Status F in RSPROCESS
Hi all,
the log of the BI_PROCESS_TRIGGER looks like
- Job started
- Step 001 started
- Status F hal already been reported to instance....
- Job finished
In the log of the Processchain in the rspc there is no log for this job.
What tells me 'Status F has already been reported to instance...'
Can anyone give me an explanation to that and tell me what I can do to solve
the problem.
Thanks in advance
Peter
Hi Peter.......
BI_PROCESS_TRIGGER is the trigger Job.........this Job gives trigger to the chain.........If u right click on the Start Process >> right click>> Display Message >> Backg Tab >> Batch Monitor.............there u will find this Job..........In the log of the Processchain in the rspc u will not fing log for any JOb.......RSPC is for Process chain..........u can see the log of a JOb in SM37.......and in a chain ......as I hav already mentioned......
Regards,
Debjani.....
Similar Messages
-
Process chain Error: This AND process is not waiting for event RSPROCESS
Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.SHi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli. -
Process Chain Master Data Failed.Showing Entire chain has status R
Hi,
Everyday SDMasterChain is running successfully.
Today one of the localChain or subchain has failed.
I have noticed that it has failed because last delta for one infoPackage has not yet completed and chain showing status "Entire chain now has status 'R'"
Can anybody resolve the issue?
Below is te log for the error.
Job started
Step 001 started (program RSPROCESS, variant &0000000113991, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 created request
Request REQU_449HFL0OFD22BSU2GX1X2MJJJ could not be generated with InfoPackage REQU_449HFL0OFD22BSU2GX1X2MJJJ without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 in Process Chain
Entire chain now has status 'R'
Process Attribute Change Run, variant Compounding Object has status Undefined (instance )
Process Save Hierarchy, variant Generated from LOADING ZPAK_3VBSFASA7NWCNP1JX9WXI5 has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_ATTR - Full has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TEXT has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TID_LKDH_HIER has status Undefined (instance )
Process Execute InfoPackage, variant ZMAT_SALET - TEXT has status Undefined (instance )
Process Start Process, variant Bekaert Master Data Loads - Start Variant has status Undefined (instance 449HEDPDI8N6AP5XKDUODJS6N)
Process Execute InfoPackage, variant Load from 0MAT_SALES_ATTR into ZMAT_SALE has status Undefined (instance REQU_449HB4K9K3W7GPJEF52YM83N3)
Process Execute InfoPackage, variant Load from 0MAT_SALES_TEXT into ZMAT_SALE has status Undefined (instance REQU_449HJOO6322QV09OL73P18ODR)
Process Execute InfoPackage, variant ZMAT_SALEM - ATTR - FULL has status Undefined (instance REQU_449HEJW4S44QAUTY9LQKH4QY7)
Process Execute InfoPackage, variant Delta load from 0MAT_PLANT_ATTR into 0MAT_PLANT has status Undefined (instance REQU_449HFL0OFD22BSU2GX1X2MJJJ)
Termination of chain has been reported to meta chain 449CKM1O64AHRLQJLNZ2GBWQ7
Message sent successfully
Job finished
Rgds,
CV.Hi,
There are times when Master Data load compel us to do Re-Init. I guess you need a Re-Init.
Check theses links:
1: Re: Update mode R is not supported by the extraction API
2: pl help me with repeat delta for text info object
Regards
Happy Tony -
Process Chain - Status Green but log says "Termination of chain "
Hello Friends,
One of the Steps in a Sub Chain of the Meta Chain shows the log as follows:
30.10.2009 05:20:28 Job started
30.10.2009 05:20:28 Step 001 started (program RSPROCESS, variant &0000000049485, user ID SCMREMOTE)
30.10.2009 05:20:35 Spool request (number 0000017553) created without immediate output
30.10.2009 05:20:35 Entire chain now has status 'G'
30.10.2009 05:20:35 Termination of chain has been reported to meta chain D6SBR9M64EV91ZX911UJI7K36
30.10.2009 05:20:35 Job finished
and the Step has changed to Green. So we normally assume that it has executed succesfully. Recently, there came this data issue. This step loads Open Sales Order data from a Cube to APO DP Planning area. Now few Open Sales Order Qty for a material are missing in planning area.
Does this step in the Process chain has executed Succefully or as the log says is it terminated? Though the step changes to green , were all the materials not loaded into planning area?
Please advice and suggest.
Thanks,
Chandra.Hii
This log shows that chain has been successfully terminated. This is a common log
The missing of Open Sales Order Qty for a material may be due to other reason .
Try to get into more details for which Orders this has happened and check in the source system.
Thanks
Sonal... -
CHAIN: custom process type: EVENT: complex status: bad planned jobs
Hi experts,
I've implemented a custom process type (in RSPC/Settings/MaintainProcess) called ZWX_COND.
The main properties of ZWX_COND are: "ZCL_RSPC_DECISION" as ObjectTypeName, "00 ABAP Class" as ObjectType and "(Scheduled) processs ends with complex status" as PossibleEvents.
Class ZCL_RSPC_DECISION is a copy of the standar one CL_RSPC_DECISION. I've only made the necessary changes in methods GET_EVENTS and GET_EVENT (I only need two events) and EXECUTE (to choose one of the two events depending on a customized table).
I've made a main process chain with that new type (a decision step). I've connected that step with the process chain "A" for case 01 and with the process chain "B" for case 02. I've verified the main process chain and all is correct.
Once I've activated and planned the main process chain, un unknown job BI_PROCESS_CHAIN appears. In addition, although the decision step ends correctly (green color) and the event RSPROCESS with parameter XXXX_02 is triggered (it's correct, since it's indicated in that way in the customized table), process chain "B" doesn't start. In fact, neither process chain "A" nor process chain "B" starts. Both process chains remain in yellow color, but the corresponding jobs are not activated or finished, they are just released.
I see that the start condition (event parameter) for the planned jobs corresponding to process chains "A" and "B" is incorrect, since it is XXXX in both cases. I think the condition must be XXXX_01 for process chain "A" and XXXX_02 for process chain "B".
I'd like to implement this process type because I want the process to end with a green status. If I use a custom process type with events "succesfull" or "incorrect", I can make the decision and the chain process works, but the process chain ends with red status when the event triggered is the "incorrect" one.
Please, could somebody help me? I don't know if it's a program error or I'm implementing it in the wrong way.
Thanks in advance,
César Rueda
PS. Sorry by my English
Message was edited by:
César Rueda
Message was edited by:
César RuedaHi,
i am experiencing the same thing .... have you got an answer , i did not see any notes on this type of issue . -
Any ideas for a status or "at a glance" splash screen / presentation?
This is an idea I've been tossing around and wanted to know if there was something easy out there that would accomplish this...
I'd like to mount a monitor in one of our common areas for the management team and have it display current statuses of some of our IT features/services and maybe quick bits on what we are currently working on, major issues, etc...
I've seen some company lobbies with similar setups that display company-wide information, weather, etc.. so I know the capability is out there but I don't know squat regarding what that would entail. The easier, the better, naturally... as I don't want this to turn into an entire job position updating it, haha. But something that I could hopefully remotely update would be nice.
Any ideas? Thanks!
This topic first appeared in the Spiceworks CommunityPlease see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125 -
Hi Experts,
Due to some other reasons we tried clear GR/IR clearing a/c. i will explain clearly.
We have some purchase orders pertaining to 2006 year. we have not done MIGO and we did MIRO, So that we could not able to clear GR/IR A/C. SO, we have posted manual entry with fb50 same as MIGO posting then we cleared both documents with f-03 its done every thing was fine now But if we see purchase order report status showing OPEN
How to change the status please some one let me know.this is high priority issue.
Regards,
JCHi,
First make sure that you will not receive goods against your PO..Then go to me22n and delete the item in your PO.
This will resolve your issue.
Thanks,
Srinu -
Dear Expert.
I want Sales Order Status report as below mentioned format required quarry base report from Date to To Date.
Location-OrderSeries-OrderNo-CardCode-CardName-ItemCode-Item Descripotion-Inv.UOM-Order Qty-Allocated Qty-DeliverQty-Peniding Qty adn Pending Order Value.Hi,
You can check this :
select t3.location as 'Location',t0.series as 'Order Series',
t0.docnum as 'Order No.',t0.cardcode as 'Business Partner Code',
t0.cardname as 'Business Partner Name', t1.itemcode as 'Item',
t1.dscription as 'Item Name', t2.invntryUom as 'Inventory UoM',t1.quantity as 'Order Qty',
t1.QtyToship as 'Allocated Qty- Qty to Ship', t1.delivrdQty as 'Delivered Qty',
t1.OrderedQty as 'Ordered Qty', t1.openCreQty as 'Pending Qty',
t1.Opensum as 'Pending Order Row Value'
from ORDR t0 inner join RDR1 t1 on t1.docentry = t0.docentry
inner join OITM t2 on t2.itemcode = t1.itemcode
inner join OLCT t3 on t3.code = t1.loccode
where t0.docdate >= '2011.01.01' and t0.docdate <= '2011.12.31'
Hope it helps.
Kind Regards,
Jitin
SAP Business One Forum Team -
hi,
How to use PF STATUS IN ALV REPORT?HI,
see this code.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
<b> I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'UCOMM'</b>
I_STRUCTURE_NAME =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVE[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 5
I_SCREEN_START_LINE = 5
I_SCREEN_END_COLUMN = 120
I_SCREEN_END_LINE = 25
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTTOP'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTEND'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
<b>FORM STATUS USING MYMENU.
SET PF-STATUS 'MENU' excluding MYMENU.
ENDFORM.
FORM UCOMM USING CODE STEXT.
CASE CODE.
WHEN 'ABC'.
WRITE:/ 'YOU HAVE CLICKED ON ABC'.
WHEN 'XYZ'.
WRITE:/ 'YOU HAVE CLICKED ON XYZ'.
ENDCASE.
ENDFORM.</b>
rgds,
bharat. -
Sale Order Status Change after delivery of materials from projects
have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
Regards,
RanjanHi,
In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
Thanks & Regards,
Biplab Ranjan -
Sale Order Status after dellivery of materials from Projects
Hi,
I have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
Thank you in advance.
Regards,
RanjanHi,
In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
Thanks & Regards,
Biplab Ranjan -
Report should be pulling information from dispute management. Report should pull all active dispute cases by company code (Company Code and Name should be at the top of the report). Report should show dispute case ID, case status, customer ID, customer name, invoice number (Invoice reference), Invoice date, currency, total currency amount, days overdue, last dunned date, all dispute notes for the case with the dates included, and person responsible (from dispute case).
Please help me what are the tables i have to use in this.
this is the report i have to diplay the output above mentioned fields. Please tell me the relations of the tables.some more dunning related tables.
T040S Blocking reasons for dunning notices
T047D Form selection for legal dunning proceedings
T047E Form selection for dunning notices
T047F Sorting of dunning letters
T047I Standard texts for dunning notices
T047R Grouping rules for dunning notices
TD47D Form selection legal dunning procedure in loans
TD47E Form selection for dunning notices
TDV07 Alloc.of application/role category/dunning param
TDV08 Alloc.of application/role category/dunning param
TZV07 Alloc.of application/role category/dunning param
VDDUNN Dunning run data per loan and dunning run
VDDUNN_DISP Dunning run data per loan and dunning run -
Status of excise invoice is IN PROCESS after all the process is over.
Dear All,
We have done the migo and the Capture the excise invoice also,But still the status of the excise invoice is showing as IN Process.What could be the reason,
Please give the inputs.
Thanks in advance.
deeptiHi,
Check the table entries for the excise invoice. First check the Part II entry correctly made in J_1IPART2 table. And also check the status of the Excise Invoice in tables J_1IEXCDTL, J_1IEXCHDR, J_1IGRXREF is posted or not (P).
If there status P is missing after Part II posting you have to make it as 'P'.
Regards,
Sandeep -
Hi SAPsimhas,
My requirement is as below.
I will loop through an internal table and create some files with background processing method.(JOB_OPEN,SUBMIT & JOB_CLOSE)
Now once this job is triggered I need to check the status for that job after maximum 10 mins. Its not neccessary that each job will take 10 mins. only,It can be finished in 2 mins also.
Once the job is finished then I will XCOM that file.
So my question is how to code such timer which will check the job status for that job? I have a FM BP_JOB_READ which returns the job status.
Reply is highly appriciated.Try this way
do.
call function 'SHOW_JOBSTATE'
exporting
jobcount = p_jobc
jobname = p_jobn
importing
aborted = v_aborted
finished = v_finished
ready = v_ready
running = v_running
scheduled = v_scheduled
exceptions
jobcount_missing = 1
jobname_missing = 2
job_notex = 3
others = 4.
if v_aborted eq 'X'.
exit.
endif.
if v_finished eq 'X'.
select single * from tbtcp into wa_tbtcp1
where jobname eq p_jobn
and jobcount eq p_jobc.
if sy-subrc eq 0.
move wa_tbtcp1-listident to p_spono.
endif.
exit.
endif.
if v_count le 10.
call function 'ENQUE_SLEEP'
exporting
seconds = 60.
v_count = v_count + 1.
endif.
enddo.
a® -
I have been trying for days to help a friend with a new iMac to turn on the icon size slider bar that on my iMac appears at the bottom of ever folder when it is open when in the "view" > "icon" mode. I cannot find anything that discusses this slider bar. I can turn this status bar off and on on both my machine and my friends machine, but I cannot turn off or on the slider on either machine.
This did not help. I am a Mac User since 1984 and generally I am never stymied buy the Mac OS, but this one has me. I can open and close the lower status bar, as you described, and that works fine for me because I have the icon slider bar already there and it works fine; however when I open the lower status bar on my friends machine there is no icon size slider bar, and I can't seem to find out how to get it there, as it is on my machine or at all. The icon size can be controlled from the View menu, but as a photographer, it is really handy to have it at the bottom of the folder window. Thanks for trying.
Maybe you are looking for
-
Get selected text from af:inputText
Hi, I am using an <af:inputText> component, within which I would want to know if any text has been selected. InputText.getValue() would give me the total value that is there within the inputText component. But if I have selected a part of the text, I
-
Apps purchased with a Mac don't show as installed in App Store
This may be related to a question I recently posted about iPhoto, but I think I am beginning to understand the problem better now so will rephrase it here. In 2009 I bought an iMac (a lovely machine with 2.66GHz Intel i5 quad core and 8Gb of memory,
-
I have two email accounts set up on my Mail application. Both pull in and send just fine but ever since I upgrade the exchange sever and re-setup the account It won't show the unread (number) to the right of the inbox? The other one shows up just f
-
Je n'arrives pas à ouvrir iTunes, lorsque que j'essaye un message d'erreur s'affiche : "nouvelle bibliothèque iTunes". Pouvez-vous m'aider ?
-
Two oracle versions on one client
Hello I installed Oracle7 and Oracle8 Client together on the same machine. So far it works well. But when I want to open one of my ODBC Drivers, I4m getting the following error: ODBCADM caused a general protection fault in KRNL386.exe at 0001:243F. I