Statistical Internal Orders - How can i charge to multiple cost centers

In the master data for the statistical internal orders, I am only able to enter one cost center in the 'Actual Posted Cctr' field.  Is there a way to have multiple cost centers and the allocation % for each cost center (similar to the settlement rules on regular internal orders)?
thanks!

Hiya,
OKB9 works by assigning multiple Cost Centres to the Company Code + GL combination. However, I don't believe OKB9 is your solution - for the simple reason that you wish to post the information to multiple CCtrs, along with posting it to this Statistical IO.
In my opinion, you may have to delete the Actual Cost Centre assignment and, at the time of document posting, assign the True CCtr as well as this IO, or look for a User Exit that will trigger flows to multiple CCtrs along with this IO.
The other option is to make this a real posting to this IO (change the IO from statistical to real), and then settle this cost to multiple CCtrs. As long as it stays statistical, you don't have the liberty of settling the cost.
Hope this helps.
Cheers.

Similar Messages

  • I'm very curious about cost of service. How can VZW charge such high cost for their service and Walmart sponsered carriers charge $49.99 for unlimited talk,text, and data per month?

    We live in an area that does not have fiber optics for VIOS, or cable. Our service is received by either MIFI or Satellite service. I'm paying right now over $200 for my Jet Pack and Droid. I'm on a fixed income and I have End Stage COPD, so that means my quality of life has been lessened due to cost of service. Please explain to me the difference between the two services. Kevin. 

    demmo86rt wrote:
    Most of those Walmart plans are prepaid, usually don't have the same coverage as postpaid, even from the same carrier, and can come with hidden fees. Not to say they are always a bad deal, but I would make sure you know exactly what you are getting.
    Yep none of that will be 4G. Not on any phones that use Verizon's network. Only the Galaxy S 2 on Straight Talk will use "4G" on at&t's network and it's not even LTE is HSPA+. Also the fine print of the "unlimited" data says after 2 GB Straight Talk can throttle you down to 2G speeds and if you continue to use more than 2 GB a month they can cut off your service forever.

  • Help needed with reporting statistical internal orders

    Dear experts,
    I'm required to report Statistical, Real and Planned internal orders on a single report. I'm using infocube 0COOM_C02 for the same. While reporting Real and Planned internal orders, we can simply restrict key figure 0AMOUNT to Value Type to 10 and 20 respectively. I need to know if there's any value type for statistical internal orders? Can we extract the statistical internal order data using the standard extracters for this infocube or we'll need customized extractors. Please guide. Thanks a lot.
    Regards,
    Sumit

    Hi Paolo,
    Thanks for your reply. I think we can extract all internal orders using standard extractors but as far as reporting them is concerned, If we use cost centre not equal not not assigned, than we may report some real internal orders because many real orders may be associated with a cost centre. I'm a little confused here. A clarification will be much appreciated. Thanks a lot.
    Regards,
    Sumit

  • HT3702 I been charge for app that I didn't order how can I get my money back ??

    I been charge for apps that I never order , how can I get my money back ? 

    Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.
    If its not in your purchase history, you should report it to your credit card company instead.

  • Statistical Internal Order on a Purchase Order

    Hi,
    We are trying to use a statistical internal order on a purchase order along with a real cost center. But we are unable to get the internal order to show up on the FI documents being posted using goods receipt.
    Purchase Order has been created with 'F" (order) as the account category. On the account assignment tab we have maitained an expense cost element & real cost center & statistical internal order.
    Internal order master data has been created with just the company code and object class as OCOST.
    Please let me know what we are doing incorrectly and how can we have the statistical internal order show up on the FI document.
    Thanks,
    Venkat

    Hi Venkat,
    Statistical Internal order doesn't work if GL account used is not a cost element. You need to make your GL account as cost element. If the respective GL account doen not need to be cost element then you can make it statistical cost element with category 90. In this case it'll not ask for CO object or it'll not create any error or issues.
    Hope it'll work.
    Thanks,
    - Mahak
    Edited by: Mahak Birla Mantri on Jun 15, 2009 11:34 AM

  • Plan data on Statistical Internal Order

    Dear gurus,
    Presently we have real internal orders for the projects but now we are diverting from real Internal Order to Statistical Internal Order. Before we use to plan data on the real internal order. My concern is by changing the IO to statistical, would it impact on the Plan data? How can we approach the Planning data in the statistical Internal Order?
    Also while creating Statistical Internal Order, the system does not allows to select Plan-Integrated Order field. What is the signficance and by not selecting this field, this does impact the plan data on the statistical IO
    Thank you in advance
    Regards

    Diverting to Statistical order,system will not allow you make settlement. if you need only for information purpose, then u can adopt the statiscal order.
    System will not allow to select statistical indicator & Indicator for Integrated Planning. you will only select one option. u can only select with real indicator
    by selecting the "Indicator for Integrated Planning"activity inputs planned are updated
    directly on the sending cost center if 'Integrated planning with Cost Center Accounting' is activated in the version. You can then also settle plan-integrated orders/projects to cost centers.which only possible with Real order
    I hope this will be helpful

  • Change cost center in statistic internal order

    Hello all,
    I have got a problem with the master data of our internal orders. We´ve defined them as statistic objects, and the information of the cost center is an obligatory input within the master data of each internal order. After the first entry has been done the cost center can not be changed anymore. Now we have the necessity to change the cost center in all our internal orders once. Could you help me to find a solution how the cost center remains a changeable input in the master data of a statistic internal order? Or how I may change the cost center just once?
    Thanks for your help.
    Best regards,
    Bettina

    Dear Sir,
    The field is greyed off if the following is applicable:
    -> the order has planned or posted entries
    -> you have created a settlement rule on it.
    If you want to have the field to be changable, please apply the modification note 198036
    regards
    Waman

  • Account assignment category for cost centre and statistical internal order

    When issuing purchase order, we use account assignment category u2018Fu2019 for (PM) order, and u2018Ku2019 for cost centre.  What account assignment category to use, when issuing purchase order, if we want to charge to both cost centre (as mandatory) and statistical internal order (as optional entry field)?
    Do you create custom account assignment category for that purposes? 
    I reviewed Note 305385 but do not think it's relevant to us.

    Hi Stacy
    you can create a custom acct assgn category (AAC) in OME9... COPY the K to Z and make changes in it
    However, I feel the Std AAC K should serve your purpose if you want to have Cost Ctr as mandatory and Order as Optional
    Br, Ajay M

  • Creation of Statistical Internal Order

    HI
    Can any one help me how to create statistical internal order? including configuration steps.

    Hi
    When you create IO, in the 2nd tab there is a check box for statistical order.. Check it and your order would become statistical
    Else, in the Config, T code KOT2_OPA... Choose your order type, and click on "Field selection" in your order type... This button is towards the lower left of your screen
    Make "Identifier for statistical order" as required entry in the next screen that opens.. With this, your IO will be by default statistical whenever created using this order type
    Ajay M

  • How can i charge my US purchased macbook in the UK

    how can i charge my US purchased macbook in the UK

    niikoi wrote:
    thanks guys but I did that. it worked for a bit then it stopped. i dont know why that happens? I've tried 3 adapters already.
    Make sure you are using the  proper adapters.  The problem could be your MagSafe.  Take the MBP along w/the Magsafe & adapters to the local AS or an AASP.  Let them check it out.  Diagnostic testing is FREE! 
    International AASP’s & Other Services 
    AASP's Outside of the USA
    User Groups

  • Statistical posting to Cost Center using Statistical Internal Order

    We have a delivery transction in SD which used both a statistical order and cost center as account assignment objects.  However, in the cost center report, the amount was shown in the statistical portion of the report.  Why could have happened?  Shouldn't the item be shown as a true posting?

    When you post to an internal order and cost center one of these is statistical
    When you say the internal order is satistical then you have actual cost on costcenters. When the internal order is not statistical the internal order get the actual cost and the cost center statistical.
    In the fieldstatus group from the internal order you can make the field statistical requered. When you want only to have statistical cost on your internal order.
    With CO-PA it is an different case, see the other reaction on this. But then it is better to use profit center accounting for reporting. 
    Note SD is posting sales (sales cost) and there should no reason to post it on a cost center
    Paul

  • Asset Postings on Statistical Internal orders

    Hi
    Is it possible to see asset transactions on a statistical internal order? I have assigned a statistical order on the asset master record but can not see the acquisition and other asset related postings on the order. Of course in all the postings there is a real CO object.
    Thanks

    Hi Sreenkanth
    I have used all the reports in Internal Orders including the one you suggest and what is happening is that all the cost elements that have been posted to are displayed in the report, but the asset statistical cost element shows no values. Even when you click on the amount field and call up another report  e.g. actual line items, which is what I think you meant by break up report, there are no values shown.
    Thanks
    Ceecee

  • Linking Sales Promotions to Statistical Internal Orders

    We have two kinds of promotions here.
    a) Consumer Promotion - reduced price for a particular period
    b) Trade Promotion - Free goods - buy 10 get one free.
    We are creating these promotion through standard SAP route with a validity period, and these get populated in the sales order order correctly.
    The promotionional expenses are borne by the supplier (vendor). To debit his account with the appropriate expenses, we have created Statistical Internal orders (SIO) in CO, one per supplier account.
    (We have developed a report where we accumulate all the values dueing these two above promotions and manually pass a JV in finance in the SIO.This is a long circuitous process and we are exploring other alternativesto make the values flow directly to the SIO)
    If you double click on the sales order item, and proceed to Account Assignment tab, you will see an order no., where you can select the (SIO) no., which we are doing manually.
    I am unable to find any place in configuration of Sales Promotion/Sales Deal/ SIO (definition) through which I can default the SIO no. in the sales order, so that the values can flow automatically.
    Please help if possible.
    Thanks & Regards
    AN

    I think that this is not possible.
    Roberto

  • Regarding statistical internal order

    hi guys i have following issue with internal order....
    Statistical Internal Order - Used to track R&D dollars spent for different projects. The internal orders will not be settled - just for reporting purpose.
    can n y one explain what is this all about.? can n y one help me solving it?
    Thanks in advance

    Hi Paru,
    A statistical order means whatever posting goes to this order is only for information purpose. When you assign a stat. order in the document line item you will also have to assign the real cost object to carry cost to controlling. You can not distribute or settle these cost from the stat. order to another cost object because of the statistical status. If you require that cost after posting to order should be able to reposted to other cost object you have to creat the real cost order.
    If you find this helpful please reward some points.
    Js

  • Capturing Statistical Internal Order through Sales Order

    Hi all,
    Could you please let me know if we can capture Statistical Internal Order through a Sales Order for revenues?
    Thanks & Regards,
    Sajan

    Hi Sajan,
    Yes. You can assign the Statistical Internal Order in the assignment tap. Since I do not have SAP System in front of me. You can take the help of SD Consultant to locate the field in Sales Order.
    Trust this resolve your problem,
    Cheers,

Maybe you are looking for