Started to run recovery disc assistant on a backup hard drve-stopped when it said it would erase all data-but now can't inialize the external drive nor repair it with disc utility?
started to run recovery disc assistant on a backup hard drve-stopped when it said it would erase all data-but now can't inialize the external drive nor repair it with disc utility. what to do?
Activity Monitor – Monitor Performance Problems
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information
Similar Messages
-
I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?
I guess if stolen or lost it would protect my "stuff", and if I'm travelling would protect my privacy.
You must understand the purpose and implications of encryption before deciding whether to use it.
Encryption locks your data with a password. If you forget that password, the data is lost beyond any chance of recovery. Neither Apple nor anyone else will be able to help you recover that data if you don't know the password.
By the same token, the password must be strong enough to provide the security you want. For example, if you're the potential target of industrial espionage by a government or large corporation, you need the strongest possible password. To create and manage such a password safely is a task in itself, not to be undertaken lightly.
If you're only concerned about casual snooping by someone with no special skill, a weak, easily-remembered password is appropriate.
But regardless of the strength of the password, if you lose it, the data is gone forever.
Another point to remember is that if you encrypt your data on one storage device, you must also encrypt it on all other storage devices that would be accessible to the same attacker. Otherwise the data isn't protected. For example, if you keep your computer and your backup drive in the same room, and the internal drive of the computer is not encrypted, then there's no point in encrypting the backup drive. -
Music Server Can't See External Drive Formatted for WIN with Disk Utility.
Is there any reason an external drive formatted for WIN (MS-DOS(FAT)/FAT32 or NTFS w/ NTFS-3G/MacFUSE) with Disk Utility would not work for intended purpose? I have a music server (Bryston BDP-1) that uses an attached USB drive for storage/playback of music and can only read FAT32 or NTFS formatted drives. I've tried both and neither is readable by the BDP-1, yet I have no problem reading/writing to the supplied 2GB Thumb Drive (FAT32), as well as another 2GB Thumb Drive (FAT32). Get Info shows; "FAT32" for all drives formatted as such.
Note: From what I'm told the BDP-1 uses a scaled down version of Linux for it's OS. Isn't that UNIX? Shouldn't it be compatible (Read/Write) with other platforms (i.e, Mac)? Bryston says the reason they use it because it's Open-Source. Does Linux only work FAT32 or NTFS?
I do have Fusion/XP, also access to WIN PC's, but I just hate to use it when I shouldn't have to. It makes no sense why the drive can't be read by the BDP-1 when formatted for WIN under OS X.
And there was one other issue, after the third try to format fro WIN the external drive suddenly began making faint clicking sounds instead of a spinning drive sound only when plugged into BDP-1 USB port. But it works fine when connected to iMac FW.
HW Specs:
Drive: G-Drive Mobile USB/FW 750GBExchanged drive. Works now.
-
Keep getting errors, 3014, 3194, 1600, dont know what to do? i can get it to recovery mode, but no further
Those errors suggest you aren't running the latest version of iTunes.
1. Update iTunes to the latest - 10.3.1
2. Disable ALL security apps (firewall, antivirus/spyware) running on your computer. -
Can't unmount external drive for Repair Disk on disk Utility. Any ideas?
What does it mean when Disk Utility says that a remote disk can not be "unmounted"?
I am trying to repair a 500GB external firewire drive. The other one I have connected works fine when I click repair disk.
Thank you
Verify and Repair volume “500 GB”
The disk “500 GB” could not be unmountedOpen Disk Utility, select the drive in the left side list then click on the Unmount icon in the toolbar. See if that does anything. If the drive is in use then it cannot be ejected until whatever has the lock on the drive is finished with it.
If nothing is using the drive and it simply refuses to eject then open Activity Monitor, select All Processes from the Processes drop down menu. Click on the processes column to display in alphabetical order. Look for an entry such as "disk.......", select it if it's there then click on the Force Quit icon in the toolbar.
Another alternative is to shut down the computer, disconnect the drive, then restart. -
I have an iMac and I am running out of disc space. I am considering an external drive to house my iTunes library. If I buy a second drive to operate as a back up will time machine back up the disc on the IMac and the external drive with the iTunes library?
If you have a considerable photograph and/or movie collection you may want to consider off loading those to the EHD too. Here are Apple's article showing how handle iTunes & iPhoto libraries.
iTunes: library on EHD
iPhoto: How to move the Library to EHD
Roger -
I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?
A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing! -
Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. The 'type name' space and the 'erase' button are in light grey - Could you please assist?
Hello!
Did you boot to the Internet Recovery Partition?
Here’s how:
1/ Make sure your computer is completely shut down.
2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [alt] + [cmd] + [r] Keep these keys on your keyboard pressed until you see a spinning globe with the text “starting Internet Recovery” You might have to connect to your Wi-Fi network before you can continue here.
After a few minutes, you’ll be presented with a Utilities screen. This is the Internet Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
3/ Choose Disk Utility and click [continue] -
My macbook air won't load. Says start up disk is full but I can't get the home page to open
My Macbook air won't load. Says the start up disk is full but won't open the home page so I can do anything about it
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. -
I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant. I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop
I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion Start up assistant wouldn't see my extrnal drive with the Time Machine files on it. After many tries, I skipped the restore there and let the system boot. I could see my external drive from Finder and the files looked OK. I was told to use Migration Assistant and it had the same problem.
I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD. I went ahead and told it to continue and it started to restore my apps, settings, and documents. It's been going for a couple of hours, and is close to being done. I expect to see my old system restored when it is finished.
Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
It's been a month or so since your post Did your get it to work? -
When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors. But if I boot off an external drive and check the same SSD, no errors are reported.
This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks). So far as I know, all of the kit I am using is in good order (despite the file corruption reports). So I am beginning to wonder if it could be due to a bug in Mavericks? Both SSD drives have been formatted to MacOS Extended (journaled) format. Should I have used a different format, I wonder?
Has anyone else encountered this issue?
Does anyone have a solution?
Or an explanation that might help my investigation of the issue?
Thanks guys,I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs.
I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try. -
i've jail break Iphone 3GS. i tried to restore setting (erasing all data and media) without connecting to computer/itunes. When it starts it freezes by showing apple logo only. what is the solution. please help me out. Here i don't have iphone service center too.
Although not illegal, Apple discourages a user from modifying the iPhone OS in any manner, including "jailbreaking". Apple feels so strongly about this that discussing methods to assist a user trying to either jailbreak or "unjailbreak" an iPhone are prohibited.
-
My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!
you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/ -
My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
doesn't support this base station...
I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
Thank's for your help,
MikeUse AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536 -
My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?
Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
Apple probably does want you to buy a new AirPort Extreme.
The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion. This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
Maybe you are looking for
-
I´ve been asked to make a chinese version of a website but although I can create the pages using chinese characters I can´t make the urls or folders in chinese. eg 住宿.asp What should I be doing ?
-
Method add_function does not display icon in toolbar
Hi, as described in the subject of this post I have a problem with the method add_function of class cl_salv_functions_list. My intend was to add several buttons in the toolbar of the ALV grid. Adding of these buttons is functional but there is no ico
-
Hey all, I work in a iMac computer lab in a university here in the city. We just got new iMac computers, but their native resolution is different than the existing projector. Is there a script, program, or other way to create an icon that teachers ca
-
Mail button is stuck. Wont launch ...... pinwheel spins and spins ..... any suggestions
-
What is the best way to support both a Z22 and a Lifedrive on Windows XP? It seems like there are two options. One would be to install only desktop 4.1.4E which supports both, but is not the recommended version for the Z22. The other would be to in