Starting with version 32.0 of Firefox, 1Password text boxes do not show the typed text.

The 1Password plugin for Firefox prompts users to enter new passwords as they are created. Starting with version 32, however, the text box still appears, but no cursor appears in the text box, and no type is visible as I type. The typed entry is posted to 1Password, but it must be checked to ensure that there were no typos (since the type was not visible as it was entered). Is there a fix for this "invisible type" problem?

I appreciate your response, but 1Password has no new release that might solve the problem -- a problem, to be honest, that I don't think is theirs.
Firefox has become increasingly prone to rendering errors, and this may be just another one. Sites that display properly in Safari and Chrome are a mess in Firefox, and every day brings me closer to switching to another browser.
Whether there's code specific to Firefox that developers, because of Firefox's declining popularity, aren't including or Firefox isn't incorporating the latest standards, I don't know. But I do know that I now need to open other browsers throughout the day because Firefox is no longer the reliable resource it once was.

Similar Messages

  • "InfoObject" with Text data is not showing description/heading/text in IDT...

    Dear All,
    I'm working on SAP NetWeaver 7.3 and I have an InfoCube for QM and recently I had a requirement to add an "InfoObject" which will show text. I added it into InfoCube and after loading my transaction data, I could see the text of newly added  InfoObject as well on "LISTCUBE" transaction. I refreshed the "Data Foundation Layer" on BO tool "Information Design Tool" and also inserted Candidate InfoObject (my newly added InfoObject"). But when I tried to show its values for "InfoObject" its showed me its values. But when I tried to show its text (heading) it threw following error:
    1. Firstly, I could not find Text Table or table for the newly InfoObject into "Data Foundation Layer" why?
    2. Why am I getting able error?
    3. Have I missed some step in BW which is causing an issue for not "Generating SID" for this InfoObject "Master Data Text"?
    4. How to resolve the above issue as I want to show its text into "InfoSpace" or BusinessObject Explorer?
    Many thanks!!!
    Tariq Ashraf

    Problem with JMS IKM of 10.1.3.5 for Hp-UX.
    Step 3 of IKM, where its truncating the schema, the systntax is wrong. The correct syntax will be.
    truncate schema < %=odiRef.getInfo("SRC_SCHEMA")%>

  • When firefox is minimalized, it does not show the number of new emails in my inbox

    Using Windows 7 on an HP Pavillion dv6-3225dx Entertainment PC

    Thanks for the help. The only one which worked was Gmail Watcher which does not change the icon. But it provides similar functionality by creating a periodic message visible at the bottom left of the screen telling me how many unread emails are in my inbox.
    The ones I tried which did NOT work were:
    Gmail notifier by Kang;
    Gmail Manager by Long
    Gmail Checker by Nguyen; and
    Gmail Favicon Notifier by Pendelton.

  • Install problems starting with version 11 no current owner of object in programData directory

    What I have found starting with version 11 of iTunes is that their is no owner of the object : C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\x64   you get the following when you try and look at the permissions of this object: "Unable to display current owner." This is one of the directories that is installed when you install iTunes.  When you try and look at this directory you do not have access rights even if you or the Administrator !! This is a bug in your install program and the only fix is to completely remove iTunes and go in safe mode and delete this directory and then reinstall.  Works find untill you come up with another update and you will have to do this all over again because when this directory path is created it does not have a owner of administrator so it can never be updated since the install program or anyone else in that matter can get access to this directory.  So you will fail the install everytime.  Please fix !!!

    More infomation:  I am running on a Lenovo H330 with Window 7 Home Premium w/service pack 1 and all patches applied. 
    Intel i5-2500 CPU @ 3.GHz 3.30GHz (dual core)
    8 GB memory
    64 bit Operatin System
    I have also ran the following helps from K Gazow: https://discussions.apple.com/message/20920363#20920363?ac_cid=tw123456#20920363
    This did not help I am still getting the following error:
    Now if you go into that same dir path you find that after doing the proceedure that K Gazow suggested and rerunning iTunes64Setup.exe (ver 11.0.2) it went in and deleted the x64 directory.  Thats is why I am getting this error now.
    When I click on "OK" it will try and backout the install and then I will get the following error:
    You go to see if that path is there and it is not, their is no Installer\ path under C:\windows\
    So now it looks like I will have to remove iTunes again and reinstall will update when I have that done.

  • Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

    Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
    Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

    Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
    Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
    Make sure SD DVD is selected:
    (If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
    Build your DVD and you'll be fine.
    Patrick
    P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

  • I downloaded the new version of firefox, now my flash player wont work, the html text box is gone and so is the back and forward buttons. please help??

    I downloaded the new version of firefox, now I cant watch any movies, the html text box is totally gone, and so is the back and forward website buttons, please help? can i just have the old version back?

    Not sure whether for instance you initially had a Yahoo optimised version of Firefox, and have now overwritten it with an official Mozilla version. Although the Mozilla version should NOT add unwanted features, but the Yahoo version may well do.
    If you merely need to find the Yahoo emails page quickly just add it as a bookmark or as a bookmark on the Bookmarks toolbar and make sure that is visible.
    Clicking the star icon on the location bar whilst looking at your emails will bookmark the page.
    * [[How to use bookmarks to save and organize your favorite websites]]
    * [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window]]
    I do not use Yahoo myself,and am not sure what add-ons are available. You could search yourself using
    * FirefoxButton -> add-ons
    ** see [[Find and install add-ons to add features to Firefox]]
    ** examples [https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/ yahoo toolbar] & [https://addons.mozilla.org/en-us/firefox/addon/yahoo-mail-notifier/ mail notifier]
    * also look at Yahoo's own information such as http://help.yahoo.com/tutorials/toolbar/cl3/c3_ff_toolbar1.html

  • HT1338 I have an iMac with version 10.5.8 Mac OS X, can i upgrade to the latest Mountain Lion S X from the Apple web page.

    I have an iMac with version 10.5.8 Mac OS X, can i upgrade to the latest Mountain Lion S X from the Apple web page.
    When I tried, it said I had to have 10.6 or later............how do I get there?

    No. You need to phone the online Apple Store and order Mac OS X 10.6 on DVD.
    (71007)

  • Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    Hi,
    How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
    In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
    Get-MailboxFolderPermission -Identity
    CEO’s email address:\Calendar -User assistant’s email address
    Also check with:
    Get-Mailbox -Identity CEO’s mailbox
    | fl *GrantSendOnBehalfTo
    Please let me know the result.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    Try going to the following
    Tools->Web Developer-> Page Source.
    You can also access this by way of keyboard shortcut Ctrl + U
    The View Page Source option is also available via the right-click menu by just right-clicking inside the page window & it will be the penultimate menu item.

  • Hi I call you from Iran. Today I encountered a problem I hope you can help me. I have iPhone 5 with version 6.1.4. Jailbreak I would rather not unlock. My problem is that the Operator name (top left) searching ... The appearance of! And no matter how I tu

    Hi
    I call you from Iran.
    Today I encountered a problem I hope you can help me.
    I have iPhone 5 with version 6.1.4. Jailbreak I would rather not unlock.
    My problem is that the Operator name (top left) searching ... The appearance of!
    And no matter how I turn off and I remove the SIM card Sarchyng not stop.
    Even when I'm not on the phone's SIM card No SIM card Does not appear.
    I appreciate your help.
    Thank you for your attention.

    ilove.perspolis wrote:
    Hi
    I call you from Iran.
    Today I encountered a problem I hope you can help me.
    I have iPhone 5 with version 6.1.4. Jailbreak I would rather not unlock.
    My problem is that the Operator name (top left) searching ... The appearance of!
    And no matter how I turn off and I remove the SIM card Sarchyng not stop.
    Even when I'm not on the phone's SIM card No SIM card Does not appear.
    I appreciate your help.
    Thank you for your attention.
    I read this to say that the phone is not jailbroken and the OP does not want to jailbreak it.
    The only way to unlock it is to contact the carrier it is locked to, and ask them to unlock it.
    You are also in the unfortunate position that the iPhone is not supported in Iran due to the international embargo.

  • When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

    Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

    Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
    I am also receiving a warning message "WARNING: Parental control appears compromised!".

  • Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

    The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

    A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 100%;
        position: relative;
        text-align: left;
        cursor: pointer;
        width: auto;
        float: left;
    The rest have been given a width of 15em, so this value may be a good start.
    DESIGN INFORMATION: describes color scheme, borders, fonts
    /* Submenu containers have borders on all sides */
    ul.MenuBarHorizontal ul
        border: 1px solid #CCC;
       width: auto;
        background-attachment: fixed;
    Just keep the border property and remove the other two.
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
              display: inline;
              f\loat: left;
              background: #FFF;
    The following is the original for the above
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
        filter:alpha(opacity:0.1);
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
        ul.MenuBarHorizontal li.MenuBarItemIE
            display: inline;
            f\loat: left;
            background: #FFF;
    Cheers,
    Gramps

  • My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

    My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it. 

    Hello Korawees,
    I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
    Before Starting
    It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
    Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
    How to restore iPod shuffle
    Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
    Download and install the latest version of iTunes if you do not already have it installed.
    Open iTunes, and then connect iPod shuffle to your computer.
    After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
    Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
    The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
    Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
    Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
    If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
    A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
    After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
    When you come to step 7, I recommend Restore Option 4.
    Take care,
    Sterling

  • No icons on google toolbar. I just get a blank toolbar with nothing on it. unable to modify/reset. reinstall did not volve the issue.

    no icons on google toolbar. I just get a blank toolbar with nothing on it. unable to modify/reset. reinstall did not volve the issue.
    Cannot click on gmail icon, google maps icon, ect... there is just a blank bar and you can do nothing.

    Do you have the latest version of the Google Toolbar?
    '''7.1.20110512W''' is the latest, as far as I know.

  • I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file).  I'm on OS 10.5.8.  Never had a problem with this before.  What am I missing? Any idea

    I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file).  I'm on OS 10.5.8.  Never had a problem with this before.  What am I missing? Any ideas?

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Maybe you are looking for

  • AS2 receiver error

    Hi Experts, Im getting this error in the AS2 receiver channel: Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to

  • How can I get the java 2D java2D  tutorials�H

    How can I get the java 2D java2D tutorials which I dont need lookup it online?

  • Dynamic WD Component iView not visible?

    Hi all I am using a WD Comp iView. Source view is triggering a page service to set up a target view on the WD Comp iView place holder. Even though i face no exceptions the WD Comp iView is invisible. I have checked all ppties but of no avail. I m NOT

  • Security issues with Lion

    Anyone know what the real deal is with OS X Lion security.  I've heard lots of things about how the recent Blackhat conference in Las Vegas said that Apple's security was not as good as Windows 7's.  Anyone know anything about this?  Thanks in advanc

  • Midi Server crash

    I am unable to open the midi tab of the Audio/Midi Setup app. I get an error message that states "The application Audio MIDI Setup has unexpectedly quit" and Im then sent to the Submit Report function. Also I am unable to open Digital Performer for t