Statistics of Sync and Async messages in PI

Hi,
How can we count no of Sync and Async messages that were processed(sucessful or unsucessful) in PI.
Does the worbench has any table or Report that will give me the statistics.
Request some pointers on the same.
Thanks ,
Bhanu.

Hi,
Yes, such a report is available in RWB under Performance Monitoring. Simply choose the required time period, and use Display Options to add the Processing Mode (that will say: sync or async). You can also use Performance Monitoring to get more details about these messages.
Hope this helps,
Greg

Similar Messages

I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iphone won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do?

I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iPhone 5 won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do? Using iTunes 12 is not an option. Many features I used for audiobooks have disappeared.

The version immediately prior to 12 was 11.4.0.18. Here are direct download links from Apple's servers:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2

TS2634 My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What

My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?

Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article.

Can processes be both sync and async

Hi,
When creating a BPEL process in JDeveloper, there are two pre-defined templates for synchronous or asynchronous processes. As such, I've been viewing a process as being either synchronous or asynchronous.
However, after a bit of experimentation, I've come to the conclusion that a process can contain both synchronous and asynchronous operations.
Does this sound correct? Should I not be viewing a process as being one or the other, and it is fact the operation that is sync or async?
Cheers,
Toby

Some thoughts on that:
-You can view sync as a special form of async, so each sync process is also an aysnc process. (I'm ignoring the tech diff like two ports, two partnerlinks here)
-You can call sync and async (BPEL-) processes in one process.
-If a process P contains only sync processes, that will make P sync.
-If a process P contains (among others) at least one async processes, that will make P async.
-If you have a async process, you can wrap its invocation with a timeout, making it a sync process.
Roman

Differnce between sync and async webservices

All,
What is the difference between sync and async web services?
Actually i am looking for a web service, which doesn't return a response. is this achievable?
Thanks

SRAVZ wrote:
What is the difference between sync and async web services?from a webservice protocal perspective there is no difference. you still make a request and get a response. the difference is in what the initial response contains. in a synchronous call, the initial response will contain the final result. in an asynchronous call, the initial response will not contain the final result, but may contain some sort of "ticket" which can be used in a subsequent call to get the final result. generally, the client will need to poll the webservice until the final result is available.
Actually i am looking for a web service, which doesn't return a response. is this achievable?it's not really possible to not return any response. http is a request/response protocol. if you don't have any data to return, then the response will be fairly minimal, but it will still exist.
Edited by: jtahlborn on Dec 2, 2012 9:22 AM

Naming sync and async operation

Hi there,
Does somebody know what is the rule for naming the synchronous version of an asynchronous operation (or vice verse)? Also, is the implementation pattern for the Create/Update/Delete/Sync EBO based EBS operations always supposed to be asynchronous request-response (while synchronous for Query/QueryList)?
I know that Process() can be designed as both synchronous and asynchronous, but can the aforementioned have their synchronous version as well (asynchronous for Query/QueryList)?
Regards,
/Miko

839396 wrote:
Dear Friends,
In 11g databgurad ,
I planned to used 2 physical standy once in the same LAN and another in the DR site
I need to have SYNC between primary and Standby 1 which is in same LAN
I need to have ASYNC between primary an standy 2 which is in DR site
Is it possible , if so how do i achieve this?
Because i believe SYNC and ASYNC will be decided by oracle internally based on the Protection mode we choose so in that case
we can't have mix up (SYNC and ASYNC) for standby databases?
Regards,
DBI think John already mentioned how to do, let me derive more .
SQL> alter system set log_archive_dest_2='SERVICE=same_lan SYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=<db_unique_name>'
SQL> alter system set log_archive_dest_3='SERVICE=DR ASYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=<db_unique_name>'
>
     839396
     Newbie
Handle:      839396
Status Level:      Newbie
Registered:      Feb 23, 2011
Total Posts:      14
Total Questions:      8 (8 unresolved)
>
why all the questions are unanswered? Please close the threads and keep the forum clean. https://forums.oracle.com/forums/ann.jspa?annID=718

Design question - 1 source (sync) -- 2 receivers (sync and async)

Hi All,
What are the options available to design following scenario:
Message (material update) sent to XI from 3rd party system, XI will update material synchronous calling BAPI in SAP, response will be sent back to 3rd party. The same message (material update) needs to be updated in SQL DB asynchronously.
Do we need to use BPM for the above scenario (SystemA <> XI <> SAP and same message from SystemA -->XI --> SQL DB)???
If I need to use BPM What are the steps to be used in BPM??
Can we do this without BPM?? What is the procedure??
Thx
N@v!n

Ahmad,
I think that for 1:n scenarios, if you have synchronous receiver interfaces, you'll need BPM for that. That happens because XI wont be able to decide on which receiver response message will be actually mapped back to sender response. However, Im not sure it wont work for 1:2 scenario, if you have 1 sync and 1 async receiver interfaces. Theoretically, it could work. You'll have to test it in order to be sure. If you get "TOO_MANY_RECEIVERS" error then it is like I said, it wont process 1:n with sync interfaces.
Kumar,
as for the BPM, you dont have necessarily to have transformation steps inside BPM, you can normally perform mappings at interface determination runtime (given that your interfaces are unique for each send step inside BPM). The steps you really need inside BPM are:
1. receive step in "open sync/async bridge" mode;
2. send step in synchronous mode (for receiver RFC);
3. send step in asynchronous mode (for receiver JDBC);
4. send step in "close sync/async bridge" mode.
Regards,
Henrique.

Sync and text messages

I recently purchases a Ford vehicle with sync and have paired by Iphone 4 to it. I an wanting to receive my text messages via sync but it says my phone is not capatible for receiving text messages via sync....anyone know if this is possible?

in my own opinion, it's a software limitation. for the reason that the features are part of the program that specifically did not work on certain devices.
you can report it to ford if you wish they can create a patch for that option to work for centro.
Post relates to: Treo 680 (Unlocked GSM)

Doubt about Sync and Async process

hi experts i have one small doubt
if we r having the scenario like file to rfc
iam passing the input parameter like material number through file adapter
and then i want to get the material details response from rfc sap r/3 to file system
this is the scenario.
now here which is the synchronous processs
and which is the asynchronous process
please let me know
clear my doubt with explanation please......
thanks
giri

Hi Sesha,
For information on sync/async please refer:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65d4dab39b0398e10000000a1553f6/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65d4dab39b0398e10000000a1553f6/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm</a>
Regards,
Subhasha ranjan
Message was edited by:
Subhasha Ranjan

Facing problem when using SYNC and ASYNC bridge in ID

Hi all,
In BPM i am using SYNC/ASYNC bridge for that Outbound Interface and BPM Sync Interface has the same structure is it mapping necessary for that intercaces.
In interface determination it is showing error duplicate interfaces in ID test configuration , when i loading the Interface mapping for the same.
In the Receiver determination i am sending the message based on the conditions to the particular receives through different receivers Business Systems from the Sync interface showing error.
Give me solution how should i do the Interface determination and receiver determination.
Please help me any one .
Thanks in advance,
Manohar.
Edited by: Manohar S on Feb 28, 2008 9:50 AM

Sorry for delay.
Tough question.
Oracle® Database High Availability Best Practices 11g Release 2 (11.2) E10803-01 August 2011
Under "5.1.8 Set LOG_BUFFER Initialization Parameter to a Minimum 8 MB"
States :
"If you are using Oracle Data Guard with asynchronous redo transport, you may need to increase the value of the
LOG_BUFFER parameter to avoid disk I/Os to online redo logs."
Nothing about "Synchronous".
I agree with you on Oracle Support Note 951152.1, its vague.
Additional links on the subject
This also seems to imply :
http://joordsblog.vandenoord.eu/2010/08/data-guard-optimizing-async-redo.html
So does this ( With ASYNC, increase log buffer size if necessary )
http://www.oracle.com/technetwork/database/features/availability/316925-175283.pdf
This one has a very nice Synchronous and Asynchronous compare.
http://www.datadisk.co.uk/html_docs/oracle_dg/architecture.htm
New Zealand, Someday I may have to travel there.
Best Regards
mseberg

ITunes failing to sync, and error message 1621

A few days ago, my iTunes, upon noticing my iPod touch plugged in, reported that it had failed to sync do to a "dataclass error". The message said something along the lines of "iTunes was unable to load from dataclass services. try reconnecting." I did just that, unplugging the iPod and plugging it back in. This time, iTunes again failed to sync, saying that it was entirely incapable of interacting with the iPod, suggesting that I restore the thing. Though frustrated, I did that. 2 hours later, the iPod was fully synced from back up, and the problem was seemingly solved.
But now it just happened again, only worse. After telling me to try restoring, and after 5 minutes of iTunes trying to restore the iPod, it finally reported that it was unable to, reporting an "error message 1621, unkown error occured, unable to restore iPod." So, now I can't sync my iPod. Not only is iTunes currently unable to interact with it, it can no longer restore it either.
What's going on? Also, if it helps, this didn't start occuring until after I installed the 2.0 update. I have iTunes v7.7.1.11, and my iPod touch is updated to version 2.02.

i am having the same problem as well. anyone have any idea how to fix this issue?
thanks, ff

Sync and async bpel process

Hi,
I was reading about the synchronous and asynchronous process in the forum, I have also some similar problem.
some of my questions are:
If suppose my BPEL process is going to take around 2 mins or more to finish , then I cannot chose synchronous BPEL process as the default timeout is 45sec and not recomend to increase the time.
As the above is true, I have created a asynchronous BPEL process, now I want the reply back from asynchronous, is this is possible? even I found that when I invoke the partner link of asynchronous BPEL process it doesn't ask for the output variable. SO if any process going to take longer time and need response from that, whats the solution.
Regards,
Sreejit

Hi James,
Thanks, yes you are correct that receive is required for the response from async process.
Do you have any idea how we can get the response back if we are calling the asyn process outside the SOA server, say from PL/SQL or Java API. PL/SQL can call the sync process and get the response back but in case of async process it returns null as the callback response of async not send the response to database. Is this possible with java api, any link or sample which illustrate this or any step suggestion. Actually I am trying to call the BPEL process from Oracle Apps R12 E-Business suite.
Regards,
Sreejit

Sync and Async in one port

Hi
Can somebody advice me, I'm using multi operations single port wsdl
so far my operations are of type async, ( RequestPort) (ReponsePort)
now I need to add another operation which is Sync
I added this in the same port as (RequestPort)
When I try to create BPEL it doesn't work. Can I mix two types in single port , if so any examples please

<?xml version="1.0" encoding="UTF-8" ?>
<definitions targetNamespace="urn:Usert"
             xmlns="http://schemas.xmlsoap.org/wsdl/"
             xmlns:tns="urn:UserManagement"
             xmlns:xsd="http://www.w3.org/2001/XMLSchema"
             xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
             xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
             xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
             xmlns:clpaou="http://com.oracle/app/test/UserService">
<types>
    <xsd:schema targetNamespace="urn:UserManagement/types"
                elementFormDefault="qualified"/>
    <xsd:schema>
      <xsd:import schemaLocation="xsd/User.xsd"
                  namespace="http://com.oracle/app/test/UserService"/>
    </xsd:schema>
</types>
      <message name="AddUser">
    <part name="part" element="clpaou:UserRequest"/>
</message>
<message name="UpdateUserMsg">
    <part name="part" element="clpaou:UserRequest"/>
</message>
   <message name="DeleteUserMsg">
    <part name="part" element="clpaou:UserRequest"/>
</message>
<message name="UserResponseMsg">
    <part name="part" element="clpaou:UserResponse"/>
</message>
<message name="GetUsersMsg">
    <part name="part" element="clpaou:TargetRequest"/>
</message>
   <message name="GetUsersResponseMsg">
    <part name="part" element="clpaou:UsertRequest"/>
</message>

<portType name="UserRequestPort">
    <operation name="AddUser">
      <input message="tns:AddUserMsg"/>
    </operation>
    <operation name="UpdateUser">
      <input message="tns:UpdateUserMsg"/>
    </operation>
     <operation name="GetAllUsers">
      <input message="tns:GetUsersMsg" name="GetAllUsersRequest"/>
      <output message="tns:GetUsersResponseMsg" name="GetAllUsersrResponse"/>
    </operation>
</portType>
<portType name="UserManagementResponsePort">
    <operation name="UserManagementCallback">
      <input message="tns:UserResponseMsg"/>
    </operation>
</portType>
</definitions>
this is my wsdl, can this be possible to work, as this is not working when i run getallusers opertion
getallusers is used in one bpel
the other operations are in separate bpel

Syncing and Error messages

I have a broken Itunes configuration... It affects several things.
I have an Macbookpro, running snow leopard. It had Itunes 11.4 running on it.
My apple ID for app purchases etc is (lets say .... )[email protected] (This is in the australian store).
I also have an apple ID in the USA Store ([email protected]) but, if push comes to shove, I can "lose it"/
I also have an Apple ID ([email protected]) for icloud stuff.
I had/have an Iphone 5 (IOS 8.1) , and have just received an Iphone 6. (I also have an ipad 3)
So the logical thing to do was to back up the iphone 5 to my macbook pro, and restore to my iphone 6.
Nope - attempts to backup the iphone locally failed - click on the backup button, and it returns instantly and nothing has been backed up.
I note at the same time, that the the "contents of the i-device" bar at the bottom of the itunes screen, that normally says something like "Audio XX GB, Video YY GB, apps nn GB, Other - Just has "Other" and one can get the "size" by hovering over it.
So, this is getting frustrating. - in order to install my Iphone 6, I back up to Icloud (initiated from the phone, because itunes won't. allow it).
Of course, this ***** lots of internet bandwidth,but that's OK, I am on a fairly hefty data plan at home and in the office, But, I have to sign up for 20GB of icloud storage, as 5GB is not enough., but that's OK, your prices are reasonable.
So, that gets over the initial problem.
But, now that my iphone 6 is active - I still can' t copy any of my own music from itunes to it. I can drag items to the phone pulldown, but it doesn't allow me to "sync" - THere are some music items "in the cloud" in my itunes library, (Mainly things that have been flagged as "free" by itunes). The issue with the status bar/audio/video appears to be fixed, but Attempts to download them on the iphone 6, return a message.
This device is already associated with an apple ID if you download past purchases with your apple ID, you cannot autodownload or download past purchases.. .etc.... . (But, I don't really care about them). - But it's not clear what this message means.
I have since done a "local" backup of the new phone...
SO, I thought I could reload my "own music" - re-download the podcasts that I want to keep, and the videos.
Well, even that didn't work - I completely removed Itunes, and reinstalled it, and now I am getting when I try to sync something from itunes,
a message that says "The Iphone "My's Iphone" is synced with another Itunes Library" on MyMacbookPro. Do you want to erase this Iphone and sync with this Itunes Library".
What? As I said, I can probably survive reloading music etc, but I am more concerned about data associated with apps, and contacts, and SMS History and so on.... Will this action obliterate those?? ANd I am equally concerned as to what will happen when I try to Sync my Ipad again...
The major concerns are the "Apps" and associated data, and the ability to Sync locally. (much as I love Icloud - there is a lot that i prefer to keep locally) Is there a set of procedures for resolving this. Both error messages
ideally (or not), perhaps this is the time to consolidate to a single apple ID (for me) - Is there are method for "safely" merging the itunes account(s) of [email protected] and [email protected]?
Help!

Tom-
Try restoring your iPod and then syncing. If that doesn't help, take a look at this article:
http://docs.info.apple.com/article.html?artnum=302684
CG

Diff between sync and async

hai all
ihave confusion regarding synchronous and asynchronous with respect to session and calltransaction methods plz clear my confusion.
thanks in advance.
mounika

HI,
Synchronous Update
In synchronous update, you do not submit an update request using CALL FUNCTION... IN UPDATE TASK. Instead, you use the ABAP statement COMMIT WORK AND WAIT. When the update is finished, control passes back to the program. Synchronous update works in the same way as bundling update requests in a subroutine (PERFORM ON COMMIT). This kind of update is useful when you want to use both asynchronous and synchronous processing without having to program the bundles in two separate ways. The following diagram illustrates the synchronous update process:
Use this type of update whenever the changed data is required immediately. For example, you may want to link SAP LUWs together where one LUW depends on the results of the previous one.
Asynchronous Update
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
The following diagram shows a typical asynchronous update:
For example, suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG. If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
The corresponding entries in the lock table are reset by the update work process.
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load of logging them in VBLOG. If you are running a transaction in a background work process, asynchronous update offers no advantages.
Regards,
Laxmi.

Statistics of Sync and Async messages in PI

Similar Messages

Maybe you are looking for