StandBy Recovery with a click?!

Hi and thanks for reading.
I have noticed that if I leave my MACBOOK PRO with Lion OS alone and let it going in energy saving mode, I need to click on the touchpad in order to recover it.
On the contrary on Snow Leopard a gentle touch on the trackpad was enough...
Is there a way to set again that nice feature?
Tnxs cheers

You can also try the java way: play around with the
ClassLoader class
ClassLoader.defineClass(String name, byte[] b, int
off, int len)Yes, doing this using the API is far better than falling back on Runtime exec. There is a class called Compiler, to which you can pass string filenames... this seems a far better solution.

Similar Messages

  • Standby Database with Recovery Manager

    Logical standby database resides on another server. some archive log files are not synced with standby database
    I want to recreate standby database with rman
    Any step by step documentation ?

    Before you recreate all and everything, try the troubleshoot hints in the document mentioned in the previous post.
    Werner

  • Logical Standby Database with 10g+ASM on both sides??

    Hi out there,
    is there a known way to establish a logical standby database on 10g, if both
    sides are running with an ASM setup?
    I've tried to create one out of a physical standby database (which is set up
    and running w/o any problems), like a book suggested me to do.
    The procedure was:
    1. switch on supplemental logging
    2. prepare initiation parameters (for archive logging etc.) on both sides for
    logical stb.
    3. shut down the phyiscal standby
    4. alter database create logical standby controlfile as '<path>'; on the
    primary, transfer the controlfile to the standby db. Here I had to use RMAN
    to copy the controlfile into the ASM System, and modify the initfile/spfile
    in order to use the controlfile. No problem so far.
    5. mount the standby database, alter database recover managed standby database
    disconnect; -> At this point, the alert log complained about non-available
    datafiles.
    6. alter database activate standby database; --> fails ("needs recovery") due
    to last point.
    The trouble is, the controlfile created at point 4 cointains wrong paths to
    the datafiles. Since I can not have the same disk group name on the standby
    system, and since ASM renames the stored datafiles by its own, the complaints
    of point 5 are comprehensible, but nevertheless annoying.
    I tried to backup a controlfile to trace and change the paths, but at after
    mounting the standby with this controlfile and proceeding at point 5, the
    system says "<path> is not a standby controlfile"
    Is there a different way of creating a "Logical Standby Database with 10g+ASM
    on both sides"? Metalink said nothing about LogStby and ASM.
    Best regards and thanks in advance,
    Martin

    I'm not sure if this will work but try:
    1. create trace control file (you did it)
    2. change paths (you did it)
    3. recrate control file (you did it)
    ... there was error occured during mount before
    so mount database (not as standby)
    4. create standby control file (from recreated control file)
    5. shutdown instance, replace control file with new standby control file or replace the control filename in parameter file.
    6. mount as standby
    What happend?
    Update: Tested on my side and it has worked fine... How about you?
    Message was edited by:
    Ivan Kartik

  • Standby Database with Standard Edition

    Hi All,
    I'm attempting to setup a Standby database with Oracle 10g Standard Edition. I must manually copy over the archive logs to my Standby database server because i'm using Standard Edition.
    Once my primary database archive logs have been copied over to the standby location shouldn't the database automatically apply those archive logs? I have issued the "alter database recover managed standby database disconnect from session" so my understanding is that it is in recovery mode and shoudl be finding the archive logs to apply. Can anyone confirm that this configuration should work with Standard Edition and perhaps point me in the right direction, which parameters in the init file to check, to get my standby database to apply these archive logs automatically.
    Thanks,

    To quickly determine the level of synchronization for the standby database, issue the following query on the physical standby database:
    SQL> SELECT ARCHIVED_THREAD#, ARCHIVED_SEQ#, APPLIED_THREAD#, APPLIED_SEQ#
    2> FROM V$ARCHIVE_DEST_STATUS;
    ARCHIVED_THREAD# ARCHIVED_SEQ# APPLIED_THREAD# APPLIED_SEQ#
    1 947 1 945

  • Recovery with disk

    I bought my HP desk top last year, It stopped working a few weeks ago.  I called HP and ordered a recovery package. I got 4 disks, 3 for recovery.  I put first one in and booted, and then all three disk in one by one as requested.  (Everything seems fine. I did all the hard ware tests all passed OK.) 
    After a few time restart the windows 7 automatically, the window 7 started the final one time set up,with blue screen tell me it will take a long time and don't disturb.  that set up keep running for a long time but never stop, just keep going.  I waited till two this morning it is the same and the blue screen with 3 green squares moves again and again.  So I went to sleep.  after I got up this morning it was the same.  I tried again, booted with the recovery disk and checked all the test once more, every thing passed fine as before.
    I rerun the recovery disk and same ting happens again, the finalizing set up won't stop.  what can I do?  Since I bought it over a year already, I need some help.  any help will be highly appreciated.

    Hello 1203ccc, You might try to run the HP Restore Recovery from the hard drive D: Factory partition, and see if the system will restore.
    To do this, when the system boots and the HP Logo screen appears, start tapping the F-11 key and the HP Recovery Restore Utility may start. If it does, select the destructive method and the hard drive will be formated and wiped clean and the Recovery process should proceed.
    It is always possible you could have a faulty hard drive that is preventing the system recovery.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Error message after Recovery with discs

    I have a Pavilion dv6911om. I had to replace the hard drive and then did a system recovery with the discs sent by HP but it failed to recover the computer. It gives me a CTOERROR.flg notepad with a bunch of information on it and from what I can tell it will not finish because my computer is offline but I have the wireless slider in the on position. HELP  - what is my next step?

    Try restarting the laptop and tapping away at the F11 key to see if the Recovery partition on the hdd was created and maybe capable of completing the install.
    If no joy,scroll down on the page and get Partition Wizard Bootable CD ISO and ImgBurn to burn the iso image to cd and boot from it. Delete all partitions, create one and format. Next try booting from Recovery Disks again.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Managed Standby Recovery not active

    Dear All,
    My database version is:
    SQL> select banner from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    OS:RedHat 5.5
    My current configuration is:
    We have two node RAC primary database and a local standby database.
    And TWO NODE RAC DR (REMOTE)STANDBY DATABASE
    while checking (REMOTE WHICH IS TWO NODE RAC)dr synchronization we found archive since yesterday has not been applied.
    But local dr is fully sinc with the primary database.
    When i have executed 'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL' it says
    SQL> alter database recover managed standby database cancel;
    alter database recover managed standby database cancel
    ERROR at line 1:
    ORA-16136: Managed Standby Recovery not active
    I manually copied the archive log which where missing in the remote standby database and then register those archive log.
    after that when i manually tried to recover the standby database it has given me following error.
    sql>recover automatic standby database;
    ORA-00283: recovery session canceled due to errors
    ORA-01124: cannot recover data file 1 - file is in use or recovery
    ORA-01110:data file 1: '/database/ctmis/system01.dbf'
    please please help me to resolve the issue.
    Thanks and Regards
    Monoj Das

    according to my understand
    Node1,Node2 is having node1-standby node2-standby in RAC environment right?
    on which node logs ur trying to apply on which node standby? (node1 ==>node1-standby or node2 ==>node2-standby)
    check it...hope it will work or not sure :)
    standby side...
    rman target /
    RMAN>crosscheck archivelog all
    then try to recover..will see ..
    if not
    check with support.oracle.com through SR.

  • Physica standby recovery problem

    Hi,
    I am trying to recover physical standby database manually
    I am getting below error:
    alter database recover standby database parallel (degree 32);
    alter database recover standby database parallel (degree 32)
    ERROR at line 1:
    ORA-01153: an incompatible media recovery is active
    I have tried to cancel managed recovery, but no managed recovery is active.
    alter database recover managed standby database cancel;
    alter database recover managed standby database cancel
    ERROR at line 1:
    ORA-16136: Managed Standby Recovery not active
    select distinct recovery_mode from v$archive_dest_status;
    RECOVER
    IDLE
    Please help me to resolve this. Thanks in advance.
    regards,
    Narendra

    Apparently this is bug 5084496, related to parallel recovery on 10.1 and below (ML note 361883.1). You may avoid this bug if you don't use parallel recovery. It looks like there are no one-off patches available, so you are stuck with either serial recovery or upgrade to 10.2 or higher :-(
    Regards,
    Jeremiah Wilton
    ORA-600 Consulting
    http://www.ora-600.net

  • DR Full recovery with issue.

    Hello Experts,
    I need you help and assistance for one requirement.
    We are having DC-DR Setup on oracle database 10g with Physical Standby database with MAXIMUM PERFORMANCE mode.
    On Primary System, our Redo log files and Control files are mirrored on 2 different Storage let’s take it a Storage A and Storage B.
    -> 4 Redo log groups 2 Files in each group one on Storage A and one in Storage B.
    -> 3 Control Files 2 on Storage A and 1 on Storage B.
    Scenario:
    In above case,
    Suppose my storage A will crash and some changes which are in redo log files, which not yet archived will failed to apply on standby database which may result in DATA LOST.
    As I told you that we are having mirror copy of Redo Log and control file on Storage B, so is it possible to RECOVER my LOST data on standby database with help of Redo Log file
    and Control file of Storage B?
    Question 1: Is it possible to apply redo log files of primary site to standby site?
    Question 2: Is it possible to do full data recovery using redo log file and control file of primary database on standby site?
    I need your help and assistance to get answer on above questions.
    Thanks

    Hello;
    Question 1: Is it possible to apply redo log files of primary site to standby site?Not in Oracle 10. In Oracle 11 The ALTER SYSTEM FLUSH REDO SQL statement can be used at failover time to flush unsent redo from a mounted primary database to a standby database, thereby allowing a zero data loss failover to be performed even if the primary database is not running in a zero data loss data protection mode.
    Question 2: Is it possible to do full data recovery using redo log file and control file of primary database on standby site?The simple answer is no. During a failover the Primary is unavailable. The standby becomes Primary and opens with resetlogs.
    Upgrade to Oracle 11 and you have more options. If the Primary is damaged this bad you do a failover.
    Best Regards
    mseberg

  • Plz Help, i downloaded ios8 on my 5s and it went to recovery mode after clicking installation.then downloaded by itunes and loaded but cant find my apple ID as i forgot everything. the phone is useless and cant be activated. wot can i do????plz help

    Plz Help,
    the last night  i downloaded ios8 on my 5s and it went to recovery mode after clicking installation.
    then downloaded the ios8 using itunes and loaded but cant find my apple ID as i forgot everything.
    the phone is useless and cant be activated. wot can i do????plz help

    Apple has a number of ways to help you find your Apple ID and password:
    https://iforgot.apple.com/appleid
    If you forgot your Apple ID password
    Apple ID: Contacting Apple for help with Apple ID account security

  • My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    That sounds horrible. There are a number of reasons it could occur.
    The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • What html code will start an EXE (program) with a click on a webpage link?

    The code in bold below worked. After I switched my browser from IE 11 to Firefox to get the hover on hotspots to work, the program gave me this error message. I moved the EXE file to my local file folder and tried it as shown below. Still no success. Any suggestions?
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <title>Family Tree Charts</title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><style type="text/css">
    <!--
    body,td,th {
        color: #000;
    -->
    </style></head>
    <body link=blue vlink=blue>
    <table width="100%" height="25" border="0" cellpadding="4" cellspacing="0">
      <tr>
        <td width="93%" height="27" bgcolor="#EFEFEF"> <div align="center"><font color="#999999">
        <b>This Software Allows You To Review Neat Charts of Your Family Tree </b></font></div></td>
        <td width="7%" bgcolor="#CCFFFF"> <div align="center"><A href="Mementos_Menu.html"><font size="2">Back</font></a></div></td>
      </tr>
    </table><BR><center>
    <br>
    <FONT color=#ff00ff><strong>Click the link below to download a special software program for your PC.</strong></FONT><br>
    <br>
    <a href="http://jdmcox.com/"><strong>Cox Website</strong></a><br><br>
    <strong>ITEM 1</strong> (AT THIS  WEBSITE) IS  THE <strong>FAMILY TREE CHART</strong> PROGRAM.<br>
    It is called <strong>Simple Family Tree</strong><br>
    <table width="80%" border="2" cellspacing="2" cellpadding="2">
      <tr>
        <td width="49%" align="left" valign="top"><FONT color=#ff00ff><strong>Click the link below to use this special software program after you download and install the program.</strong></FONT><br>
    <br>
    <!--<a href="C:\Program Files (x86)\Simple Family Tree\Simple Family Tree.exe"><strong>Family Tree Charts Program by Doug Cox</strong></a><br><FONT color=#ff00ff>
    -->
    <a href="C:\Users\Tom and Polly\Documents\Genealogy CD\Simple Family Tree\Simple Family Tree.exe"><b>Family Tree Charts Program</b></a><br><br>
    <FONT color=#ff00ff><strong>Click  the &quot;run&quot; button for both warning messages.<br>
    Click the &quot;READ THIS!&quot; menu option when the program opens.<br>
    Click  "X" in the upper right to close the program.<br><br>
    You can update the family data in future years with this program too.</strong></FONT>
    <br></td>
        <td width="51%" align="left" valign="top"><FONT color=#ff00ff><strong>NOTE 1: Be sure your HTML code for this webpage has a proper line to link to the location where the software was installed. You can use NOTEPAD to make HTML code changes. My existing line is: </strong></FONT><br>
          "c:\<u>program files (x86)</u>\simple family tree\simple family tree.exe"<br><br>
          <FONT color=#ff00ff><strong>The underlined portion will need to agree with where the program was installed. Just change the directory (see underlined sample above). Good luck. If I am still living, call me.<br><br>
          NOTE 2: After you download, install, and try to use the program, you may get an error message window that looks like this -&quot;0 FAMS @F191 @ FAM&quot;. This means you have an individual record in your GEDCOM file that does not have a parent. Be sure all GEDCOM records have at least one parent even if you must name the parent UNKNOWN.</strong></FONT></td>
      </tr>
    </table>
    <br></center> 
    <table width="100%" border="0" cellpadding="2" cellspacing="0" bgcolor="#CCCCCC">
        <tr>
          <td bgcolor="#EFEFEF"> <font size="2">&copy;2002 Sales and People</font></td>
        </tr>
    </table></body>
    </html>

    Herbert:
    Here is my latest code attempt, but I get messages about the lines in BOLD that I do not understand.
    Perhaps you will see what I need to fix. Sure appreciate what you have found and shared with such a neophyte (aka dumbo).
    Tom
    <!--
    body,td,th
    -->
    function RunExe(path) {
    try {
    var ua = navigator.userAgent.toLowerCase();
    if (ua.indexOf("msie") != -1) {
    MyObject = new ActiveXObject("WScript.Shell")
    MyObject.Run(path);
    } else {
    netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
    var exe = window.Components.classes['@mozilla.org/file/local;1'].createInstance(Components.interfaces.nsILocalFile);
    exe.initWithPath(path);
    var run = window.Components.classes['@mozilla.org/process/util;1'].createInstance(Components.inteinterfaces.nsIProcess);
    run.init(exe);
    var parameters = ["/c start Simple Family Tree.exe"];
    run.run(false, parameters, parameters.length);
    } catch (ex) {
    alert(ex.toString());
    This Software Allows You To Review Neat Charts of Your Family Tree
    Back
    Click the link below to download a special software program for your PC and your GED file.
    *Cox Website*
    ITEM 1 (AT HIS  WEBSITE) IS  HIS FAMILY TREE CHART PROGRAM.
    It is called Simple Family Tree
    Click the link below to look at my GEDCOM file contents.<br>Instructions are provided in the READ THIS menu option at the top of the window.
      *Show Yarnall Chart*
    *Return to this webpage by clicking on the backarrow after looking at the chart.
    You can update the family data in future years with this program too.*
    ©2002 Sales and People
    Date: Thu, 2 Jan 2014 02:09:18 -0800
    From: [email protected]
    To: [email protected]
    Subject: What html code will start an EXE (program) with a click on a webpage link?
        Re: What html code will start an EXE (program) with a click on a webpage link?
        created by Herbert2001 in Dreamweaver support forum - View the full discussion
    Perhaps this might be helpful:
    https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/
    It allows executables in Firefox to be run - it is an extenstion, though, so it must be installed in Firefox before your page will work.
    Another option is this solution, but it will still require a manual change in Firefox:
    http://forums.mozillazine.org/viewtopic.php?f=19&t=803615
    Or this: http://stackoverflow.com/questions/6472435/running-exe-in-firefox-why- do-i-get-an-error
    However, you will still have problems with getting it to work cross-browser. Honestly, browsers are not supposed to have access like that to the client side file system, which absolutely makes sense for the web.
    That is why you may have to approach the solution from a different angle - perhaps create a server side cloud version of your application(s) which can be easily accessed and run by your family members. I believe you used C to develop the applications? Although I have no experience with this framework, Wt might be a solution to convert your projects to server side applications:
    http://www.webtoolkit.eu/wt
    Good luck!
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972893#5972893
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972893#5972893
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972893#5972893. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

    I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
    How do I get version 4 to do this?
    Thanks.

    The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
    1) type in longer strings that narrow the search
    2) use an add-on to search just the beginnings:
    https://support.mozilla.org/en-US/questions/1037469
    3) install an older version of TB:
    http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

  • Open file from table with double click

    Hi all,
    I use adf faces and JDEV 11.
    I want to open a file by double clicking on row in a table. (file is stored in the database).
    I first tried it with a button to open the file, with this code:
           System.out.println("Double click!");       
           BindingContainer bindings = this.getBindings();
            DCIteratorBinding iter = (DCIteratorBinding)bindings.get("XxahelpBezoekRapDocView1Iterator");
            Row row = iter.getCurrentRow();
            FacesContext fc = FacesContext.getCurrentInstance(); 
            HttpServletResponse response = (HttpServletResponse)fc.getExternalContext().getResponse();
            response.setHeader("Content-Disposition","attachment; filename=\""+row.getAttribute("Filename").toString()+"\"");
            response.setHeader("cache-control", "no-cache");
            try {
                InputStream in;
                in = ((BlobDomain)row.getAttribute("Bijlage")).getInputStream();
                ServletOutputStream out = response.getOutputStream();
                writeInputStreamToOutputStream(in, out);
                fc.responseComplete();     
            } catch (IOException e) {
                e.printStackTrace();
            } This is working fine.
    Now I wan't to open the file with double clicking on a row.
    For opening the file I use the same code in the backing bean and this code on the page:
          <f:facet name="metaContainer">
        <af:group>
            <trh:script>
               goEditRow = function(event) {
                    AdfCustomEvent.queue( event.getSource(), "doubleClickOnRow", {}, false);
            </trh:script>
        </af:group>
        </f:facet>And a clientListener and serverListener on the table:
    <af:clientListener method="goEditRow" type="dblClick"/>
    <af:serverListener type="doubleClickOnRow" method="#{backingBeanScope.backing_pages_EditTicket.doubleClick}"/>The only thing that happens when I double click is that I see "Double click!" in the console. But I can't save the file :S
    What is the problem?
    Thanks in advance.

    Hi
    What we do is to pick a table column for downloading the file.
    We change the component in the column to the an af:commandLink and add an
    af:fileDownLoadActionListener to the command link.
    The user clicks on the link to download (open) the file.
    Its not exactly the same as what you requested (double
    click on the row) but it might be another solution.
    Regards
    Paul

  • Unable to close open apps with double clicking the button and when I tap screen does not respond?

    Cannot not close open apps with double clicking the button Since downloading iOS8.

    What happens when you try? Does double clicking the ?home button bring up the Task Bar of recently used apps? If so what happens when you flick up on the preview screen for the app you want to close?
    To quit an app double click the Home button to reveal the row of recently used apps. Flick up on the page preview and it will fly away and disappear. That quits the app.

Maybe you are looking for

  • Erro Faturamento/NF - Saldo em moeda da transação

    Durante a configuracao do cenario de transferencia de estoque por MM/SD , na hora de fazer a SM que ia gerar a NF acontecia o erro abaixo: Saldo em moeda da transação Nº mensagem F5702 Diagnóstico Ocorre um saldo na moeda de transação 'BRL': Categori

  • Transaction rolled back when system exception occurs.

    Hello, I understand that when a exception occurs that extends RuntimeException or RemoteException, the current transaction is rolled back. Is that also the case when the system exception is caught and dealt with? Julien Martin.

  • Activate BI content

    Hey guys, i tried to acitvate the BI content using the activity in SPRO but not even the simulation worked fine. The job crashed with an ABAP DUMP and the message Name: OBJECTS_OBJREF_NOT_ASSIGNED_NO Exception: CX_SY_REF_IS_INITIAL method: CL_RSO_TLO

  • Performance slow on DELETE command on global temporary table!

    Hi, I have a delete on a global temporary table that is taking long time!. Anyone have a clue about how to improve delete command's against global temporary table?? Tks, Paulo Portugal

  • Finder piles pics in a jumble when showing items as icons

    Searching my photos in Finder can be a blessing or a confusing mess. If I search using the list feature, everything is fine and dandy, just like when i use columns A problem arises when I use icons in some folders. Let's say i click on folder ABC in