Standby mode problem - iPhone 4S

I have an iPhone 4S, 16GB, firmware 5.0.1.
When I click on the stanby button, and the iphone goes to standby mode,
sometimes happens that when I click the stanby button againt it doesn't works
and is blocked with black screen.
The phone fails to resume from standby.
The only thing I can do is keep pressed both power and home button.

Configure the router to do DHCP automatically, try not to hard code the ip address.
1. Try rebooting the router.
2. See if there's a firmware update for your router.
Read this: http://support.apple.com/kb/TS1398

Similar Messages

  • Standby mode problem

    anyone ever have this problem wit their S10 netbook where you flip the screen down and the computer goes into standby mode, but after an hour the computer boots itself up and the screen turns on? This has happened to me ever since I got my netbook and I don't know how to keep the computer from waking up. Thanks!
    Solved!
    Go to Solution.

    Hi there...Update to latest BIOS  ? and check all settings in ....
    Lenovo Energymanagement 
    sincerely KalvinKlein 
    Want more ? For further information to get the most of your S-Class machine
    Lenovo Energymanagement 
    Backup
    Windows 7 Vista XP Driver all S-Series
    Windows 7  Install
    Clean XP Install
    XP Startup
    Small WebCam Guide
    Lenovo Easy Capture
    Resolution > 1024 x 576 / 600  Works with XP Only
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Nokia 6680 Standby Mode Problem

    I cant change my Nokia 6680 Standby Mode. Its disapeard. When I go to Setting and then Standby Mode, I cant see Activate Standby Mode there anymore. Ive formated phone memroy but still I cant...Anybody has any information about this problem?

    15-Mar-2008 07:57 AM
    clairelouise73 wrote:
    Hi. I've recently been given a Nokia 6680 which I've had unlocked and started using. I've found that when I plug my charger in the phone indicates it is charging but once I pull the charger out (after various periods of time) it shows up as low battery. I have tried 2 different chargers and 2 different batteries. I am currently using an old nokia phone to charge up a battery to put in the 6680 every day. Help? Am I doing something wrong??
    Prior to it being unlocked it charged up no problem.
    If you have a new phone you need to keep it on charge for 16 hours. Once the battery is fully charged the charge indicator stops moving which would tell you that the battery is full.
    If my post has helped you please click the white star on the right

  • FiOS + VCR + Standby Mode = problems for my Grandma.

    So my Grandma just got FiOS. She still "tapes" stuff using VCR's (crazy, I know... but she ain't changing).
    Problem is, since she's had FiOS, she has been left with a bunch of tapes that contain nothing but the black standby "Press Menu to blah blah blah" screen instead of the shows she was supposed to be recording.
    Is there any way around this in her situation?
    Thanks in advance for any help. 
    Solved!
    Go to Solution.

    By default, the remote will turn off / on both the TV and the STB when you press the power button.   Normally that is exactly what you want to occur.   You can however disable that sequence and make it so that the power button only works the device you have selected on the remote.
    From the remote documentation:
    On the remote:
    1.  Press and hold the STB key.
    2.  While hlding down the STB, press OK
    3.  Release both keys.  The Device keys will blink twice.
    4.  Press 9 - 7 - 7.  The STB key will blink twice.
    5.  Press OK.  The STB key will blink 3 times to indicate success in programming. 
    Now, to turn off the TV, press the TV key and then the Power button.   To turn off the STB, press the STB key and then the power button.   To work the STB, press the STB key followed by whatever commands you wanted to perform (channel, volume, etc.)

  • IPhone 5 battery draining after iOS 6.0.2 update even on standby mode without wifi/ 3G at all.

    My newly bought iPhone 5 was on iOS 6.0.1
    everything worked fine and i had no wifi nor battery issues at all until I upgraded it to iOS 6.0.
    i noticed some battery drainage even when i'm not using my phone at all it still drains 1-2% on standby mode with no wifi nor 3G at all in an hour,
    If i use wifi it'll drain 4-5% in a few minutes time, more serious case when i use 3G, it's literally draining in EVERY SINGLE MINUTE.

    ckuan wrote:
    Jonathan wrote:
    So my iPhone 5 always had the problem of disconnecting from the wifi signal I was on whenever the iPhone is locked.
    Per designed, Wi-Fi will disconnect in sleep mode to save battery.
    If you want Wi-Fi to stay connected even in sleep mode, plugin to a wall power socket.
    No it's not "per design". It's not supposed to disconnect when locked/in sleep mode. The whole concept of having live notifications to work when your phone is locked is the standard for smartphones. Having this feature only accessable when pluging/charging the phone is rediculous and counter-productive. But it's good to know that I'm not the only one who has this issue. I hope all our issues are solved swiftly, good luck to you all

  • How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
    Thank you very much!
    Regarding the Alarmed app, doesn't it have to be running to actually remind you?
    -Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
    I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
    Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
    I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

  • After Updating the iOS 7.04 on my iPhone 4s drain battery quickly on standby mode & also doesn't respond volume up button, why?

    After Updating the iOS 7.04 on my iPhone 4S drain battery quickly even on standby mode & also doesn't respond volume up button, why?

    My battery problem woes continues to persist.  Yesterday, I had about 85-90% battery life in the morning.  A couple hours later when I looked at the phone it was down to 65%.  At that point, I shut off wi-fi, bluetooth, and background app refresh.  I received one call shortly after that.  The call lasted about two minutes.  My battery was now down to 40%.  Another hour later, down to 16%!  Here's the kicker:  I plugged in the phone to a charger and it jumped to 65% in a matter of minutes.  I unplugged the phone and within a couple of hours it was back down to around 30%.  I plugged it in again and within 10 minutes it was up to 75%.
    At first glance it looks very much like a hardware issue.  However, I never had this problem until I upgraded to 7.0.4.  Also, the above battery roller coaster ride isn't a constant.  That is, it seems that only sometimes this happens.  So...I'm thinking it's either an app running in the background eating up juice (though I have Background App Referesh turned off) or the iOS is buggy. 

  • Iphone does not ring in standby mode

    my father has an iphone 3G,
    and it will not ring in standby mode.
    it worked perfectly when he was on 2.0,
    but when he upgraded to 2.1 it started having some problems.
    now he has 2.2.1 and the only problem it has is it will not ring while in standby.
    it will only ring when unlocked.
    is anyone else having this issue,
    and does anyone have any way to fix it?
    i dont know if it is irrelevant or not,
    but he is on windows XP.

    I was having the same problem and did a couple of "restores" and the issue kept coming back, after several calls and not much help I decided to delete an application that I had downloaded which was "Ski jump lite" and the problem has gone away. It worked fine on the previous version of apple software.
    Regards
    Steve

  • Iphone 6 randomly shutdown in standby mode

    My Iphone 6 16gb randomly shutdown in standby mode, i only can turn it on by hold POWER + HOME. here is the log :
    {"name":"Reset count","bug_type":"115","os_version":"iPhone OS 8.1 (12B411)"}
    Incident Identifier: F0B79DBE-0BE1-431A-813E-70E7E2C17942
    CrashReporter Key: 7305c452a84bf7ce3738c4bedf794c8e76fc4c58
    Date: 2014-11-24 09:17:58 +0700
    Reset count: 1
    Boot failure count: 2
    Boot faults: wdog btn_rst
    Boot stage: 32
    Boot app: 2681261667
    Is this a hardware issue or software issue? thanks

    Hi hnguyen1982,
    If you are having an issue with your iPhone shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article - 
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Problems with standby mode in Windows XP

    Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

    Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
    Vostro 1500 XP downloads
    However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
    a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
    b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
    c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
    Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
    Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
    A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
    Jim

  • My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

    My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

    That's normal behavior. It turns off automatically in order to preserve the battery. Pushing the On/Off button turns it on immediately. This also requires entering the passcode and prevents the phone from being accessed by anyone but you.

  • How to turn off processes (battery drain problems even in standby mode)?

    I have the new iPad (3) and a number of processes keep running in the background even though I have "deleted" them in the multi-task pane, i.e., I have double clicked the circle, held down each app and then hit the red dash so that no apps are running in the background.  For example, I keep getting notifications that apps need to be updated which means my iPad is checking with the app store - this is happening even though my notification center is empty. I also have a battery app that tells me 30+ processes are running even though I have no open apps. I understand that some processes must always run, but I would like to disable the unnecessary ones b/c I continue to have terrible battery performance, even in standby mode.
    As for standby battery performance, the strange thing is that sometimes my battery doesn't drain in standby at all and then other times it drains over 10% over one night. Each time there are no apps running in the background and I have no idea what is causing the inconsistent behavior, but I can only assume there must some process issue. 
    Anyone have any thoughts?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • W520+Win7-64, Standby Mode: MessageBox Problems ejecting...

    Hello world,
    I'm using a SSD in the internal harddisk slot and the original harddisk running in an ultrabay adapter. Windows is installed on the SSD. Each time I go into standby-mode and return, I see the message box "Problems eject XXXX, the device is currently in use...."
    In the eventlog there are multiple messages saying
    "The application \Device\HarddiskVolume2\Prog\xxxl.exe with process id 4796 stopped the removal or ejection for the device IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0."
    followed by a
    "Device action request for device 'IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0' was vetoed by 'STORAGE\Volume\{2483acec-a2e3-11e0-9cfe-fe3c617a851b}#0000000000100000' with veto type 6."
    Has anybode an idea how to get rid of this messages?
    TIA,
       Bernd

    I think I have a related issue. I have a SSD with my old drive in the ultrabay also
    On wake up, the kb lights flash, the mechanical hd starts to spin, and then nothing. After a couple of seconds
    the process repeats. It seems like something is timing out or there is some kind of power problem because the
    NVIDIA GPU is being used. I don't see a message because I have to reset by pulling power and battery.
    Wakeup is fine when in the Optimus mode.
    W520 4270-CTO | 2720QM | 16 GB RAM | Quadro 1000M | BIOS 1.34 | PwrMgr 3.66 | 256 SSD

  • My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

    My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

    This is usually an indication that your headphones are not plugged ALL the way in.  The white part of the headset should be flush with the body of the Nano and no silver from the headphone plug should still be seen.
    B-rock

  • Hello  i got  problem. iphone doesnt restore  even using itunes.its stuck in recovery mode and i cannt do anything with it.error 1015  is there any way to reinstall software even if itunes cannot deal with it ?

    hello  i got  problem. iphone doesnt restore  even using itunes.its stuck in recovery mode and i cannt do anything with it.error 1015  is there any way to reinstall software even if itunes cannot deal with it ?

    Usually this error occurs when trying to downgrade the iOS or in a previously jailbroken phone.  In this case, you cannot get help here.  The internet and Google are your best friends.

Maybe you are looking for