Start weblogic in debug mode
Hi,
I want to start weblogic in debug mode.
Do you know what modifications should be made in the default configurations?
-John
John wrote:
Hi,
I want to start weblogic in debug mode.
Do you know what modifications should be made in the default configurations?
-JohnWebLogic Server doesn't have a debug mode. Are you trying to see debug
messages in the shell window where you started the server?
~Ryan
Similar Messages
-
Error when starting Weblogic in debug mode
Hi there
Has anyone experienced any difficulties when starting weblogic in debug mode.
More specifically, it cannot start correctly because it thinks that another instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unable to create
a server socket for port: 8320. java.net.BindException: Address already in use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic
Server is no longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Server shutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Server shutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)Thanks for the suggestion.
Unfortunatley the port is definately free/available during startup.
Stephane Kergozien <[email protected]> wrote:
Maark,
Before starting your server, please could you check that the port is
not used by one
other process. You can use the netstat command to do this.
Regards
Stephane
Mark wrote:
Hi there
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address alreadyin use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <TheWebLogic
Server is no longer listening for connections. You should probablyrestart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdownsequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Servershutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unableto load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)--
Regards,
Stephane Kergozien
BEA Support -
How to start weblogic in debug mode ? and how to set the eclipse in the deb
how to start weblogic in debug mode ? and how to set the eclipse in the debug
Put this in JAVA_OPTIONS :
Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,address=3999,suspend=y,server=y
After restarted weblogic, in eclipse set your breakpoint , open debug perspective then choose Remote Java Appliction and configure Connection Properties (host=localhost and port=3999) -
Help! Starting Weblogic in Debug Mode
Hi there
Any clues/suggestions are greatly appreciated.
Has anyone experienced any difficulties when starting weblogic in debug mode.
More specifically, it cannot start correctly because it thinks that another instance
is using the same port (definately not the case).
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unable to create
a server socket for port: 8320. java.net.BindException: Address already in use
Perhaps another process is using port 8320.> <Mar 18, 2002 7:42:32 AM GMT+10:00>
<Notice> <WebLogicServer> <SSLListenThread listening on port 8321> <Mar 18, 2002
7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic Server is no
longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Server shutdown
has been requested by system> <Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer>
<The shutdown sequence has been initiated.> <Mar 18, 2002 7:42:32 AM GMT+10:00>
<Info> <WebLogicServer> <Server shutdown is commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O. java.lang.ThreadDeath at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764) at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171) at weblogic.Server.main(Server.java:35)The following error has nothing to do with running in debug mode?
It just means that there's another process already binded to port 8320
you might want to see the output of netstat -a
BTW, what flags you switched on to run the server in debug mode?
Kumar
"Mark" <[email protected]> wrote in message
news:3c951474$[email protected]..
>
Hi there
Any clues/suggestions are greatly appreciated.
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address already inuse
Perhaps another process is using port 8320.> <Mar 18, 2002 7:42:32 AMGMT+10:00>
<Notice> <WebLogicServer> <SSLListenThread listening on port 8321> <Mar18, 2002
7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic Server isno
longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system> <Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert><WebLogicServer>
<The shutdown sequence has been initiated.> <Mar 18, 2002 7:42:32 AMGMT+10:00>
<Info> <WebLogicServer> <Server shutdown is commencing NOW and isirreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable toload
performance pack, using Java I/O. java.lang.ThreadDeath atjava.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764) atweblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171) atweblogic.Server.main(Server.java:35)
>
> -
How to start weblogic in debug mode from BEA WebLogic Eclipse plugin
I have a problem making weblogic work with eclipse3.1. I am using a BEA WebLogic plugin to handle weblogic (start/stop) from eclipse. However I want to debug my application and I am unable to figure out a way to start my weblogic in debug mode like we do in WSAD. I tried using some other plugins also but no luck. Please suggest me a plugin to handle this or any other way of debugging my application from eclipse. I am using weblogic 8.1.
Hi,
Dev Environment
weblogic eclipse plugin 2.0 beta
weblogic server 8.1
eclipse 3.1.1
Created a server that i would like to deploy my EJB so that i can put break points on my EJB in eclipse.
How do i do it?
I managed to deploy an ear (containing the ejb) directly to the weblogic installed folder and it deployed the ejb. But the breakpoint set in eclipse is not triggered. Of course in this case as weblogic server is running the .ear file deployed manually in the file system.
Any help is appreciated.
Mel -
Portal down after starting Server in debug mode
I have started my AS Java in Debug Mode. Now, the Portal is down, shing the following error message:
503 Service not available
Error: -6
Version: 7010
Component: ICM Java
Date/Time: Mon May 26 11:39:28 2008
Module: http_j2ee2.c
Line: 1136
Server: SV-SAP-5_CES_01
Error Tag: {00000a45}
Detail: ICM running but no server with HTTP connected - Load Balancing failed
Why is that?
Thanks, JJJIt takes time till the server is running again. Wait a few minutes and try again!
-
OC4J - Starting container in debug mode
When the container is started in debug mode, start-up messages are referring
to XAtransactions. This is causing a bit of confusion as we?re not using
distributedtransactions. Is this an internal message ? The message is:
Null: Connection XAXA Orion Pooled jdbc_oracle:thin:10.106.50.18.1521:EAGRI
allocated (pool size+ 0) .
Any help would be appreciated.already using it. Any other suggestions?
"Simon Spruzen" <[email protected]> wrote in message
news:3b407dc6$[email protected]..
>
Try starting the jvm with -classic, if you're using the hotspot vm.
"Chris Bick" <[email protected]> wrote:
If I start weblogic6.1beta in debug mode the CPU pegs at 100% for about
4-5
minutes before it starts. Anyone else seen this?
-cb -
Devloper system configuration (weblogic in debug mode on Eclipse/windows)
Hi,
I work on a project, which we may consider as big. Couple of thousads of java files, muilti-tired. We use, weblogic in eclipse on widows for development. Curreltly we have 1G ram on each of developer mechines. But most of us are complaining that, system is running slow in debug mode. Sometimes, we can't even work.
I greatly appreciate if somebody can point me to the URL or suggestion for good system configuration, so that we can work comfortably.
Just asking to increase the RAM may not help me in convencing the business/management. If there any specific recommandations by either by BEA or IBM (eclipse), that helps me a lot in raising the same to our buisness.
Greatly appricate your suggestions
Reg,
MahiHi Bigmachini,
According to my solution, what about your issue now?
If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
If not, please let us know the latest information about it.
@Malik, could you please tell me if you try to check your issue by the above suggestion as I said?
If no, please try the above suggestions to check this issue and then tell me the latest message about this issue.
>>The error mostly occurs when debugging ADO.NET or database function calls. If code is run without debugging then there is no issue at all.
You could also try to copy your project and then debug your project in debug mode on a another machine you install same Windows 10 OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Starting welogic in debug mode takes 5 minutes to start
If I start weblogic6.1beta in debug mode the CPU pegs at 100% for about 4-5
minutes before it starts. Anyone else seen this?
-cbalready using it. Any other suggestions?
"Simon Spruzen" <[email protected]> wrote in message
news:3b407dc6$[email protected]..
>
Try starting the jvm with -classic, if you're using the hotspot vm.
"Chris Bick" <[email protected]> wrote:
If I start weblogic6.1beta in debug mode the CPU pegs at 100% for about
4-5
minutes before it starts. Anyone else seen this?
-cb -
Starting Server in Debug Mode - Need Some Advice Plz.
Hi Guys,
I have an EP SP 12 Server Running and I am trying to Start the Server in Debug mode from the Netweaver Developer Studio but when I right click the Server and try to choose Debug, the option is greyed out and even while viewing the Debug option from the SAPMMC I see that under the column Debug, it say 'Disabled' for the Server and Dispatcher.
Can anyone suggest how this can be done, I would appreciate any help as I have been working on this for some time.
Best Wishes,
John.
Message was edited by: John Bray
Message was edited by: John BrayHi John,
If the you cannot start the server in the debugging mode through the NWDS then you can try the other way round.
<b>Through Config Tool:</b>
You can enable the debuggine mode from the Config Tool as well. Just visit the following path :
<b>C:\usr\sap\<SID>\JC<SYS_NO>\j2ee\configtool\configtool.bat</b>
Click on the your instance. Then under the tab VM Environment, Set the <b>DebugMode = true</b>.
Restart the engine now. This will open the J2EE server again in the Debug Mode.
I hope this helps you!!
Regards
Pravesh
PS: Please conside rewarding points if helpful and solved. -
How to start server in debug mode by default
Hi,
Whenever the server starts it does not start in debug mode.
One has to manually start the "SDM" and "Server0" in the debug mode.
Is there a way I can make the server start in debug mode for the first time itself.
regards,
SaurabhHi Saurabh,
You can start the server in debug mode using config tool. Just open cofig tool (/usr/sap/<SYS ID>/JC<SYS NR>/j2ee/configtool/configtool.bat).
Click on the your instance. Then under the tab Servers Debug check Debuggable and also Enable Debug mode.
Restart the engine now.
However a word of caution: Starting the server in debug mode decreases the system performance. You should only start the dev server in debug mode.
Hope this helps.
Regards
Sidharth -
Problem with starting Tomcat in debug Mode, Win XP
Hi,
if i go to cmd and C:\Program Files\Apache Software Foundation\Tomcat 5.0\bin
and write: catalina jpda start, it says
C:\Documents and Settings\bartek>cd C:\Program Files\Apache Software Founda
C:\Program Files\Apache Software Foundation\Tomcat 5.0\bin>catalina jpda start
Using CATALINA_BASE: C:\Program Files\Apache Software Foundation\Tomcat 5
Using CATALINA_HOME: C:\Program Files\Apache Software Foundation\Tomcat 5
Using CATALINA_TMPDIR: C:\Program Files\Apache Software Foundation\Tomcat 5
Using JAVA_HOME: C:\j2sdk1.4.2_09
C:\Program Files\Apache Software Foundation\Tomcat 5.0\bin>
And it finishes.... Server is off
If i write: catalina start , new Tomcat window opens and the server starts
This is my catalina.bat
@echo off
if "%OS%" == "Windows_NT" setlocal
rem ---------------------------------------------------------------------------
rem Start/Stop Script for the CATALINA Server
rem
rem Environment Variable Prequisites
rem
rem CATALINA_HOME May point at your Catalina "build" directory.
rem
rem CATALINA_BASE (Optional) Base directory for resolving dynamic portions
rem of a Catalina installation. If not present, resolves to
rem the same directory that CATALINA_HOME points to.
rem
rem CATALINA_OPTS (Optional) Java runtime options used when the "start",
rem "stop", or "run" command is executed.
rem
rem CATALINA_TMPDIR (Optional) Directory path location of temporary directory
rem the JVM should use (java.io.tmpdir). Defaults to
rem %CATALINA_BASE%\temp.
rem
rem JAVA_HOME Must point at your Java Development Kit installation.
rem
rem JAVA_OPTS (Optional) Java runtime options used when the "start",
rem "stop", or "run" command is executed.
rem
rem JSSE_HOME (Optional) May point at your Java Secure Sockets Extension
rem (JSSE) installation, whose JAR files will be added to the
rem system class path used to start Tomcat.
rem
rem JPDA_TRANSPORT (Optional) JPDA transport used when the "jpda start"
rem command is executed. The default is "dt_shmem".
rem
rem JPDA_ADDRESS (Optional) Java runtime options used when the "jpda start"
rem command is executed. The default is "jdbconn".
rem
rem $Id: catalina.bat,v 1.9.2.1 2004/08/21 15:49:47 yoavs Exp $
rem ---------------------------------------------------------------------------
rem Guess CATALINA_HOME if not defined
set CURRENT_DIR=%cd%
if not "%CATALINA_HOME%" == "" goto gotHome
set CATALINA_HOME=%CURRENT_DIR%
if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
cd ..
set CATALINA_HOME=%cd%
cd %CURRENT_DIR%
:gotHome
if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
echo The CATALINA_HOME environment variable is not defined correctly
echo This environment variable is needed to run this program
goto end
:okHome
rem Get standard environment variables
if exist "%CATALINA_HOME%\bin\setenv.bat" call "%CATALINA_HOME%\bin\setenv.bat"
rem Get standard Java environment variables
if exist "%CATALINA_HOME%\bin\setclasspath.bat" goto okSetclasspath
echo Cannot find %CATALINA_HOME%\bin\setclasspath.bat
echo This file is needed to run this program
goto end
:okSetclasspath
set BASEDIR=%CATALINA_HOME%
call "%CATALINA_HOME%\bin\setclasspath.bat"
rem Add on extra jar files to CLASSPATH
if "%JSSE_HOME%" == "" goto noJsse
set CLASSPATH=%CLASSPATH%;%JSSE_HOME%\lib\jcert.jar;%JSSE_HOME%\lib\jnet.jar;%JSSE_HOME%\lib\jsse.jar
:noJsse
set CLASSPATH=%CLASSPATH%;%CATALINA_HOME%\bin\bootstrap.jar
if not "%CATALINA_BASE%" == "" goto gotBase
set CATALINA_BASE=%CATALINA_HOME%
:gotBase
if not "%CATALINA_TMPDIR%" == "" goto gotTmpdir
set CATALINA_TMPDIR=%CATALINA_BASE%\temp
:gotTmpdir
rem ----- Execute The Requested Command ---------------------------------------
echo Using CATALINA_BASE: %CATALINA_BASE%
echo Using CATALINA_HOME: %CATALINA_HOME%
echo Using CATALINA_TMPDIR: %CATALINA_TMPDIR%
echo Using JAVA_HOME: %JAVA_HOME%
set _EXECJAVA=%_RUNJAVA%
set MAINCLASS=org.apache.catalina.startup.Bootstrap
set ACTION=start
set SECURITY_POLICY_FILE=
set DEBUG_OPTS=
set JPDA=
if not ""%1"" == ""jpda"" goto noJpda
set JPDA=jpda
if not "%JPDA_TRANSPORT%" == "" goto gotJpdaTransport
set JPDA_TRANSPORT=dt_socked
:gotJpdaTransport
if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress
set JPDA_ADDRESS=8000
:gotJpdaAddress
shift
:noJpda
if ""%1"" == ""debug"" goto doDebug
if ""%1"" == ""run"" goto doRun
if ""%1"" == ""start"" goto doStart
if ""%1"" == ""stop"" goto doStop
if ""%1"" == ""version"" goto doVersion
echo Usage: catalina ( commands ... )
echo commands:
echo debug Start Catalina in a debugger
echo debug -security Debug Catalina with a security manager
echo jpda start Start Catalina under JPDA debugger
echo run Start Catalina in the current window
echo run -security Start in the current window with security manager
echo start Start Catalina in a separate window
echo start -security Start in a separate window with security manager
echo stop Stop Catalina
echo version What version of tomcat are you running?
goto end
:doDebug
shift
set _EXECJAVA=%_RUNJDB%
set DEBUG_OPTS=-sourcepath "%CATALINA_HOME%\..\..\jakarta-tomcat-catalina\catalina\src\share"
if not ""%1"" == ""-security"" goto execCmd
shift
echo Using Security Manager
set SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy
goto execCmd
:doRun
shift
if not ""%1"" == ""-security"" goto execCmd
shift
echo Using Security Manager
set SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy
goto execCmd
:doStart
shift
if not "%OS%" == "Windows_NT" goto noTitle
set _EXECJAVA=start "Tomcat" %_RUNJAVA%
goto gotTitle
:noTitle
set _EXECJAVA=start %_RUNJAVA%
:gotTitle
if not ""%1"" == ""-security"" goto execCmd
shift
echo Using Security Manager
set SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy
goto execCmd
:doStop
shift
set ACTION=stop
goto execCmd
:doVersion
%_EXECJAVA% -classpath "%CATALINA_HOME%\server\lib\catalina.jar" org.apache.catalina.util.ServerInfo
goto end
:execCmd
rem Get remaining unshifted command line arguments and save them in the
set CMD_LINE_ARGS=
:setArgs
if ""%1""=="""" goto doneSetArgs
set CMD_LINE_ARGS=%CMD_LINE_ARGS% %1
shift
goto setArgs
:doneSetArgs
rem Execute Java with the applicable properties
if not "%JPDA%" == "" goto doJpda
if not "%SECURITY_POLICY_FILE%" == "" goto doSecurity
%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doSecurity
%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doJpda
if not "%SECURITY_POLICY_FILE%" == "" goto doSecurityJpda
%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% -Xdebug -Xrunjdwp:transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=n %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doSecurityJpda
%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% -Xrunjdwp:transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=n %DEBUG_OPTS% -Djava.endorsed.dirs="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:endpaths with spaces in them are a problem. surround them with quotes and see if that helps.
why does the Java /bin appear twice?
why don't you use the JAVA_HOME variable that you set? don't repeat yourself.
% -
Hello,
I have been trying to start weblogic in debug mode, so that I can connect
to it from a distributed debbugging ide, like visual cafe. I want to be
able to do this manually. I have been using visual cafe, and while it
has a menu option for starting the weblogic server in debug mode,
it only allows this if you are working on an 'ejb project' in visual cafe.
Unfortunately, visual cafe, at this point, is so buggy, that I have
resorted to completely avoiding the ejb project wizards. I just
want to use it for compiling and debugging, but I want to only
use generic java projects, so that it doesn't try to do a bunch
of stuff, which inevitably gets it all confused.
Jason
Jason Rosenberg
SquareTrade
(remove 'nospam' from my return address)I am sorry that you are unable to get it to work. Unfortunately, the best
place for you to find information on how to use visual cafe with WebLogic is
from the WebGain team.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Jason Rosenberg" <[email protected]> wrote in message
news:[email protected]..
Hello,
I have been trying to start weblogic in debug mode, so that I can connect
to it from a distributed debbugging ide, like visual cafe. I want to be
able to do this manually. I have been using visual cafe, and while it
has a menu option for starting the weblogic server in debug mode,
it only allows this if you are working on an 'ejb project' in visual cafe.
Unfortunately, visual cafe, at this point, is so buggy, that I have
resorted to completely avoiding the ejb project wizards. I just
want to use it for compiling and debugging, but I want to only
use generic java projects, so that it doesn't try to do a bunch
of stuff, which inevitably gets it all confused.
Jason
Jason Rosenberg
SquareTrade
(remove 'nospam' from my return address) -
Remote Debug mode while starting Weblogic server using my eclipse plugin
Hi
When am starting the Weblogic server via my eclipse it is opening in Remote Debug mode. Can anyone tell me how do I change the preferences/configure so that it doesnt run in debug mode.
NOTE:I have deployed the application and ran number of times, till yesterday it wasn't starting in this mode, though I haven't changed any settings since then, it is starting in Remote Debug mode.
Thanks,The above issue is resolved by adding this to setDomainEnv.sh :
ALTERNATE_TYPES_DIRECTORY="${WLPORTAL_HOME}/portal/lib/security"
export ALTERNATE_TYPES_DIRECTORY
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.alternateTypesDirectory=${ALTERNATE_TYPES_DIRECTORY}"
# weblogic extension directories (system jars)
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/p13n/lib/system"
export WEBLOGIC_EXTENSION_DIRS
else
WEBLOGIC_EXTENSION_DIRS="${WLPORTAL_HOME}/p13n/lib/system"
export WEBLOGIC_EXTENSION_DIRS
fi
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/light-portal/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/portal/lib/system${
CLASSPATHSEP}${WLPORTAL_HOME}/info-mgmt/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/analytics/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/apps/lib/system${CLASSP
ATHSEP}${WLPORTAL_HOME}/info-mgmt/deprecated/lib/system"
export WEBLOGIC_EXTENSION_DIRS
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/content-mgmt/lib/system"
export WEBLOGIC_EXTENSION_DIRS
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
export JAVA_OPTIONS
fi -
Start Weblogic 10.3.5 in production mode
I am doing a Weblogic upgrade from 9.1 to 10.3.5.
I am also simultaneously doing a Java upgrade to 1.6.0_27.
All changes are done and the project is in in System test mode.
I have configured my Sysytem test environment in development mode and used JDk installed on my computer.
To move the changes to the UAT server, I want to start weblogic in production mode.
can anyone help me as to how will this be different,I am planning thing for UAT and production right now.
Can I run my System test server in production mode .
Is it that with production mode ,we have to use jrockit and not Sun Jdk?
Please help.
Thanks,Hi
When you started the Weblogic Server, in the starup window (or nohup output file) search for the word named like "Development". When I started my AdminServer and in the output from startup window, I could see a line like this: and in the end it says like AdminServer started in Development mode. On your side search for the word like "Production" or just "WLS Start Mode".
WLS Start Mode=Development
There should be a way to find out from Weblogic Admin Console, but I am not aware of this.
Coming to redirecting the log file(s). do you want to redirect the startup log file(s) like when you start weblogic, you want all the outputs to go to someother file. Or is it the full log files from each server which are under like domain/servers/AdminServer/logs folder. I guess from weblogic console you should be able to control this.
Coming to redirecting startup log files on Linux, under the domain root folder I created a simple file like admin_start.sh with below contents. And I run this admin_start.sh instead of startWeblogic.sh command. This takes care of starting weblogic and all output goes to specific file I mentioned. Also I can kill this window and still weblogic will be starting:
DOMAIN_HOME="/home/ravijegga/Oracle/Middleware115/user_projects/domains/myDomain1"
LOG_FILE="/home/ravijegga/Oracle/Middleware115/user_projects/domains/myDomain1/logs/admin.log"
nohup ${DOMAIN_HOME}/bin/startWebLogic.sh > ${LOG_FILE} &
The point is if you use > you can redirect to any log file. Google around and you should be able to find more examples for Windows OS also.
Thanks
Ravi Jegga
Maybe you are looking for
-
Hello all, Using SUM while running SCM 7.0 EHP3 upgrade I am getting error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC: Checks after phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC were negative! Last error code set: Single errors (code > 8) found i
-
every internet browser keeps the main page that renders when you do a search. you can click on any of the options and a new window opens. the latest version of FF i downloaded today has completely removed that feature. when you click on a search choi
-
Satellite L500 - touchpad & CD-rom are not working anymore
Dear Sir I have Satellite L500 laptop. I have problem with the touch pad and cd-rom both losses the functionality. Once I click on the touch pad cursor not moving and it button also not working. Please give me solution on it. I have try to setup by d
-
Is this expect behivour for wss10_saml_token_client_policy?
My web service attached with wss_saml_or_username_token_service_policy. My Web service client (Java SE) code using oracle/wss10_saml_token_client_policy. Without any keystore on my client side, I'm able to invoke web service without password. only th
-
Multicasting problem with MS Loopback Adapter
My IBM software dispatcher requires Microsoft Loopback Adapter on my Application Servers. Unfortunatly, multicasting does not work with MS Loopback Adapter. I am running WebLogic 6.1 on Windows 2000 Application Server. I