a way around this, or am I going to be forced to restore from a backupset?

    This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
    Could you please help me on how to proceed?
    One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
    Another option is to go for backup based duplicate.
    Is there any other way to go?
    Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME = AUXDB)
          (ORACLE_HOME = <your oracle home>)
          (SID_NAME = AUXDB)
    LISTENER =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
      )And restart listener on auxiliary host then try again

Maybe you are looking for

  • My photoshop will not open files or create new files, please help?

    Photoshop CS6 on Windows 7 will not work, When machine is first started the program works, for about 10 mins, then I can not open files, create new ones. When it does work it can not perform functions like transform etc. I tried disabling third party

  • FireWire conflict

    I just got a new LaCie external 3TB hard drive connected to my Mac Pro via FireWire 800. I started using it as a secondary Time Machine backup drive, but when Time Machine is backing up to it, I cannot use my iSight camera with Messages. I am still u

  • Rebate scenarios

    Dear All, In rebate scenario, before starting of year, quarter and month there is agreement between customer and company that if he achieves his 100 % target(in inr) he will get extra discount 1% and if he achieve 110% he will get 2% and if he achiev

  • Question on Dynamic Internal Table creation

    Good day everyone. I would like to ask if it is possible to just add several fields to an existing internal table to make it dynamic? if possible, does anyone have a sample program? thanks a lot!

  • Formula to decide no.of process....

    Hi All, I am using ORACLE 11gR2. When I see the default value of processes and sessions is 150 and 247 respectively. I want to know that is there any formula to decide the how many processes required like processes=1.1*session+5 etc.? And what is the