Static only out of right side of hd 555 heatset? sol

?i got a senheiser hd555 headset and a hi fi extreme gamer card.
and i seem to be getting a faint static sound out of the right can only.. i've read alot on here about the static problems.. does anyone else have it just out of one side of there headset when the headsets plugged in ? im thinking about taking the card back and seeing if its just a bad jack or something..
when i plug the headset into one of the regular speaker jacks the static goes away.. i dont get it.. any suggestions ??- problem ended up being a bad jack on the card itesef. took it back to best buy.. got another one and havent had any static since.. one thing i've noticed though is the media source install is buggy as heck.. takes my computer about 0 min to shut down while the programs running fail to shut down.. ill have to try to get to the bottom of that next i geuss.Message Edited by motion2099 on 2-2-200603:4 PM

i checked that already a whole bunch of times.. and its not the problem.. its just really light static.. and i dont think its the head phones because the volume of the static , does not change when i turn up the volume.. maybe ill let them break in a little bit more and see if it doesent go away or something ..
its not a real loud static sound.. just a bit of a hiss.. another thing i have been noticing though is that the right speaker on the headset gets a little bit of distortion when you start to turn the volume up about half way.. the left side you can go up way farter and still not get distortion.. i wonder if the distortion is being caused by the static.. the distortion sounds likea? sub wooder with a loose grill in front of it.. you kow that vibrating like sound that sais youve turned me up to far.. accept i havent turned it up to far..

Similar Messages

  • Only getting sound out the right side speaker

    Just this morning, I realised that I am only getting sound out the right side (built-in) speaker on my iMac 24 inch.
    Any ideas as to why/how this is happening. It was working fine last night.
    Do I have to take it in for repair??

    thanks- yes that was the answer!
    god knows how i altered the setting. must have been a keyboard short-cut and i did it by mistake...!

  • MDR-1RBT static hiss on the right side

    My MDR-1RBT makes a low but noticeable static hiss on the right side. It comes and goes, but is audible most of the time. Is this normal behaviour of the MDR-1RBT? I love the headphones, but the hiss is a bit irritating when listening to audio books etc. 

    Please follow the troubleshooting steps here if the sound is cutting in and out on one or both sides of the headphones or is experiencing static hiss.
    However, if none of the steps will work, please reach out to Sony Germany who has a separate community which can be found here for best assistance. 
    If my post answers your question, please mark it as "Accept as Solution"

  • I'm getting audio in voiceover only on the right side in iMovie..  how can I adjust the pan.  Both right and left work in Garageband but not in Imovie.

    I'm getting audio in voiceover recordings only on the right side in playback.  How can I adjust the balance?  I'm using an external mic and preamp that work fine (both channels) in Garageband, so it's not my recording setup.  Balance is Ok using internal mic but the sound is not as good.

    When you share your project, use SHARE/EXPORT USING QUICKTIME.
    Click Options.
    In the Sound settings/Channels, choose MONO.
    In the Video settings, choose the codec of your choice (probably h.264) under Compression.

  • Why sound came out only on the right side ?

    Hi guys,
    When I play in on the timeline & view the sequence in the canvas, the music came out on both sides of my earpiece.
    When I export it using QuickTIme, the sound only came out on the right side of my earpiece ?
    I check both the sound lines in the timeline & they look identical.
    Any ideas why ?
    Thanks

    Ian R. Brown wrote:
    Ctrl click on the QT file and select "Get Info".
    Check to see whether there are 2 audio tracks or just one ....... it's just possible a glitch may have made it lose one.
    Sorry Ian, I should have make myself clearer. When I said the sound only come out on the right side I meant this:
    Say there are 5 sections in my clips.
    Section 1 & 2, exported file when played sound only come out from the right ear piece.
    Section 3,4,5 exported file when played sound came out from both left & right earpiece.
    Section 1 & 2 and Scection 3,4,5 is playing the same song except that the same song starts at section 1 and 3 respectivley. (meaning at beginning of section 3, I drag the same song to the audio track to repeat the same song)
    Any ideas ?
    Thanks

  • Strange iPhone simulator slides out on right side of dual monitor

    I'm reviewing all the processes and completely stumped! Towards the VERY right side of my left monitor, I can drag leftwards and an simulated iPhone will appear for a second and snap back. I have no idea what I installed recently or way back, but can't figure out how to quit it (or uninstall)
    Any ideas much appreciated!

    I think you're right-- however, I always thought that mono recordings played through both ears--always worked that way on my old stereo system! 
    This podcast does that, too, but only if one pulls the plug out a bit!  That's what's confusing to me.  Why does it change from both ears to only one ear depending on far the plug is pushed in?  (And especially as it behaves opposite what one would expect-- both ears when not plugged in all the way-- only 1 when fully embedded!)

  • Hearing static only on my Vista side :O

    Hi i have been using vista for awhile now.... and it was running smoothly but all of a sudden i am hearing static..... at first i thought that i busted my ear phones so i unplugged them. but it can still hear the static from my speaker... at first i thought the impossible that i busted both my earphones and speakers. but to see if i was right i checked my OSX side... the sound was as clear as a whistle...so now know that is only from the vista side... i updated my realtek driver too... i also dled the update for the boot camp... im really stuck can some one help me please T-T

    i checked that already a whole bunch of times.. and its not the problem.. its just really light static.. and i dont think its the head phones because the volume of the static , does not change when i turn up the volume.. maybe ill let them break in a little bit more and see if it doesent go away or something ..
    its not a real loud static sound.. just a bit of a hiss.. another thing i have been noticing though is that the right speaker on the headset gets a little bit of distortion when you start to turn the volume up about half way.. the left side you can go up way farter and still not get distortion.. i wonder if the distortion is being caused by the static.. the distortion sounds likea? sub wooder with a loose grill in front of it.. you kow that vibrating like sound that sais youve turned me up to far.. accept i havent turned it up to far..

  • Why is every web page only on the right side of my screen?

    Every time I open fire fox browser web sights only appear on the right side of my screen. I am using a flat screen tv as my screen so there´s plenty of room. All text etc on the right is cut off and on the left side there is a third of the screen blank.

    Do you have the side bar open (View > Sidebar)?
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Reset the page zoom on websites that look wrong: "View > Zoom > Reset" (Ctrl + 0 (zero))
    See http://kb.mozillazine.org/Zoom_text_of_web_pages
    See also http://kb.mozillazine.org/Websites_look_wrong

  • Only hearing from right side on my head set

    I can only hear from the right side on my head set. I have tried several different headsets and songs get the same result. Help???

    You have a broken headphone jack, you will need to get it replaced or replace it yourself.

  • Another "sound doesn't play out of right side of headphones" topic.

    I don't know why this happens. My friend, who knows a crapload more about audio and electronics than I do doesn't know the exact reason why this is happening.
    Nothing in the headphones port has been badly damaged, yet I've only had my video iPod for about two and a half months now. I've asked at least 4 different people to try using their headphones with my iPod (one person actually had the same problem with his iPod nano), and they all said the same thing: "There's something wrong with your iPod."
    Though I do drop my iPod quite often, it has a third party case that does the job of protecting it from scratches and other abuse quite well. I've never dropped it onto anything like cement, I don't subject the thing to large amounts of weight. I treat it as if existence as we know it depended on my iPod still being able to function properly.
    There's an Apple Store not too far from my house, but it's located in an extremely busy shopping mall. My art teacher, who's had his 5G iPod for nearly a year, says that they'll fix it for free, provided that it's still under warranty. However, I don't know if my iPod is still under warranty....

    A case won't protect your iPod from internal damage if you drop it, and you don't necessarily have to drop it on a hard surface to break it. If your friend can't figure out that dropping an eletronic device with a hard drive will damage it then he really doesn't know much more than you about audio and electronics.
    Your warranty won't cover damage from dropping it.
    What is the problem with the iPod? Sound out of only one channel? Bad sound? No sound?
    And why do you drop it quite often?

  • Sound only out of right headphon

    How do i fix it????

    It is a hardware issue - likely a bad contact between the earphone plug and jack
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/

  • Line Out (Lime Color) Right Side not working.

    I plugged in a 3.5m into my Line Out, I have it connected to my stero aux. My stero is working fine and everything with the sound is working right. No shortage in my wires. When I plug it into my Headphone jack it works fine but in my line out the right side only works but the left side sounds really really low. I have adjusted the levels and balance.
    I think that the Maufacture must of missed up on the line out size. That's the only thing I can come up with.

    this has happened to me. What part do I need to ask for in the shop. My sound was muffled, but I removed the speaker plug from the back and put it in the headset in the front and the whole thing is great now. I just need to now what part I need to ask for so I can fix it. I will google how to do it.
    7 - Audio: Line Out (lime)
    Heres my specks
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01486318&lang=en&cc=us&taskI...

  • Mac Mini Audio out only sending to right speaker

    I am running a Mac Mini OS X 10.6.4 as media center.  I am running video directly to my TV, which works fine.  I am running the audio from the Mac Mini out the headphone output through a Y audio Left / Right cable to a sub woofer. The issue I am having is that the audio is only coming out the right side?
    When I hook up a pair of headphones I get sound out of both sides, but when I switch it back to the Sony Soundbar it is segemented to the one side.
    Any suggestions?

    If the output works fine with a set of headphones and not the Sony soundbar, that suggests the cable feeding the soundbar or the soundbar have issues. Have you reversed the cable channels at the soundbar to verify that the soundbar is working correctly? If the working speaker switched sides, then get a new cable.

  • No sound from speakers on dv-6245us. headphones only play right side.

    Hello.
    I have an HP Pavilion Dv6245us Laptop with Windows Vista 32-bit. I use this laptop mainly at work and it sits on my toolbox at work and I connect it to my Creative Home Theatre system via the 2 connections in the front. I switch between both the SPDIF and the headphones jacks from time to time.
    Here is the issue: I noticed the other day that when my cable was plugged in the SPDIF connection, depending on how you moved the cord, you could hear audio only on the right side. When I unplugged the cable, i noticed my laptop speakers did not play any sound. I tried plugging into the other jack on the front and both jacks behave the same: any audio device plugged in will only play on the right side, no sound on the left, however when the cable is in the headphones jack, i can move it and i always hear sound, but when i move it around in the SPDIF jack, it cuts out when you move it. still no sound from the laptop speakers.
    I thought it was a driver issue, so i updated the drivers and even reformated the entire computer. This did not work. I have read around and noticed that some people say a tab may be stuck in the jack and to try and plug something in and out of it rapidly and that should get it to recognize that nothing is plugged in, however that also did not work.
    Just curious if there is anyway to shut off the spdif connection and maybe it would allow the speakers to work again, since that seems to be the jack with the issue, or if there is any other way of solving this issue.
    Thanks, Mike.

    Anyone? Really cannot find any info on this problem..

  • After cartridge change blurry on right side

    Hi there,
    I change the black  cartridge, after it, it prints blurry, when I put the old cartridge again , it prints well. why? Only on the right side it's blurry.
    Printer: HP LaserJet pro 400 color MFP m475dw
    Details: 
    Toner Cartridge
    TR-CE410X
    Thanks in advance

    Hello ragam02,
    Welcome to the HP Support Forums! To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/.
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • Data recovery from Itunes

    I got my Iphone 4s broken last night but I did synced it with iTunes last week. I wanted to recover my data (Pictures, contacts, etc) I have been searching on the web for the solution and did find some data recovery softwares for itunes which let me

  • How to solve this ATP problem

    dear all, wen i m creating the sales order i m getting this problem.... following is the error The sum of the requested quantity exceeds the sum of stock items Message no. VV041 Diagnosis The availability check in your system is configured in such a

  • Mouse/Trackpad/Trackpoint acceleration: How to get it right?

    I fail to get the acceleration for my mouse, trackpad and trackpoint right. It seems like having 100 interdependent knobs and trying to find some secret combination of values. I decided to use xset and xinput. For example: xset m 5 1 xinput --set-pro

  • I cannot change time in NEW EVENT scheduler box

    The time has a letter in the hour place. It can be highlighted but will not change to a number

  • JCo to BC

    Hi, I want to connect to Business Connector (BC) via JCo. The problem is that the BC uses a Port. How do I tell JCo to use a port, wenn I create a new Connection. If I enter the IP-Address added with the port number (eg xxx.xxx.xxx.xxx:xxxx) I get th